Ubiquiti ULEDAT UniFi LED User Manual UniFi LED Panel ULED AT Quick Start Guide

Ubiquiti Networks, Inc. UniFi LED UniFi LED Panel ULED AT Quick Start Guide

Users Manual

LEDLED Panel with  PoE+ TechnologyModel: ULED-AT
IntroductionThank you for purchasing the Ubiquiti Networks® UniFi®LED Panel. This Quick Start Guide is designed to guide you through installation and includes warranty terms.Package ContentsLEDLED Panel with  PoE+ TechnologyModel: ULP2PEUniFi LED Panel Quick Start GuideSystem Requirements•  An 802.3at-compliant network switch•  UniFi Enterprise of Things (EoT) mobile app software•  Mobile device: iOS 10 or Android 5.0•  UniFi EoT Controller Software•  Computer: Linux, MacOSX, or Microsoft Windows 7/8/10•  Web Browser: Google Chrome (Other browsers may have limited functionality.)•  UniFi Dimmer (model UDIM-AT)TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and earth grounding must be used as conditions of product warranty. TOUGHCable™ is designed for outdoor installations. It is the professional installer’s responsibility to follow local country regulations, including operation within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements.
Network Topology RequirementsThere are three ways to control the UniFi LED Panel:UniFi Dimmer  Users in the immediate vicinity control the UniFi LED Panel using the UniFi Dimmer.UniFi EoT App over Layer 2 Network  A local user runs the app to connect to a UniFi AP on the same Layer 2 network as the UniFi LED Panel.UniFi EoT Controller over Layer 2 Network  Alocal user runs the EoT Controller software on the same Layer 2 network as the UniFi LED Panel. UniFi PoE SwitchUSG-PRO-4(DHCP Server)InternetLANWANUAP-AC-PROUDIM-ATUniFi EoTApp25W 802.3at PoE+ULED-ATUniFi Application Server*ORUniFi Cloud Key*UniFi EoTControllerSample Network Diagram*  Available starting with production version of ULED-AT (beta version requires local installation of the EoT Controller).
Network topology requirements are as follows:•  DHCP-enabled network (for the UniFi LED Panel to obtain an IP address)•  For UniFi Dimmer only:  A UniFi Dimmer connected to the same Layer 2 network as the UniFi LED Panel•  For EoT Controller Software:  A UniFi Cloud Key* or UniFi Application Server* running the UniFi EoT Controller software and connected to the same Layer 2 network as the UniFi LED Panel •  For EoT App only:  A UniFi AP connected to the same Layer 2 network as the UniFi LED Panel*  Available starting with production version of ULED-AT (beta version requires local installation of the EoT Controller).*640-00332-02*640-00332-02
Hardware OverviewRESETStatus LED ResetPoE+LEDLED Color StatusFlashing White Initializing.Steady White Factory default, waiting for adoption.Alternating White/Blue Firmware upgrade is taking place.Steady Blue Adopted/System ready.PortPoE+  The PoE+ port is a 10/100 Ethernet port used to connect the power and should be connected to the LAN. Power is provided by a UniFi Switch with PoE+.Note: The PoE+ port requires 25W of power, which can be supplied by an 802.3at-compliant UniFi Switch.ButtonReset  The Reset button serves two functions for the UniFi LED Panel:•  Restart  Press and release the Reset button quickly.•  Restore to Factory Default Settings  Press and hold the Reset button for more than five seconds.
InstallationTo install and configure the UniFi LED Panel:1.  Connect one end of an Ethernet cable to the PoE+ port on the back of the UniFi LED Panel.  RESET2.  Connect the other end of the cable to an 802.3at-compliant switch port that can provide 25W PoE+.3.  Lift the panel and seat it in an opening in the ceiling grid.
Configuring the UniFi LED PanelFollow the instructions for the software you wish to use:UniFi EoT App:1.  Install the UniFi EoT app on your smartphone or mobile device. The app is available from the App Store or GooglePlay™ Store. 2.  Launch the app.3.  Follow the on-screen instructions to configure the UniFi LED Panel.
UniFi EoT Controller software:1.  Install the latest version of the UniFi EoT Controller software on a computer on the same Layer 2 network as the UniFi LED Panel. The software is available at: https://www.ubnt.com/download/unifi2.  Execute the following file: eot-controller-be3.  Launch a web browser and go to http://localhost:90804.  Enter your desired Username and Password, and re-enter the password to verify. Enter your Email, and select your Country and Timezone. Click Sign In.5.  The UniFi EoT Controller will appear, allowing you to configure the UniFi LED Panel, as well as customize other settings. For additional details on the UniFi EoT Controller, refer to the User Guide available at:  www.ubnt.com/download/unifi
SpecificationsULED-ATDimensions 602 x 602 x 56.7 mm (23.7 x 23.7 x 2.23")Weight  4.5 kg (9.92 lb)Networking Interface 10/100 Mbps Ethernet PortConnectivity Bluetooth 4.0Buttons ResetLEDs StatusPower Method 802.3at PoE+Supported Voltage Range Standard PoE+ 42.5-57.0VMax. Power Consumption 25.5WMounting Standard T-GridOperating Temperature 10 to 40° C (50 to 104° F)Operating Humidity 10 to 90% NoncondensingCertications CE, FCC, ICLightingInitial Delivered Luminance (Max.)2400 lmEfcacy 100 lm/W*CCT 4,000 KL80 > 50,000 hrsCRI > 80Beam Angle 114°Indoor/Outdoor Use Indoor*  Based on power delivered to the LED Panel
Safety Notices1.  Read, follow, and keep these instructions.2.  Heed all warnings.3.  Only use attachments/accessories specified by the manufacturer.WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Electrical Safety Information1.  Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified may result in improper operation, damage to the equipment or pose a fire hazard if the limitations are not followed.2.  There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service technician.*640-00332-02*640-00332-02
Limited WarrantyUBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation. UBIQUITI NETWORKS’ sole and exclusive obligation and liability under the foregoing warranty shall be for UBIQUITI NETWORKS, at its discretion, to repair or replace any Product that fails to conform to the above warranty during the above warranty period. The expense of removal and reinstallation of any Product is not included in this warranty. The warranty period of any repaired or replaced Product shall not extend beyond its original term. Warranty ConditionsThe above warranty does not apply if the Product:(I)  has been modified and/or altered, or an addition made thereto, except by Ubiquiti Networks, or Ubiquiti Networks’ authorized representatives, or as approved by Ubiquiti Networks in writing;(II)  has been painted, rebranded or physically modified in any way;(III)  has been damaged due to errors or defects in cabling;(IV)  has been subjected to misuse, abuse, negligence, abnormal physical, electromagnetic or electrical stress, including lightning strikes, or accident;(V)  has been damaged or impaired as a result of using third party firmware;(VI)  has no original Ubiquiti MAC label, or is missing any other original Ubiquiti label(s); or(VII)  has not been received by Ubiquiti within 30 days of issuance of the RMA.In addition, the above warranty shall apply only if: the product has been properly installed and used at all times in accordance, and in all material respects, with the applicable Product documentation; all Ethernet cabling runs use CAT5 (or above), and for outdoor installations, shielded Ethernet cabling is used, and for indoor installations, indoor cabling requirements are followed.
ReturnsNo Products will be accepted for replacement or repair without obtaining a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS during the warranty period, and the Products being received at UBIQUITI NETWORKS’ facility freight prepaid in accordance with the RMA process of UBIQUITI NETWORKS. Products returned without an RMA number will not be processed and will be returned freight collect or subject to disposal. Information on the RMA process and obtaining an RMA number can be found at: www.ubnt.com/support/warrantyDisclaimerEXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA, SERVICE, SOFTWARE AND HARDWARE PROVIDERS HEREBY DISCLAIM AND MAKE NO OTHER REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, REPRESENTATIONS, GUARANTEES, OR WARRANTIES OF MERCHANTABILITY, ACCURACY, QUALITY OF SERVICE OR RESULTS, AVAILABILITY, SATISFACTORY QUALITY, LACK OF VIRUSES, QUIET ENJOYMENT, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT AND ANY WARRANTIES ARISING FROM ANY COURSE OF DEALING, USAGE OR TRADE PRACTICE IN CONNECTION WITH SUCH PRODUCTS AND SERVICES. BUYER ACKNOWLEDGES THAT NEITHER UBIQUITI NETWORKS NOR ITS THIRD PARTY PROVIDERS CONTROL BUYER’S EQUIPMENT OR THE TRANSFER OF DATA OVER COMMUNICATIONS FACILITIES, INCLUDING THE INTERNET, AND THAT THE PRODUCTS AND SERVICES MAY BE SUBJECT TO LIMITATIONS, INTERRUPTIONS, DELAYS, CANCELLATIONS AND OTHER PROBLEMS INHERENT IN THE USE OF COMMUNICATIONS FACILITIES. UBIQUITI NETWORKS, ITS AFFILIATES AND ITS AND THEIR THIRD PARTY PROVIDERS ARE NOT RESPONSIBLE FOR ANY INTERRUPTIONS, DELAYS, CANCELLATIONS, DELIVERY FAILURES, DATA LOSS, CONTENT CORRUPTION, PACKET LOSS, OR OTHER DAMAGE RESULTING FROM ANY OF THE FOREGOING. In addition, UBIQUITI NETWORKS does not warrant that the operation of the Products will be error-free or that operation will be uninterrupted. In no event shall UBIQUITI NETWORKS be responsible for damages or claims of any nature or description relating to system performance, including coverage, buyer’s selection of products (including the Products) for buyer’s application and/or failure of products (including the Products) to meet government or regulatory requirements.
Limitation of LiabilityEXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES (INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS), ARISING OUT OF THE USE, INABILITY TO USE, OR THE RESULTS OF USE OF THE PRODUCT, WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER LEGAL THEORY, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NoteSome countries, states and provinces do not allow exclusions of implied warranties or conditions, so the above exclusion may not apply to you. You may have other rights that vary from country to country, state to state, or province to province. Some countries, states and provinces do not allow the exclusion or limitation of liability for incidental or consequential damages, so the above limitation may not apply to you. EXCEPT TO THE EXTENT ALLOWED BY LOCAL LAW, THESE WARRANTY TERMS DO NOT EXCLUDE, RESTRICT OR MODIFY, AND ARE IN ADDITION TO, THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE LICENSE OF ANY SOFTWARE (EMBEDDED IN THE PRODUCT) TO YOU. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to any transactions regarding the sale of the Products.
ComplianceFCCChanges or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.1.  This device may not cause harmful interference, and2.  This device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operations of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.This radio transmitter FCC ID: SWX-ULEDAT has been approved by FCC.ISED CanadaCAN ICES-3(A)/NMB-3(A)This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: 1.  This device may not cause interference, and 2.  This device must accept any interference, including interference that may cause undesired operation of the device.This radio transmitter (IC: 6545A-ULEDAT) has been approved by ISED Canada.CAN ICES-3(A)/NMB-3(A)Le présent appareil est conforme aux CNR d’ISDE Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :1.  l’appareil ne doit pas produire de brouillage;2.  l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.Le présent émetteur radio (IC: 6545A-ULEDAT) a été approuvé par ISDE Canada.
RF Exposure WarningThe antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be located or operating in conjunction with any other antenna or transmitter.Les antennes utilisées pour ce transmetteur doivent être installé en considérant une distance de séparation de toute personnes d’au moins 20cm et ne doivent pas être localisé ou utilisé en conflit avec tout autre antenne ou transmetteur.Australia and New ZealandWarning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.CE MarkingCE marking on this product represents the product is in compliance with all directives that are applicable to it.Country ListAT BE BG CY CZ DE DK EE EL ES FI FR HR HUIE IT LV LT LU MT NL PL PT RO SE SI SK UKBFWA (Broadband Fixed Wireless Access) members noted in blueNote: This device meets Max. TX power limit per ETSI regulations.
RoHS/WEEE Compliance StatementEnglishEuropean Directive 2012/19/EU requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. For more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop where you purchased the product.DeutschDie Europäische Richtlinie 2012/19/EU verlangt, dass technische Ausrüstung, die direkt am Gerät und/oder an der Verpackung mit diesem Symbol versehen ist, nicht zusammen mit unsortiertem Gemeindeabfall entsorgt werden darf. Das Symbol weist darauf hin, dass das Produkt von regulärem Haushaltmüll getrennt entsorgt werden sollte. Es liegt in Ihrer Verantwortung, dieses Gerät und andere elektrische und elektronische Geräte über die dafür zuständigen und von der Regierung oder örtlichen Behörden dazu bestimmten Sammelstellen zu entsorgen. Ordnungsgemäßes Entsorgen und Recyceln trägt dazu bei, potentielle negative Folgen für Umwelt und die menschliche Gesundheit zu vermeiden. Wenn Sie weitere Informationen zur Entsorgung Ihrer Altgeräte benötigen, wenden Sie sich bitte an die örtlichen Behörden oder städtischen Entsorgungsdienste oder an den Händler, bei dem Sie das Produkt erworben haben.
EspañolLa Directiva 2012/19/UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación. Es responsabilidad suya desechar este y cualesquiera otros aparatos eléctricos y electrónicos a través de los puntos de recogida que ponen a su disposición el gobierno y las autoridades locales. Al desechar y reciclar correctamente estos aparatos estará contribuyendo a evitar posibles consecuencias negativas para el medio ambiente y la salud de las personas. Si desea obtener información más detallada sobre la eliminación segura de su aparato usado, consulte a las autoridades locales, al servicio de recogida y eliminación de residuos de su zona o pregunte en la tienda donde adquirió el producto.FrançaisLa directive européenne 2012/19/UE exige que l’équipement sur lequel est apposé ce symbole sur le produit et/ou son emballage ne soit pas jeté avec les autres ordures ménagères. Ce symbole indique que le produit doit être éliminé dans un circuit distinct de celui pour les déchets des ménages. Il est de votre responsabilité de jeter ce matériel ainsi que tout autre matériel électrique ou électronique par les moyens de collecte indiqués par le gouvernement et les pouvoirs publics des collectivités territoriales. L’élimination et le recyclage en bonne et due forme ont pour but de lutter contre l’impact néfaste potentiel de ce type de produits sur l’environnement et la santé publique. Pour plus d’informations sur le mode d’élimination de votre ancien équipement, veuillez prendre contact avec les pouvoirs publics locaux, le service de traitement des déchets, ou l’endroit où vous avez acheté le produit.ItalianoLa direttiva europea 2012/19/UE richiede che le apparecchiature contrassegnate con questo simbolo sul prodotto e/o sull’imballaggio non siano smaltite insieme ai rifiuti urbani non differenziati. Il simbolo indica che questo prodotto non deve essere smaltito insieme ai normali rifiuti domestici. È responsabilità del proprietario smaltire sia questi prodotti sia le altre apparecchiature elettriche ed elettroniche mediante le specifiche strutture di raccolta indicate dal governo o dagli enti pubblici locali. Il corretto smaltimento ed il riciclaggio aiuteranno a prevenire conseguenze potenzialmente negative per l’ambiente e per la salute dell’essere umano. Per ricevere informazioni più dettagliate circa lo smaltimento delle vecchie apparecchiature in Vostro possesso, Vi invitiamo a contattare gli enti pubblici di competenza, il servizio di smaltimento rifiuti o il negozio nel quale avete acquistato il prodotto.
Declaration of Conformityбългарски [Bulgarian]  С настоящото UBIQUITI NETWORKS декларира, че този тип радиосъоръжение ULED-AT е в съответствие с Директива 2014/53/ЕС. Цялостният текст на ЕС декларацията за съответствие може да се намери на следния интернет адрес: www.ubnt.com/complianceHrvatski [Croatian]  UBIQUITI NETWORKS ovime izjavljuje da je radijska oprema tipa ULED-AT u skladu s Direktivom 2014/53/EU. Cjeloviti tekst EU izjave o sukladnosti dostupan je na sljedećoj internetskoj adresi: www.ubnt.com/complianceČeština [Czech]  Tímto UBIQUITI NETWORKS prohlašuje, že typ rádiového zařízení ULED-AT je v souladu se směrnicí 2014/53/EU. Úplné znění EU prohlášení o shodě je k dispozici na této internetové adrese: www.ubnt.com/complianceDansk [Danish]  Hermed erklærer UBIQUITI NETWORKS, at radioudstyrstypen ULED-AT er i overensstemmelse med direktiv 2014/53/EU. EU-overensstemmelseserklæringens fulde tekst kan findes på følgende internetadresse: www.ubnt.com/complianceNederlands [Dutch]  Hierbij verklaar ik, UBIQUITI NETWORKS, dat het type radioapparatuur ULED-AT conform is met Richtlijn 2014/53/EU. De volledige tekst van de EU-conformiteitsverklaring kan worden geraadpleegd op het volgende internetadres: www.ubnt.com/complianceEnglish Hereby, UBIQUITI NETWORKS declares that the radio equipment type ULED-AT is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.ubnt.com/complianceEesti keel [Estonian]  Käesolevaga deklareerib UBIQUITI NETWORKS, et käesolev raadioseadme tüüp ULED-AT vastab direktiivi 2014/53/EL nõuetele. ELi vastavusdeklaratsiooni täielik tekst on kättesaadav järgmisel internetiaadressil: www.ubnt.com/complianceSuomi [Finnish]  UBIQUITI NETWORKS vakuuttaa, että radiolaitetyyppi ULED-AT on direktiivin 2014/53/EU mukainen. EU-vaatimustenmukaisuusvakuutuksen täysimittainen teksti on saatavilla seuraavassa internetosoitteessa: www.ubnt.com/complianceFrançais [French]  Le soussigné, UBIQUITI NETWORKS, déclare que l’équipement radioélectrique du type ULED-AT est conforme à la directive 2014/53/UE. Le texte complet de la déclaration UE de conformité est disponible à l’adresse internet suivante: www.ubnt.com/complianceDeutsch [German]  Hiermit erklärt UBIQUITI NETWORKS, dass der Funkanlagentyp ULED-AT der Richtlinie 2014/53/EU entspricht. Der vollständige Text der EU-Konformitätserklärung ist unter der folgenden Internetadresse verfügbar: www.ubnt.com/complianceΕλληνικά [Greek]  Με την παρούσα ο/η UBIQUITI NETWORKS, δηλώνει ότι ο ραδιοεξοπλισμός ULED-AT πληροί την οδηγία 2014/53/ΕΕ. Το πλήρες κείμενο της δήλωσης συμμόρφωσης ΕΕ διατίθεται στην ακόλουθη ιστοσελίδα στο διαδίκτυο: www.ubnt.com/complianceMagyar [Hungarian]  UBIQUITI NETWORKS igazolja, hogy a ULED-AT típusú rádióberendezés megfelel a 2014/53/EU irányelvnek. Az EU-megfelelőségi nyilatkozat teljes szövege elérhető a következő internetes címen: www.ubnt.com/complianceÍslenska [Icelandic]  Hér með lýsir UBIQUITI NETWORKS yfir því að ULED-AT er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 2014/53/EU. Fullur texti ESB samræmisyfirlýsing er að finna á eftirfarandi netfangi: www.ubnt.com/complianceItaliano [Italian]  Il fabbricante, UBIQUITI NETWORKS, dichiara che il tipo di apparecchiatura radio ULED-AT èconforme alla direttiva 2014/53/UE. Il testo completo della dichiarazione di conformità UE è disponibile al seguente indirizzo Internet: www.ubnt.com/complianceLatvių kalba [Latvian]  Ar šo UBIQUITI NETWORKS deklarē, ka radioiekārta ULED-AT atbilst Direktīvai 2014/53/ES. Pilns ES atbilstības deklarācijas teksts ir pieejams šādā interneta vietnē: www.ubnt.com/complianceLietuvių kalba [Lithuanian]  Aš, UBIQUITI NETWORKS, patvirtinu, kad radijo įrenginių tipas ULED-AT atitinka Direktyvą 2014/53/ES. Visas ES atitikties deklaracijos tekstas prieinamas šiuo interneto adresu: www.ubnt.com/compliance
Malti [Maltese] B’dan, UBIQUITI NETWORKS, niddikjara li dan it-tip ta’ tagħmir tar-radju ULED-AT huwa konformi mad-Direttiva 2014/53/UE. Id-dikjarazzjoni tal-konformità tista’ tiġi kkonsultata minn www.ubnt.com/complianceNorsk [Norwegian] UBIQUITI NETWORKS erklærer herved at utstyret ULED-AT er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 2014/53/EU. Den fulle teksten til EU-samsvarserklæringen er tilgjengelig på følgende internettadresse: www.ubnt.com/compliancePolski [Polish]  UBIQUITI NETWORKS niniejszym oświadcza, że typ urządzenia radiowego ULED-AT jest zgodny z dyrektywą 2014/53/UE. Pełny tekst deklaracji zgodności UE jest dostępny pod następującym adresem internetowym: www.ubnt.com/compliancePortuguês [Portuguese]  O(a) abaixo assinado(a) UBIQUITI NETWORKS declara que o presente tipo de equipamento de rádio ULED-AT está em conformidade com a Diretiva 2014/53/UE. O texto integral da declaração de conformidade está disponível no seguinte endereço de Internet: www.ubnt.com/complianceRomână [Romanian]  Prin prezenta, UBIQUITI NETWORKS declară că tipul de echipamente radio ULED-AT este în conformitate cu Directiva 2014/53/UE.  Textul integral al declarației UE de conformitate este disponibil la următoarea adresă internet: www.ubnt.com/complianceSlovenčina [Slovak] UBIQUITI NETWORKS týmto vyhlasuje, že rádiové zariadenie typu ULED-AT je v súlade so smernicou 2014/53/EÚ. Úplné EÚ vyhlásenie o zhode je k dispozícii na tejto internetovej adrese: www.ubnt.com/complianceSlovenščina [Slovenian] UBIQUITI NETWORKS potrjuje, da je tip radijske opreme ULED-AT skladen z Direktivo 2014/53/EU. Celotno besedilo izjave EU o skladnosti je na voljo na naslednjem spletnem naslovu: www.ubnt.com/complianceEspañol [Spanish]  Por la presente, UBIQUITI NETWORKS declara que el tipo de equipo radioeléctrico ULED-AT es conforme con la Directiva 2014/53/UE. El texto completo de la declaración UE de conformidad está disponible en la dirección Internet siguiente: www.ubnt.com/complianceSvenska [Swedish]  Härmed försäkrar UBIQUITI NETWORKS att denna typ av radioutrustning ULED-AT överensstämmer med direktiv 2014/53/EU. Den fullständiga texten till EU-försäkran om överensstämmelse finns på följande webbadress: www.ubnt.com/compliance
©2016-2017 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, TOUGHCable, and UniFi are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries. All other trademarks are the property of their respective owners. AI110617  Online ResourcesSupport  help.ubnt.comCommunity  community.ubnt.comDownloads  downloads.ubnt.comUbiquiti Networks, Inc.685 Third Avenue, 27th FloorNew York, NY 10017USA  www.ubnt.com

Navigation menu