UBS Axcera LU100AT 100-Watt UHF Transmitter User Manual innovator lx 6kw indd

Download:
Mirror Download [FCC.gov]
Document ID	377410
Application ID	QC713b4X7M+PFd56CshcQg==
Document Description	Data Sheet
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	16.16kB (201941 bits)
Date Submitted	2003-12-02 00:00:00
Date Available	2004-01-28 00:00:00
Creation Date	2003-11-06 16:24:38
Producing Software	Adobe PDF Library 5.0
Document Lastmod	2003-11-18 14:05:42
Document Title	innovator_lx_6kw.indd
Document Creator	Adobe InDesign 2.0.1

Innovator LX (Preliminary)
Low Power Transmitter 10W-6kW
Designed to provide broadcasters with a product that will meet their needs like
no other solution on the market, this new low to medium power transmitter
line uses the latest LDMOS devices for broadband operation across the entire
UHF band. This allows users to minimize spare parts stock, which is especially
important to group owners and networks, and also enables simple and
inexpensive channel changes.
The very compact and completely modular design uses a chassis/backplane
configuration with parallel amplifier and power supply modules that can be
removed and replaced while the transmitter is on the air. Additionally, the
Innovator LX series was designed to be field upgradable to digital operation.
Configurations are available in power levels from 10 watts to 6 kilowatts
analog and up to 3 kilowatts DTV, and all are manufactured in the USA by
Axcera - The RF Experts.
Innovator LX (Preliminary)
Low Power Transmitter 10W - 6kW
Visual Performance
Visual Performance (continued)
Frequency Range
470 to 806 MHz
Carrier Stability (Transmitters)
Standard
±1 kHz
Optional
±350 Hz
w/PFC
±1Hz
Frequency Translation Stability (Translators)
Standard
±1 kHz
Optional
±350 Hz
w/PFC
±1Hz
Regulation of RF Output Power
3%
Output Variation (Over 1 Frame)
2%
Sideband Response
-1.25 MHz and below
-20 dB
-0.75 to -0.5 MHz
+0.5 db, -2 dB
-0.5 to +3.58 MHz
±0.5 dB
+3.58 MHz to +4.18 MHz
+0.5, -1.0 dB
Freq Response vs. Brightness
±0.5 dB
Visual Modulation Capability
1%
Differential Gain
5%
Incidental Phase Modulation
±3°
Linearity (Low Frequency)
5%
Differential Phase
Signal-to-Noise Ratio
2t K-Factor
Noise Factor (Translators)
w/Input Preamp
Input Dynamic Range (Translators)
w/Input Preamp
Env. Delay (Transmitters)
Video Input (Transmitters)
Harmonics
Intermodulation Products
Spurious (›3 MHz from channel edge)
100W and lower
Greater than 100W
Aural Performance
Frequency Deviation Capability
(Transmitters)
Distortion
FM Noise
AM Noise
Aural to Visual Separation
±3°
55 dB
2%
5 dB (Max)
3 dB (Max)
-60 dB to
-15 dBm
-75 dBm
to -30 dBm
Per FCC Standard
75 ohms
(Loop through)
-60 dB or better
-52 dB or better
±75 kHz
0.5%
-60 dB
-55 dB
4.5 MHz
± 100Hz
Composite Audio Input (Multi-channel sound)
(Transmitters)
Input Level
1V peak,
nominal
75 ohms,
unbalanced
Input Impedance
Frequency Range
±0.1 dB response
±0.5 dB response
Monaural Audio Input (Transmitters)
Input Level
Input
-50dB or better
-60dB or better
Freq Range (±0.5 dB resp.)
Pre-emphasis
Subcarrier Input (Transmitters)
Input Level
Input Impedance
Freq Range (±0.5 dB resp.)
50 Hz to 50 kHz
30 Hz to 120 kHz
0 to +10 dBm
600 ohms,
balanced
30 Hz to 15 kHz
75µs
1V peak,
nominal
75 ohms,
unbalanced
20 kHz to
120 kHz
General
Model Number*
LU10Ax LU100Ax
LU250Ax
LU500Ax
LU1000Ax
LU2000Ax
LU3000Ax
LU4000Ax
LU5000Ax
LU6000Ax
Power Output (Watts)
Visual (Peak)
Aural (Avg.)
10
100
10
Output Connector
Power Consumption (Watts)
250
675
250
25
7/ ” EIA
1100
500
50
7/ ” EIA
1900
1000
100
7/ ” EIA
3500
2000
200
7/ ” EIA
6700
3000
300
31/8” EIA
10,250
4000
400
31/8” EIA
13,500
5000
500
31/8” EIA
16,700
6000
600
31/8” EIA
19,900
Input Power
Line Voltage (Volts)
Power Requirements
117/230 ±10%
Size (H x W x D)
230 ± 10%
Single Phase, 50 or 60 Hz
8.75”x19”x23”
55”x22”x34”
76”x22”x34”
76”x44”x34”
(Chassis Only)
Weight (lbs.)
45
45
340
360
Operational Temperature Range
400
550
700
1030
1180
1330
0 to +50°, derate 2°C/1000 ft.
Maximum Altitude 3
8500 feet (2600m) AMSL
Operational Humidity Range
0% to 95% non-condensing
RF Load Impedance
50 Ω
* For transmitters use “T” suffix, translators use “L” suffix (ex. LU100AT - 100W Transmitter)
Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, Axcera reserves the right to
change specifications without prior notice. At any time, you may verify product specifications by contacting our office. Axcera views it’s patent portfolio as an important
corporate asset and vigorously enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents.
0311R3
© 2003 AXCERA
All Rights Reserved
An Equal Opportunity Employer
A Platinum Equity Company

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2003:11:18 14:05:42-05:00
Create Date                     : 2003:11:06 16:24:38Z
Producer                        : Adobe PDF Library 5.0
Creator                         : Adobe InDesign 2.0.1
Trapped                         : False
Page Count                      : 2
Creation Date                   : 2003:11:06 16:24:38Z
Mod Date                        : 2003:11:18 14:05:42-05:00
Metadata Date                   : 2003:11:18 14:05:42-05:00
Document ID                     : adobe:docid:indd:47a47c62-11d8-11d8-8073-f45d7189a464
Version ID                      : 1
Rendition Class                 : proof:pdf
Rendition Of Document ID        : adobe:docid:indd:47a47c62-11d8-11d8-8073-f45d7189a464
Rendition Of Version ID         : 1
Rendition Of Rendition Class    : default
Format                          : application/pdf
Title                           : innovator_lx_6kw.indd
Tagged PDF                      : Yes

EXIF Metadata provided by EXIF.tools