Ubiquiti M2B 802.11 g/n 1x1 MIMO radio User Manual User guide

Download:
Mirror Download [FCC.gov]
Document ID	1242947
Application ID	0UEjcA3PpjwAIYp3CdPAbQ==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	117.08kB (1463470 bits)
Date Submitted	2010-02-18 00:00:00
Date Available	2010-02-23 00:00:00
Creation Date	2010-01-15 20:00:52
Producing Software	Mac OS X 10.5.8 Quartz PDFContext
Document Lastmod	2010-02-11 14:30:42
Document Title	User_guide
Document Creator	OmniGraffle Professional
Document Author:	Robert Pera

M2B
OEM Users Guide
TECHNICAL SPECIFICATIONS
SYSTEM INFORMATION
Processor Specs
Memory Information
Networking Interface
Atheros MIPS 24KC, 400MHz
32MB SDRAM, 8MB Flash
1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface
REGULATORY / COMPLIANCE INFORMATION
FCC Part 15.247, IC RS210, CE
YES
MCS0
MCS1
MCS2
MCS3
MCS4
MCS5
MCS6
MCS7
28
28
28
28
27
25
24
23
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
2412MHz-2462MHz
11g
OPERATING FREQUENCY
TX POWER SPECIFICATIONS
DataRate
Avg. TX
Tolerance
1-24Mbps
28 dBm
+/-2dB
36Mbps
27 dBm
+/-2dB
48Mbps
26 dBm
+/-2dB
54Mbps
24 dBm
+/-2dB
Airmax11n
Airmax 11n
11g
Wireless Approvals
RoHS Compliance
RX SPECIFICATIONS
DataRate
Sensitivity
1-24Mbps
-97 dBm min.
36Mbps
-80 dBm
48Mbps
-77 dBm
54Mbps
-75 dBm
Tolerance
+/-2dB
+/-2dB
+/-2dB
+/-2dB
MCS0
MCS1
MCS2
MCS3
MCS4
MCS5
MCS6
MCS7
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
+/-2dB
-96
-95
-92
-90
-86
-83
-77
-74
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
PHYSICAL / ELECTRICAL / ENVIRONMENTAL
Enclosure Size
Weight
Max Power Consumption
Power Supply
Power Method
Operating Temperature
Operating Humidity
Shock and Vibration
16cm length x 8cm width x 3cm height
0.5 kg
3.5 Watts
POE up to 24V DC (sold separately)
Passive Power over Ethernet (pairs 4,5+; 7,8 return)
-30C to 75C
5 to 95% Condensing
ETSI300-019-1.4
COMPLIANCE INFORMATION
FCC
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to pro-vide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
The antennas used for this transmitter must be installed to provide a separation
distance of at least following distance from all persons and must not be located or
operating in conjunction with any other antenna or transmitter.
38cm distance for the Grid Antenna
20cm distance for the Omni Antenna
Highest gains are 24dBi for Grid and 6dBi for Omni Antenna
INDUSTRY CANADA
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
Canada.
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
To reduce potential radio interference to other users, the antenna type and its
gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.)
is not more than that permitted for successful communication.
The device has been designed to operate with the antennas listed below and having a
maximum gain of 24dBi. Antennas not included in this list or having a gain greater than
24dBi are strictly prohibited for use with this device. The required antenna impedance is
50 ohms
This device must be professionally installed and is designed for for outdoor point-to-point
wireless links.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Apple Keywords                  : 
Author                          : Robert Pera
Create Date                     : 2010:01:15 20:00:52Z
Modify Date                     : 2010:02:11 14:30:42-08:00
Subject                         : 
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : Robert Pera
Description                     : 
Title                           : User_guide
Creator Tool                    : OmniGraffle Professional
Metadata Date                   : 2010:02:11 14:30:42-08:00
Keywords                        : 
Producer                        : Mac OS X 10.5.8 Quartz PDFContext
Document ID                     : uuid:2514aca9-3ac1-48d0-bd47-54ffa88b29e4
Instance ID                     : uuid:f259a7e7-649c-490d-a21a-a4363d4d8e9f
Page Count                      : 3

EXIF Metadata provided by EXIF.tools