UNEEDS Commerce UM-1100C Bluetooth Mono Headset User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1115308
Application ID	vFcQbos2sRkdbFtNP84BOw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	22.73kB (284146 bits)
Date Submitted	2009-05-26 00:00:00
Date Available	2009-11-21 00:00:00
Creation Date	2009-05-25 22:16:19
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2009-05-25 22:16:19
Document Title	Microsoft Word - UM-1100c_manual_영문_최종본.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

UM-1100C User Guide
1.
What is Bluetooth?
Bluetooth is started new concept of multi‐communicator link since 1994 by Ericsson. February 1998, Bluetooth
SIG (Special Interest Group) composed of Erisson, Nokia, IBM, Toshiba and Intel which were beginning.
Currently, it is defined on the global local wireless communication standard. Bluetooth technology has been
establishing on the industry standard of local wireless interface for “Innovation of the wireless communication”
and “Wireless world”.
2.
Introduction of UM‐1100C
UM‐1100C is wireless headset product which satisfied with Bluetooth standard qualification (SIG).
This is able
to enjoy wireless high quality stereo digital music connected with PC (support Bluetooth), PDA, mobile phone,
and PMP which come right telephone calling and music listening (Mono ways) by wireless freedom.
3. Components and product specification
① Power Switch / Telephone call
② Volume up / Volume down
③ Recharge cable connection part
④ USB recharge cable
UM-1100C
∙ How to recharge
‐
Blue lamp lighting on when charger plug is connected
‐
When complete charging, Blue lamp lighting off
‐
Average charging hour is about 2 hours
‐
During charging: Blue Lamp on, Complete charging: Blue Lamp off
∙ Power Switch / Telephone call
‐ When push power switch button continuously about 5 seconds, power switch is on with “Beep” sound
‐ During operating, blue colored lamp is flickering each 2 seconds
※ Caution
After purchasing product, it needs to step of pairing when first operation doing. Pairing is registration
procedure between headset and Bluetooth support mobile or Bluetooth devices. This step must do by yourself.
After that, you can listen to music and telephone calling normally. It also works like exterminates interruption
and set up the security as well.
Pairing is performed once the first registration after purchasing product. After first pairing, you don’t need to
do pairing again.
※ Take out of goods from warehouse, this Bluetooth UM‐1100C is not completely charged. It is only about 30%
of battery capacity being charged. After purchase, you should recharge our Bluetooth being fully charged.
4. Pair Bluetooth Headset
∙ Pairing
‐ When push power Switch/Telephone Calling button about 3 second firmly, power lamp will be on with “Beep”
sound.
‐ This time you must not release the button keep push firmly. Then “Blue” lamp is completely will be on. After
that, you should released button. (Ready to pairing with your Bluetooth Devices)
‐ Find “Device List” in your mobile or PC
‐ Search for “Bluetooth Devices” Æ If required, press “Yes” to activate Bluetooth then press “New”
‐ After a moment the display shows a list of Bluetooth devices within range.
Please Note) Bluetooth needs to be activated on the headset.
There should be no more than 10 Meters (32 Feet) between the devices.
It is not necessary to have clear space between them.
‐ Key in the access code (ALL UNEEDS PRODUCTS ARE 4 ZEROS) and press “OK”
‐ The headset is paired with the Mobile phone or PC
‐ You can hear the incoming call alert in the headset and use it to answer calls
∙ Disconnect
‐ Press “Disconnect” to return to stand‐by mode
5. Start “UM‐1100C”
A. Telephone Calling
‐ “ UM‐1100C “ is support to voice telecommunication in your mobile phone or PC
‐ When incoming call alert in your mobile phone, you can hear the incoming bell sound through headset.
‐ This time, you just press Power Switch / Telephone Calling button softly; you can use it to answer calls.
‐ When you press power Switch / Telephone calling button shortly, you can make a call which is last call made.
(According to type of mobile phone there is a possibility which there will be a difference)
‐ Press directory numbers or select when press button shortly, you can make a call easily.
‐During mobile phone calling, press Power Switch / Telephone Calling shortly then there is a possibility calling
at headset.
‐ You will be able to control volume with Vol‐/Vol+ button
B. Functions of Power Switch / Telephone Calling Button
1. Make a call
Input dialed numbers then press Power Switch / Telephone Calling button shortly.
2. Make a call with last telephone number
When you press Power Switch / Telephone Calling button of headset shortly, latest telephone numbers are
listed on your mobile phone. You just choice telephone number on your mobile phone then press Power Switch
/ Telephone Calling button.
3. Using Voice Recognition Function
When press Power Switch / Telephone Calling button make longer (About 3 seconds) then release the button,
voice recognition function will be activated. (This function is only activated by voice recognition function
supporting mobile phone)
4. Receive Incoming Telephone
When incoming telephone calling, you can hear melody through headset. This time, press Power Switch /
Telephone Calling button then it will be connected. Press Power Switch / Telephone Calling button shortly twice
continually, it will be refused.
5. Convert Telephone Calling
During telephone calling with Mobile Phone, wish to convert telephone calling to headset, press Power Switch
/ Telephone Calling button shortly once. During telephone calling with Headset, wish to convert telephone
calling to Mobile Phone, press Power Switch / Telephone Calling button shortly twice.
6. Ring off Telephone Calling
During telephone calling, press Power Switch / Telephone Calling button shortly.
7. Silent Function
This function is only you are able to hear counterpart voice but your voice can not hear by counterpart. While
silent function activated, let you know this function being activated with “Beep” sound in 5 second interval.
When you press Vol‐ / Vol+ button make longer (About 3 second), it converts to silent function with “Beep”
sound. When you press Vol‐ / Vol+ button shortly, it will be cancelled.
6. Troubleshooting / Frequently Asked Question
⊙ In case of “cannot hear any sound from the headset”
‐ Confirm connected with registered device
‐ Check power switched off of headset or dongle
‐ Confirm headset being registered
⊙ The case where the use time of the battery comes to be short
‐Battery is the expendable. After purchasing, using time to be shorter is a qualitative possibility little by little.
‐ Battery Is included in this product. there is a possibility the damage happening in high temperature, high
humidity and low temperature.
⊙ In case of howling during telephone calling
‐There is a possibility the howling from the space where is confined narrowly such as toilet or stairway etc.
According to telephone calling volume there is a possibility the howling. Try to control volume high and low.
⊙ In case of noise sound is audible or breaks telephone calling during calling
‐Put Mobile phone or dongle in a bag, desk drawer inside or grip with your hands, this status will be occurred
with receiving state of electric wave ragged time.
‐ Currently the electronic condition of the area can be unstable and is a problem.
⊙ How long does radio communication distance of mobile phone and headset?
‐ The radio communication distance generally until the maximum 10 meters.
⊙ When the charging lamp does not light on,
‐This is not product failure. When being a condition where the condition of the battery is fully charged, if
inserts the plug and the charging ramp lights and support there is a possibility without of being. Also, perhaps,
it will be able to occur when the combination condition of charging jack is bad. Please take out the plug then
insert it again.
⊙ Size of Volume / Noise
There is a possibility some ambient noise being audible to the calling at the time of counterpart while
talking on the field, construction site or road. Volume must be adjusted less volume size except on loud
areas. Long time under transforming there is a possibility of bringing a damage in hearing acuity in big
sound. Especially, be aware of long time music listening by mono sound.
⊙ Using Headset during recharge
‐ You cannot use headset during it recharged.
Other inquiry will visit our website www.u‐needs.co.kr
You can inquiry through our website.
7. Attention fact for your safety
⊙ DIRECTION
1.
Product which puts on near fire, this will be damaged or exploded therefore you won’t put this on
near fire.
2.
Drop or strong shock into the product, the product will be damaged or to be shorten lifetime.
3.
Do not separate or repair to the product, you should contact to purchasing stores or A/S center
directly.
4.
When the product is inundated or wet in the water, you should power off the product then contact to
purchasing stores or A/S center directly.
5.
Do not use any chemical products to clean the headset.
6.
Must use right adapter which is provided by manufacturer or authorized product.
7.
Please store the headset to dry and room temperature place while do not use for a longtime.
8.
Inquiry about compatible matters to contact customer service.
9.
Do not use the headset for a longtime with high volume. It may caused lose your hearing.
⊙ Exemption Clause
1.
Manufacturer, Distributors and Agents are not responsible for any damage from accidentally which
caused by customers mistake.
2.
This user manual is made out from present product specification.
3.
Product specification and direction of use will be replaced without notice in advance for the efficiency
improvement of the product.
UNEEDS COMMERCE
Digital Empire II, 486, Shin Dong, Yongtong Gu, Suwon, Gyeonggi Do, Korea
TEL: +82 31 695 7760
E‐mail : bluetooth@u‐needs.co.kr
Homepage : http://www.u‐needs.co.kr
Specification
UM-1100C
Configuration
Bluetooth Mono Headset
Bluetooth Version
Bluetooth Ver 2.0 (EDR disabled)
Bluetooth Profile
Headset / Hands-free / Hands-free1.5
Range
Maximum 10m ( Class 2 )
Continuous Calling
Maximum 4 Hours
Continuous Standby
Maximum 70 Hours
Weight
10g
Battery
Li-ion Polymer
Output Power
2.55 dBm
Receive Sensitivity
-83dBm
Frequency
2402MHz ~ 2480MHz
Output Voltage
DC3.7V
Operating Temperature
-10 ~ +60℃
FCC (Federal Communications Commission)
WARNING:
This equipment may generate or use radio frequency energy. Changes or modifications to this
equipment may cause harmful interference unless the modifications are expressly approved in the instruction
manual.
The user could lose the authority to operate this equipment if an unauthorized change or
modification is made.
Information to User
This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio Frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
▪ Reorient or relocate the receiving antenna.
▪ Increase the separation between the equipment and receiver
▪ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
This device complies with Part 15 of the FCC`s Rules. Operation is subject to the following two Conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesirable
operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2009:05:25 22:16:19+09:00
Create Date                     : 2009:05:25 22:16:19+09:00
Format                          : application/pdf
Title                           : Microsoft Word - UM-1100c_manual_영문_최종본.doc
Creator                         : Administrator
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Document ID                     : uuid:3c4dfdfc-518e-42ce-a436-6a4edacb7321
Instance ID                     : uuid:517d4ca8-4d11-4fd4-8076-8a041bc4082c
Page Count                      : 7
Author                          : Administrator

EXIF Metadata provided by EXIF.tools