UNION COMMUNITY VS-R20SC THE PRODUCT IS GENERAL PURPOSE CARD READER USING RFID User Manual VS R20 User Guide

UNION COMMUNITY THE PRODUCT IS GENERAL PURPOSE CARD READER USING RFID VS R20 User Guide

USERS MANUAL

Copyright 2000 By Union Community Co., LTD. VS-R20(SC & RF). User Guide Version Eng-1.00
Smart-i 사용자 가이드 2 ㈜유니온커뮤니티 / 서울시 송파구 방이동 44-3 현대토픽스 빌딩 3층 (138-050) Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr <Revison History> Version Date Description Firmware Version1.00 2012-08-22 Initial Release 10.51.00-000.00 < Glossary > z Admin, Administrator - As a user who can enter into the terminal menu mode, he/she can register/modify/delete terminal users and change the operating environment by changing settings. - If there is no administrator for a terminal, anyone can change the settings, so it is recommended to register at least one administrator. - Caution is required with registration and operation because an administrator has the right to change critical environmental settings of the fingerprint recognition unit. z Authentication Method - RF (Card) Authentication z Function Keys - [F1], [F2], [F3], [F4] are the function keys, and they are used to enter menu or to change modes.
Smart-i 사용자 가이드 3 ㈜유니온커뮤니티 / 서울시 송파구 방이동 44-3 현대토픽스 빌딩 3층 (138-050) Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr Table of Contents <Revison History> ..................................................................................... 2 <Glossary> ........................................ 오류! 책갈피가 정의되어 있지 않습니다. 1. Before use ........................................................................................... 4 1.1. Safety Precautions ..................... 오류! 책갈피가 정의되어 있지 않습니다. 1.2. Terminal Description ......................................................................... 5 1.3. LED Signal during operation ................................................................ 5 1.4. Necessary Keys during operation ......................................................... 6 1.5. Voice Information during operation ....................................................... 6 1.6. Buzzer Sound during operation ............................................................ 6 2. Introduction .......................................................................................... 7 2.1. Features ........................................................................................ 7 2.2. Configuration .................................................................................. 8 2.3. Specifications ................................................................................. 9 3. Environment Settings ....................... 오류! 책갈피가 정의되어 있지 않습니다. 3.1. Check items before setting the environment오류! 책갈피가 정의되어 있지 않습니다. 3.1.1. Enterning menu ..................................................................... 10 3.2. Menu Configuration ........................................................................ 10 4. How to use the terminal ....................................................................... 10 4.1. Change authentication mode ............................................................. 10 4.2. Authentication ............................................................................... 11 4.2.1. Card authentication ................................................................ 11 4.3. Control Dip Switch ......................................................................... 11
Smart-i 사용자 가이드 4 ㈜유니온커뮤니티 / 서울시 송파구 방이동 44-3 현대토픽스 빌딩 3층 (138-050) Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr 1. Before use 1.1. Safety precautions z Warning Handling with wet hands or allowing liquid to flow into it is not advised. -> It may cause an electric shock or damage Do not place a fire source near the unit. -> It may cause a fire. Do not disassemble, repair, or modify the unit. -> It may cause an electric shock, fire or damage. Keep out of reach of children. -> It may cause an accident or damage. - If the above warnings are ignored, it may result in death or serious injury. z Cautions Keep away from direct sunlight Î It may cause deformation or color change. Avoid high humidity or dust ->The unit may be damaged. Avoid using water, benzene, thinner, or alcohol for cleaning -> It may cause an electric shock or fire. Do not place a magnet close to the unit. -> The unit may break down or malfunction. Keep the fingerprint area clean. Î It cannot read fingerprints correctly. Avoid using insecticides or flammable sprays near the unit. Î It may result in deformation or color change. Avoid impacts or using sharp objects on the unit. Î The unit may be damaged and broken. Avoid severe temperature changes Î The unit may be broken. -- If the above cautions are ignored, it may result in property loss or human injury. ※ Under no circumstances will Union Community be responsible for accidents or damages caused by inappropriate use of the product caused by not referring to the user manual.
Smart-i 사용자 가이드 5 ㈜유니온커뮤니티 / 서울시 송파구 방이동 44-3 현대토픽스 빌딩 3층 (138-050) Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr 1.2. Terminal Description 1.3. LED Signal during operation ● Abnormal Red ON: When authentication is failed ● Success Green ON: When authentication is successful State White Flickering: Waiting for a card to input ON: If is set as “LED is always ON” in terminal settings
Smart-i 사용자 가이드 6 ㈜유니온커뮤니티 / 서울시 송파구 방이동 44-3 현대토픽스 빌딩 3층 (138-050) Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr 1.4. Necessary Keys during operation [F1]~[F4] - They are used to change authentication mode [Hold F4 down] - Hold [F4] key down longer than 4 seconds - It is used to enter menu 1.5. Voice information during operation Action Voice information Authentication is successful You are authorized. Authentication is failed Please try again 1.6. Buzzer sound during operation “ppig” Pressing a key or a reading a card When a button is pressed or a card is being read When fingerprint input is completed, allowing the user to remove his fingerprint “ppibig” Failed Authentication failed or wrong user input “ppiiiick” Successful Authentication successful or settings for the current user are completed.
Smart-i 사용자 가이드 7 ㈜유니온커뮤니티 / 서울시 송파구 방이동 44-3 현대토픽스 빌딩 3층 (138-050) Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr 2. Introduction 2.1. Features z Quick and convenient authentication function - Simple and quick authentication with only using a card z Card authentication method provided - 125khz card and 13.56Mhz card supported per product z IP65 Outdoor Rating – Die Cast Casing : The terminal can be installed outdoor. z Understated Design - Simple and understated design with minimum interface reflected without LCD - Pursuit of convenience and luxury from simplicity z Convenient Auto Sensing function - Simple authentication process without any key input; simple fingerprint touching is sufficient. z Various and flexible access management provided - Perfect control function provided by giving the right of access per user group
Smart-i 사용자 가이드 8 ㈜유니온커뮤니티 / 서울시 송파구 방이동 44-3 현대토픽스 빌딩 3층 (138-050) Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr 2.2. Configuration
Smart-i 사용자 가이드 9 ㈜유니온커뮤니티 / 서울시 송파구 방이동 44-3 현대토픽스 빌딩 3층 (138-050) Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr 2.3. Specifications Item Spec Description CPU 32bit RISC 72MHz ST Micro Pin Pad 4key F1~F4 LED 3 LED (Red, White, Blue), 4 LED (key_Led) Flash Internal 256k Byte , External 8Mbyte Nor Flash Number of enrolled users 10,000 users 50,000 Log Voice Message Various languages supported (Possible to download from PC) Possible to control volume Buzzer Sound Possible to control volume Card Module 125KHz RF 13.56MHz Smart (1 Sam Card Socket Support) 125KHz HID Card Authentication Method Card RTC Internal RTC Support I/O 6 Dip Switch (485 ID Setting : 3pole, 485<->Wiegand In/Out change 1pole BLC015/BLC020/CP040 Select 2pole) Lock Control - If POE is supported, separate lock Controller is used - If POE is supported, EM, Strike, Motor Lock are possible to use RS-485 1 Port Interworking with 485 Controller Wiegand-In 1 Port Interworking with Wiegand-Type card reader Wiegand-Out 1 Port Display Wiegand signal output or success/fail RS-232 3 Port Debug Power 12 VDC
Smart-i 사용자 가이드 10 ㈜유니온커뮤니티 / 서울시 송파구 방이동 44-3 현대토픽스 빌딩 3층 (138-050) Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr 3. Environment settings 3.1.Check items before setting the environment 3.1.1. Entering menu ▶ [Hold F4 down] Æ (Red & Green LED On) Menu Mode If you hold [F4] key down longer than 4 seconds, you can enter menu mode. When you enter menu mode, red and green LED on a terminal are on to classify menu mode. To change from menu mode to waiting authentication mode, press [F4] button, or do not press any button longer than 10 sec so that it will automatically to change to waiting authentication mode. 3.2. Menu Configuration - [Fn~ long] means hold each function key down longer than 4 sec. Menu Mode [F4~ long] Enroll a user (Card) [F1~ long] Æ Flickering white LED for 5 sec Æ Swipe a card (Buzzing sound + blue LED light on) Enrolling a card is completed (Buzzing sound + red LED light on) Enrolling a card is failed Delete a user (Card) [F3~ long] Æ Flickering the white LED for 5 sec Æ Swipe a card(Buzzer + blue LED light on) Enrolling a card is completed. (Buzzer + red LED light on) Enrolling a card is failed. 4. How to use a terminal 4.1. Change to authentication mode Start a shift [F1], End a shift [F2], Start a break [F3], or Return from a break [F4] is pressed to change to correct authentication mode.
Smart-i 사용자 가이드 11 ㈜유니온커뮤니티 / 서울시 송파구 방이동 44-3 현대토픽스 빌딩 3층 (138-050) Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr 4.2. Authentication 4.2.1. Card Authentication Swipe a card on the card input area. 4.3. Control Dip Switch It has 6 switches, and they are divided in 485 ID Setting (3pole), changing 485 <-> Wiegand (1pole), and selecting BLC015/BLC020/CP040(2pole) ↓ 1 2 3 4 5 6 7 8 Function 485 ID Setting 485 <-> Wiegand BLC015/BLC020/CP040 Admin Not using※ VS-R20 enables to change to Wiegand In mode or to Wiegand Out mode with using SW52. (Each only supports Mode 1) Please check switch pins when using. When using Wiegand, check GND pin and DATA1, DATA0 pin (DATA1-DATA1 Connected, DATA0-DATA0 Connected)
Smart-i 사용자 가이드 12 ㈜유니온커뮤니티 / 서울시 송파구 방이동 44-3 현대토픽스 빌딩 3층 (138-050) Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr - 485 ID Setting (No.1,2 and 3 Switch) 1 2 3 ID Value Function 0 0 0 0 0 0 1 1 0 1 0 2 0 1 1 3 1 0 0 4 1 0 1 5 1 1 0 6 1 1 1 7 - Wiegand Setting (No.1,2 and 3 Switch) 1 2 3 Bits Function 0 0 0 26bit 1 1 1 34bit - Changing 485 <-> Wiegand (No. 4 Switch) 4 Mode Function 1 Weigand 0 RS485 - Changing BLC015/BLC020/CP040 (No. 5 and 6 Switch) 5 6 Equipment to use Function 0 0 BLC015 0 1 BLC020 1 0 CP040 1 1 Not using - Changing admin (NO.7 Switch) 8 Function Function 1 Use admin 0 Not using admin
Smart-i 사용자 가이드 13 ㈜유니온커뮤니티 / 서울시 송파구 방이동 44-3 현대토픽스 빌딩 3층 (138-050) Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.kr * NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

Navigation menu