Uniden America APPCAM50HD Network Camera User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4088428
Application ID	cIoKLwhf4DvO0VUGCf52zQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	231.67kB (2895859 bits)
Date Submitted	2018-11-29 00:00:00
Date Available	2018-11-29 00:00:00
Creation Date	2018-11-15 14:52:08
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2018-11-15 14:52:15
Document Title	Users Manual
Document Creator	Adobe InDesign CC 13.1 (Macintosh)

AppCam 50HD
3MP Wi-Fi Camera
User Manual
Uniden Security Cloud
3MP
Resolution
180° Field
of View
Two-way
Audio
Cloud
Ready
Night
Vision
Remote
Viewing
Welcome to a simpler, smarter
way to protect your home.
The Uniden AppCam 50HD is a
versatile WiFi camera that can be
used with Uniden Security Cloud.
To use the AppCam 50 HD without cloud storage,
see the Uniden One Setup Guide.
Appearance
Name
Description
Power Input
Micro USB interface for the power supply (5V).
Plug the power cable into the power input
interface to power on the camera.
Microphone
Power Input
Lens
RESET/WPS
Speaker
Status
Indicator
Status Indicator
• Steady red: The camera is starting up.
• Flashing blue: The camera is started,
		 and is ready for Wi-Fi set-up.
• Steady blue: Wi-Fi configuration is completed
		 and the camera is running properly.
• Flashing red: network
		 communication is abnormal.
Memory Card Slot For microSD card.
RESET/ WPS
RESET: Hold down
the button for
10 seconds
when the camera
is starting up
or rebooting.
Memory
Card Slot
Installation
1. Install the camera.
The camera supports table mounting, wall mounting and
ceiling mounting.
2. Power the camera
Plug the camera into the microUSB power cord.
- After approximately 20 seconds the camera will say “Hello”
- After approximately 45 seconds the camera will say “Your device
is ready for network connection, please add your device to the
mobile client to complete configuration.”
Uniden Security Cloud Installation
Download the Uniden Cloud App
• Plug the micro USB power cord into your
AppCam 50HD and plug into wall socket.
• Download the Uniden Cloud app from with
the Apple Store or Google Play. Open the
app and “Sign In” to your Uniden Cloud
account. If you don’t have a Uniden Cloud
account, click “Sign Up”.
Uniden Cloud
App
Connect with
other Uniden
Cloud products.
Cloud
subscription.
5. W
1. Click “Sign Up”
2. Fill in your information
3. Click “Add Cameras” and
give your camera a name
IM
50
If
SS
“b
To
ha
Co
6. N
If
7. E
[V
4. Scan Camera QR Code
Scan the camera’s QR code located either on
the camera or on camera identifier leaflet.
Important! Keep these QR codes in a safe place
for future use.
5. WiFi Setup
Enter your Wi-Fi name and password
Click “Next” to generate a Wi-Fi Connection
Code
Band Steering Information
IMPORTANT: Ensure your phone is connected to the 2.4Ghz WiFi signal of your router. The AppCam
50HD will not connect to a 5Ghz signal.
If you have a single modem/router from your internet service provider and you only have 1 WiFi
SSID (name of your WiFi you connect to) you might have a feature in your router turned on called
“band steering”.
To connect the AppCam 50HD and other 2.4Ghz devices you will need to disable this feature and
have separate 2.4Ghz and 5Ghz WiFi SSIDs.
Contact your ISP for assistance if the AppCam 50HD does not connect to your single WiFi SSID.
6. Next, hold your phone with the WiFi
Connection Code about 3-8" from the camera.
You will hear a “beep” if successfully scanned.
If no message is heard within 10 seconds,
click back and ensure your WiFi settings are
correct.
After the beep, wait about ~ 30 seconds
until the status indicator is SOLID BLUE and
you hear the message “Network connected
successfully.”
7. Enter the camera user name and
password
Username = admin
Password = admin
[Verification Code on back of camera]
Example: adminABCDEF
8. Next update any
settings you want.
Scroll down &
click “Finish”.
9. Access the live
view by pressing
the “Live” button.
Live View Application
Congratulations! Your camera is now set up. Navigate the Live View
to see all your camera features.
Settings
App Tutorial
Time Scale
Camera View
Calendar
Events
Live View
Logi
Pinc
your
ew
Login to the Uniden Cloud app
Pinch‘n Zoom to change the orientation of the cameras connected to
your cloud security.
Pinch
Zoom
Events
Ready for the Ultimate Security?
30
Uniden offers Cloud Lite and Cloud Premium plans to fit your
need and your budget.
SUBS
Log on to your Uniden Security Cloud Account at
www.unidencloud.com with same username and password.
Each camera is given a
FREE 30-day Cloud Lite
Storage Plan. (7-day storage).*
In your Uniden Cloud account, click your username in the upper
right corner and choose UPGRADE.
Choose your plan and continue to the payment processing.
The Un
motion
will pro
your a
uniden
The Fre
enrolle
AUTO
Once y
you ca
Cloud a
curren
Pro-ra
For ful
Reg
FCC In
Please
could v
FCC C
This eq
to part
interfe
energy
to radi
installa
FCC S
This eq
to part
interfe
energy
to radi
installa
determ
one or
• Reori
• Incre
• Conn
Go to the order form. Click REVIEW ORDER - Enter credit card
information and place order.
• Cons
FCC R
This de
compli
provid
distanc
er
30-Day Free Trial of Cloud Lite Storage Plan
SUBSCRIPTION REQUIRED
The Uniden surveillance camera you have purchased contains built-in software that detects and streams
motion and/or sound. Use of your new Uniden camera requires a subscription to Uniden Cloud. Uniden
will provide you with a Free 30-Day Trial Subscription to Uniden Cloud for each camera included within
your account. To enroll in the Free 30-day Trial Subscription, you will need to set up an account here www.
unidencloud.com and provide billing information for monthly renewals.
The Free 30-day Uniden Cloud subscription is based on a 7-day Lite Cloud (motion only) subscription plan per
enrolled camera.
AUTOMATIC MONTHLY RENEWALS
Once your Free 30-day Trial Subscription ends, your subscription will automatically be renewed monthly until
you cancel your subscription. You may cancel your subscription at any time by logging on to your Uniden
Cloud account and cancelling your subscription. Your subscription will not terminate until the end of the
current monthly billing cycle.
Pro-rated refunds will not be given.
For full Terms and Conditions details visit www.unidencloud.com/uniden-terms.
Regulatory Information
FCC Information
Please note that changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
FCC Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also
complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with
any other antenna or transmitter. End-users and installers must be provided with antenna installation
instructions and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. T his device must accept any interference received, including interference that may cause
undesired operation
IC Regulations
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type
and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
Symbol Conventions
IMPORTANT Provides additional information to emphasize or supplement important points of the
main text.
WARNING Indicates a potentially hazardous situation, which if not avoided, could result in equipment
damage, data loss, performance degradation, or unexpected results. Safety Instructions
Safety Instructions
These instructions are intended to ensure that a user can use the product correctly to avoid danger or
property loss.
Proper configuration of all passwords and other security settings is the responsibility of the installer
and/or end-user.
• In the use of the product, you must be in strict compliance with the electrical safety regulations of your area.
• Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire hazard.
• Please make sure that the plug is firmly connected to the power socket. When the product is mounted on
wall or ceiling, the device shall be firmly fixed.
WARNING
• Make sure the power supply voltage is correct before using the camera.
• Do not drop the camera or subject it to physical shock.
• Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth with a bit of ethanol
and wipe it gently. If the camera will not be used for an extended period, replace the lens cap to protect the
sensor from dirt.
• Do not aim the camera at the sun or extra bright places. Blooming or smearing may occur, and affect the
sensor’s endurance at the same time.
• The sensor may be burned out by a laser beam, so when any laser equipment is in use, make sure that the
surface of sensor will not be exposed to the laser beam.
• Do not place the camera in extremely hot, cold (the operating temperature shall be -10°C to +40°C), dusty,
or damp locations, and do not expose it to high electromagnetic radiation.
• To avoid heat accumulation, ensure that there is good ventilation to the device.
• Keep the camera away from liquids.
• If the product does not work properly, please contact your retailer or Uniden customer service.
• Never attempt to disassemble the camera yourself. (We shall not assume any responsibility for problems
caused by unauthorized repair or maintenance.)
Copyri
10
y
the
Uniden CorporationLimited 1 Year Warranty
IMPORTANT: Keep your receipt. Proof of original purchase is required for warranty service.
WARRANTOR: Uniden America Corporation (“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants, for one
year, to the original retail owner, this Uniden Product to be free from defects in materials & craftsmanship
with only the limitations or exclusions set out below. Uniden only warrants the Products contained in the
original factory packaging.
WARRANTY DURATION: This warranty to the original user shall terminate & be of no further effect
12 months after the date of original retail sale. The warranty is invalid if the Product is (A) damaged or
not maintained as reasonable or necessary, (B) modified, altered, or used as part of any conversion kits,
subassemblies, or any configurations not sold by Uniden, (C) improperly installed, (D) serviced or repaired
by someone other than an authorized Uniden service center for a defect or malfunction covered by this
warranty, (E) used in any conjunction with equipment or parts or as part of any system not manufactured by
Uniden, or (F) installed or programmed by anyone other than as detailed by the owner’s manual for
this product.
STATEMENT OF REMEDY: In the event that the product does not conform to this warranty at any time
while this warranty is in effect, warrantor will either, at its option, repair or replace the defective unit &
return it to you without charge for parts, service, or any other cost (except shipping & handling) incurred by
warrantor or its representatives in connection with the performance of this warranty. Warrantor, at its option,
may replace the unit with a new or refurbished unit. Warrantor is not responsible for any additional costs
associated with reinstallation of product.
pment
THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE & ENTIRE WARRANTY PERTAINING TO THE PRODUCT
AND THE CONTENTS CONTAINED IN THE ORIGINAL FACTORY PACKAGING & IS IN LIEU OF & EXCLUDES ALL OTHER
WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW,
INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES TO THE PRODUCT CAUSED BY IMPROPER INSTALLATION OF THE PRODUCT.
THIS WARRANTY DOES NOT COVER ANY COSTS RELATING TO THE REMOVAL, REPLACEMENT, OR INSTALLATION OF
ANY PRODUCT.
ea.
azard.
on
Some states do not allow this exclusion or limitation of incidental or consequential damages so the above
limitation or exclusion may not apply to you.
nol
ect the
the
t the
LEGAL REMEDIES: This warranty gives you specific legal rights, & you may also have other rights which
vary from state to state. This warranty is void outside the United States of America & Canada.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the instructions
in the owner’s manual you are certain that the Product is defective, pack the Product carefully (preferably
in its original packaging). The Product should include all parts & accessories originally packaged with the
Product. Include evidence of original purchase & a note describing the defect that has caused you to return it.
The Product should be shipped freight prepaid, by traceable means, to warrantor at:
Uniden America Service
c/o Saddle Creek
743 Henrietta Creek Rd., Suite 100
Roanoke, TX 76262
usty,
ems
Copyright ©2018 Uniden America Corporation, Irving Texas. ALL RIGHTS RESERVED.
11
AppCam 50HD
3MP Wi-Fi Camera
User Manual - Uniden Security Cloud
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) this device may not cause interference, and
(2) t his device must accept any interference, including interference that may cause undesired operation
of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radioexempts de
licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type
and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peut fonctionner avec une
antenne d’un type et d’un gain maximal (ou inférieur) approuvé pour l’émetteur par Industrie Canada. Dans
le but de réduire les risques de brouillage radioélectrique à l’intention des autres utilisateurs, il faut choisir le
type d’antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas
l’intensité nécessaire à l’établissement d’une communication satisfaisante.
This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm between the
radiator & your body.
Ce matériel est conforme aux limites de dose d’exposition aux rayonnements, FCC / CNR-102 énoncée dans un
autre environnement.cette eqipment devrait être installé et exploité avec distance minimale de 20 entre le
radiateur et votre corps.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) this device may not cause interference, and
(2) t his device must accept any interference, including interference that may cause undesired operation
of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radioexempts de
licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
unidencloud.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Language                        : en-US
XMP Toolkit                     : Adobe XMP Core 5.6-c143 79.161424, 2017/09/22-11:52:47
Create Date                     : 2018:11:15 14:52:08-06:00
Metadata Date                   : 2018:11:15 14:52:15-06:00
Modify Date                     : 2018:11:15 14:52:15-06:00
Creator Tool                    : Adobe InDesign CC 13.1 (Macintosh)
Instance ID                     : uuid:a50a976c-425e-1347-83f7-ab037723b6e3
Original Document ID            : xmp.did:9e0d3385-aa9f-4bf0-a48f-7d4b2331b64f
Document ID                     : xmp.id:a5c862dc-0fc5-4c38-8284-6fffe5536fcc
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:6a9a7cb4-5a62-4f50-9091-b9613a6d4f78
Derived From Document ID        : xmp.did:19c091ba-3e9f-4f15-93dd-101809962439
Derived From Original Document ID: xmp.did:9e0d3385-aa9f-4bf0-a48f-7d4b2331b64f
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 13.1 (Macintosh)
History Changed                 : /
History When                    : 2018:11:15 14:52:08-06:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Postscript Name                 : Gotham-Bold, Gotham-Book, Gotham-BookItalic, Gotham-Medium
Family Name                     : Gotham, Gotham, Gotham, Gotham
Face Name                       : Bold, Book, Book Italic, Medium
Font Type                       : OpenTypeCFFFont, OpenTypeCFFFont, OpenTypeCFFFont, OpenTypeCFFFont
Version String                  : Version 2.200 Pro, Version 2.200 Pro, Version 2.200 Pro, Version 2.200 Pro
Composite                       : false, false, false, false
Profile Blob                    : , , ,
Page Count                      : 12
Creator                         : Adobe InDesign CC 13.1 (Macintosh)

EXIF Metadata provided by EXIF.tools