UNION COMMUNITY AC-2000 Access controller User Manual VIRDI Safe 100 200 Manual
UNION COMMUNITY Access controller VIRDI Safe 100 200 Manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3263983 |
| Application ID | qCHgqJOHptvw1q5xuH9xhw== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 86.37kB (1079635 bits) |
| Date Submitted | 2017-01-18 00:00:00 |
| Date Available | 2017-07-17 00:00:00 |
| Creation Date | 2017-01-02 15:30:08 |
| Producing Software | Microsoft® Word 2010 |
| Document Lastmod | 2017-01-18 13:18:45 |
| Document Title | VIRDI Safe 100/200 Manual |
| Document Creator | Microsoft® Word 2010 |
| Document Author: | TaeKwon Shim |
AC-2000 .USER GUIDE Version Eng-1.00 Copyright 2000 By Union Community Co., LTD. 2 AC-2000 User GuideVersion Date Description Firmware Version 1.00 2016-12-06 -Initial Release 10.61.00-000.02 UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro, Songpa-gu, Seoul, 05836, Republic of Korea Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr AC-2000 User Guide Admin (Administrator) - The administrator can access to the terminal menu mode. He/she has the authority to add/modify/delete terminal users and to change the operating environment by changing settings. - If there is no registered administrator in the terminal, anybody can access to the terminal menu and change settings. It is recommended that more than one administrator will be necessarily registered in the terminal. - The administrator has the authority to change critical environmental settings of the fingerprint reader. So, special attention is required to its registration and operation. 1:1 Authentication (1 to 1 Verification) - The user fingerprint is verified after entering User ID or Card. - Only User ID or the user fingerprint registered to the card is compared. This is called 1:1 Authentication. 1:N Authentication (1 to N Identification) - The user is identified only by the fingerprint. - The same fingerprint as the input fingerprint is identified among the registered fingerprints without User ID or Card entered. This is called One-to-N Identification. Authentication Level - As a level used for fingerprint authentication, it is displayed in Step 1 to 9. Authentication cannot be allowed before the degree of match between two fingerprints is higher than the set authorization level. - The higher authentication level may ensure the higher security. But it requires the relatively high concordance rate. So it high likely to deny authentication when trying to authenticate. - 1:1 Level: Authentication level used for 1:1 authentication - 1:N Level: Authentication level used for 1:N authentication Authentication Method - This refers to various types of authentication methods composed of each combination of FP(Fingerprint) and RF(Card) and so forth. Ex) Card or FP: Authenticated by either card or fingerprint UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro, Songpa-gu, Seoul, 05836, Republic of Korea Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr 4 AC-2000 User Guide Table of Contents .................................................................................................... 2 ............................................................................................................. 3 Table of Contents.................................................................................................... 4 1. Before Getting Started ......................................................................................... 5 1.1. Safety Notes................................................................................................. 5 1.2. Product Details ............................................................................................ 6 1.3. LED signals displayed during operation ................................................... 6 1.4. Buzzer guide announced during operation ............................................... 7 1.5. How to register and enter correct fingerprint ........................................... 7 2. Product Description ............................................................................................. 9 2.1. Product Features ......................................................................................... 9 2.2. Configuration Diagram.............................................................................. 11 2.2.1. Standalone Use (Access) ................................................................... 11 2.2.2. Connecting the PC server (Access, T&A, Food Service Control) ....... 11 2.3. Product Specification................................................................................ 12 3. Environment Setting .......................................................................................... 13 3.1. Checkpoints before environment setting ................................................ 13 3.1.1. Run UNIS-B Plus (Mobile App)........................................................... 13 3.1.2. Add Terminal ....................................................................................... 14 3.1.3. Administrator Menu Entry ................................................................... 15 3.2. User Management ..................................................................................... 16 3.2.1. Add User............................................................................................. 16 3.2.2. Delete User ........................................................................................ 16 3.2.3. Modify User ........................................................................................ 17 3.3. Terminal Configuration ............................................................................. 18 3.3.1. Settings via UNIS-B Plus .................................................................... 18 3.3.2. Terminal IP settings via Terminal Finder ............................................. 20 4. How to use the terminal ..................................................................................... 23 4.1. Authentication ........................................................................................... 23 4.1.1. Fingerprint authentication ................................................................... 23 4.1.2. Card authentication ............................................................................ 23 4.1.3. Multi authentication ............................................................................ 23 5. Problem solution ................................................................................................ 24 5.1. When Fingerprint Authentication has failed or pended ......................... 24 5.2. When fingerprint input fails ...................................................................... 24 5.3. When the network connection fails ......................................................... 24 5.4. Successful Authentication but access denied ........................................ 24 UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro, Songpa-gu, Seoul, 05836, Republic of Korea Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr 5 AC-2000 User Guide 1. Before Getting Started 1.1. Safety Notes Warning Do not operate the terminal with wet hands, and pay attention not to let any Keep the terminal away liquid such as water enter from inflammables. inside the terminal. → Otherwise, it may → Otherwise, malfunction cause a fire. or electric shock may be caused. Do not disassemble, repair Do not allow children to or remodel the terminal at touch the terminal your disposal. carelessly. → Otherwise, it may cause → Otherwise, it may malfunction, electric shock, cause safety accidents of or a fire. children or malfunction. - Non-compliance of safety notes may cause death or serious injury for users. Cautions Do not install the terminal in a place exposed to direct sunlight. → Otherwise, it may cause malfunction, deformation and discoloration. Do not install the terminal in humid or dusty places. → Otherwise, it may cause malfunction. Do not clean this terminal by sprinkling water, nor wipe it with benzene, thinner, and alcohol. → Otherwise, it may cause electric shock or a fire. Keep the terminal away from magnets. → Otherwise, it may cause failure and malfunction. Keep the fingerprint input section clean. → Otherwise, the fingerprint cannot be recognized correctly. Do not spray insecticides or inflammables on the terminal. → Otherwise, it may cause deformation and discoloration. Keep the terminal away from shock or sharp objects. → Otherwise, it may damage the terminal and result in malfunction. Do not install the terminal in a place where there is a severe change in temperature. → Otherwise, it may cause malfunction. - Non-compliance of safety notes may cause personal injury or property damage for users. ※ We are not responsible for any accidents and damage that may arise from noncompliance of the information in this manual. UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro, Songpa-gu, Seoul, 05836, Republic of Korea Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr 6 AC-2000 User Guide 1.2. Product Details Status LED FP Sensor Card Input 1.3. LED signals displayed during operation Blue Power Green Door Blue On: Normal Flickering: Under Bluetooth communication Green On: Door Open Off: Door Close Off: Normal Flickering: Case Open or Pending register the Mobile Admin App ※ The LED may light on simultaneously in some cases. (Ex. Red and Blue flicker) Red Alarm Red UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro, Songpa-gu, Seoul, 05836, Republic of Korea Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr 7 AC-2000 User Guide 1.4. Buzzer guide announced during operation Ppik When button or card is operated - If the button is pressed or if the terminal reads the card - If your finger may be released because your fingerprint has been successfully entered Ppibik When failure If authentication fails or the user’s input is wrong When success If authentication is successful or if the current user finishes settings Ppiririk 1.5. How to register and enter correct fingerprint Correct fingerprint input method Enter your fingerprint as if you take a thumbprint by using your forefinger if possible. The fingerprint cannot be correctly registered and entered only by your fingertips. The center of the fingerprint should be touched with the fingerprint input section. Enter the fingerprint of your forefinger if possible. When using your forefinger, you can enter your fingerprint correctly and safely. Make sure that the fingerprint is unclear or wounded. Too dry, wet, blurry or wounded fingerprints are difficult to recognize. In this case, the fingerprint of another finger should be registered. UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro, Songpa-gu, Seoul, 05836, Republic of Korea Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr AC-2000 User Guide Precautions subject to your fingerprint status The availability of the fingerprint may vary depending on your fingerprint status. This product consists of a fingerprint recognition system and cannot recognize the damaged or unclear fingerprints. They should be registered using a password. If your hands are dry, you can blow your breath on the system to operate it more smoothly. For children, too small or unclear fingerprints may be difficult or impossible to use. They need to register a new fingerprint every six months. For seniors, the fingerprint with too many lines may not be registered. It is recommended that you will register more than two fingerprints if possible. In order to increase the fingerprint authentication rate, it is recommended to use six of the ten fingers as illustrated above. (Both thumbs, forefingers, middle fingers) UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro, Songpa-gu, Seoul, 05836, Republic of Korea Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr AC-2000 User Guide 2. Product Description 2.1. Product Features Access control system using the network (LAN) - The fingerprint reader communicates with the authentication server using a UTP cable and TCP/IP protocol. This terminal can be applied to the existing LAN network and has easy expandability. It ensures a fast speed by 10/100 Mbps Auto Detect and facilitates management and monitoring via the network. Convenient Auto Sensing function - The authentication function can be simply operated by entering the fingerprint without separate keys entered. Easy to verify your ID via fingerprint - The use of the fingerprint recognition technology (Biometrics) can prevent forgetting your password, losing your card or key, or avoid the risk of their theft. The use of personal fingerprints enhances the security of authentication. Diverse and flexible access control function - Easy to use it without the risk of rental, counterfeit and loss of your key or card. - Provide the complete access control function by granting access authority according to user groups. - Provide the flexibility of access control by allowing the access time restrictedly. - Economical maintenance and development costs compared to other access control devices. - Remove the inconvenience that visitors are registered in the management office and then separate cards are issued. Diverse utilization for operating systems such as security, access, T&A, and food service - Various operating methods can be supported depending on how the terminal menu is set. Large processing capacity of server - When the information is managed using the server, it can be processed almost infinitely. Mobile interlocking function - By using mobile Bluetooth, the terminal can be set to Admin App (UNIS-B Plus). - By using mobile Bluetooth, the user can be authenticated to User App (imkey). UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro, Songpa-gu, Seoul, 05836, Republic of Korea Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr 10 AC-2000 User Guide Various registration and authentication methods There are a total of four registration and authentication methods for general users. Before registering users or administrators, you should determine how to register and authenticate. FP Fingerprint Registration Fingerprint Authentication Card Card Registration Card Authentication M.Key Mobile Key Registration Mobile Key Authentication Card or FP Card or Fingerprint Registration Card or Fingerprint Authentication Card and FP Card and Fingerprint Registration Card Authentication and then Fingerprint Authentication UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro, Songpa-gu, Seoul, 05836, Republic of Korea Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr 11 AC-2000 User Guide 2.2. Configuration Diagram 2.2.1. Standalone Use (Access) DC12V Adapter (Lock+, Lock-, Monitor) Electrical Lock 2.2.2. Connecting the PC server (Access, T&A, Food Service Control) TCP/IP TCP/IP Internet / WAN / LAN TCP/IP TCP/IP TCP/IP TCP/IP UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro, Songpa-gu, Seoul, 05836, Republic of Korea Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr Fingerprint Authentication Server (Static IP) UDB Sever Database (MDB or MSSQL) Remote Administrator Program (User and Terminal Setting Management) Food Service Control Program Attendance Control Program 12 AC-2000 User Guide 2.3. Product Specification ITEM SPEC CPU 32Bit RISC CPU(400MHz) REMARK 64M DDR2 RAM MEMORY 32M NOR FLASH Fingerprint Sensor Optical Authentication Speed Less than 1 second Scan Area / Resolution 14.8 * 17.9mm / 500 DPI FRR / FAR 0.1% / 0.0001% TCP/IP Bluetooth Communication Port RS-485 Wiegand In/Out Temperature / Humidity -20 ~ 60 / Lower than 90% RH SIZE 58mm(W) * 191mm(H) * 62mm(D) 1,500 User 1,500 Finger 100,000 Log Authentication Server Communication Mobile Interlocking External Device Communication Card Reader or External Device Communication INPUT : Universal AC 100 ~ 250V AC / DC Adapter OUTPUT: DC 12V (Option : DC 24V) UL, CSA, CE Approved Card Reader Smart Card Reader UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro, Songpa-gu, Seoul, 05836, Republic of Korea Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr 14443A type, 128.9 kHz RF AC-2000 User Guide 13 3. Environment Setting 3.1. Checkpoints before environment setting 3.1.1. Run UNIS-B Plus (Mobile App) Visit the App store on your Smartphone and install the Mobile App ‘UNIS-B Plus’. And click on the UNIS-B Plus icon installed to run program. After initializing for more than 2 seconds, the intro menu screen will automatically be displayed. UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro, Songpa-gu, Seoul, 05836, Republic of Korea Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr 14 AC-2000 User Guide 3.1.2. Add Terminal When selecting [Add] in the upper right corner of [Terminal List], the Terminal Select screen will be displayed. Select the Terminal you want to register then go to the Terminal Search screen to find out the Terminal Registration Guide. When you opened the Temper Switch on the back of device, place your finger on the fingerprint input window and wait for about 5 seconds to operate and register the Terminal. UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro, Songpa-gu, Seoul, 05836, Republic of Korea Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr AC-2000 User Guide 15 3.1.3. Administrator Menu Entry When pressing the [View] button on the screen [Terminal List], and the following screen will appear to ask the User ID and Password. Even if there is no registered administrator in the terminal, user can access device without input ID and Password. If there is registered administrator in the terminal, user can access device by attempting authentication methods pre-defined. If there is any user ID input, the 1:1 authentication is performed, but 1:N authentication is performed if the user ID is not registered. After successful authentication, the screen will go to the User Management Menu. UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro, Songpa-gu, Seoul, 05836, Republic of Korea Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr 16 AC-2000 User Guide 3.2. User Management 3.2.1. Add User When pressing the [Add] button on the main screen [User Management], and the following screen will appear. Enter the user information to register on [Add User] screen. When you complete input the user information, select [Save] button in the upper right corner. If the user information is normally entered, the terminal will be ready for card or fingerprint input. When the set authentication method is completed, it returns to [User Management] screen. 3.2.2. Delete User When pressing the [Edit] button on the main screen [User Management], the following screen will appear. Select the ID of the user you want to delete from the registered users of the terminal and press [Delete] button or if you want to delete all the information registered, press [Delete All] button. (If the Mode is set to ‘Network’, the [Delete All] button will be deactivated.) UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro, Songpa-gu, Seoul, 05836, Republic of Korea Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr 17 AC-2000 User Guide 3.2.3. Modify User Select the user you want to modify on [User Management] screen, and the screen goes to the User Detail. After changing the user information except for ID, press [Save] button on the screen to save the changes, and also the screen may show the waiting status for the additional authentication when it is required. When the modification is completed, the screen returns to [User Management] screen. UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro, Songpa-gu, Seoul, 05836, Republic of Korea Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr AC-2000 User Guide 18 3.3. Terminal Configuration 3.3.1. Settings via UNIS-B Plus When pressing [Setting] button in the lower right corner of screen, the following screen will appear. To modify the existing Terminal setting, press [Edit] button in the upper-right corner of screen to enter the edit mode. When the modification of terminal setting is completed, press the [Save] button to save changed values and return to the main screen. ▶ Buzzer volume Set the buzzer sound volume of the terminal. ▶ Lock Controller 485 controllers can be selected. If you select MCP040, MCP040 will perform authentication, lock control, and log processing. ▶ Card Format If set to Hexa, hexadecimal is displayed. When set to Decimal, it is displayed in decimal. If you select [4. Format 5] with the installed RF (low frequency) card reader, the authenticity of the EM card is displayed in decimal notation. ▶ 1: N Level Set the verification level from 5 to 9 when 1: N authentication is in progress. ▶ 1: 1 Level Set the verification level from 1 to 9 when 1: N authentication is in progress. UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro, Songpa-gu, Seoul, 05836, Republic of Korea Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr AC-2000 User Guide 19 ▶ DHCP Use Set whether to use static IP. ▶ Terminal IP Set the terminal IP. ▶ Server IP Set the server IP when used in conjunction with a UNIS server. ▶ Subnet mask Set the subnet mask value of the terminal. ▶ Gateway Set the gateway value of the terminal. ▶ Port Number Set the port of the UNIS server. (Default: 9870) ▶ Firmware version The device's firmware version and BLE firmware version are displayed. ▶ Time synchronization Set the time of the terminal and the time of the cellphone to match. ▶ Initialize setting Initialize all data except logs and user information. ▶ Factory reset Reset the setting of the terminal. ※ After saving the setting, the terminal will be rebooted, so it is recommended to connect with 30 ~ 60 seconds interval. UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro, Songpa-gu, Seoul, 05836, Republic of Korea Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr AC-2000 User Guide 20 3.3.2. Terminal IP settings via Terminal Finder Before connecting AC2000 to UNIS server program, you may want to change it to another IP or other terminal ID. In this case, you need a separate program. The location is Program Files -> UNIS -> Patch folder and it is called Terminal Finder Program. With this program, you can search all the buddy devices in the same network and change the network settings (Terminal IP, Server IP, and Terminal ID etc.) 1) Add terminal ID of AC2000 from [Terminal Management] -> [Add Terminal] in UNIS and click [Add] button 2) Connect AC2000 to the network by using standard UTP cable. 3) Open the Terminal Finder program. 4) Click [Search] button - A list of all buddy devices on the network is displayed. UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro, Songpa-gu, Seoul, 05836, Republic of Korea Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr AC-2000 User Guide 21 5) Select the device to change the setting. It is highlighted and the current setting value is displayed. UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro, Songpa-gu, Seoul, 05836, Republic of Korea Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr AC-2000 User Guide 22 6) Modify the network value 7) To enhance security, you can change the password before clicking the [Apply] button. The default password is 0842650. This password can be changed. You can also use the lock option if you do not want to change the network settings again by the UDP search method. If Warning and lock options are set, it may not be possible to configure by using Terminal Finder program. 8) Click [Apply] button and ‘configuration settings success’ will be displayed at the bottom of the screen. UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro, Songpa-gu, Seoul, 05836, Republic of Korea Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr AC-2000 User Guide 23 4. How to use the terminal 4.1. Authentication 4.1.1. Fingerprint authentication When you place a fingerprint on the fingerprint sensor, the sensor lights up and the fingerprint is input. Do not remove your finger until the fingerprint sensor is completely turned off. 4.1.2. Card authentication Place the card on the card input of the terminal. 4.1.3. Multi authentication Authentication method for users who need to authenticate two or more authentication methods together, such as card & fingerprint authentication, proceeds with the remaining authentication if the entered authentication method is successful. UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro, Songpa-gu, Seoul, 05836, Republic of Korea Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr AC-2000 User Guide 24 5. Problem solution 5.1. When Fingerprint Authentication has failed or pended ▶ If the terminal operates 1: N (server) authentication in network mode and the server is used for business or personal use, the recognition rate and authentication time may take a long time due to the server load. Please build a private server. ▶ Check your fingers or sensor for scratches or foreign objects, and wipe them off any foreign objects. If the scar is large, re-register another fingerprint through the administrator. ▶ If the fingerprint status is not good, please lower the personal security level in the user information and try 1: 1 authentication. 5.2. When fingerprint input fails If the fingerprint is very dry or wet, it may not be input properly. If it is damp, wipe it with a dry towel. If it is dry, please blow your fingers or put oil on it and try again. 5.3. When the network connection fails ▶ Check whether the terminal is registered in the terminal management item in the information management menu of the UNIS program. ▶ In the case of unregistered terminal, check your device settings on Terminal Finder program. - Server IP with UNIS program installed. - Make sure if the device ID is set correctly. - If DHCP is not used, check the relevant information. 5.4. Successful Authentication but access denied Make sure if the time zone is not the time limit for access. UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro, Songpa-gu, Seoul, 05836, Republic of Korea Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr AC-2000 User Guide 25 FCC Information This device complies with part 15 of the FCC Results. Operation is subject to the following two conditions : (1) This Device may not cause harmful interface, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures: 1.1. Reorient or relocate the receiving antenna. 1.2. Increase the separation between the equipment and receiver. 1.3. Connect the equipment into an outlet on a circuit different from that to which receiver is connected. 1.4. Consult the dealer or experienced radio/TV technician for help. WARNING Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. “CAUTION : Exposure to Radio Frequency Radiation. Antenna shall be mounted in such a manner to minimize the potential for human contact during normal operation. The antenna should not be contacted during operation to avoid the possibility of exceeding the FCC radio frequency exposure limit. Contains FCC ID: 2AEEY-PBLN51822M UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro, Songpa-gu, Seoul, 05836, Republic of Korea Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Author : TaeKwon Shim Create Date : 2017:01:02 15:30:08+09:00 Modify Date : 2017:01:18 13:18:45+09:00 Language : ko-KR Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Creator : TaeKwon Shim Title : VIRDI Safe 100/200 Manual Creator Tool : Microsoft® Word 2010 Metadata Date : 2017:01:18 13:18:45+09:00 Producer : Microsoft® Word 2010 Document ID : uuid:bfafc1ec-d473-4250-86e4-b7320e02b27f Instance ID : uuid:67f224d9-9456-4d5c-a4dc-c325391b3b7b Page Count : 25EXIF Metadata provided by EXIF.tools