Uni rich Technology BTSPEAKER LANTERN SPEAKER User Manual URBT 1033 Stone Speaker Instr

Download:
Mirror Download [FCC.gov]
Document ID	2937580
Application ID	DDyT4lyPbfvHoQQzilwc+Q==
Document Description	15_URBT-1081 UserMan.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.45kB (80615 bits)
Date Submitted	2016-03-22 00:00:00
Date Available	2016-03-22 00:00:00
Creation Date	2014-08-13 00:37:21
Producing Software	Acrobat Distiller 10.1.10 (Windows)
Document Lastmod	2014-08-13 00:37:21
Document Title	URBT-1033 Stone Speaker Instr...
Document Creator	PScript5.dll Version 5.2.2
Document Author:	hayeschau

URBT-1081
Lantern Speaker Instruction Manual
1) Play/Pause
Receiving call Button
2. Bluetooth indicator light
3) On/Off Button
4. Micro-B USB charging port
(DC IN)
5. Charging indicator light
Thank you for choosing our product. We hope you will enjoy using the appliance.
Please read the following chapters carefully so that you can become acquainted
with the advantage of this product and its use.
Overview of the components
1. Accept call / End call / Calling last number / Play / Pause
2. Bluetooth indicator light
3. On / Off Button
4. Micro-B USB charging port ( DC IN )
5. Charging indicator light
player). For this, please refer to the operation manual of your player.
2. Select the searching mode on your Bluetooth device (refer to your Bluetooth
device’s owner’s manual for details if necessary.)
3. Turn on the power of Garden Speaker by briefly pressing the On/Off button. The
indicator blue light will start to flash rapidly after a short time. The Garden Speaker
is now set to the pairing mode.
4. Your Bluetooth device should find and display “Garden Speaker” as a selection,
select it and, if prompted, use “0000" as a pin for pairing code, depending on the
device manufacturers, model, and software version.
5. Verify that you are connected to the speaker. The Bluetooth LED on the Garden
Speaker will change to a solid blue and you can hear a signal when pairing is
complete.
Charging the intergrated battery
Speaker operation
The device is operated via the integrated lithium polymer battery. Charge the
battery as follow :1. Plug the micro B USB plug of the charging cable into the USB charging port of
the device.
2. Connect the USB connector to the USB port of computer or charging adapter
(not included).
3) While charging, the charging level LED indicator will remain illuminated RED .
4) When charging is complete, the charging level LED indicator will turn solid
GREEN.
5) Make sure that the USB socket at the port of computer or charging adapter has
a maximum output of 5V DC , 500mAh only.
6) The charging time varies according to battery use.
The device is equipped with multi functional buttons. For different functions press
the respective button briefly or press and hold.
Pairing Bluetooth device
Bluetooth involves a technology for wireless radio connection of devices over a
short distance. Devices with Bluetooth standard are transmitting between 2.402
and 2.480 Ghz in ISM band. Iterference can however be caused by WLAN s,
networks, wireless telephones, or microwaves ovens, for example, which operate
in the same frequency band.
The device offers you the possibility to use a Bluetooth-enabled device. The
functional radius is limited to approx. 15 meters depending on the surroundings
and the unit used.
If your playing device supports the A2 DP profile (Advanced Audio Distribution
Profile) and has a music-player function, then you can also wirelessly transfer
music to the device. The A2 DP profile involves a multi-vendor Bluetooth profile. By
streaming, stereo audio signals are wirelessly transferred between the playing
device (source) and the receiving device. To be able to operate the source by
remote control, the player needs to support the AVRCP profile (Audio Video
Remote Control Profile)
Due to different device manufacturers, models, and software versions, a full
functionality cannot be guaranteed.
Logging on devices (Pairing)
Before you listen to music via the unit, you must pair the devices.
1) Ensure, that the Bluetooth function is activated in your player (Mobile or music
On/Off Button
1) Turn on the “Garden Speaker” by pressing the On/Off Button. The Bluetooth
indicator light will start to blink.
2) Hold and press the “On/Off” Button for 3 seconds to turn off the Garden Speaker
until your hear descending beep tones and blue LED indicates blink off. The units
are disconnected.
Play/Pause
1) Briefly press the Play/Pause button to pause playback
2) Press the button again to continue playback
Notes : Depending on the device manufacturers, models, and software versions
you need to start the music playback in your player.
Accepting/Ending call
1) Press the Play/Pause button, to accept an incoming call.
2) To end the call, press the Play/Pause button again
3) During an incoming phone call, the music playback will stop. After ending the
phone call, the track will continue to play.
Calling the last dialed number
1) Press and hold the Play/Pause Button for 3 seconds. The number you called
last with your mobile phone will be called. To end the conversation, press the
Play/Pause button again.
2) Your mobile phone must support this function.
Adjust Volume
1) To adust the volume, you must use the external audio device.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : hayeschau
Create Date                     : 2014:08:13 00:37:21+08:00
Modify Date                     : 2014:08:13 00:37:21+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 10.1.10 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : URBT-1033 Stone Speaker Instr...
Creator                         : hayeschau
Document ID                     : uuid:ebc27ed9-e376-42b4-a474-c82910e2c076
Instance ID                     : uuid:073b1689-8b97-4327-98b2-84064af4a3e4
Page Count                      : 3

EXIF Metadata provided by EXIF.tools