UCLOUDLINK NETWORK TECHNOLOGY ELTP18A04 Smart phone User Manual P3

HONGKONG UCLOUDLINK NETWORK TECHNOLOGY LIMITED Smart phone P3

User Manual

Download: UCLOUDLINK NETWORK TECHNOLOGY ELTP18A04 Smart phone User Manual P3
Mirror Download [FCC.gov]UCLOUDLINK NETWORK TECHNOLOGY ELTP18A04 Smart phone User Manual P3
Document ID3990054
Application IDWaMaJlPyOpDTgm/vV9r5tQ==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize204.34kB (2554189 bits)
Date Submitted2018-09-04 00:00:00
Date Available2018-09-08 00:00:00
Creation Date2018-08-15 17:19:28
Producing SoftwareAdobe PDF library 15.00
Document Lastmod2018-08-29 11:07:56
Document TitleP3说明书_英文版
Document CreatorAdobe Illustrator CC 22.0 (Windows)

Notes
·This user manual is specifically designed to guide you through the
functions of your mobile phone.
·We comply with the sustainable development strategy, therefore
reserve the right to change the functions, interface or appearance
of the product at any time without prior notice.
·In the event of the GlocalMe Connect software becoming
unresponsive, due to upgrade or any unforeseen reason, the normal
operations of the mobile phone will be unaffected.
·Please follow the normal procedure to turn off your mobile phone
and install SIM card; avoiding damage to SIM card or mobile phone.
·This product utilizes built-in customized ROM, developed by
uCloudlink and GlocalMe. Customized functions and product failure
may occur if you root the ROM system or break code to change
system files. Therefore, uCloudlink shall reserve the right to reject
warranty claims for mobile phone malfunctions, caused by arbitrary
rooting.
·For more product information and services please refer to
http://www.glocalme.com
GlocalMe User Manual
loss on listed items.
·Do not place mobile phones in environments with temperatures
exceeding 40°C, such as balconies and direct sunlight.
·Never use mobile phones in thunderstorms in order to avoid potential
lightning strikes and other injures.
·Do not attempt to disassemble mobile phones, or repair mobile
phones and accessories by yourself.
·Do not use any charger specified by nonmobile phone manufacturers
to avoid potential danger.
·Wipe the mobile phone with an anti-static cloth. Do not use
electrostatic cloth to wipe the mobile phone.
·Avoid using harsh chemicals or strong detergents containing
corrosive ingredients, which may damage the chassis.
·LCD displays and other components are fragile and easily scratched;
avoid contact with sharp or abrasive objects.
·If your mobile phone, charger or accessories don’t operate normally,
please contact uCloudlink customer service on (+86 400-699-1314)
for help.
Potentially Explosive Environments
·Once entering potentially explosive environment (such as a gas
station) or its perimeter, please turn your mobile phone off and
abide by all safety signs and instructions. Sparks or electric waves,
produced by mobile phones in such areas, may cause an explosion
or fire.
Safety Precautions & User Guide
·For safety concerns and effective operation of your mobile phone,
please read the following information carefully, which can be
helpful to guide you to comply with the terms of the warranty and
extend the life of your mobile phone.
·In order to avoid possible hearing damage, do not listen at high
volume levels for long periods.
Using Mobile Phone, Charger and Other Accessories
·Please turn off mobile phone at locations with official notice or
prohibition (airport, gas station, hospital, etc).
·Keep mobile phones and accessories out of reach from children.
·Avoid your mobile phone and its accessories coming in contact with
liquid or humid environments.
·Avoid placing your mobile phone in extreme heat or cold
environments.
·Avoid placing mobile phones near open flames.
·Do not paint the mobile phone.
·Avoid dropping, throwing or bending mobile phones.
·Avoid storing mobile phones with computer disks, travel cards,
credit cards or any other magnetic objects to prevent potential data
Airplane
·The wireless device can interfere with aircraft navigation systems;
please comply with the relevant provisions of the airline and do not
use the device in ‘wireless device’ prohibited areas.
Hospital
·When entering hospitals, please turn off your mobile phone and
follow all the safety signs and instructions. Radio waves from mobile
phones may affect the normal operation of electronic medical
equipment and even affect the work of cardiac pacemakers.
·If you have a pacemaker, place your phone onto the opposite ear to
the pacemaker. Always maintain a minimum separation distance of
15cm between the phone and pacemaker. If you are concerned that
interference has occurred, please turn off your phone immediately
and move it to a distant location, and contact your heart specialist
for details. For other medical devices or implants such as hearing
aids, please consult the manufacturer.
Your mobile phone
Battery charging: the battery of the mobile phone is a built-in
battery; please do not disassemble the battery. Insert the small end
13
of the charging data cable into the I/O interface of the mobile phone;
connect the other end of the charging data cable into the travel
charger, then plug in the charger to an electrical outlet to start
charging the battery. When the battery is fully charged, unplug the
charger from the power outlet. If the battery is left unused for a long
Driving
·Your primary responsibility when driving is the safe operation of
your vehicle and concentration on the road.
·When receiving an incoming call while driving, leave the road and
park before answering. It is recommended that you use a
‘hands-free’ device when driving, if permitted to, according to the
driving laws and regulations of your country.
time, it will gradually discharge and must be recharged before use, to
ensure normal function.
Note: the data cable can be inserted into an electric USB socket to
charge battery, but the charging process will be slower.
Tips: the battery icon in the tray can indicate the power information. When the
battery is too low, the phone will automatically turn off, please charge the battery.
If the battery is seriously insufficient, the charging state may not be displayed
immediately (wait for a moment to check). Using the mobile phone to play games
Children Safety
·Keep mobile phones and all related accessories out of the reach of
children. Do not allow children to use mobile phones or related
accessories, which may injure them or others. Some small
components in the mobile phone or its accessories may be
disassembled and dangerous if swallowed.
during the charging process may lead to low battery and automatic power off.
14
10 11
1.
2.
3.
4.
5.
6.
7.
Original Accessories
·Charger: connect the AC charger to the specified power supply.
Make sure the cable is in the correct position; refrain from
stretching the cable. In order to avoid the risk of electric shock,
disconnect the charger or cable from the power supply, before
cleaning the device. The charger is designed for indoor use only
and not to be used outside or in a damp environment.
·Battery: the mobile phone has an integrated battery; do not
disassemble. Charge the battery only at temperatures between -10°
SIM card: You can conduct some operations without the SIM card,
but the communication function can only be realized by inserting the
SIM card. In the absence of SIM card, if you are in the network
coverage, the mobile phone can choose any network to register and
make emergency calls supported by the network operator. For
specific emergency numbers supported, please consult network
operators.
Inserting the SIM card:
1. Insert the tip of the SIM removal tool into the small hole next to
the
SIM card tray slot. Push the tip all the way into the hole until the
SIM card tray ejects.
2. Pull the SIM card tray out slightly with your fingers.
3. Place the SIM card or Micro SD card (refer to identification on the
tray) into the tray and push the tray back into slot.
12
Front Camera
Notification LED
Volume
Light/Proximity Sensor
Receiver
POWER/LOCK
Dual Camera
8. Flashlight
9. Fingerprint
10. Headset Jack
11. Main Microphone
12. Type C interface
13. Secondary Microphone
14. Speaker
Button
Function
Fingerprint
Unlock screen
Volume
Adjust volume of call, ringtone, music and video.
C to 40°C. Remove the charger or data cable after fully charged,
Short press the button under the normal status of
as this will prolong the battery’s life. Only use the original charger
supplied to charge the mobile phone.
·The mobile phone may become hot during charging or prolonged
POWER/LOCK
bright screen to turn off the phone backlight; wake
up phone by short press under sleep mode and
long press more than 10 seconds to force restart.
use, which is normal and will not affect the service life or
performance of the device. If the mobile phone is overheating, stop
using immediately.
Personal Medical Device
·Mobile phones may affect the use of pacemakers, hearing aids,
cochlear or other implants.
EU regulatory conformance
Body worn operation
Nano SIM1
TF/Nano SIM2
Turn on: hold in the POWER button until the phone powers on.
Settings: configure display, sound, vibration and other common
Turn off: hold in the POWER button until the phone displays ‘slide
features.
to turn off’- follow prompts.
WLAN (Wi-Fi): access the Internet through WLAN. Enable WLAN to
Contacts: easily manage your communications with contacts via
automatically scan and select a network to connect to; enter
Dimension
152.9*74.2*8.5mm
phone, messaging, and email.
network password if required, then tap to connect.
Design
Straight Panel PDA
Tips: turn off WLAN when not in use to conserve battery power; if you have
Antenna
Built-in
SIM Card
Standard Nano SIM Card
Messages: send and receive short text messages (SMS) and
multimedia messages (MMS).
a previously accessed secured WLAN.
Receiving Calls: slide up to answer the incoming calls.
Bluetooth: a short-range wireless communication technology, that
Call Services: includes call forwarding, call waiting and more.
allows devices to exchange information over short distances. If there
are obstructions between devices, the effective distance may need to
be reduced. Enable Bluetooth to automatically scan and select a
Browser: accessing the Internet can allow you to enjoy a high-speed
device to pair; tap ‘PAIR’ to establish the secured connection with
Internet surfing experience, whenever and wherever.
this device if needed.
Note: for Internet access features, please confirm what is supported
Tips: set your visibility and choose if you are able to be detected by nearby
by your network service provider and if the service is active; refer to
your network service provider for details.
Sound and Vibration: set notification sounds and some operational
The mobile phone supports dual-card blind insertion, and the default
Clock: set alarms, reminders, repeat cycles and more.
feedback.
card 1 is the main card, and the main and auxiliary card can be
Calendar: create events, query dates and manage your calendar.
Display: configure brightness, display sleep time and more.
switched
Gallery: manage and view photos.
Storage: check storage capacity and available space.
through
the
system
settings.
Main
card
supports
TD-LTE/LTE FDD/TD-SCDMA/WCDMA/GSM network. When using
Camera: capture photos and videos.
the GlocalMe Connect service, it is recommended to insert only one
Audio Recorder: record, play back and delete.
SIM card; if you insert two SIM cards, one SIM card will not be
System Update: update your system through data connection and
available when the GlocalMe connection is enabled. Please carefully
WLAN (Wi-Fi).
TD-LTE/LTE FDD/WCDMA/
the highest SAR value for this device complies with this limit.
GSM
Statement
Rear Dual Camera 8MPPixels AF+2MP Pixels,
Hereby, HONGKONG UCLOUDLINK NETWORK TECHNOLOGY LIMITED declares
Front Camera 5MP Pixels
that this device is in compliance with the essential requirements and other relevant
provisions of Directive (RED) 2014/53/EU
Supported
Headset Jack
American Standard Jack
FCC Statement
FCC Compliance(When US bands are supported)
The Maximum Specific Absorption Rate (SAR) of
established by the Federal Communications Commission (USA).
electromagnetic radiation is 2.0W/kg
The SAR limit adopted by the USA is 1.6 W/kg averaged over one gram of tissue.
The highest SAR value reported to the FCC for this device type complies with this
limit.
Display Parameter
This device complies with part 15 of the FCC Rules. Operation is subject to the
Dimension
following two conditions: (1) this device may not cause harmful interference, (2) this
Resolution
device must accept any interference received, including interference that may cause
IPS
5.7 Inches
1440*720 Pixels
undesired operation.
User that changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
view and control the current active services.
1. Your phone will use mobile data during system updates. Please consult your
sync accounts.
Factory Reset: return your phone to its original state by following the
2. System update may take a while; do not turn off the phone during system update.
prompts. It permanently erases all personal data on your phone.
3. System update will not affect the data on your phone.
Document Management: manage and edit documents.
4. System update will improve user experience and it is recommended to use the
Tools: calculator, compass and more are supported.
‘Smart Update’ feature.
TEL: +852 8191-2660
device is designed to use the minimum power required to reach the network.
The SAR limit adopted by Europe is 2.0 W/kg averaged over 10 grams of tissue, and
Body-worn Operation
accordance with notification.
Address: 29/F, One Pacific Centre, 414 Kwun Tong Road, Kwun Tong, KLN
actual SAR level during operation can be well below the value. This is because the
This device was tested for typical body-worn operations. To comply with RF exposure
Account Management: change the auto sync settings and manage
HONGKONG UCLOUDLINK NETWORK TECHNOLOGY LIMITED
determined at the highest certified power level in laboratory conditions, but the
and built-in applications take up some storage space.
Tips:
Product Model: ELTP18A04
radio frequency energy absorbed by the body when using a device. The SAR value is
Tips: the available space is less than the nominal, because the operating system
electricity or water immersion. SIM card shall be inserted in
network provider for specific data rates.
The Specific Absorption Rate (SAR) is the unit of measurement for the amount of
Micro SD Card
Type
Application Management: manage and delete installed applications,
keep your SIM card, and do not bend, scratch, and expose to static
Certification information (SAR)
This device is also designed to meet the requirements for exposure to radio waves
More: set the VPN and WLAN display in WLAN and Network features.
Email: configure email accounts and easily send and receive emails.
Built-in Camera
SAR Value
Bluetooth devices.
phone, and two Nano SIM cards can be inserted in each card slot.
Basic Specification
Network
Rejecting Calls: slide down to reject the incoming calls.
Note: please consult the network operator for details.
Note: this mobile phone is a dual-card and dual-standby mobile
your body. Keep the device away from your body to meet the distance requirement.
network coverage and have WLAN enabled, the phone will automatically connect to
Dial Pad: input phone numbers on the dial pad to make calls.
wechat
The device complies with RF specifications when used at a distance of 5 mm from
Technical Specification
Accessories
Quantity No.
No.
Item
Mobile Phone
Travel Charger
USB Charging Cable
User Manual
Item
SIM Removal Tool
Quantity
requirements, a minimum separation distance of 10mm for body worn must be
maintained between the user’s body and the handset, including the antenna. Third-party
belt-clips, earphone, and similar accessories used by this device should not contain any
metallic components. Body-worn accessories that do not meet these requirements may
not comply with RF exposure requirements and should be avoided. Use only the
supplied or an approved antenna.
Note: the items included in the accessories list are subject to final sales. Please
consult the dealer for details
Email: service@ucloudlink.com
Web: http://www.glocalme.com
10
Canada, Industry Canada (IC) Notices
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR dʼInnovation, Sciences et Développement
économique Canada applicables aux appareils radio exempts de licence. Lʼexploitation
est autorisée aux deux conditions suivantes : (1) lʼappareil ne doit pas produire de
brouillage, et (2) lʼutilisateur de lʼappareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible dʼen compromettre le fonctionnement.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure
requirements, a minimum separation distance of 10mm for body worn must be
maintained between the user’s body and the handset, including the antenna. Third-party
belt-clips, earphone, and similar accessories used by this device should not contain any
metallic components. Body-worn accessories that do not meet these requirements may
not comply with RF exposure requirements and should be avoided. Use only the
supplied or an approved antenna.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2018:08:15 17:19:28+09:00
Creator                         : Adobe Illustrator CC 22.0 (Windows)
Modify Date                     : 2018:08:29 11:07:56+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Title                           : P3说明书_英文版
Metadata Date                   : 2018:08:29 11:07:56+08:00
Creator Tool                    : Adobe Illustrator CC 22.0 (Windows)
Thumbnail Width                 : 256
Thumbnail Height                : 172
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 18093 bytes, use -b option to extract)
Instance ID                     : uuid:ef2a1c4f-4cee-4db9-a0bb-37a24a5861d3
Document ID                     : xmp.did:f9f6dfd7-e252-9348-a47f-6ed1197b509e
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:959160db-0a83-4c93-8a61-70d711ccda98
Derived From Document ID        : xmp.did:61afbc5a-8455-ef48-a134-054c12c129bc
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:7b45fe99-8fd6-406f-9c54-307a1d4fadb1, xmp.iid:f9f6dfd7-e252-9348-a47f-6ed1197b509e
History When                    : 2017:11:15 11:04:46+08:00, 2018:08:15 17:19:23+08:00
History Software Agent          : Adobe Illustrator CC 2017 (Macintosh), Adobe Illustrator CC 22.0 (Windows)
History Changed                 : /, /
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 480.000028
Max Page Size H                 : 316.000694
Max Page Size Unit              : Millimeters
Font Name                       : PingFang-SC-Light, ArialUnicodeMS, PingFang-SC-Medium, MyriadHebrew-Regular, PingFang-SC-Regular, PingFang-SC-Bold
Font Family                     : 苹方, Arial Unicode MS, 苹方, Myriad עברית, 苹方, 苹方
Font Face                       : 细体, Regular, 中等, Regular, 常规, 粗体
Font Type                       : TrueType, TrueType, TrueType, Open Type, TrueType, TrueType
Font Version                    : 10.11d9e1, Version 0.85, 10.11d9e1, Version 1.040;PS 3.000;hotconv 1.0.69;makeotf.lib2.5.35818, 10.11d9e1, 10.11d9e1
Font Composite                  : False, False, False, False, False, False
Font File Name                  : PingFang Light.ttf, arial unicode ms.ttf, PingFang Medium.ttf, MyriadHebrew-Regular.otf, PingFang Regular.ttf, PingFang Bold.ttf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Group Name               : 默认色板组, 灰色, 明亮
Swatch Group Type               : 0, 1, 1
Swatch Colorant Swatch Name     : 白色, 黑色, CMYK 红, CMYK 黄, CMYK 绿, CMYK 青, CMYK 蓝, CMYK 洋红, C=15 M=100 Y=90 K=10, C=0 M=90 Y=85 K=0, C=0 M=80 Y=95 K=0, C=0 M=50 Y=100 K=0, C=0 M=35 Y=85 K=0, C=5 M=0 Y=90 K=0, C=20 M=0 Y=100 K=0, C=50 M=0 Y=100 K=0, C=75 M=0 Y=100 K=0, C=85 M=10 Y=100 K=10, C=90 M=30 Y=95 K=30, C=75 M=0 Y=75 K=0, C=80 M=10 Y=45 K=0, C=70 M=15 Y=0 K=0, C=85 M=50 Y=0 K=0, C=100 M=95 Y=5 K=0, C=100 M=100 Y=25 K=25, C=75 M=100 Y=0 K=0, C=50 M=100 Y=0 K=0, C=35 M=100 Y=35 K=10, C=10 M=100 Y=50 K=0, C=0 M=95 Y=20 K=0, C=25 M=25 Y=40 K=0, C=40 M=45 Y=50 K=5, C=50 M=50 Y=60 K=25, C=55 M=60 Y=65 K=40, C=25 M=40 Y=65 K=0, C=30 M=50 Y=75 K=10, C=35 M=60 Y=80 K=25, C=40 M=65 Y=90 K=35, C=40 M=70 Y=100 K=50, C=50 M=70 Y=80 K=70, AutoCAD Color, AutoCAD Color 2, AutoCAD Color 3, AutoCAD Color 4, C=0 M=0 Y=0 K=100, C=0 M=0 Y=0 K=90, C=0 M=0 Y=0 K=80, C=0 M=0 Y=0 K=70, C=0 M=0 Y=0 K=60, C=0 M=0 Y=0 K=50, C=0 M=0 Y=0 K=40, C=0 M=0 Y=0 K=30, C=0 M=0 Y=0 K=20, C=0 M=0 Y=0 K=10, C=0 M=0 Y=0 K=5, C=0 M=100 Y=100 K=0, C=0 M=75 Y=100 K=0, C=0 M=10 Y=95 K=0, C=85 M=10 Y=100 K=0, C=100 M=90 Y=0 K=0, C=60 M=90 Y=0 K=0
Swatch Colorant Mode            : CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK
Swatch Colorant Type            : PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS
Swatch Colorant Cyan            : 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 15.000000, 0.000000, 0.000000, 0.000000, 0.000000, 5.000000, 20.000000, 50.000000, 75.000000, 85.000000, 90.000000, 75.000000, 80.000000, 70.000000, 85.000000, 100.000000, 100.000000, 75.000000, 50.000000, 35.000000, 10.000000, 0.000000, 25.000000, 40.000000, 50.000000, 55.000000, 25.000000, 30.000000, 35.000000, 40.000000, 40.000000, 50.000000, 92.941171, 37.152666, 92.941171, 92.941171, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 85.000000, 100.000000, 60.000000
Swatch Colorant Magenta         : 0.000000, 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 90.000000, 80.000000, 50.000000, 35.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000000, 30.000000, 0.000000, 10.000000, 15.000000, 50.000000, 95.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 95.000000, 25.000000, 45.000000, 50.000000, 60.000000, 40.000000, 50.000000, 60.000000, 65.000000, 70.000000, 70.000000, 87.924010, 76.470584, 87.924010, 87.924010, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 75.000000, 10.000000, 10.000000, 90.000000, 90.000000
Swatch Colorant Yellow          : 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 0.000000, 0.000000, 90.000000, 85.000000, 95.000000, 100.000000, 85.000000, 90.000000, 100.000000, 100.000000, 100.000000, 100.000000, 95.000000, 75.000000, 45.000000, 0.000000, 0.000000, 5.000000, 25.000000, 0.000000, 0.000000, 35.000000, 50.000000, 20.000000, 40.000000, 50.000000, 60.000000, 65.000000, 65.000000, 75.000000, 80.000000, 90.000000, 100.000000, 80.000000, 89.019603, 0.000000, 89.019603, 89.019603, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 95.000000, 100.000000, 0.000000, 0.003100
Swatch Colorant Black           : 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000000, 30.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 25.000000, 0.000000, 0.000000, 10.000000, 0.000000, 0.000000, 0.000000, 5.000000, 25.000000, 40.000000, 0.000000, 10.000000, 25.000000, 35.000000, 50.000000, 70.000000, 79.998469, 0.000000, 79.998469, 79.998469, 100.000000, 89.999400, 79.998800, 69.999700, 59.999100, 50.000000, 39.999400, 29.998800, 19.999700, 9.999100, 4.998800, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.003100
Swatch Colorant Tint            : 100.000000, 100.000000, 100.000000, 100.000000
Producer                        : Adobe PDF library 15.00
Page Count                      : 2
AI Creator Version              : 22.0.0
For                             : л,
Bounding Box                    : -1 -896 1361 1
AI Build Number                 : 243
AI Color Usage                  : Color
AI Ruler Units                  : Millimeters
AI Color Model                  : CMYK
AI Target Resolution            : 800
AI Num Layers                   : 1
Container Version               : 11
Creator Version                 : 22
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AC88-ELTP18A04

Navigation menu