Ubiquiti B2L 2.4GHz High performance 802.11b/g outdoor point to point radio User Manual b2l guide

Download:
Mirror Download [FCC.gov]
Document ID	1249840
Application ID	e/sOacg0nFzNd7/KweqMOg==
Document Description	manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	42.44kB (530459 bits)
Date Submitted	2010-03-08 00:00:00
Date Available	2010-03-08 00:00:00
Creation Date	2010-03-02 10:11:31
Producing Software	Mac OS X 10.5.8 Quartz PDFContext
Document Lastmod	2010-03-05 11:40:24
Document Title	b2l_guide
Document Creator	OmniGraffle Professional
Document Author:	Robert Pera

B2L
by Ubiquiti Networks
SYSTEM INFORMATION
Processor Specs
Memory Information
Networking Interface
Atheros AR2315 SOC, MIPS 4KC, 180MHz
16MB SDRAM, 4MB Flash
2 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface
REGULATORY / COMPLIANCE INFORMATION
FCC Part 15.247, IC RS210, CE
YES
Tolerance
+/-1dB
+/-1dB
+/-1dB
+/-1dB
6Mbps
9Mbps
12Mbps
18Mbps
24Mbps
36Mbps
48Mbps
54Mbps
+/-1dB
+/-1dB
+/-1dB
+/-1dB
+/-1dB
+/-1dB
+/-1dB
+/-1dB
802.11b
RADIO OPERATING FREQUENCY 2412-2462 MHz
TX SPECIFICATIONS
RX SPECIFICATIONS
DataRate
TX Power
Tolerance
DataRate
Sensitivity
1Mbps
28 dBm
+/-1dB
1Mbps
-97 dBm
2Mbps
28 dBm
+/-1dB
2Mbps
-96 dBm
5.5Mbps
28 dBm
+/-1dB
5.5Mbps
-95 dBm
11Mbps
28 dBm
+/-1dB
11Mbps
-92 dBm
28
28
28
28
28
24
23
22
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
+/-1dB
+/-1dB
+/-1dB
+/-1dB
+/-1dB
+/-1dB
+/-1dB
+/-1dB
802.11g OFDM
802.11g OFDM
802.11b
Wireless Approvals
RoHS Compliance
6Mbps
9Mbps
12Mbps
18Mbps
24Mbps
36Mbps
48Mbps
54Mbps
-94
-93
-91
-90
-86
-83
-77
-74
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
RANGE PERFORMANCE
Outdoor (BaseStation Antenna Dependent):
Over 15km
PHYSICAL / ELECTRICAL / ENVIRONMENTAL
Enclosure Size
Weight
Enclosure Characteristics
Mounting Kit
Max Power Consumption
Power Supply
Power Method
Operating Temperature
Operating Humidity
Shock and Vibration
12 in. length x 4 in. height x 1in. Width
0.9kg
Outdoor UV Stabalized Plastic
Pole Mounting Kit included
4 Watts
12V, 1A (12 Watts). Supply and injector included
Passive Power over Ethernet (pairs 4,5+; 7,8 return)
-20C to +70C
5 to 95% Condensing
ETSI300-019-1.4
SOFTWARE
visit www.ubnt.com/airos
www.ubnt.com
COMPLIANCE INFORMATION
FCC
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to pro-vide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
The antennas used for this transmitter must be installed to provide a separation
distance of at least following distance from all persons and must not be located or
operating in conjunction with any other antenna or transmitter.
36cm distance for the Grid Antenna
20cm distance for the Omni Antenna
Highest gains are 24dBi for Grid. Highest gains are 6dBi for Omni
INDUSTRY CANADA
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
Canada.
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
To reduce potential radio interference to other users, the antenna type and its
gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.)
is not more than that permitted for successful communication.
The device has been designed to operate with the antennas listed below and having a
maximum gain of 24dBi. Antennas not included in this list or having a gain greater than
24dBi are strictly prohibited for use with this device. The required antenna impedance is
50 ohms
This device must be professionally installed and is designed for for outdoor point-to-point
wireless links.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Apple Keywords                  : 
Author                          : Robert Pera
Create Date                     : 2010:03:02 10:11:31Z
Modify Date                     : 2010:03:05 11:40:24-08:00
Subject                         : 
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : Robert Pera
Description                     : 
Title                           : b2l_guide
Creator Tool                    : OmniGraffle Professional
Metadata Date                   : 2010:03:05 11:40:24-08:00
Keywords                        : 
Producer                        : Mac OS X 10.5.8 Quartz PDFContext
Document ID                     : uuid:beb3cf93-9937-4112-a9e8-a873add0e652
Instance ID                     : uuid:78623dac-5808-4109-a86e-dd9f777787e0
Page Count                      : 3

EXIF Metadata provided by EXIF.tools