Uni Art Precise SP4392-001R Wireless Outdoor Lamp Speaker User Manual
Uni-Art Precise Products Ltd Wireless Outdoor Lamp Speaker
user manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1334609 |
| Application ID | sGoqv123eAA4MdwVGn7jSQ== |
| Document Description | user manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 122.92kB (1536532 bits) |
| Date Submitted | 2010-08-29 00:00:00 |
| Date Available | 2010-08-29 00:00:00 |
| Creation Date | 2010-08-18 09:17:33 |
| Producing Software | Adobe Acrobat 7.0 Image Conversion Plug-in |
| Document Lastmod | 2010-08-27 09:12:16 |
| Document Title | user manual |
| Document Creator | Adobe Acrobat 7.0 |
®
c/{coustic
Rocearcbll
DLITDDEIR LANTERN AND
WIRELESS SPEAKER
MEIDEL AWES'I
INSTALLATION AND
OPERATION MANLIAL
|MPEIRT T INFORMATION
C TIO N Caution: To reduce the risk at electric shock, do not remove cover (or pacxl. No user
RISK or ELECTRlC SHOCK. serviceable parts inside. Ralar servicing to qualified Service personnel
DO NOT OPEN.
The nghlnthg llash with arrowhead symbol. with The exclamation point Within an equilateral
Ash equilateral triangle is intended to alert the user triangle is intended to alert the user or the
oI the presence or uninsulated dangerous voltage presence or important operating and maintenance
within the product‘s enclosure that may be oi sullicient (servicing) instructions in the literature accompanying the
aDDIlance.
magnitude to constitute a risk or electric shock to persons.
For power rating and all applicable warning labels. see the helium oi the transmitter and receiver/speaker.
Important Safety Instructions 5 Protect the power cord lrorn heing walked on or pinched
i, Read these lnslruclions. parllcularly at plugs, convenience receptacles, and the
2‘ Keep these “muslin”? point where they exit lrom the apparatus.
1 pm a" wa,,,.,.qs_ 9, Unplug this apparatus during Ilthntng storms or when
4_ renew at. inspumens‘ unused lor long periods or llme.
5. clean only wlth ory cram. lo. neler all servicing to qualified service personnel. servicing
5. Do not block any ventilation openings. install in '5 mull?“ Whe" "19 599mm "35 bee" “mm“ l" W
accordance with the manulaclurer‘s lnstructlons. way. such as pow-supply core or plug is damaged. iioula
7. Do not install hear any heat sources such as radiators. "35 bee" Spilled or oblects have lallerl min the apparatus,
heai registers, stoves, or other apparatus iinciuuiha gs; 355?ngurguhrer‘salfliesregxggiggg'pgamwer does
“my” ”m “we "ea" ll. Only use attachments/accessories speciiied hy the
manulacturer.
Care and Maintenance
~Alwavs use a soil cloth to clean the speaker and
transmitter Never use any product containing alcohol or
other solvents as they may damage the surlace.
-Use caution when plugging the power translormer in an
ac outlet to avoid the risk ol electric shock.
~ To clean the lantern/speaker: Shut oil main power supply.
wloe with damp cloth or use window cleaner. Do not use
abrasive cleaners.
~ Bulb replacement: Replace with MAX Aow type a or
Llslad I3W sell—ballasteg Compact Fluorescent Lamp
icanaelaprapaseo ouihl.
wen-tho: Do nol use oulo-hase adapters with thls product.
This product must he used with canoeiahrahaseo hulhsoniy
Product Information
keep your sales receipt to obtain warranty parts and
service and lor proof oi purchase, Attach it here and
record the serial and model numhers in case you need
them rhese numhers are located on the nroduct.
Model No;
Purchase Date:
Dealer/Address/ Phone:
WARNING: RISK OF INJURY
- some metal parts in the torture may have sharp edges. To prevent cuts and scrapes. wear gloves when hanoiing the parts.
-Acrount lor small parts and destroy packing material, as these may be hazardous to children,
- use llasnllght or alternate light source to light work area during installation.
- Assistance may he required to support fixture dining installation.
- This apparatus must he installed in accordance with all applicable installation rules.
' This device must be connected to a mains socket outlet or outlet box with a grounded and protected connection.
-ro prevent inlury. lhis apparatus must he securely attached to the wall in accordance with the installation instructions.
CAUTION: WIRING AND rlx'runz OPERATION
-connecl rixture to supply wires rated loral least 90°C "94°F).
-Do not use llxture an dimmlng circuits.
- Unit must he mounted higher than at)“.
WARNING
To prevent iniury, this apparatus must be securely attached to the wall in accordance with the installation instructions.
INTREIDUETIEIN
AR's Outdoor Lantern and Wireless Speaker System puts a new twist on your outdoor
lighting: sound! The AWBSl eliminates the hardest part of adding speakers to your
home—running and hiding hundreds of feet of speaker wire. The AR Wireless Speaker
System's RF signal travels with ease through walls. floors. ceilings and other obstacles,
delivering high-quality sound and stylish décor. With drift and statiCrfree reception
along with outstanding range—up to 150 feet*—the possibilities for enjoying your AR
Wireless Speaker System are nearly unlimited. The AR Wireless Speaker System is
compatible with most audio sources, such as TVs. DVD players, VCRs, A/v receivers/
amps, stereos, computers. and portable devices (CD players, cassette players. MP35
etc.).
This manual covers various connection options and detailed operating instructions for
making the AR Wireless Speaker System a valued part of your lifestyle. If. after having
reviewed the instructions. you have any questions. please call toll-free
7-800-732-6866 or visit www.araccessories.com.
*Ranqe may vary according to environment.
SETTING UF'
Unpacking
Before you start installing the Outdoor Lantern and Wireless Speaker, make sure you
have the following parts in your package:
l l
(2) Wire l
Connectors l l
l l (l) transmitter
~\ 7 iiiniiiiiml} (2) Mounting ‘ ,
T llllllrlllllllllllllllll} Screws & who...“ ‘
i M q Lw‘ (2)Caps
eat
“l
(I) Transmitter
Power Adapter
(I) Mounting Crossbar
(l) mini-lack to
RCA adapter
Mounting the Lantern/Wireless Speaker
Before you can use the Outdoor Lantern and Wireless Speaker, you must mount it to
an outlet box.
WARNING: Consult a qualified electrician in casel the main supply wiring needs to be
checked or if you’re not certain how to install wiring. Always install wiring connections
in accordance with local code. ordinances, and the National Electrical Code.
(I) 3.5mm to
ll) Lantern/Wireless Speaker
1. Make sure power Is off for the outlet box at the main
circuit breaker.
2. Remove the old fixture from the outlet box. Carefully
disconnect its wiring.
ill (
r Tell? l 3. Mount the crossbar to the outlet box using the mounting
screws included in this package.
4. Unscrew the center screw on the crossbar and align the
two side screws so that they are level with each othen Then
tighten the center screw.
5. Find the copper ground wire coming from the wireless
speaker Twist it together with the ground wire coming from
the outlet box.
If the outlet box doesn't have a ground wire, attach the
ground wire to the mounting crossbar as shown here
6. Strip 3/ " of insulation from the wire ends coming from
the speaker. Use pliers to twist the speaker's stripped ends
together with the wires coming from the outlet box—make
sure you match black wire to black and white wire to white
Then ship the ends.
7. Attach the wire.l connectors to the joined ends. If you'd like,
you can tie the connectors and ends together with electrical
tape.
8. Place the wireless speaker onto the two side screws on the
crossbar. Secure the speaker onto the wall with the two caps
included in this package.
9. Use silicon caulking to seal the top and sides between
the speaker and the wall. Leave the bottom open so that
moisture can drain.
Connecting the Transmitter to an Audio Source
1. Plug the stereo plugs on the provided Y—adapter
audio cable into the AUDIO IN jacks on the back of
the transmitter (make sure to match the colors on
the plugs and jacks).
2 Plug the minirplug end of the provided Y-adapter
into the headphone output of your MP3 player or CD
player (or audio output jack on your computer).
y-aoapter
i audio cahle
, lLl
Transmitter
(hack panetl
Warning: This product is designed to work with line level outputs or headphone
outputs only. Do NOT connect it directly to speaker outputs as it will permanently
damage the transmittec
3. Connect the small. round plug from the transmitter
AC power adapter to the transmitter’s DC lN jack.
Plug the other end of the transmitter AC power
adapter into any standard 120V AC wall outlet.
rransrmiier (back panel)
izov ac
llei
AC Power
Adapt"
Note: This power unit is intended to be correctly oriented in a vertical or floor
mount position.
Note: There is no transmitter ON/OF F switch. The transmitter is designed to he
left plugged in and powered at all times. if you will not be using the AW851lor an
extended period of time. unplug the transmitter AC power adapter.
Connecting to an A/V Receiver
You can also connect the transmitter to an A/V Receiver using the mini-jack to
RCA adapter included.
1. Plug the stereo plugs on the provided Y-adapter audio cable into the AUDIO
lN jacks on the back of the transmitter (make sure to match the colors on the
plugs and jacks).
2. Plug the mini-plug end of the provided
Y-adapter into the mini-jack to RCA adapter.
3. Connect the stereo plugs on the mini-jack to
RCA adapter to the corresponding left and
right audio outputs of your A/V receiver,
amp, or other audio source.
transmitter
lnth paneil AN necriver
nircx lo
a: meat"
Installing/Changing the Lantern Light Bulb
The Outdoor Lantern and Wireless Speaker takes a candelabra-base bulb (40W max;
bulb not included). The bottom of this Outdoor Lantern and Wireless Speaker is open
for easy access to the socket. For best results. use a clear (nonrfrosted) 40W bulb. To
install or change the lantern's bulb:
near-r
eucio nhll
1. Find the light socket located on the bottom of
the lantern.
Bottom of the Lantern
2. Insert the bulb and screw it into the socket.
Important: Handle and dispose of fluorescent
bulbs per manufacturer’s directions.
Light socket
TEILIR F THE SPEAKER 5
TEM
Lantern/Speaker
Right Panel Speaker Controls
Speaker on/Off button turns the speaker on and off
Auto Scan button rescans for the transmitter's signal
Volume Up and Down buttons adjust the volume level
L/Mono/R switch determines if the speaker plays sound in mono
as a standalone speaker, or plays the left or right track in a
stereo pair with an additional AW851
Light On/Off switch turns the lantern on and off
Front Panel
Power/Linked indicator (not shown) blinks when the speaker is
first powered on; it turns solid blue when the speaker is tuned to
the transmitter
Right Side, Back
Transmitter
Top panel
SIGNAL indicator lights green when the audio is
present and the transmitter is broadcasting
POWER indicator lights when the transmitter is on
CHANNEL 1 2 3 lets you find the best
transmission frequency for your environment
DC IN jack receives the small round end of the
included 12V 200mA AC power adapter
AUDIO IN (R / L) connects to your sound source
using one of the connection options shown on
the next pages
/lwa
mp\
T I
Back panel
PAIRINE THE SPEAKER Ei
TEM
Adjusting the Transmitter
1. Turn on your audio source (for example. A/V receiver. MP3 player, stereo, etc.) and
play music at a normal listening volume.
[ 2. Set the channel select switch on the back of the
Channel ‘ l transmitter to one of the transmitter's three broadcast
”It?“ i frequencies: 1. 2 or 3. If you experience poor reception
switch ‘l l
l—I
or interference, try choosing a different frequency by
moving the channel select switch to another position.
When the transmitter is receiving an audio signal and is
ready. the SIGNAL indicator turns solid green.
Note
If the SIGNAL indicator on the transmitter does not turn on. please check the
following:
- Confirm the transmitter AC power adapter is securely connected.
- Confirm the cable from the transmitter is securely connected to the audio source
output (MP3 player, A/V receiver, etc.).
- Confirm the audio source is playing audio and is turned up.
Tuning the Speaker
1. Press the Speaker On/Off button on the right side of the speaker
to turn it on. The indicator light on the front of the speaker blinks
while the speaker is tuning to the transmitter. The indicator light
turns solid blue when the speaker is tuned to the transmitter-you
should hear sound coming from the speaker now.
Note: If the speaker is on a switched outlet, make sure the outlet is
on.
Note: If the speaker is not tuned or if the transmitter is not
connected properly. the indicator light will continue blinking. if this
occurs, please see the troubleshooting section of this manual.
2. Adjust the volume on the speaker as desired.
3. Set up the speaker for mono or stereo operation using the switch on the right side
of the AW851 speaker.
a) Monaural operation: The monaural mode (mono) is recommended when using a
single AW851 by itself. For monaural operation. set the L/M/R switch to "M" on
the speaker.
b) Stereo operation: You need an additional AW851 speaker for the stereo option.
Set the L/Mono/R switch to "I." on the speaker located to the left from the
listener. and set the other speaker to the "R" position.
Notes:
A single AW851 transmitter can send its signal to more than two speakers. All you need
to do is tune the speakers to the single transmitter.
The speaker automatically retunes if it loses the transmitter’s signal. You can also press
the Auto Scan button on the bottom of the speaker to retune the speaker at any time.
The transmitter turns off automatically if there is no audio signal present for a prolonged
period.
Interference in the form of static and/or distortion can sometimes be heard. If this
occurs, confirm the transmitter/speaker adjustments and indicators. If the problem
persists, refer to the Troubleshooting section of this manual.
TURNING THE SPEAKER OFF
1. Press Speaker On/Off button on the bottom of the speaker to turn the speaker off.
2. Confirm that the speaker is off by verifying that the indicator light on the speaker’s
front panel is no longer illuminated.
TURNIN THE LAMP UN AND EIF'F'
To turn the lamp on: Put the Light On/Off switch on the bottom of the speaker in the
on position. If the lamp is on a switched outlet. make sure the outlet is on.
To turn the lamp 0": Put the Light On/Off switch on the bottom of the speaker in the
off position.
MDRE HELPFUL INFDRMATIDN
About Fixed-Level Audio Outputs
A fixed-level, or line-level. audio output is considered ideal since it provides an audio
signal unchanged by adjustments to the audio source volume control.
Hlnt: F ixed-level audio outputs from stereo receivers/amps will typically be
designated as Tape for Record) outputs or DVR/DVD-R audio output connections.
Fixed-level outputs from TVs are usually marked as ’Constant.' ‘Fixed.’ or ‘Select.’ If they
are not marked as such. they are probably variable outputs (see “About Variable-Level
Audio Outputs" below). Outputs from DVD players are almost always fixed.
Hlnt: When connecting to the audio outputs of a DVD player, remember that the DVD
player must be showing a TV channel for sound to be produced.
About Variable-Level Audlo Outputs:
A variable-level output, such as a headphone jack or certain RCA-type outputs,
provides an audio signal that changes with the volume level set on the audio source.
As the volume of the audio source is adjusted up and down. so is the audio signal
strength sent to the transmitter. This can affect the quality of sound generated by the
speaker. and may require an adjustment of the volume level of the audio source to
produce a signal strong enough for the transmitter.
Hlnt: On most bookshelf-type or compact stereo systems, inserting a headphone
plug into the headphone jack results in automatic cutoff of the regular. or hard-wired
speakers.
Hlnt: Most TVs, regardless of age or price, have variable outputs. If you are unsure
which of your TV audio outputs is fixed. refer to the TV instruction manual. Some
TVs have outputs that can switch between variable and fixed. When given a choice.
fixed is always recommended.
GUBLEE BEITIN
The following troubleshooting guide takes you through some of the more common
problems associated with the installation and/or operation of a wireless system. if the
problem persists. please call toll-free at l~aoo-732-osoo or visit www.araccessories.com.
Issue: Cause and solution:
No sound - Check that the transmitter AC power adapter ls fully inserted into the wall outlet and
the power cord from the AC adapter is firmly connected to the transmitter power
input jack.
- Confirm that the speaker is turned on and tuned to the transmitter—
the indicator light on the front of the speaker should be solid blue (not blinking).
' lithe speaker is on a switched outlet. make sure the outlet is on.
- Check that the audio source component (stereo. MP3 player. etc.) is turned on and
transmitting sound as it normally should.
' Make sure the volume on your audio source is turned up.
- Check that the speaker volume is turned up.
- If you are using a Tape 2 Monitor output from your receiver/amp as the audio
output. check that you have pressed the Tape Monitor/Tape 2 button on the Iront ol
the receiver. This will turn on the Tape 2 outputs. which may not have been active.
No sound/ - Check that the speaker's indicator light is solid blue (not blinking).
24533?th - Change the position of the channel select switch (I, 2 or 3) to change the operating
frequency. Then press the Auto Scan button on the bottom of the speaker to make
the speaker retune.
' Change the location of the transmitter. Place it as high and away from obstructions
as possible. Avoid placing the transmitter directly on top of or behind a TV.
' Move the transmitter closer to the speaker. Sending the signal through certain
materials. such as glass. tile. and metal. can decrease the effective transmitting
distance of the system.
Bulb doesn't ' If the lantern/speaker is on a Switched outlet. make Sure the outlet is on.
"9” - Make sure the light on/off switch on the bottom of the lantern/speaker is switched
on.
' Make sure the bulb hasn't burned out. Try a new bulb in the lantern/Speaker.
' If the above solutions don‘t work, turn off power to the outlet at the circuit box and
make sure the lantern/speaker is wired correctly.
Circuit breaker - The lantern/speaker is probably wired incorrectly. Turn off power to the outlet at the
trips when you circuit box and rewire the lantern/speaker. making sure to match the black to black
turn on the wire. white to white, and ground to ground.
lantern
SPEEIFIEATIDNS
Transmitter Speaker
' Omnidirectional QOOMHZ broadcast Push-button. auto-lock tuning
- Eflective transmitting range: ~ 2-way acoustic design:
up to 150 ft. (45m)" 2” tweeter. 3" woofer
- Phaserlocked loop circuitry (PLL) - 5 Watt RMS internal amplifier
~ Automatic level control (ALC) ' Omni-directional Sound
' 3 selectable broadcast frequencies ~ Frequency response: 4CIHZ -15kHZ
' Stereo audio input ' Lelt/Mono/Right switch
- operates using Ac outlel pox (requires
Maximum range; results may vary according to installation)
environment.
FEE / IE
FCC Statement
INFEIRMATIEIN
rcc Regulations state that unauthorized changes or modifications to this equipment may vold the user‘s authority
to operate ii.
Industry Canada Regulatory Information
Operatlon is subject to the following two conditlons:(1l this device may not cause harmful interference and (2)
this device must accept any interference received. including interference that may Cause undesired operation.
The user is cautioned that this device should be used only as specified Within this manual to meet RF exposure
requirements. Use of this device in a manner inconsistent with this manual could lead to excessive RF exposure
conditions.
12 M NTH LIMITED WARRA TY
Audiovox Electronics Corporation (the “Company”) warrants to the original retail
purchaser of this product that should this product or any part thereof. under normal
use and conditions. be proven defective in material or workmanship within 12 months
from the date of original purchase, such defect(s) will be repaired or replaced (at
the Company's option) without charge for parts and repair labor. To obtain repair or
replacement within the terms of this Warranty. the product along with any accessories
included in the original packaging is to be delivered with proof of warranty coverage
(eg. dated bill of sale), specification of defect(s). transportation prepaid. to the
Company at the address shown below. Do not return this product to the Retailer
This Warranty is not transferable and does not cover product purchased. serviced
or used outside the United States or Canada. The warranty does not extend to
the elimination of externally generated static or noise, to costs incurred for the
installation. removal or reinstallation of the product.
The warranty does not apply to any product or part thereof which, in the opinion of
the company. has suffered or been damaged through alteration. improper installation.
mishandling, misuse, neglect, accident or exposure to moisture. This warranty does
not apply to damage caused by an AC adapter not provided with the product, or by
leaving non-rechargeable batteries in the product while plugged into an AC outlet.
THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO
THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND. IN NO EVENT, SHALL THE
COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR
THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED
WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO DURATION OF THIS
WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER, INCLUDING
ANY IMPLIED WARRANTY, MUST BE BROUGHT WITHIN A PERIOD OF 24 MONTHS
FROM THE DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE
LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER. No
person or representative is authorized to assume for the Company any liability other
than expressed herein in connection with the sale of this product.
Some states/provinces do not allow limitations on how long an implied warranty lasts
or the exclusion or limitation of incidental or consequential damage so the above
limitations or exclusions may not apply to you. This Warranty gives you specific legal
rights and you may also have other rights which vary from state/province to state/
provmce
U.S.A.:Audiovox Electronics Corp., 150 Marcus Blvd, Hauppauge. New York 11788
CANADA: Audiovox Return Center. c/o Genco, 6685 Kennedy Road. Unit 33 Door 16,
Mississauga Ontario L5T 3A5
rrademarkls) ® Registered wwwaraccessoriescom MADE iN CHINA most US ID no
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Page Count : 2 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:c6e13515-4be7-4e3e-887c-19c113863de3 Producer : Adobe Acrobat 7.0 Image Conversion Plug-in Modify Date : 2010:08:27 09:12:16+08:00 Create Date : 2010:08:18 09:17:33+08:00 Metadata Date : 2010:08:27 09:12:16+08:00 Creator Tool : Adobe Acrobat 7.0 Document ID : uuid:50e7cd4a-63f0-41f2-86a4-ddb3516a6782 Instance ID : uuid:cc9acb68-6a17-4d47-9c76-a56fa0dee564 Format : application/pdf Creator : Adobe Acrobat 7.0EXIF Metadata provided by EXIF.tools