Ubiquiti NS5 NanoStation5 User Manual NS2datasheet graffle

Ubiquiti Networks, Inc. NanoStation5 NS2datasheet graffle

Guide

www.ubnt.comNanoStation5User GuideUSER INSTRUCTIONS1. Launch web browser and type 192.168.1.20 to access NanoStation2. Enter "UBNT" for both username and password
www.ubnt.comTECHNICAL SPECIFICATIONSDataRate Avg.Power Tolerance DataRate Sensitivity Tolerance6Mbps 24 dBm +/-1.5dB 6Mbps -94 dBm +/-1.5dB9Mbps 24 dBm +/-1.5dB 9Mbps -93 dBm +/-1.5dB12Mbps 24 dBm +/-1.5dB 12Mbps -91 dBm +/-1.5dB18Mbps 24 dBm +/-1.5dB 18Mbps -90 dBm +/-1.5dB24Mbps 26 dBm +/-1.5dB 24Mbps -86 dBm +/-1.5dB36Mbps 22 dBm +/-1.5dB 36Mbps -83 dBm +/-1.5dB48Mbps 21 dBm +/-1.5dB 48Mbps -77 dBm +/-1.5dB54Mbps 19 dBm +/-1.5dB 54Mbps -74 dBm +/-1.5dB802.11a OFDM802.11a OFDMRANGE PERFORMANCETX SPECIFICATIONSRX SPECIFICATIONSANTENNAOutdoor (BaseStation Antenna Dependent):Over 10km Wireless Modular ApprovalsFCC Part 15.247, IC RS210, CERADIO OPERATING FREQUENCY 5.475-5.825GHzSYSTEM INFORMATIONProcessor SpecsAtheros AR2313 SOC, MIPS 4KC, 180MHzMemory Information16MB SDRAM, 4MB FlashNetworking Interface10/100 BASE-TX (Cat. 5, RJ-45) Ethernet InterfaceGain14dBiRoHS ComplianceYESREGULATORY / COMPLIANCE INFORMATIONMulti-PolarizedVSWR1.4:1Polarization SelectionSoftware ControlledFront to Back Ratio30dB+Polarization3dB Beamwidth Azimuth55 degrees3dB Beamwidth Elevation18 degrees12V, 1A (12 Watts). Supply and injector includedOperating Temperature -20C to +70COperating Humidity5 to 95% CondensingShock and VibrationPower SupplyAzimuthElevationPHYSICAL / ELECTRICAL / ENVIRONMENTALEnclosure Size26.4 cm x 8 cm x 3cmWeight0.4kgETSI300-019-1.4Enclosure CharacteristicsOutdoor UV Stabalized PlasticMounting KitPole Mounting Kit includedPower MethodPassive Power over Ethernet (pairs 4,5+; 7,8 return)Max Power Consumption5 Watts
www.ubnt.comNOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.!Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.ADDITIONAL INFORMATION AND COMPLIANCEThis is a Point-to-Point CPE Wireless Device.

Navigation menu