Unichain Technology WM289 Cordless Optical Mouse User Manual USER Manual 01x

SHENZHEN UNICHAIN TECHNOLOGY CO., LTD Cordless Optical Mouse USER Manual 01x

User Manual

Download: Unichain Technology WM289 Cordless Optical Mouse User Manual USER Manual 01x
Mirror Download [FCC.gov]Unichain Technology WM289 Cordless Optical Mouse User Manual USER Manual 01x
Document ID3805920
Application IDMTmVO4AIfDa3Xsf/0XftkQ==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize6.79kB (84875 bits)
Date Submitted2018-04-04 00:00:00
Date Available2018-04-04 00:00:00
Creation Date2018-03-29 15:14:19
Producing SoftwareAcrobat Distiller 11.0 (Windows)
Document Lastmod2018-04-03 16:11:29
Document TitleMicrosoft Word - USER?Manual_01.docx
Document CreatorPScript5.dll Version 5.2.2
Document Author: toby858

TM194G User Manual
VER: 0.1
USER MANUAL
Model NAME : Cordless Optical Mouse
MODEL NO.
WM289
VERSION
0.1
DATE
: 2018.3.2
Page 1 of 7
TM194G User Manual
VER: 0.1
Version.
Revised Date
PIC
Remark
0.1
2/3/2018
Bob
Preliminary
Page 2 of 7
TM194G User Manual
VER: 0.1
Electrical Specification
1. Operating Voltage
Mouse supply voltage: 3V (2AA battery)
2. Current Consumption
Current use :< 10mA
3. Sleep Mode
3.1 Electrical Current: <1mA;
3.2 Wake Up: Press any button
4. Mouse Pointer Performance
4.1 Resolution:800/1200 (default) /1600 /2000/2400/4800DPI
4.2 Speed: 25inches/sec (Max)
4.3 Acceleration:8G
5. LED Indicating Functions
When the battery power is low (battery voltage reduce to <2.1V) the LED will
glisten at the frequency of 1Hz
6. Wireless specifications
2.408-2.474GHz frequency coverage.
GFSK RF transceiver
High Speed RF link data rate Max. 1M bit/s
Page 3 of 7
TM194G User Manual
VER: 0.1
Button Functions
1. Left Button: Mouse left button standard function
2. Right Button: Mouse right button standard function
3. Middle Button: Mouse middle button standard function
4. Wheel: Mouse scroll wheel standard function
5.
4 Button: IE Forward function
6.
5 Button: IE Back function
7. DPI Button: DPI regulate function
Page 4 of 7
TM194G User Manual
VER: 0.1
Operation Process
Step 1
Open the battery cover which in the back of the Mouse.
Insert 2AAA battery which is environment-friendly and safety
Close the battery cover.
Step 2
Place the mouse on a desk or other plane surface. The surface material isn’t metal is better
for wireless distance.
Step 3
Insert a Transceiver in a USB port of PC. The Transceiver is pairing with the mouse.
Step 4
Use the mouse freely.
Page 5 of 7
TM194G User Manual
VER: 0.1
Caution
Please use the Mouse in human house only and keep away water.
Don’t to fixate the light at the mouse bottom.
Children use the mouse with guardian together is necessary.
Keep dry. Humidity, liquids, contain minerals that will corrode
electronic circuits.
Don’t use or store in dusty, dirty areas.
Don’t store in hot areas. High temperature can shorten the life of electronic devices
and warp or melt certain plastics.
Don’t store in very cold areas. Moisture can form inside the case, which may damage
electronic circuit boards.
Don’t attempt to open the case. Non-expert handling of the device may damage the
system.
Avoid dropping and strong impact.
Page 6 of 7
TM194G User Manual
VER: 0.1
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Page 7 of 7

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : toby858
Create Date                     : 2018:03:29 15:14:19+08:00
Modify Date                     : 2018:04:03 16:11:29+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Title                           : Microsoft Word - USER?Manual_01.docx
Creator                         : toby858
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2018:04:03 16:11:29+08:00
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:ad778cf6-c914-4696-94f1-df03debb5af3
Instance ID                     : uuid:6b0a5d7f-3695-4666-8f35-3273bcbf46a1
Page Count                      : 7
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AK8Q-WM289

Navigation menu