Tymphany DWHP83 Wireless-module User Manual
Tymphany HK Limited Wireless-module Users Manual
Tymphany >
Contents
- 1. Users Manual (Statement).pdf
- 2. Users Manual.pdf
Users Manual.pdf
Data Sheet
Rev0.1 12/13/2017 Page 1 of 9
DWHP83 Module
Digital Wireless Audio Transceiver
Preliminary Technical Product Specification
Data Sheet
Rev0.1 12/13/2017 Page 2 of 9
Index
1. DWHP83 MODULE .................................................................................................................................... 3
1.1. PRODUCT DESCRIPTION ........................................................................................................................ 3
1.2. BASIC FEATURES................................................................................................................................... 4
1.2.1. High Quality Audio ...................................................................................................................... 4
1.2.2. Networking and Connectivity ...................................................................................................... 4
1.2.3. Coexistence and Robustness ..................................................................................................... 4
1.2.4. Power Management ................................................................................................................... 4
1.2.5. Integrated 8052 MCU ................................................................................................................. 4
1.2.6. Digital Audio Clock Synchronization........................................................................................... 4
2. DWHP83 MODULE SPECIFICATIONS ..................................................................................................... 5
2.1. ABSOLUTE MAXIMUM RATING ................................................................................................................. 7
2.2. RECOMMENDED OPERATING CONDITIONS ............................................................................................... 7
2.3. DC CHARACTERISTICS .......................................................................................................................... 7
2.4. CONNECTOR ELECTRICAL RATING .......................................................................................................... 7
2.5. PIN OUT OF 26PIN HEADER CONNECTOR ................................................................................................. 8
2.6. ANTENNAS ............................................................................................................................................ 9
3. TRANSCEIVER DIMENSION ...................................................................................... 錯誤! 尚未定義書籤。
4. ORDERING INFO ........................................................................................................ 錯誤! 尚未定義書籤。
Data Sheet
Rev0.1 12/13/2017 Page 3 of 9
1. DWHP83 Module
1.1. Product Description
The DWHP83 Module is an OEM module (20x40mm) based on the DARR-83. It is an uncompressed wireless
digital audio transceiver operating in the 5.8GHz band. The wireless audio link supports up to 4 stereo audio
streams and comes together with additional features such as: data encryption, pairing functionality, bi-directional
control data messages, low power audio snooze mode, WLAN detection and Automatic Frequency Allocation.
The DARR83 chip itself provides the basic functions of Audio Processing and buffering, Data Link Layer and
Physical Layer. The module integrates all functionality for a wireless digital audio connection, comprising:
DARR-83 Wireless Audio Processor
5.8 GHz RF Transceiver
Embedded Antennas
Digital audio interfaces (I2S and/or S/PDIF)
I2C control interface
26 pins header connector for power, digital audio and control interface and GPIOs
Data Sheet
Rev0.1 12/13/2017 Page 4 of 9
1.2. Basic Features
1.2.1. High Quality Audio
• Up to four stereo audio channels, fully bidirectional, up to 24-bit/96 ksps uncompressed audio
• Low latency <20ms for real-time audio and lip sync
• Low latency compression algorithm - optimized for voice applications, headphones
• Inter-speaker synchronization; Low-jitter audio clock sync
• Programmable digital audio gain
1.2.2. Networking and Connectivity
• 22Mbps Bandwidth in 5.8 GHz Bands
• Point-to-Point and Point-to-Multipoint
• Bidirectional data channel (100 kbps)
• Simple Pairing and Association Function
• 4 I2S Data pins, each provided with their own pair of BCK/LRCK signals or stereo S/PDIF input/output
• Master and Slave I2C bus for external control functions
1.2.3. Coexistence and Robustness
• Enhanced robustness against both in- and out of band interferers like: Wi-Fi and cordless phones
• Coexistence with 802.11a, b, g and n
• Automatic receiver antenna diversity minimizes fading and multi-path effects
• Link quality monitoring
• Soft audio muting under poor link circumstances
1.2.4. Power Management
• Low power consumption
• Automatic RF output power control
• Power Down Duty Cycle mode: If no link is established, modules (both TX and RX) will enter power down
mode
1.2.5. Integrated 8052 MCU
The DARR83 integrates an 8052 MCU. This includes the following features:
• 45 kByte Code RAM
• 8 kByte Data RAM
• 4 Timer/Counters
• UART
1.2.6. Digital Audio Clock Synchronization
The digital audio clock synchronization is an additional more cost effective method for synchronization of audio
samples on the receiving side with respect to the transmitted audio samples. The digital clock
synchronization feature works for output audio sample rates of 96 and 48 ksps.
Data Sheet
Rev0.1 12/13/2017 Page 5 of 9
2. DWHP83 Module Specifications
System Specifications
ID
Parameter
Value
Unit
Remarks
RF Characteristics
RF frequency range
5736 - 5814
MHz
Number of RF channels
3
In each Frequency band.
Air framing
Addressing
24
Bit
Data message size
32
Byte
Application dependent
CRC
16, 24 and 32
Bit
Hybrid
Control
Control interface
I2C
Compliant with the I2C
protocol (slave),
0…400kbps. Base
address 0x80.
Data
Data Bandwidth
100
Kbps
Bi-directional wireless data
channel
Data latency
5
ms
Minimum under good RF
link conditions for
applications that support
the 100kbps data rate.
Interference Robustness
Fixed frequency devices (e.g.
WLAN, microwave oven)
Fully coexistent1
Frequency hopping devices
(e.g. 5.8GHz cordless phones)
Fully coexistent1
1 Laboratory tests have verified coexistence with interference sources collocated. Exact ranges are scenario dependent (function of latency,
output power, audio compression, etc.). A mix of interference sources is allowed. Interference of fixed frequency devices may result in the
loss of one useable RF channel.
Data Sheet
Rev0.1 12/13/2017 Page 6 of 9
Audio Interface
Available Interface Types
I2S
Can be used simultaneously
Incl. S/PDIF detection.
Audio Quality
Sample rate
48
ksps
Sample width
16 or 24
bit
Latency
20
ms
Configurable from 10 to
23.6ms, depending on the
application.
Dynamic Range
98
146
dB
dB
16 bit 48ksps, A-weighted
24 bit 48ksps, A-weighted
THD+N
-96
-143
dB
dB
16 bit 48ksps
24 bit 48ksps
Frequency response
0
dB
20Hz…22kHz 2
Dimensions
Board dimensions
20 x 40
mm
2 In applications where Digital Clock Sync is not used.
Data Sheet
Rev0.1 12/13/2017 Page 7 of 9
2.1. Absolute Maximum Rating
Symbol
Parameter
Min.
Typ
Max
Unit
VCC
Supply Voltage
3.8
V
Tstorage
Storage Temperature
-25
−
85
°C
VESD
ESD Contact Discharge
-3
−
+3
kV
2.2. Recommended Operating Conditions
Symbol
Parameter
Min.
Typ
Max
Unit
VCC
Supply Voltage
3.3
V
VCC Ripple
Peak to Peak Ripple (In-circuit)
−
0
100
mV
Tamb
Operating Temperature
-10
25
60
°C
2.3. DC Characteristics
All digital IO levels are 3.3V CMOS. The digital IO ports are not 5V compliant.
Please refer to datasheet of DARR83 for more information.
2.4. Connector Electrical Rating
Item
Parameter
Max
Units
Max. Rated Voltage
AC (RMS) / DC
500
V
Max. Rated Current
AC (RMS) / DC
1
A
Data Sheet
Rev0.1 12/13/2017 Page 8 of 9
2.5. Pin out of 26pin header Connector
26 Ways, Male Type Pin Header, 1.27mm pitch, SMT type:
Pin Number
Pin Name
I/O
Description
1
VDD
Power
Regulated 3.3V Input
2
GND
Ground
Ground
3
MCLK
In
12.288 audio clock In
4
DARR83_GPIO_2
I/O
Configurable.
Please refer to the DARR83 datasheet
5
DARR83_GPIO_7
I/O
Configurable.
Please refer to the DARR83 datasheet
6
DARR83_GPIO_4
I/O
Configurable.
Please refer to the DARR83 datasheet
7
DARR83_GPIO_23
I/O
Configurable.
Please refer to the DARR83 datasheet
8
DARR83_GPIO_13
I/O
Configurable.
Please refer to the DARR83 datasheet
9
DARR83_GPIO_3
I/O
Configurable.
Please refer to the DARR83 datasheet
10
DARR83_GPIO_15
I/O
Configurable.
Please refer to the DARR83 datasheet
11,12, 23
GND
Ground
Ground
13
DARR83_GPIO_24
I/O
Serial Async Data,for test purposes
14
DARR83_GPIO_14
I/O
Not Applicable
15
DARR83_GPIO_16
I/O
Configurable.
Please refer to the DARR83 datasheet
16
NC
17
DARR_/RST
In
Active low. Should be connected to a reset IC or to a
pull-up resistor with a capacitor to ground.
18
I2C_SCL_SLV
I/O
I2C serial clock Slave
19
I2C_SDA_SLV
I/O
I2C serial data Slave
20
DARR83_GPIO_12 (SDIO_Z)
I/O
I2S port Z serial data
21
DARR83_GPIO_11_SDIO_X
I/O
I2S port X serial data
22
DARR83_GPIO_10_LRCK_W
I/O
I2S Left Right Clock
24
DARR83_GPIO_8_BCK_W
I/O
I2S Bit Clock
25
DARR83_GPIO_6_SDIO_Y
I/O
I2S port Y serial data
26
DARR83_GPIO_5_SDIO_W
I/O
I2S port W serial data
Note1: the digital IO pins are CMOS 3V3 compliant and not 5V compliant.
Data Sheet
Rev0.1 12/13/2017 Page 9 of 9
2.6. Antennas
The module uses embedded PCB track Dual-Band antennas. RX and TX diversity antennas are used to avoid
dropouts due to multipath fading.
Antenna A (ANT A) fixed track antenna on the module
Antenna B (ANT B) fixed track antenna on the module