Ubiquiti M5G 802.11 n radio User Manual user guide

Ubiquiti Networks, Inc. 802.11 n radio user guide

Contents

User manual

M5GOEM Users Guide
TECH SPECSDataRate Avg. TX Tolerance DataRate Sensitivity Tolerance1-24Mbps 20 dBm +/-2dB 1-24Mbps -97 dBm min. +/-2dB36Mbps 19 dBm +/-2dB 36Mbps -80 dBm +/-2dB48Mbps 18 dBm +/-2dB 48Mbps -77 dBm +/-2dB54Mbps 16 dBm +/-2dB 54Mbps -75 dBm +/-2dBMCS0 20 dBm +/-2dB MCS0 -96 dBm +/-2dBMCS1 20 dBm +/-2dB MCS1 -95 dBm +/-2dBMCS2 20 dBm +/-2dB MCS2 -92 dBm +/-2dBMCS3 20 dBm +/-2dB MCS3 -90 dBm +/-2dBMCS4 19 dBm +/-2dB MCS4 -86 dBm +/-2dBMCS5 17 dBm +/-2dB MCS5 -83 dBm +/-2dBMCS6 16 dBm +/-2dB MCS6 -77 dBm +/-2dBMCS7 15 dBm +/-2dB MCS7 -74 dBm +/-2dB5GHz 11n 5GHz 11n Shock and VibrationETSI300-019-1.4Power MethodPassive Power over Ethernet (pairs 4,5+; 7,8 return)Operating Temperature -30C to 75COperating Humidity5 to 95% CondensingMounting KitPole Mounting Kit includedMax Power Consumption3.5 WattsPower Supply5V USP+POE Adapter IncludedWeight0.5 kgEnclosure CharacteristicsOutdoor UV Stabalized PlasticPHYSICAL / ELECTRICAL / ENVIRONMENTALEnclosure Size16cm length x 8cm width x 3cm height OPERATING FREQUENCY 5745MHz-5825MHz 5GHz TX POWER SPECIFICATIONS5GHz RX SPECIFICATIONS 11a 11aREGULATORY / COMPLIANCE INFORMATIONWireless ApprovalsFCC Part 15.247, IC RS210, CERoHS ComplianceYESSYSTEM INFORMATIONProcessor SpecsAtheros MIPS 24KC, 400MHzMemory Information32MB SDRAM, 8MB FlashNetworking Interface1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface
COMPLIANCE INFORMATION FCC Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. ! The antennas used for this transmitter must be installed to provide a separation distance of at least following distance from all persons and must not be located or operating in conjunction with any other antenna or transmitter. 68.6cm distance for the Dish Antenna136.9cm distance for the Grid Antenna!INDUSTRY CANADAThis Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à! la norme NMB-003 du Canada. ! Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. !! To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication.! The device has been designed to operate with the antennas listed below and having a maximum gain of 28dBi. Antennas not included in this list or having a gain greater than 28dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohmsThis device must be professionally installed and is designed strictly for for outdoor point-to-point wireless links.

Navigation menu