Uni Art Precise RS992-001R User Manual

Download:
Mirror Download [FCC.gov]
Document ID	5626
Application ID	5MqVJFGUOd8L9XB374sqsA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	26.03kB (325423 bits)
Date Submitted	1998-08-19 00:00:00
Date Available	1998-10-15 00:00:00
Creation Date	1998-08-19 10:24:23
Producing Software	Pixel Translations (PIXPDF Ver.1.35)
Document Lastmod	1998-08-19 10:26:15
Document Title	User Manual
Document Creator	Acrobat 3.0 Import Plug-in

RF 900 MHZ
STEREO WIRELESS
SPEAKER SYSTEM
RSQQO
Owner's Manual
Please read before using this equipment
FCC ID: MVARS992—001R
INTRODUCTION
The 900 MHz stereo wireless speaker system uses latest wireless
technology that enable you to enjoy music and TV sound anywhere
inside or outside your home. You can simply connect the system
to any sound source such as CD. TV NOR, Hi-Fi and radio. Without
complicated wiring and installation with your ~l‘WHi-Fi and rear channel
amplifier, the system enables you to enjoy thrilling, Iifeiike sound stereo
in minutes.
FEATURES
1. 900 MHz RF technology.
2. RF technology lets you roam freely throughout your house.
3. Operating distance up to 50 Meters.
4. No iine—of-sight limitation.
5. Virtually interference free stereo quality.
6. ALC and auto ONIOFF control.
FCC ID: MVARS992-001R
TRANSMITTER
POWER ON! SIGNAL INDlCATOFI
(GREEN}
FHEQ. ADJ UST
WALL MOUNT
HOLE
. Dc INPUT is“?
sv soomA ( 4 POWER!
(9—6—6) TUNING | STANDBY
LED
BATTERY _ NDFIMAUBOOST
noon BASS VOLUME
ow01=s=
CONTROL
FCC ID: MVARS992-001R
INSTALLATION
TRANSMITTER
1. Connect the supplied AC power adaptor to an electrical wall outlet.
2. Plug the AC power adaptor in the DC jack located on the rear
of the transmitter.
3. The rear of the transmitter has one audio cord that can be
connected to audio output jack of TV,TV monitor, VCR, CD, Radio
tape recorder or to headphone/earphone jack with the connector
provided.
The green LED auto ONIOFF indicator will be ON when you plug the
adaptor in the AC source and connect the audio plug to the audio
source. When the auto on indicator is OFF, adjust your audio source
output level which is greater than the auto on indicator light on input
level.
ACIDC
GREEN LED
AU DIO INPUT PLUG
Connect the signal input cord to the audio equipment.
TRANSMITTER
STANDARD RCA CONNECTOR
FCC ID: MVARS992—001R
SPEAKER RECEIVER
1. Insert 4 pcs ‘D' size ALKALINE battery into the battery compartment
with correct polarity at the rear of the speaker or plug the 6V SOOmA
power adaptor (optional) into a wall outletand connect to the DC input
jack on the rear of the speaker.
2. Turn on the voiume control and set to mid level at the front panel of
the speaker. The power! stand-by indicator light up at same time.
When the transmitter turn off, the receiver will auto mute at stand-by
status.
OPERATION
1. Turn on the audio source (TV or audio component) to which the
transmitter is connected.
2. Switch the ONIOFF switch on the speakerto ON.
3. Adjust the volume control to the desired listening level.
4. Adjust the tuning dial of the speaker to the frequency which is
same as transmitter‘s transmission frequency for best reception.
5. Adjust the tuning dial of the transmitter to the frequency of the
speakers for the best reception.
6. a) Keep a distance upto T meters apart from transmiuerwhen making
fine tune adjustment of speakers for best stereo reception.
7 Meters
b) Whenever you find frequency' jam, re-adjust your tuning of
transmitter, and then the speakers to other free location.
..l|IIIlI|I|I||..
FCC ID: MVARS992-00 IR
c) Follow process (a) when making frequency adjustment for best
stereo reception.
Note:
You should now be able to place the speaker freely from room to
room without disruption. If disruption should occur (signal breaks up).
adiust the speaker's tuning control to maximize stereo reception.
If you hear interference from other components, re-adjust the tuning
control of transmitter, and then the speakers to other free location. You
can re-adjust the tuning control by moving it either right or left. You
may have to try a few locations to find one with no interference.
When transmitting! receiving over long distances, the signal from the
system will become weaker and the stereo indicator light will go dim.
For protection of the transmitter and power saying,the transmitter will
be cut off automatically if there is nofweak operation input signal from
audio source for one minute. in the other words, if the signal recalls
back, the transmitter will work again automatically.
FCC ID: MVARS992—001R
TROUBLE
NO SOUND
DISTOFITED
FCC ID: MVARS992—001R
SHOOTING
- Ensure the AC adaptor is fully inserted into
the AC outlet and into the power connection
input on the transmitter.
- Ensure the speaker's ONIOFF switch is in the
ON position.
- Speaker‘s battery may be too low.
- Ensure the TV or audio component is on and
tuned to a channel with audio.
- Adjust the volume control on the speaker to
turn up the volume.
- The connected audiolvideo equipment is not
playing. Start playing the equipment.
- The volume of speaker is turned down, adjust
the voiume to an appropriate ievel.
- Ensure the stereo indicator light is on. If not,
adjust the tuning control on the speakers until the
indicator light is on.
- Change the position of the FREQ. ADJUST
control to change operating frequency. You must
then adjust the tuning control on the speaker
until the stereo indicator lights.
- Speaker‘s batterymay be too low. Replace
with the new battery.
- Ensure the level control wheel is adjusted
properly.
- The speaker is too far from transmitter. move
closer.
- The input level of the audio signal is too low.
Turn up the volume of the audio source
equipment.
SPECIFICATION
Transmission Mode
' Carrier Frequency
Operation Voltage:
Frequency Response :
Distortion
SIN ratio
Separation
Operation distance
UHF stereo:
: 900 MHz
: Transmitter, 19V 200mA
: Speaker, BV (Bx‘D' size Alkaine batteries)
61! BODmA adaptor (optional) ‘
2OHz-15KH2
1.5%
: BOdB
: 30dB
:50M
Warning: Changes or modifications to this unit not expressly
approved by the party responsiblefor compliance could
void the user's authority to operate the equipment.
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2)
this device must accept any interference, including
interference that may cause undesired operation of the
device.
FCC ID: MVAR3992-001R

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Modify Date                     : 1998:08:19 10:26:15
Create Date                     : 1998:08:19 10:24:23
Producer                        : Pixel Translations (PIXPDF Ver.1.35)
Creator                         : Acrobat 3.0 Import Plug-in
Page Count                      : 8

EXIF Metadata provided by EXIF.tools