UCLOUDLINK NETWORK TECHNOLOGY G1S 3G Free Roaming Hotspot User Manual C8ABD2B3D5D5C6AC

Download:
Mirror Download [FCC.gov]
Document ID	2682162
Application ID	4Q/GbhReI8sf0LTwcU6JeQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	236.14kB (2951774 bits)
Date Submitted	2015-07-16 00:00:00
Date Available	2015-07-16 00:00:00
Creation Date	2017-09-24 01:31:17
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-09-24 01:31:17
Document Title
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

G18 Quick Start
HongKong uCIoudIink Network Technology Ltd.
1.Product Structure Diagram
G‘IS is a Wi-Fi hotspot without SIM card, and providing
you with a global mobile Internet service
with roaming free.
4 l
5 C' -)
1.|ndicator
2.Disp|ay
3.Right page
4.Power on/off
Press and hold for three seconds
for turnon
Press and hold for five seconds
for shutdown
5.Left page button
Status of indicator
Red | Charging
Green I Charge completed
Power bank
Blue
Flashing green I Device Upgrading
1.Product Structure Diagram
6.USB Port (output):
Double press the “on/off“ button to charge other
devices( indicator light turns blue)as power bank.
7.Micro USB(input):
1A input is recommended
Note:
1. Keep away from water.
2. Ensure adequate heat dissipation.
3. Internet connection may not be possible in a few areas
due to poor network coverage of local mobile operators.
2.0peration Process
®Gloca|Me account registration
Register accounts through GlocalMe App or website
www.g|oca|me.com
Scan to download App forAndroid & iOS
You can download the GlocalMe App by scanning the QR
code on the screen of 615 or by logging in at from website,
www.g|oca|me.com.
The GlocalMe App can be used for account registration,
top-up, package purchase, rates view, and data traffic
history, etc.
2.0peration Process
®Account top-up
We accept Paypal,Visa/ Master card(through PayPal),
Ali pay, etc. for refill payments.
@Device activation
iMEi —-
PiN'
Note 61 users Dieasc mm the FWD instead oiPIN
Turn right with onepages for this
after boot
Enterthe IMEI number and ,, . q, .,
PIN of your G18 on the App :égxilxiiilxi K“
device activation interface, """""""
or use the GlocalMe App to
scanthe QR code on the ID:abc@ucloud. com
G18 screen. I
Turn right with two pages for this
after boot
2.0peration Process
@ Connect to the Internet
1.Press and hold the “on/of " button for three seconds and wait
for the G1 3 to boot.
2.A green and non-flashing GlocalMe icon on the upper left
corner ofthe screen indicates that the device is connected to
the Internet. Ifyou have purchased data plans, the data plan
usage condition could be seen as shown below.
Q; 1“: 35 .ulll El'
Package remain:
1024MB
28/30Days
Data package interface
3.Search and connect to the GlocaIMe Wi—Fi on
your mobile device
GIocalMe_**** a. ’% ®
The Wi-Fi password is shown on the G18 information
display page.
Wl—Fl : XXXXXXXXXX
PWD :XXXXXXXXXX
3.Status bar
‘3‘; SE ..III E]-
USA:0.05€/MB
(Without data package interface)
1.lnternet service status indicator:
Green non-flashing connected to the Internet. Green flashing
searching network.
2.Wi-Fi signal indicator/ number of connected devices.
3.Current accessed network mode.
4.Network signal strength indicator.
5.Battery indicator.
6.Account balance.
7.Current country and the rate in the country.
4.Product introduction
BrandelocalMe
Model: 615
Technical parameters:
HSUPA/HSDPA/UMTS:2100/1900/900/850 MHz
GPRS/EDGE/GSM:1900/1800/900/850 MHz
HSUPA max uplink speed: 5.76 Mbps
HSDPA max downlink speed: 7.2 Mbps
Wi-Fi 802.11b/g/n: 150 Mbps
Screen size: 1.77 inches
Standard USB 2.0 Interface
Standard micro USB Interface
Battery Capacity: 6000mAh
Input/output: DC 5V-1A
5.FAQ
1.How|ong does ittake to chargeG1S?
Around nine hours.
2.How|ong will G18 battery last?
Aboutten hours .
3.How do I change the Wi-Fi network name and password?
You can connect to the Wi-Fi through a mobile phone or
computer, and input 192.168.1691 into the browser. Both
the account and password are “admin”, and you can log
in and change the passcode.
4.How to start the power bank functionality?
Double press the “on/off" button and the indicator will turn blue.
5.What ifl lose the device?
You should log in your accountto deactivate the device in order
to protect any money and data in the account.
Stepszlog in ——- my device—- delete device.
6.How many devices can be connected simultaneously to the
G18?
Five.
7.How to check the data usage?
You can use the GlocalMeApp or log in at www.glocalme.com
8.How long does it take the G1 8 to connect to a network after
booting up?
It usually takes one to two minutes, or at most ten minutes if it
has been started up for the first time in a country.
9.Why cannot G1 8 be booted while there is still power?
The battery is probably too low and needs to be charged
immediately.
For more information, please log on www.g|oca|me.com
6.Warning
Specific Absorption Rate (SAR) information.
SAR tests are conducted using standard operating positions
accepted by the FCC with the device transmitting at its highest
certified power level in all tested frequency bands, although the
SAR is determined at the highest certified power level, the actual
SAR level ofthe device while operating can be well below the
maximum value, in general, the closer you are to a wireless base
station antenna, the lower the power output.
Before a new device can be made available for sale to the
public, it must be tested and certified by the FCC that it does not
exceed the exposure limit established by the FCC, Tests for each
device are performed in positions and locations as required by
the FCC.For body worn operation, this device has been tested
and meets the FCC RF exposure guidelines when used with an
accessory designated for this product or when used with an
accessory that contains no metal and that positions the device a
minimum of 1.0 cm from the body.
This device complies with part 15 ofthe FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
6.Warning
undesired operation.Any Changes or modifications not expressly
approved by the party responsible for compliance could void the
user‘s authority to operate the equipment.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 ofthe
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
"Reorient or relocate the receiving antenna.
--|ncrease the separation between the equipment and receiver.
--Connect the equipment to an outlet on a different circuit to the
receiver.
--Consult the dealer or an experienced radio/TV technician for
help.
@ GIocaIMe
Contact Information:
Website: www.g|oca|me.com
Phone Number: +852 8191 2660 or +86 400 822 1581
E-mail: support@uC|oud|ink.com
Facebook: GIocaIMe
Twitter: @GIocalMeOnIine
WeChat: GIocaIMe
Address:Unit D.16F,Chenknang plaza 250 Hennessy
Road,wanchai HongKong

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : Administrator
Create Date                     : 2015:07:13 14:54:56+08:00
Modify Date                     : 2015:07:16 16:54:10-07:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Metadata Date                   : 2015:07:16 16:54:10-07:00
Format                          : application/pdf
Title                           : 
Creator                         : Administrator
Document ID                     : uuid:1f33975b-ab6e-4168-a7aa-dcf90be0cb16
Instance ID                     : uuid:ce54b194-3494-4b36-ae79-58800fd0bcff
Page Count                      : 12

EXIF Metadata provided by EXIF.tools