U MEDIA Communications BHP210 Bluetooth Internet Telephony Handset User Manual BHP Installation Guide v02 draft

Download:
Mirror Download [FCC.gov]
Document ID	632343
Application ID	i0MJ4ZTGxnLOMuaNBMmO9A==
Document Description	Manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	235.3kB (2941248 bits)
Date Submitted	2006-02-28 00:00:00
Date Available	2006-02-28 00:00:00
Creation Date	2006-02-27 18:39:02
Producing Software	Acrobat PDFWriter 5.0 for Windows NT
Document Lastmod	2006-02-28 08:35:08
Document Title	BHP_Installation Guide_v02_draft_.doc
Document Creator	BHP_Installation Guide_v02(draft) - Microsoft Word
Document Author:	joy

User Manual
v0.1
Bluetooth Internet Telephony Handset
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
This device complies with FCC RF Exposure limits set forth for an uncontrolled
environment, under 47 CFR 2.1093 paragraph (d)(2).
This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
This equipment has been SAR-evaluated for Normal condition.
The Max. SAR value is 0.421W/Kg.
Chapter 1: Getting to know the Telephone Kit ................................................ 4
Minimum System Requirements .................................................................................. 4
Unpacking and Checking the Contents ........................................................................ 4
Identifying Components ............................................................................................... 4
Chapter 2: Getting Started.............................................................................. 6
Setting up the telephone kit.......................................................................................... 6
Software Installation..................................................................................................... 6
Using the telephone kit................................................................................................. 8
Chapter 3: Exploring the Telephone kit Menu ................................................. 8
Icons shown on the Handset........................................................................................ 8
Function Keys: ............................................................................................................. 9
Configurations.............................................................................................................. 9
Chapter 4: Guide to Basic Functions ............................................................ 10
How to make a call?................................................................................................... 10
How to answer a call? ................................................................................................ 10
How to make a conference call? ................................................................................ 10
How to redial the last call? (to be implemented) .........................................................11
How to redial any call from Call List? ..........................................................................11
Appendix ...................................................................................................... 12
Troubleshooting ......................................................................................................... 12
Chapter 1: Getting to know the Telephone Kit
Minimum System Requirements
PC running Windows XP, 2000
Skype is installed
At least 400 MHz processor
At least 128 MB RAM
At least 50MB free disk space on your hard drive
Unpacking and Checking the Contents
Packing content
n BHP-210 Blutooth VoIP Phone
n BUB-211 High Power Bluetooth USB Adapter
n 700 mAh Li-on battery
n 100 cm USB cable (mini-USB to B-type connector)
n Quick guide
n CD (with software, driver, utility and user guide)
Identifying Components
BHP-210
Front View
Back View
BUB-211
Chapter 2: Getting Started
Setting up the telephone kit
1. Place the included 700 mAh Li-on battery into the BHP-210’s battery compartment
2. Connect USB cable to charge battery pack (please let the battery charge for a full 6
hours before using the phone for the first time)
Software Installation
1. Turn on your PC
2. Please insert the Utility CD into CD-ROM drive, and then follow the instruction below to
install Bluetooth software.
Note: DO NOT plug the USB Adapter into the USB port before software installation
3. Follow the directions on your screen to install the software.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
XMP Toolkit                     : 3.1-702
Modify Date                     : 2006:02:28 08:35:08-08:00
Create Date                     : 2006:02:27 18:39:02+08:00
Metadata Date                   : 2006:02:28 08:35:08-08:00
Format                          : application/pdf
Document ID                     : uuid:4591f7f9-8a11-4992-b6bd-cfec755ac9b5
Instance ID                     : uuid:1b3ce76f-3241-4e9d-af8f-61f6edc36dcc
Has XFA                         : No
Page Count                      : 6
Author                          : joy
Creator                         : BHP_Installation Guide_v02(draft) - Microsoft Word
Producer                        : Acrobat PDFWriter 5.0 for Windows NT
Title                           : BHP_Installation Guide_v02_draft_.doc

EXIF Metadata provided by EXIF.tools