Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2634193 |
| Application ID | x73CfQO/RQ48g/plwVcZqw== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 178.91kB (2236342 bits) |
| Date Submitted | 2015-06-02 00:00:00 |
| Date Available | 2015-11-30 00:00:00 |
| Creation Date | 2014-08-11 11:55:03 |
| Producing Software | Adobe PDF Library 10.0.1 |
| Document Lastmod | 2014-08-11 11:55:13 |
| Document Title | Manual |
| Document Creator | Adobe InDesign CS6 (Macintosh) |
User’s Guide 2 CONTENTS Safety Instructions......................................................................................................................................4 Declaration Of Conformity.......................................................................................................................... 5 Quick Setup Guide.......................................................................................................................................6 Overview - EON Family................................................................................................................................8 EON Family - Block Diagram.......................................................................................................................9 EON615 Specifications .............................................................................................................................10 Coverage................................................................................................................................................... 12 Purposeful Product Design.......................................................................................................................13 Back Panel.................................................................................................................................................14 Loudspeaker Placement and Suspension................................................................................................16 Application Examples............................................................................................................................... 17 Trouble Shooting........................................................................................................................................20 Warranty Information............................................................................................................................... 21 Contact Information.................................................................................................................................. 22 SAFETY INSTRUCTIONS Before You Begin - Important Information Before using your EON® speaker system please review the following for important information on safety and protection of your investment in quality loudspeakers. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. D o not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. D o not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. P rotect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. U se only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. R efer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. S ervice Instruction in Owner’s Manual: “CAUTION - THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO.” 16. To completely disconnect this apparatus from the AC mains, disconnect the power supply cord plug from the AC receptacle. 17. “WARNING – TO REDUCE THE RISK OF FIRE OR ELECTRIC – SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.” 18. D o not expose this equipment to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the equipment. 19. The mains plug of the power supply cord shall remain readily operable. DECLARATION OF CONFORMITY Safety And EMC Compliance Specifications EN 55103-1:1997 Electromagnetic Compatibility - Product Family Standard for Audio, Video, Audio-Visual and Entertainment Lighting Control Apparatus for Professional Use, Part 1: Emissions EN 55103-1:1997 Magnetic Field Emissions-Annex A@ 10 cm and 20 cm EN 55022:2003 Limits and Methods of Measurement of Radio Disturbance Characteristics of ITE: Radiated, Class B Limits; Conducted, Class A EN 55103-2:1997 Electromagnetic Compatibility - Product Family Standard for Audio, Video, Audio-Visual and Entertainment Lighting Control Apparatus for Professional Use, Part 2: Immunity EN 61000-4-2: A2:2001 Electrostatic Discharge Immunity (Environment E2-criteria B, 4 kV Contact, 8 kV Air discharge) EN 61000-4-3:2003 Radiated, Radio-frequency, Electromagnetic Immunity (Environment E2, criteria A) EN61000-4-4:2005 Electrical Fast Transient/Burst Immunity (criteria B) EN 61000-4-5:2001 Surge Immunity (criteria B) EN 61000-4-6:1996 Immunity to Conducted Disturbances Induced by Radio-Frequency Fields (criteria A) EN 61000-4-11:2004 Voltage Dips, Short Interruptions and Voltage Variation UL 6500 2nd Edition 1999 Audio/Video and Musical Instruments Apparatus for Household, Commercial, and Similar General Use IEC 60065_2001 / EN 60065_2002 + A1:2006 + A11:2008 UL Compliance Specifications UL 60065 7th Ed. CAN/CSA 22.2 No.60065_2003 FCC Statement IC Warning 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 1. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.” • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body QUICK SETUP GUIDE Congratulations on your purchase of JBL Professional EON600 Series loudspeakers! We know you are anxious to get up and running as fast as possible, which is why you are reading this section. The following will help you get set up as soon as possible. Packaging Contents Your EON600 system should include the following: 1 x EON600 speaker 1 x 10'(3m) IEC Power Cable 1 x Quick Start Guide Unbox it Open the top of the box. Lay box on its side. Turn box upside down, then lift box up to reveal speaker. Configuration Options Floor Standing Monitor Position Pole Mounted Suspended QUICK SETUP GUIDE POWER BLUETOOTH Bluetooth Sync Bluetooth Boot EQ Presets SYNC BOOT ON OFF Front LED On/Off Power Button EQ+ On/Off CH1 & CH2 Gain Limit LED Master Volume FRONT LED MAIN EQ PRESETS MONITOR EQ + SUB SPEECH EON 615 SIGNAL LIMIT GAIN Mic/Line Button XLR-1/4” Combo Inputs XLR Male Loop Thru MIC LINE CH1 GAIN MASTER VOLUME SERIAL NO: MIC CH2 LINE IN 2 IN 1 MODEL: EON615 SIGNAL THRU THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Power Switch Made in Mexico 430W Max 100-120VAC 50/60Hz 230-240VAC 50/60Hz FUSE TYPE: T3.15L250V FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE FUSE ONLY WITH SAME TYPE OF RATING. POWER IT ON JBL PROFESSIONAL NORTHRIDGE, CA. USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA PLUG IN THE INPUTS 1. Turn Channel Gain Controls (K) and Master Volume Control (M) all the way to the left before connecting any inputs 2. Connect XLR or TRS cable from audio source to CH1 or CH2 inputs (E) 3. Select Mic or Line via the Mic/Line Button (D) 1. Confirm the Power Button (I) is in the OFF position. 2. Connect the supplied power cord to the power receptacle on the rear of the speaker. 3. Connect the power cord to an available power outlet. 4. Flip on the Power Switch (G) and press the Power Button (I) to ON position, the White Power LED (H) on back and front of the speaker will illuminate SET OUTPUT LEVEL 1. Using the EQ Preset (C) button, select the appropriate preset to match your application 2. Set the gain level for the input using the Channel Gain (K) controls. A good starting point is to set the pot at 12 o’clock. 3. Slowly turn Master Volume (M) to the right until the desired volume is reached. OVERVIEW - EON FAMILY COMING SOON COMING SOON 10" Two-way multipurpose self-powered sound reinforcement 12" Two-way multipurpose self-powered sound reinforcement 15" Two-way multipurpose self-powered sound reinforcement • 1000 Watt • 26 lbs. / 11.79 kg • 110° H / 60° V Coverage • 1000 Watt • 33 lbs. / 14.96 kg • 100° H / 60° V Coverage • 1000 Watt • 39 lbs. / 17.69 kg • 90° H / 60° V Coverage Thank you for purchasing the new JBL EON! More than just another great JBL sound system, the new EON600 is a true step forward in technology developed specifically to deliver the best sound possible regardless of its application. Completely rethinking how truly good an affordable self-contained, portable PA system can be, JBL engineers purposely designed and built the EON600 from the ground up featuring JBL’s advanced waveguide technology, JBL designed and manufactured transducers, and convenient, wireless remote control of its onboard DSP EQ parameters via Bluetooth. This total redesign of the EON platform leverages the latest technologies in cabinet materials, acoustic science, transducer design and user friendliness that delivers the extraordinary quality of a high-end studio monitor in a fully professional, highly flexible, easy to use, portable system for today’s working musicians and sound providers. With proper care your EON Series speakers should provide you with many years of flawless performance, and are flexible enough to be a part of your sound reinforcement system even as it grows in scope. THRU CH2 CH1 LINE MIC SIGNAL LINE MIC SIGNAL LEVEL 2 LEVEL 1 MASTER VOLUME EON600 BLOCK DIAGRAM EQ+ ON OFF EQ MAIN MONITOR SUB SPEECH LPF HPF DSP LIM LF HF LIMIT EON FAMILY - BLOCK DIAGRAM EON615 SPECIFICATIONS System Specification System Type: Maximum SPL Output: Frequency Range (-10 dB): Frequency Response (±3 dB): EQ: Amplification Amplifier Design: 322 mm System Power Rating: 12.67 in Input Impedance: Line Input Gain: Mic Input Gain: Connectors: LED Indicators: Cooling: AC Power Input: AC Power Consumption (120VAC): Speaker Specification LF Driver: HF Driver: Coverage Pattern: Crossover Frequency: Enclosure Material: Suspension / Mounting: Handles: 380 mm Finish: 14.96 in Grille: Dimensions (H x W x D): Gross Weight: 295 mm 11.61 in Self powered 15”, two-way, bass-reflex 127 dB 39 Hz - 20.3 kHz 50 Hz - 19.8 kHz 558 mm 3 Parametric EQ’s, High and Low Shelf (Available via Bluetooth app only) 21.97 in High Efficiency Class D 1000W Peak (700 LF + 300HF); 500W Continuous (350W LF + 150W HF) 20K ohms (Balanced) Infinity to +26.8dB (+14dBu max input level) Infinity to +29dB (in addition to line input gain) 2 x Balanced XLR-1/4”610 combination inputs; 1 x male XLR loop thru out Power, Bluetooth, EQ Preset, EQ +, Signal CH1, Signal CH2, Limit Passively Cooled (No Fan) 100-120VAC 50/60Hz; 230-240VAC 50/60Hz mm 1/8th Power – 1.14A (Max), 1/4th Power – 1.71A316 (Max), 1/3rd Power – 2.03A (Max) 12.44 in 1 x JBL 615H 380mm (15”) woofer with 2” voice coil 1 x JBL 2414H-1 25.4mm (1”) annular polymer diaphragm, neodymium compression driver 90º H x 60º V 1.8kHz 664 mm 26.14 in Polypropylene, multi-purpose main & monitor 36mm pole socket with stabilizing screw, 3 x M10 suspension points One left, one right, one top, one bottom (4 total) Black Granite Powder coated perforated steel with acoustically transparent screen backing 707mm x 439mm x 365mm (27.8” x 17.3” x 14.4”) 17.69 kg (39 lbs) 612 365 mm 14.4 in 707 mm 27.8 in 439 mm 17.3 in Bottom View 10 Front View 615 Left View Rear View EON615 SPECIFICATIONS Main Sub Speech Monitor Off-Axis 11 COVERAGE EON600 Coverage Pattern Compared to a Typical Speaker TYPICAL EON600 The EON600’s extraordinary performance results from a breakthrough approach to waveguide design. JBL engineers examined the radiation characteristics of the EON’s high and low frequency drivers at 36 different points employing JBL’s exclusive, state of the art measurement techniques, then designed individual waveguides for both components that control the sound radiation at the high frequencies, the crossover point and at the low frequencies. Special fluting is designed into the structure that guides the frequencies through the full range of the system. The result is consistent response throughout its 90 degree coverage pattern. The quality and consistency between on axis and off axis response delivers uniform coverage and high intelligibility throughout the coverage area, which means the EON600’s smooth, transparent sound is the same for the entire audience. 90°H / 60°V Coverage through Revolutionary Waveguides 12 Image Control Waveguide Low Frequency Waveguide Increased High Frequency detail. The Image Control Waveguide’s patent-pending design precisely controls the sound emanating from the EON600 in the vertical and horizontal planes ensuring the representation of your mix is neutral and accurate at the listening position. JBL’s ground breaking new low frequency waveguide features special fluting that is designed into the structure that guides the frequencies through the full range of the system. PURPOSEFUL PRODUCT DESIGN Portability made easy Enclosure designs have been optimized for ideal acoustic resonance taking advantage of injection molding techniques and mechanical shaping of the enclosures. This results in tremendous increases in cabinet volumes which enable better acoustic performance while maintaining the same footprint. Four intelligently positioned handles make the 600 easy to carry and move around. Integrated hardware mounts, designed into the enclosures, allow each model to be flown when required. And indexed feet molded into the enclosures allow for convenient storage and transport, secure stacking for stage monitor and traditional stand up configurations, and unique acoustic configurations. Bottom Handle & Locking Feet Top Handle & Indexed Molding Top Handle Side Handle Secure Stacking Monitor Position 13 BACK PANEL Bluetooth Sync POWER BLUETOOTH Front LED On/Off SYNC Bluetooth Indicator Power LED BOOT ON OFF FRONT LED Bluetooth Boot MAIN EQ PRESETS MONITOR EQ Presets EQ + EQ+ Button SUB Ch1 & Ch2 Signal Indicators SPEECH Limit Indicator SIGNAL Mic/Line Toggle LIMIT GAIN MIC LINE CH1 Master Volume SIGNAL Ch1 & Ch2 Gain GAIN MASTER VOLUME MIC CH2 LINE XLR-1/4" Combo Inputs IN 2 IN 1 XLR Male Loop Thru MODEL: EON615 SERIAL NO: THRU THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Power Switch Made in Mexico 430W Max 100-120VAC 50/60Hz 230-240VAC 50/60Hz FUSE TYPE: T3.15L250V FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE FUSE ONLY WITH SAME TYPE OF RATING. 14 JBL PROFESSIONAL NORTHRIDGE, CA. USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA BACK PANEL Bluetooth Sync XLR Male Loop Thru Depress this button in order to initiate pairing with your This XLR (male) output connector provides a method of sending audio Bluetooth enable device. out to an external source. If signal is present on both inputs, the inputs will be summed and sent out as a 50/50 mix Bluetooth Indicator This LED will illuminate blue to indicate that your Bluetooth Power Switch connection is established. Enables the AC power to the unit on and off. Bluetooth Boot Power LED Depress this button to reset the pairing with your Bluetooth enabled device This LED (White) lights to indicate that the speaker is plugged in and without having to turn the speaker off. switched ON. EQ Presets Front LED On/Off Use this button to toggle through the four different settings. Toggles the LED (Blue) on front of speaker On or Off. MAIN: Setting for use as your main speaker facing towards your audience. EQ+ Button MONITOR: Once enabled via the app, the EQ+ toggles the applied EQ settings on/off. Use this setting when your speaker is used as a monitor facing towards you. CH1 & CH2 Signal Indicators SUB: The SIGNAL LEDs (Green) illuminates to indicate a usable signal is This setting is used when your EON600 is used in conjuntion present at connected INPUTS. with a separate SubWoofer. SPEECH: Limit Indicator Best setting for giving speeches and spoken word. The LIMIT LED (Red) illuminates to indicate that the system is approaching Mic/Line Toggle limit. If this LED is on for more than the duration of brief dynamic peaks, the system is being over-driven. Continuously over-driving the system will result in The MIC/LINE buttons selects between two sensitivity ranges. The buttons unpleasant and fatiguing distortion and may lead to premature failure of your are used to match the input sensitivity with the output level of the devices speaker system. connected to CH1 or CH2. Depressing the MIC/LINE switch selects MIC (High Sensitivity). Master Volume Controls the master volume of the unit. By turning the knob counter-clockwise CAUTION: Before adjusting this switch, be certain to rotate the control fully counter-clockwise. After you will be lowering the overall volume of the speaker. By turning the control the MIC/LINE switch has been depressed, slowly rotate the control clock-wise until the desired clockwise you will be increasing the overall volume of the speaker. volume has been reached. • Use the MIC position (depressed) when a microphone is connected. CH1 & CH2 Gain • Use the LINE position (disengaged) when a line level source such as an audio mixing Controls the gain of CH1 & CH2 respectively. By turning the signal counter- console, audio playback device or electronic musical instrument is connected. clockwise you will be lowering the gain of your source material. By turning the XLR-1/4” Combo Inputs control clockwise you will be increasing the gain. These balanced inputs accepts a standard XLR (female) connector and also a 1/4” TRS phone plug. A broad range of signals from microphones, audio mixing consoles and electronic musical instruments may be connected here. The sensitivity of these inputs are controlled by the MIC/LINE SWITCHES. 15 LOUDSPEAKER PLACEMENT AND SUSPENSION Suspended Floor Monitor Floor Standing Tripod Stand Stacking Pole Mount The following guidelines will help you achieve optimum sound wherever you use your EON ® loudspeakers: Raise the speakers as high as possible. For best results try to get the high frequency horn at least 2 to 4 feet above the heads of the audience. If the speakers are too low, the people in the back of the audience will not receive the best quality sound. Place the speakers between the microphones and the audience. Feedback occurs when the microphones pick up sound from the speakers and “feed” the sound back through the sound system. If space is limited, point the speakers away from the microphones to reduce feedback. Locate the speakers away from turntables. Low-frequency feedback occurs when the output of the speaker is picked up by the tone arm of the turntable and is reamplified. A heavy, solid turntable base and shock mounting can also reduce this type of feedback in DJ applications. Use more speakers in large or highly reverberant spaces. Spreading speakers throughout these spaces will produce much better sound than trying to compensate with loudness level or equalization. For very long distances, the use of another set of speakers with time delay is recommended. Stand speakers upright for PA - Tilt the speakers back on the side for stage monitoring. Upright stance provides even coverage over a wide area. EON speakers are also designed with two slanted positions for stage monitoring applications. 16 APPLICATION EXAMPLES POWER BLUETOOTH SYNC BOOT ON OFF FRONT LED MAIN EQ PRESETS MONITOR EQ + SUB SPEECH POWER BLUETOOTH SIGNAL LIMIT SIGNAL SYNC BOOT GAIN MIC LINE CH1 ON GAIN MASTER VOLUME OFF FRONT LED MIC CH2 MAIN LINE EQ PRESETS MONITOR EQ + SUB SPEECH IN 2 IN 1 MODEL: EON615 SERIAL NO: THRU SIGNAL THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. LIMIT SIGNAL MASTER VOLUME CH2 GAIN MIC Made in Mexico 430W Max LINE CH1 GAIN MIC LINE JBL PROFESSIONAL 100-120VAC 50/60Hz 230-240VAC 50/60Hz NORTHRIDGE, CA. USA FUSE TYPE: T3.15L250V FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE FUSE ONLY WITH SAME TYPE OF RATING. A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA IN 2 IN 1 MODEL: EON615 SERIAL NO: THRU THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Made in Mexico 430W Max 100-120VAC 50/60Hz 230-240VAC 50/60Hz FUSE TYPE: T3.15L250V FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE FUSE ONLY WITH SAME TYPE OF RATING. JBL PROFESSIONAL NORTHRIDGE, CA. USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA SMALL PA USING BOTH INPUTS AND THRU FUNCTION CH1 input set to “Mic” CH2 input set to “Line” EQ Preset: Main 17 APPLICATION EXAMPLES POWER BLUETOOTH POWER BLUETOOTH SYNC SYNC BOOT ON BOOT OFF ON FRONT LED EQ PRESETS MONITOR SIGNAL CH1 SERIAL NO: EQ + MONITOR SUB SPEECH SPEECH LIMIT SIGNAL MASTER VOLUME CH2 SIGNAL GAIN MIC LINE LINE CH1 SIGNAL MASTER VOLUME CH2 GAIN THRU SERIAL NO: THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THRU Made in Mexico 430W Max JBL PROFESSIONAL 100-120VAC 50/60Hz 230-240VAC 50/60Hz NORTHRIDGE, CA. USA FUSE TYPE: T3.15L250V FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE FUSE ONLY WITH SAME TYPE OF RATING. FUSE TYPE: T3.15L250V FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE FUSE ONLY WITH SAME TYPE OF RATING. A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA SMALL PA USING TWO SYSTEMS AS MONITORS CH1 input set to “Mic” CH2 input set to “Line” EQ Preset: Monitor 18 LINE THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Made in Mexico 430W Max 100-120VAC 50/60Hz 230-240VAC 50/60Hz MIC IN 2 IN 1 MODEL: EON615 EQ + LIMIT GAIN MIC IN 2 IN 1 MODEL: EON615 MAIN EQ PRESETS SUB GAIN MIC LINE OFF FRONT LED MAIN JBL PROFESSIONAL NORTHRIDGE, CA. USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA APPLICATION EXAMPLES POWER BLUETOOTH POWER BLUETOOTH SYNC SYNC BOOT ON BOOT OFF ON FRONT LED EQ PRESETS MONITOR SIGNAL CH1 SERIAL NO: EQ PRESETS EQ + MONITOR SUB SPEECH SPEECH LIMIT SIGNAL MASTER VOLUME CH2 SIGNAL GAIN MIC LINE LINE CH1 SIGNAL MASTER VOLUME CH2 GAIN THRU MODEL: EON615 SERIAL NO: JBL PROFESSIONAL 100-120VAC 50/60Hz 230-240VAC 50/60Hz NORTHRIDGE, CA. USA FUSE TYPE: T3.15L250V FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE FUSE ONLY WITH SAME TYPE OF RATING. LINE THRU THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Made in Mexico 430W Max MIC IN 2 IN 1 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. EQ + LIMIT GAIN MIC IN 2 IN 1 MODEL: EON615 MAIN SUB GAIN MIC LINE OFF FRONT LED MAIN A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA Made in Mexico 430W Max 100-120VAC 50/60Hz 230-240VAC 50/60Hz FUSE TYPE: T3.15L250V FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE FUSE ONLY WITH SAME TYPE OF RATING. JBL PROFESSIONAL NORTHRIDGE, CA. USA A HARMAN INTERNATIONAL COMPANY DESIGNED AND ENGINEERED IN THE USA SMALL PA USING EXTERNAL MIXER CH1 & CH2 Mic / Line inputs set to “Line” EQ Preset: Main 19 TROUBLE SHOOTING Symptom Likely Cause What to do No sound Speaker not connected to active AC power Verify that speaker is connected and that the circuit is on Power not switched on Switch on power and verify that power LED is on Speaker power cable is faulty or improperly connected. • Re-seat the power cable at both ends. • Substitute a known-good power cable Signal source (mixer, instrument, etc.) is not sending. • Check VU meters on the source mixer • Verify that the tape or CD is playing. • Use headphones to verify that the instrument is actually sending an audio signal Faulty cables and connections • Disconnect and re-seat signal cables. • Replace suspected cable with a known-good cable No sound with microphone connected directly to the MIC/ LINE input. Microphone requires phantom power The EON does not supply phantom power. Switch to a dynamic microphone, use a battery powered microphone (if possible), use an external phantom power supply for condenser type microphones. Signal sounds distorted and very loud, PEAK light is lit most of the time. Excessive input signal, trying to exceed the capabilities of the speakers • Reduce the output level of the source. • Turn down the level controls on the speaker. • Use additional EON speakers. Signal sounds distorted even at moderate volumes, LIMIT light is not lit. Mixer or other source is overdriven Review the Owner’s Manual for your mixer and adjust controls as needed. • Input sensitivity (gain) • Channel faders • Master faders Once this is done, review the instructions in the Quick Start section of this guide. Lots of hiss in the sound, the mixer controls are at very low settings. Improper gain structure • Make sure that the MIC/LINE switch is in the LINE (disengaged) position. • Reduce the level settings at speaker. Review the Owner’s Manual for your mixer and adjust controls as needed. • Input sensitivity (gain) • Channel faders • Master faders Noise or hiss heard at output. Noisy source device Disconnect the devices that are connected to your speaker one at a time. If the noise goes away, the problem is with the source or the connecting cable. Improper A/C ground or faulty equipment connected to mixer input Disconnect or mute channels one at a time to isolate the problem. Refer to the owner’s manual of the faulty equipment for troubleshooting help. Faulty cable between source equipment and mixer Substitute a known-good cable for the suspected faulty cable. Improper A/C grounding, ground loops • ‘Lift’ the audio ground by using an XLR/F to XLR/M adapter on one end. • Re-route audio cables away from AC power and lighting cables. Excessively long unbalanced cable run • Use the balanced outputs (if available) of your mixer or source equipment to drive your EON speakers. • Use a “DI” (direct injection) box to convert your unbalanced equipment output to a balanced output. Improper system gain structure Reduce the INPUT level controls and increase the output level of your source devices. No sound, speaker is connected to working AC power but won’t come on. No sound. Speaker comes on. Hum or Buzz that increases or decreases when the mixer level controls are moved. Hum or Buzz 20 WARRANTY INFORMATION The JBL Limited Warranty on professional loudspeaker products (except for enclosures) remains in effect for five years from the date of the first consumer purchase. JBL amplifiers are warranted for three years from thedate of original purchase. Enclosures and all other JBL products are warranted for two years from the date of original purchase. Who Is Protected By This Warranty? Your JBL Warranty protects the original owner and all subsequent owners so long as: A.) Your JBL product has been purchased in the Continental United States, Hawaii or Alaska. (This Warranty does not apply to JBL products purchased elsewhere except for purchases by military outlets. Other purchasers should contact the local JBL distributor for warranty information.); and B.) The original dated bill of sale is presented whenever warranty service is required. What Does The JBL Warranty Cover? Except as specified below, your JBL Warranty covers all defects in material and workmanship. The following are not covered: Damage caused by accident, misuse, abuse, product modification or neglect; damage occurring during shipment; damage resulting from failure to follow instructions contained in your Instruction Manual; damage resulting from the performance of repairs by someone not authorized by JBL; claims based upon any misrepresentations by the seller; any JBL product on which the serial number has been defaced, modified or removed. Who Pays For What? JBL will pay all labor and material expenses for all repairs covered by this warranty. Please be sure to save the original shipping cartons because a charge will be made if replacement cartons are requested. Payment of shipping charges is discussed in the next section of this warranty. How To Obtain Warranty Performance If your JBL product ever needs service, write or telephone us at JBL Incorporated (Attn: Customer Service Department), 8500 Balboa Boulevard, PO. Box 2200, Northridge, California 91329 (818/893-8411). We may direct you to an authorized JBL Service Agency or ask you to send your unit to the factory for repair. Either way, you’ll need to present the original bill of sale to establish the date of purchase. Please do not ship your JBL product to the factory without prior authorization. If transportation of your JBL product presents any unusual difficulties, please advise us and we may make special arrangements with you. Otherwise, you are responsible for transporting your product for repair or arranging for its transportation and for payment of any initial shipping charges. However, we will pay the return shipping charges if repairs are covered by the warranty. Limitation of Implied Warranties ALL IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE LENGTH OF THIS WARRANTY. EXCLUSION OF CERTAIN DAMAGES JBL’S LIABILITY IS LIMITED TO THE REPAIR OR REPLACEMENT, AT OUR OPTION, OF ANY DEFECTIVE PRODUCT AND SHALL NOT INCLUDE INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS AND/OR DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY, FROM STATE TO STATE. JBL Professional 8500 Balboa Blvd. Northridge, CA 91329 USA 21 CONTACT INFORMATION Mailing Address: JBL Professional 8500 Balboa Blvd. Northridge, CA 91329 Shipping Address: JBL Professional 8500 Balboa Blvd., Dock 15 Northridge, CA 91329 (Do not return product to this address without first obtaining prior authorization from JBL) Customer Service: Monday through Friday 8:00am -5:00pm Pacific Coast Time in the U.S.A. (800) 8JBLPRO (800.852.5776) www.jblproservice.com On The World Wide Web: www.jblpro.com Professional Contacts, Outside the USA: Contact the JBL Professional Distributor in your area. A complete list of JBL Professional international distributors is provided at our U.S.A. website: www.jblpro.com 22 23 Part Number: 5032132 8/14 8500 Balboa Boulevard Northridge, CA 91329 USA www.jblpro.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Instance ID : uuid:33f3fe52-6497-9c4f-9d90-83cbb0c95ce1 Original Document ID : adobe:docid:indd:1578b125-4570-11e0-aea6-f7cf13df9faa Document ID : xmp.id:2BAE752F42226811822ACDE4E05516F1 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:2AAE752F42226811822ACDE4E05516F1 Derived From Document ID : xmp.did:2E6ED6DC3D226811822ACDE4E05516F1 Derived From Original Document ID: adobe:docid:indd:1578b125-4570-11e0-aea6-f7cf13df9faa Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Macintosh) History Changed : / History When : 2014:08:11 11:55:03-07:00 Create Date : 2014:08:11 11:55:03-07:00 Modify Date : 2014:08:11 11:55:13-07:00 Metadata Date : 2014:08:11 11:55:13-07:00 Creator Tool : Adobe InDesign CS6 (Macintosh) Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 24 Creator : Adobe InDesign CS6 (Macintosh)EXIF Metadata provided by EXIF.tools