Ubiquiti UCKG2 UniFi CLOUD KEY GEN2 User Manual UniFi Cloud Key UCK G2 Quick Start Guide

Download:
Mirror Download [FCC.gov]
Document ID	3757625
Application ID	/r7W+M/z6Bd8gQZvUxKt2Q==
Document Description	QSG User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	224.91kB (2811418 bits)
Date Submitted	2018-02-21 00:00:00
Date Available	2018-08-21 00:00:00
Creation Date	2018-01-17 11:16:33
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2018-02-13 16:51:38
Document Title	UniFi Cloud Key UCK-G2 Quick Start Guide
Document Creator	Adobe InDesign CC 2017 (Macintosh)
Document Author:	Aaron Jacoby

Model: UCK-G2
Introduction
Thank you for purchasing the Ubiquiti Networks®
UniFi® Cloud Key Gen2. This Quick Start Guide is
designed to guide you through installation and also
includes warranty terms.
Package Contents
Model: UC-CK
UniFi Cloud Key Gen2
Quick Start Guide
System Requirement
Web Browser: Google Chrome (Other browsers may
have limited functionality.)
TERMS OF USE: All Ethernet cabling runs must use CAT5 (or above). It is the
professional installer’s responsibility to follow local country regulations,
including operation within legal frequency channels, output power, indoor
cabling requirements, and Dynamic Frequency Selection (DFS) requirements.
Network Topology Requirement
A DHCP-enabled network (for the UniFi Cloud Key to
obtain an IP address)
Sample Network Diagram
UniFi Cloud Key
(UniFi Controller)
UAP-AC-HD
UAP-AC-PRO
UAP-AC-M-PRO
US-16-150W
LAN
USG-PRO-4
(DHCP Server)
WAN
Internet
Remote Access to
UniFi Controller
All UniFi devices also support off-site management
controllers. For setup details, see the User Guide on
the website: www.ubnt.com/download/unifi
Hardware Overview
Front Panel LED
LED Color
White
Status
Factory defaults.
Flashing White Initializing.
Alternating
White/Blue
Device is busy; do not touch or
unplug it. This usually indicates
that a process such as a firmware
upgrade is taking place.
Blue
Device is working properly.
Front Panel
LCD Screen
LCD Screen Displays system status information.
Back Panel
Reset Button
microSD Slot
Power Button
Ethernet Port
USB Type-C
Power Port
Reset The Reset button serves two functions:
• Restart Press and release the Reset button quickly.
• Restore to Factory Default Settings Press and hold
the Reset button for more than five seconds.
Power Button Press to turn the Cloud Key on or off.
USB Type-C Power Optional power source (5V,
minimum 1A) if PoE is not available.
microSD Slot Reserved for future use.
Ethernet Connects to a DHCP server on your LAN.
Power can be provided by an 802.3af PoE switch, such
as the UniFi PoE Switch.
Side Panel
Rack-Mount
Notch
Rack-Mount Notch Locks the Cloud Key into place
when using with the optional rack-mount accessory
(not included).
*640-00370-01*
640-00370-01
Hardware Installation
1. Connect the Ethernet Cable to the Ethernet port.
2. Connect the other end of the Ethernet Cable to a
port on a network switch, such as a UniFi Switch.
11
13
15
10
17
12
19
14
21
16
22
18
20
SFP
22
24
SFP
Powering the UniFi Cloud Key
Use an 802.3af-compliant switch, such as a UniFi
Switch, or a USB power source (not included).
UniFi Switch
The UniFi Cloud Key can be powered by a UniFi PoE
Switch or other 802.3af-compliant switch.
11
13
15
10
17
12
19
14
21
16
22
18
20
SFP
22
24
SFP
UniFi Switch Power Connection Diagram
USB Power Source
Connect the USB cable (not included) from the UniFi
Cloud Key directly to a USB power source
(5V, minimum 1A).
USB Power Connection Diagram
Software Installation
The UniFi Controller software is pre-installed on the
UniFi Cloud Key. Use one of the following methods
to launch the software:
• If you are using Chrome, go to the Chrome
Instructions section (recommended).
• If you are using a different web browser, go to the
Instructions for Other Web Browsers section.
Chrome Instructions
1. Ensure that your host system is on the same
Layer-2 network as the UniFi Cloud Key.
2. Launch the Chrome web browser and type
https://unifi.ubnt.com in the address field. Press
enter (PC) or return (Mac).
https://192.168.1.20
3. Enter the username and password for your UBNT
account. Click Sign In.
4. Click Find Cloud Key.
5. If the Ubiquiti® Device Discovery Tool is already
installed, proceed to step 7.
If the tool is not installed, you will be prompted
to add it. Proceed to step 6.
6. To install the tool:
a. Click Install.
b. Click Add app to confirm.
7. The Ubiquiti Device Discovery Tool will search for
the UniFi Cloud Key. Select it to continue.
8. Configure the UniFi Controller:
a. Select the appropriate country.
b. Select the appropriate time zone.
c. Enter an admin name in the Admin Name field
and a password in the Password field to use
when accessing the management interface.
d. Confirm your password in the Confirm
Password field.
e. Keep the IP address or enter a hostname in
the Controller Hostname field.
f. If you have changed the default username
or password of the UniFi Cloud Key, then
you must set up login credentials. Select
Use non‑default SSH credentials. Enter a
username in the SSH Username field, and
enter a password in the SSH Password field.
g. Click Submit to save your changes.
9. Wait for the UniFi Controller to be adopted, and
then select it.
10. Click Launch Site.
The UniFi Controller management interface will
appear. You can manage your UniFi devices and
view network statistics using the UniFi Controller
management interface.
For information on configuring and using the UniFi
Controller software, refer to the User Guide located
on our website: www.ubnt.com/download/unifi
Instructions for Other Web Browsers
1. Ensure that your host system is on the same
Layer-2 network as the UniFi Cloud Key.
2. The UniFi Cloud Key is set to DHCP by default, so
it will try to automatically obtain an IP address.
Assign a specific IP address to the UniFi Cloud
Key, or check the DHCP server for its IP address.
Note: The default fallback IP address of the
UniFi Cloud Key is 192.168.1.30.
3. Launch the web browser. In the address field, type
https:// followed by the appropriate IP address.
Press enter (PC) or return (Mac).
4. Click Manage to run the UniFi Setup Wizard.
Note: You can click Configure to change
the settings of the UniFi Cloud Key. The
default login is ubnt/ubnt.
5. The UniFi Setup Wizard screen appears. Follow
the on-screen instructions. For step-by-step
instructions, refer to the User Guide, which is
available at www.ubnt.com/download/unifi
UniFi Setup Wizard
Thank you for purchasing UniFi, Ubiquiti’s Enterprise WiFi Solution. You will be able to setup your
controller in a few minutes.
Select your timezone
Select your country
United States
Enable Auto Backup
(UTC-08:00) Pacific Time (US & Canada)
ON
Alternatively you can restore from a previous backup.
NEXT
After the UniFi Setup Wizard is finished, the UniFi
Controller management interface will appear. Log in
with the Admin Name and Password that you created,
and then you can manage your UniFi devices and
view network statistics using the UniFi Controller
management interface.
For information on configuring and using the UniFi
Controller software, refer to the User Guide.
Specifications
UCK-G2
Dimensions
Weight
Enclosure
Management Interface
Networking Interface
Buttons
Power Method
25.88 x 46.80 x 119.75 mm
(1.02 x 1.84 x 4.71")
150 g (5.29 oz)
Aluminum
UniFi
(1) 10/100/1000 Ethernet Port
(1) Reset to Defaults
Power
Standard 802.3af PoE, DC 5V, 1A
Power Supply
802.3af PoE or
USB-C 5V, Minimum 1A
Max. Power
Consumption
5W
Operating Temperature
Operating Humidity
Certifications
0 to 35° C
(32 to 104° F)
20 to 80% Noncondensing
CE, FCC, IC
Safety Notices
1.
Read, follow, and keep these instructions.
2.
Heed all warnings.
3.
Only use attachments/accessories specified by the
manufacturer.
WARNING: Do not use this product in location
that can be submerged by water.
WARNING: Avoid using this product during an
electrical storm. There may be a remote risk of
electric shock from lightning.
Electrical Safety Information
1.
Compliance is required with respect to voltage, frequency,
and current requirements indicated on the manufacturer’s
label. Connection to a different power source than those
specified may result in improper operation, damage to
the equipment or pose a fire hazard if the limitations are
not followed.
2.
There are no operator serviceable parts inside this
equipment. Service should be provided only by a qualified
service technician.
Limited Warranty
UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that
the product(s) furnished hereunder (the “Product(s)”) shall be
free from defects in material and workmanship for a period of
one (1) year from the date of shipment by UBIQUITI NETWORKS
under normal use and operation. UBIQUITI NETWORKS’ sole
and exclusive obligation and liability under the foregoing
warranty shall be for UBIQUITI NETWORKS, at its discretion, to
repair or replace any Product that fails to conform to the above
warranty during the above warranty period. The expense of
removal and reinstallation of any Product is not included in
this warranty. The warranty period of any repaired or replaced
Product shall not extend beyond its original term.
Warranty Conditions
The above warranty does not apply if the Product:
(I)
has been modified and/or altered, or an addition
made thereto, except by Ubiquiti Networks, or Ubiquiti
Networks’ authorized representatives, or as approved
by Ubiquiti Networks in writing;
(II)
has been painted, rebranded or physically modified
in any way;
(III)
has been damaged due to errors or defects in cabling;
(IV)
has been subjected to misuse, abuse, negligence,
abnormal physical, electromagnetic or electrical stress,
including lightning strikes, or accident;
(V)
has been damaged or impaired as a result of using
third party firmware;
(VI)
has no original Ubiquiti MAC label, or is missing any
other original Ubiquiti label(s); or
(VII)
has not been received by Ubiquiti within 30 days of
issuance of the RMA.
In addition, the above warranty shall apply only if: the product
has been properly installed and used at all times in accordance,
and in all material respects, with the applicable Product
documentation; all Ethernet cabling runs use CAT5 (or above),
and for outdoor installations, shielded Ethernet cabling is used,
and for indoor installations, indoor cabling requirements are
followed.
Returns
No Products will be accepted for replacement or repair without
obtaining a Return Materials Authorization (RMA) number
from UBIQUITI NETWORKS during the warranty period, and the
Products being received at UBIQUITI NETWORKS’ facility freight
prepaid in accordance with the RMA process of UBIQUITI
NETWORKS. Products returned without an RMA number will
not be processed and will be returned freight collect or subject
to disposal. Information on the RMA process and obtaining
an RMA number can be found at: www.ubnt.com/support/
warranty
Disclaimer
EXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN,
UBIQUITI NETWORKS, ITS AFFILIATES, AND ITS AND THEIR
THIRD PARTY DATA, SERVICE, SOFTWARE AND HARDWARE
PROVIDERS HEREBY DISCLAIM AND MAKE NO OTHER
REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS,
IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED
TO, REPRESENTATIONS, GUARANTEES, OR WARRANTIES OF
MERCHANTABILITY, ACCURACY, QUALITY OF SERVICE OR
RESULTS, AVAILABILITY, SATISFACTORY QUALITY, LACK OF
VIRUSES, QUIET ENJOYMENT, FITNESS FOR A PARTICULAR
PURPOSE AND NON-INFRINGEMENT AND ANY WARRANTIES
ARISING FROM ANY COURSE OF DEALING, USAGE OR
TRADE PRACTICE IN CONNECTION WITH SUCH PRODUCTS
AND SERVICES. BUYER ACKNOWLEDGES THAT NEITHER
UBIQUITI NETWORKS NOR ITS THIRD PARTY PROVIDERS
CONTROL BUYER’S EQUIPMENT OR THE TRANSFER OF
DATA OVER COMMUNICATIONS FACILITIES, INCLUDING THE
INTERNET, AND THAT THE PRODUCTS AND SERVICES MAY
BE SUBJECT TO LIMITATIONS, INTERRUPTIONS, DELAYS,
CANCELLATIONS AND OTHER PROBLEMS INHERENT IN THE
USE OF COMMUNICATIONS FACILITIES. UBIQUITI NETWORKS,
ITS AFFILIATES AND ITS AND THEIR THIRD PARTY PROVIDERS
ARE NOT RESPONSIBLE FOR ANY INTERRUPTIONS, DELAYS,
CANCELLATIONS, DELIVERY FAILURES, DATA LOSS, CONTENT
CORRUPTION, PACKET LOSS, OR OTHER DAMAGE RESULTING
FROM ANY OF THE FOREGOING. In addition, UBIQUITI
NETWORKS does not warrant that the operation of the Products
will be error-free or that operation will be uninterrupted. In no
event shall UBIQUITI NETWORKS be responsible for damages
or claims of any nature or description relating to system
performance, including coverage, buyer’s selection of products
(including the Products) for buyer’s application and/or failure
of products (including the Products) to meet government or
regulatory requirements.
Limitation of Liability
EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO
EVENT WILL UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR
SUPPLIERS BE LIABLE FOR DIRECT, SPECIAL, INCIDENTAL,
CONSEQUENTIAL OR OTHER DAMAGES (INCLUDING LOST
PROFIT, LOST DATA, OR DOWNTIME COSTS), ARISING OUT OF
THE USE, INABILITY TO USE, OR THE RESULTS OF USE OF THE
PRODUCT, WHETHER BASED IN WARRANTY, CONTRACT, TORT
OR OTHER LEGAL THEORY, AND WHETHER OR NOT ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES.
Note
Some countries, states and provinces do not allow exclusions
of implied warranties or conditions, so the above exclusion
may not apply to you. You may have other rights that vary from
country to country, state to state, or province to province. Some
countries, states and provinces do not allow the exclusion or
limitation of liability for incidental or consequential damages,
so the above limitation may not apply to you. EXCEPT TO
THE EXTENT ALLOWED BY LOCAL LAW, THESE WARRANTY
TERMS DO NOT EXCLUDE, RESTRICT OR MODIFY, AND ARE
IN ADDITION TO, THE MANDATORY STATUTORY RIGHTS
APPLICABLE TO THE LICENSE OF ANY SOFTWARE (EMBEDDED
IN THE PRODUCT) TO YOU. The United Nations Convention on
Contracts for the International Sale of Goods shall not apply to
any transactions regarding the sale of the Products.
Compliance
FCC
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions.
1.
This device may not cause harmful interference, and
2.
This device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operations of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
This radio transmitter (FCC: SWX-UCKG2) has been approved
by FCC.
RF Exposure Warning
The antennas used for this transmitter must be installed
to provide a separation distance of at least 20 cm from all
persons and must not be located or operating in conjunction
with any other antenna or transmitter.
Les antennes utilisées pour ce transmetteur doivent être
installé en considérant une distance de séparation de toute
personnes d’au moins 20 cm et ne doivent pas être localisé ou
utilisé en conflit avec tout autre antenne ou transmetteur.
ISED Canada
CAN ICES-3(A)/NMB-3(A)
This device complies with ISED Canada licence-exempt
RSS standard(s). Operation is subject to the following two
conditions:
1.
This device may not cause interference, and
2.
This device must accept any interference, including
interference that may cause undesired operation of the
device.
This radio transmitter (IC: 6545A-UCKG2) has been approved
by ISED Canada.
CAN ICES-3(A)/NMB-3(A)
Le présent appareil est conforme aux CNR d’ISDE Canada
applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes :
1.
l’appareil ne doit pas produire de brouillage;
2.
l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre
le fonctionnement.
Le présent émetteur radio (IC : 6545A-UCKG2) a été approuvé
par ISDE Canada.
CE Marking
CE marking on this product represents the product is in
compliance with all directives that are applicable to it.
RoHS/WEEE Compliance Statement
English
European Directive 2012/19/EU requires that the equipment
bearing this symbol on the product and/or its packaging must
not be disposed of with unsorted municipal waste. The symbol
indicates that this product should be disposed of separately
from regular household waste streams. It is your responsibility
to dispose of this and other electric and electronic equipment
via designated collection facilities appointed by the
government or local authorities. Correct disposal and recycling
will help prevent potential negative consequences to the
environment and human health. For more detailed information
about the disposal of your old equipment, please contact your
local authorities, waste disposal service, or the shop where you
purchased the product.
Deutsch
Die Europäische Richtlinie 2012/19/EU verlangt, dass
technische Ausrüstung, die direkt am Gerät und/oder an der
Verpackung mit diesem Symbol versehen ist, nicht zusammen
mit unsortiertem Gemeindeabfall entsorgt werden darf. Das
Symbol weist darauf hin, dass das Produkt von regulärem
Haushaltmüll getrennt entsorgt werden sollte. Es liegt in Ihrer
Verantwortung, dieses Gerät und andere elektrische und
elektronische Geräte über die dafür zuständigen und von
der Regierung oder örtlichen Behörden dazu bestimmten
Sammelstellen zu entsorgen. Ordnungsgemäßes Entsorgen
und Recyceln trägt dazu bei, potentielle negative Folgen für
Umwelt und die menschliche Gesundheit zu vermeiden. Wenn
Sie weitere Informationen zur Entsorgung Ihrer Altgeräte
benötigen, wenden Sie sich bitte an die örtlichen Behörden
oder städtischen Entsorgungsdienste oder an den Händler, bei
dem Sie das Produkt erworben haben.
Español
La Directiva 2012/19/UE exige que los equipos que lleven este
símbolo en el propio aparato y/o en su embalaje no deben
eliminarse junto con otros residuos urbanos no seleccionados.
El símbolo indica que el producto en cuestión debe separarse
de los residuos domésticos convencionales con vistas a
su eliminación. Es responsabilidad suya desechar este y
cualesquiera otros aparatos eléctricos y electrónicos a través de
los puntos de recogida que ponen a su disposición el gobierno
y las autoridades locales. Al desechar y reciclar correctamente
estos aparatos estará contribuyendo a evitar posibles
consecuencias negativas para el medio ambiente y la salud
de las personas. Si desea obtener información más detallada
sobre la eliminación segura de su aparato usado, consulte a las
autoridades locales, al servicio de recogida y eliminación de
residuos de su zona o pregunte en la tienda donde adquirió
el producto.
Français
La directive européenne 2012/19/UE exige que l’équipement
sur lequel est apposé ce symbole sur le produit et/ou son
emballage ne soit pas jeté avec les autres ordures ménagères.
Ce symbole indique que le produit doit être éliminé dans un
circuit distinct de celui pour les déchets des ménages. Il est de
votre responsabilité de jeter ce matériel ainsi que tout autre
matériel électrique ou électronique par les moyens de collecte
indiqués par le gouvernement et les pouvoirs publics des
collectivités territoriales. L’élimination et le recyclage en bonne
et due forme ont pour but de lutter contre l’impact néfaste
potentiel de ce type de produits sur l’environnement et la santé
publique. Pour plus d’informations sur le mode d’élimination
de votre ancien équipement, veuillez prendre contact avec les
pouvoirs publics locaux, le service de traitement des déchets,
ou l’endroit où vous avez acheté le produit.
Italiano
La direttiva europea 2012/19/UE richiede che le
apparecchiature contrassegnate con questo simbolo sul
prodotto e/o sull’imballaggio non siano smaltite insieme ai
rifiuti urbani non differenziati. Il simbolo indica che questo
prodotto non deve essere smaltito insieme ai normali rifiuti
domestici. È responsabilità del proprietario smaltire sia
questi prodotti sia le altre apparecchiature elettriche ed
elettroniche mediante le specifiche strutture di raccolta
indicate dal governo o dagli enti pubblici locali. Il corretto
smaltimento ed il riciclaggio aiuteranno a prevenire
conseguenze potenzialmente negative per l’ambiente e per
la salute dell’essere umano. Per ricevere informazioni più
dettagliate circa lo smaltimento delle vecchie apparecchiature
in Vostro possesso, Vi invitiamo a contattare gli enti pubblici
di competenza, il servizio di smaltimento rifiuti o il negozio nel
quale avete acquistato il prodotto.
Declaration of Conformity
български [Bulgarian] С настоящото UBIQUITI NETWORKS декларира, че този тип
радиосъоръжение UCK-G2 е в съответствие с Директива 2014/53/ЕС. Цялостният
текст на ЕС декларацията за съответствие може да се намери на следния интернет
адрес: www.ubnt.com/compliance
Hrvatski [Croatian] UBIQUITI NETWORKS ovime izjavljuje da je radijska oprema tipa
UCK-G2 u skladu s Direktivom 2014/53/EU. Cjeloviti tekst EU izjave o sukladnosti
dostupan je na sljedećoj internetskoj adresi: www.ubnt.com/compliance
Čeština [Czech] Tímto UBIQUITI NETWORKS prohlašuje, že typ rádiového zařízení
UCK-G2 je v souladu se směrnicí 2014/53/EU. Úplné znění EU prohlášení o shodě je k
dispozici na této internetové adrese: www.ubnt.com/compliance
Dansk [Danish] Hermed erklærer UBIQUITI NETWORKS, at radioudstyrstypen UCK-G2
er i overensstemmelse med direktiv 2014/53/EU. EU‑overensstemmelseserklæringens
fulde tekst kan findes på følgende internetadresse: www.ubnt.com/compliance
Nederlands [Dutch] Hierbij verklaar ik, UBIQUITI NETWORKS, dat het type
radioapparatuur UCK-G2 conform is met Richtlijn 2014/53/EU. De volledige tekst
van de EU-conformiteitsverklaring kan worden geraadpleegd op het volgende
internetadres: www.ubnt.com/compliance
English Hereby, UBIQUITI NETWORKS declares that the radio equipment
type UCK-G2 is in compliance with Directive 2014/53/EU. The full text of the
EU declaration of conformity is available at the following internet address:
www.ubnt.com/compliance
Eesti keel [Estonian] Käesolevaga deklareerib UBIQUITI NETWORKS, et
käesolev raadioseadme tüüp UCK-G2 vastab direktiivi 2014/53/EL nõuetele. ELi
vastavusdeklaratsiooni täielik tekst on kättesaadav järgmisel internetiaadressil:
www.ubnt.com/compliance
Suomi [Finnish] UBIQUITI NETWORKS vakuuttaa, että radiolaitetyyppi UCK-G2
on direktiivin 2014/53/EU mukainen. EU‑vaatimustenmukaisuusvakuutuksen
täysimittainen teksti on saatavilla seuraavassa internetosoitteessa:
www.ubnt.com/compliance
Français [French] Le soussigné, UBIQUITI NETWORKS, déclare que l’équipement
radioélectrique du type UCK-G2 est conforme à la directive 2014/53/UE. Le texte
complet de la déclaration UE de conformité est disponible à l’adresse internet
suivante: www.ubnt.com/compliance
Deutsch [German] Hiermit erklärt UBIQUITI NETWORKS, dass der Funkanlagentyp
UCK-G2 der Richtlinie 2014/53/EU entspricht. Der vollständige Text der
EU-Konformitätserklärung ist unter der folgenden Internetadresse verfügbar:
www.ubnt.com/compliance
Ελληνικά [Greek] Με την παρούσα ο/η UBIQUITI NETWORKS, δηλώνει ότι ο
ραδιοεξοπλισμός UCK-G2 πληροί την οδηγία 2014/53/ΕΕ. Το πλήρες κείμενο της
δήλωσης συμμόρφωσης ΕΕ διατίθεται στην ακόλουθη ιστοσελίδα στο διαδίκτυο:
www.ubnt.com/compliance
Magyar [Hungarian] UBIQUITI NETWORKS igazolja, hogy a UCK-G2 típusú
rádióberendezés megfelel a 2014/53/EU irányelvnek. Az EU-megfelelőségi nyilatkozat
teljes szövege elérhető a következő internetes címen: www.ubnt.com/compliance
Íslenska [Icelandic] Hér með lýsir UBIQUITI NETWORKS yfir því að UCK-G2
er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun
2014/53/EU. Fullur texti ESB samræmisyfirlýsing er að finna á eftirfarandi netfangi:
www.ubnt.com/compliance
Italiano [Italian] Il fabbricante, UBIQUITI NETWORKS, dichiara che il tipo di
apparecchiatura radio UCK-G2 è conforme alla direttiva 2014/53/UE. Il testo
completo della dichiarazione di conformità UE è disponibile al seguente indirizzo
Internet: www.ubnt.com/compliance
Latviešu valoda [Latvian] Ar šo UBIQUITI NETWORKS deklarē, ka radioiekārta UCK-G2
atbilst Direktīvai 2014/53/ES. Pilns ES atbilstības deklarācijas teksts ir pieejams šādā
interneta vietnē: www.ubnt.com/compliance
Lietuvių kalba [Lithuanian] Aš, UBIQUITI NETWORKS, patvirtinu, kad radijo įrenginių
tipas UCK-G2 atitinka Direktyvą 2014/53/ES. Visas ES atitikties deklaracijos tekstas
prieinamas šiuo interneto adresu: www.ubnt.com/compliance
Malti [Maltese] B’dan, UBIQUITI NETWORKS, niddikjara li dan it-tip ta’ tagħmir tar-radju
UCK-G2 huwa konformi mad-Direttiva 2014/53/UE. Id-dikjarazzjoni tal-konformità tista’
tiġi kkonsultata minn www.ubnt.com/compliance
Norsk [Norwegian] UBIQUITI NETWORKS erklærer herved at utstyret UCK-G2
er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv
2014/53/EU. Den fulle teksten til EU-samsvarserklæringen er tilgjengelig på følgende
internettadresse: www.ubnt.com/compliance
Polski [Polish] UBIQUITI NETWORKS niniejszym oświadcza, że typ urządzenia
radiowego UCK-G2 jest zgodny z dyrektywą 2014/53/UE. Pełny tekst deklaracji
zgodności UE jest dostępny pod następującym adresem internetowym:
www.ubnt.com/compliance
Português [Portuguese] O(a) abaixo assinado(a) UBIQUITI NETWORKS declara que
o presente tipo de equipamento de rádio UCK-G2 está em conformidade com a
Diretiva 2014/53/UE. O texto integral da declaração de conformidade está disponível
no seguinte endereço de Internet: www.ubnt.com/compliance
Română [Romanian] Prin prezenta, UBIQUITI NETWORKS declară că tipul de
echipamente radio UCK-G2 este în conformitate cu Directiva 2014/53/UE. Textul
integral al declarației UE de conformitate este disponibil la următoarea adresă internet:
www.ubnt.com/compliance
Slovenčina [Slovak] UBIQUITI NETWORKS týmto vyhlasuje, že rádiové zariadenie
typu UCK-G2 je v súlade so smernicou 2014/53/EÚ. Úplné EÚ vyhlásenie o zhode je k
dispozícii na tejto internetovej adrese: www.ubnt.com/compliance
Slovenščina [Slovenian] UBIQUITI NETWORKS potrjuje, da je tip radijske opreme
UCK-G2 skladen z Direktivo 2014/53/EU. Celotno besedilo izjave EU o skladnosti je na
voljo na naslednjem spletnem naslovu: www.ubnt.com/compliance
Español [Spanish] Por la presente, UBIQUITI NETWORKS declara que el tipo de equipo
radioeléctrico UCK-G2 es conforme con la Directiva 2014/53/UE. El texto completo de
la declaración UE de conformidad está disponible en la dirección Internet siguiente:
www.ubnt.com/compliance
Svenska [Swedish] Härmed försäkrar UBIQUITI NETWORKS att denna typ av
radioutrustning UCK-G2 överensstämmer med direktiv 2014/53/EU. Den fullständiga
texten till EU-försäkran om överensstämmelse finns på följande webbadress:
www.ubnt.com/compliance
Online Resources
Website www.ubnt.com
Support help.ubnt.com
Community community.ubnt.com
Downloads downloads.ubnt.com
Ubiquiti Networks, Inc.
685 Third Avenue, 27th Floor
New York, NY 10017
USA
©2015-2018 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti,
Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam
logo, and UniFi are trademarks or registered trademarks of
Ubiquiti Networks, Inc. in the United States and in other countries.
All other trademarks are the property of their respective owners.
AJ011718

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Author                          : Aaron Jacoby
Create Date                     : 2018:01:17 11:16:33-08:00
Modify Date                     : 2018:02:13 16:51:38+08:00
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : XMP Core 5.1.2
Format                          : application/pdf
Title                           : UniFi Cloud Key UCK-G2 Quick Start Guide
Creator                         : Aaron Jacoby
Rights                          : © 2017 Ubiquiti Networks, Inc. All rights reserved.
Subject                         : UniFi Cloud Key, UCK-G2, Ubiquiti Networks, UniFi Controller
Description                     : Custom Size 134 x 61 mm
Metadata Date                   : 2018:01:17 11:34:14-08:00
Creator Tool                    : Adobe InDesign CC 2017 (Macintosh)
Instance ID                     : uuid:bd6a9085-1e0e-dc4f-b535-ac18d918b719
Original Document ID            : xmp.did:F77F11740720681180839ACE20804D07
Document ID                     : xmp.id:51ac752e-fe2b-429a-9935-e7a7f1a6d5cc
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:8b5ce373-843c-476a-89f0-876c832ad12c
Derived From Document ID        : xmp.did:30307a9f-7996-48a2-bbdb-9540ccd7ff2d
Derived From Original Document ID: xmp.did:F77F11740720681180839ACE20804D07
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2017 (Macintosh)
History Changed                 : /
History When                    : 2018:01:17 11:16:33-08:00
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Layout                     : SinglePage
Page Count                      : 24

EXIF Metadata provided by EXIF.tools