Uniden America LRD950 RADAR DETECTOR User Manual
Uniden America Corporation RADAR DETECTOR
user manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2470157 |
| Application ID | lHtSvvPCrCmmoVbWcq1pqA== |
| Document Description | user manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 26.09kB (326111 bits) |
| Date Submitted | 2014-12-11 00:00:00 |
| Date Available | 2014-12-11 00:00:00 |
| Creation Date | 2017-10-20 04:56:54 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-10-20 04:56:54 |
| Document Title | user manual |
| Document Creator | Adobe InDesign CS6 (Macintosh) |
KEYS Keys on the unit let you adjust and mute the alert volume, dim the OLED brightness and mark specific GPS locations where radar/Laser detection is common. Press MENU to enter the Menu system and set up the unit to your own specifications. Power Jack Audio Jack IN THE BOX: LRD950 radar detector Coiled 12V DC Power Cord with RJ45 Connector Windshield Mounting Bracket Hook and loop fastener tape Spare fuse for DC Power Cord DISCLAIMER: Radar detectors are illegal in some states. Some states prohibit mounting any object on your windshield. Check applicable law in your state and any state in which you use the product l to verify that using and mounting a radar detector is legal. Uniden radar detectors are not manufactured and/or sold with the intent to be used for illegal purposes. Drive safely and exercise caution while using this product. Do not change settings of the product while driving. Uniden expects consumer’s use of these products to be in compliance with all local, state, and federal law. Uniden expressly disclaims any liability arising out of or related to your use of this product. Eagle Eye FEATURES USB 2. Attach the rubber cups to the bracket and push the bracket firmly onto the windshield. Slide the unit onto the bracket. Plug the power cord into the detector and plug the cigarette lighter adapter into the vehicle’s cigarette lighter. Release the bracket by pressing the Eject key. DASHBOARD 1. 2. Attach the unit to the dashboard using the hook and eye fastener tape. Plug the power cord into the detector and plug the cigarette lighter adapter into the vehicle’s cigarette lighter. Pull the bracket from the dashboard, separating the hook and loop tape. VOL − PRESS TO... PRESS AND HOLD TO... DIM • Bright • Dim • Dark User Mark * • Add • Delete Error message displays/ sounds if memory full or GPS error. Delete all User Marks. POWER Turn LRD950 on and off. VOL + • Turn volume up (6 levels). • In Menus, go to next item. VOL – • Turn volume down (6 levels). • In Menus, go to previous item. MENU Access the Menu system. Voice (ON/OFF) X Band (ON/OFF) K Band (ON/OFF) Ka Band (ON/OFF) POP Mode (ON/OFF) Scan Display (ON/OFF). Display (Tap MENU to cycle through Speed/Compass/Voltage/Altitude, Off) Speed Unit (mph or KM/h) Auto Mute (ON/OFF) Backlight (ON/OFF) Refer to the online Detailed User’s Manual at www.uniden.com for a complete list of all Menu options. NON-KEY ELEMENTS MUTE • MUTE on • MUTE off MUTE MEMORY • Add • Delete WINDSHIELD 1. POWER MUTE/DIM MARK MUTE/DIM Refer to the Detailed User’s Manual at the Uniden website: www.uniden.com for a complete list and explanation of features. INSTALL LRD950 Eject Frequency Strength KEY MARK Voice alert Displays radar band frequencies GPS for Red Light and Speed camera locations K band filter Spectre I and IV undetectable Voice Alert. Signal Strength Meter displays Current Speed, Compass, Battery Voltage, Altitude, and Clock. MENU Latch Slot This Basic User’s Manual provides instructions on installing and using the LRD950. It contains basic information on how the keys operate. For more detailed information, refer to the Detailed User’s Manual at the Uniden website: www.uniden.com • • • • • • • VOL + Ka 33.77GHz LRD950 VOL + : Go to the next Menu item. VOL – : Go to the previous Menu item. Menu items commonly used for initial setup are: mph LONG RANGE RADAR/LASER DETECTOR BASIC USER’S MANUAL LRD950 OVERVIEW --- UNIDEN ELEMENT WHAT IT DOES Eagle Eye Provides a 360° monitoring radius. USB Provides PC connection for data updates. Audio Jack Plug in headset. Eject Press to release the bracket latch. Power Jack Plug the 12V Power Cord here. BASIC OPERATIONS This section details LRD950 basic operations. Refer to the online Detailed User’s Manual at www.uniden.com for more complete details on all operations and Menu options. TURN ON NA Press and hold both VOL + and VOL – to change modes between HIGHWAY and CITY. Press POWER. The unit turns on and runs through an initial self-check. It displays the different bands and their settings. The LRD950 turns on automatically when you start the car. ADJUST VOLUME Press VOL + to increase volume. The unit beeps, announces “Volume (0 - 6),” and displays a number increase. Exit the Menu system. * User Marks are manually tagged GPS locations where radar detection is normally located. For more information, refer to the online Detailed User Manual at www.uniden.com. Press VOL – to decrease volume. The unit beeps, announces “Volume (0 - 6),” and displays a number decrease. MUTE VOLUME DURING ALERT You can mute the alert volume during an alert. This is especially useful in situations where the alert may be prolonged, such as at red lights. Press MUTE/DIM during an audio alarm to mute it. MENU SYSTEM Press MENU to access the Menu system. The screen displays the selection’s current status. Use the following keys to navigate the menus: MENU: Change a setting (press and hold to exit the Menu system). CHANGE THE OLED’S BRIGHTNESS The backlight has three settings: BRIGHT, DIM, and DARK. Press and hold MUTE/DIM. The detector announces the brightnes level as it changes to that level. Press and hold the keys again to move to the next level. TURN BANDS ON/OFF 10.525 GHz Dimensions The LRD950 monitors X (HIGHWAY only), K, and Ka bands as well as Laser transmissions. CHANGE HIGHWAY TO CITY AND BACK Press and hold both VOL + and VOL – for at least 1 second to alternate between 24.150 GHz Weight 6 oz (170g) Ka 33.400 - 36.000 GHz Operating Temp. -4° to +185° F (Radar/Laser) -20° to +85° C (Radar/Laser) 800 nm - 1100 nm Storage Temp. -22° to +203° F (Radar/Laser) -30° to +95° C (Radar/Laser) Operating Power Source DC 11.0 to 16.0 V USB Interface USB Specification 2.0/1.1 HIGHWAY and CITY setting. MARK USER MARKS (RADAR/LASER SITE) With the LRD950, you can mark geographical points where you commonly encounter radar transmissions, These can be school zones, red-light cameras, and places where police frequently monitor traffic. You can mark these points so the detector will announce “User mark ahead” when you approach them. When you are at the location, press MARK. The detector announces “User mark logged.” Now, when you approach these points, the detector announces “User mark ahead” and begins a distance countdown to the point of marking. Laser Detector Type: Radar Scanning Frequency Discriminator Laser Pulse Width Discriminator Press and hold MARK at that location to delete that user mark. TROUBLESHOOTING Alarm Type IF... TRY THIS... No display or audio. Check the fuse in the plug. Replace if necessary. The unit alarms when the vehicle hits bumps. Check the connections. Be sure they are all secure. The unit alarms briefly in the same location but no radar source was in view. There may be a motion sensor or house alarm in use within range. The detector did not alert when a police car was in view. • The officer may not have radar/ laser units turned on. • Check that the band are turned on. Press MENU. If the band is turned on, the OLED will show ON. The car starts but the detector does not turn on. • Verify that the power cord is securely connected to the unit and inserted into the cigarette lighter jack. • Change the fuse in the power cord. Unscrew the cigarette lighter jack to access the fuse. 110.00 mm (D) x 69.00 mm (W) x 29.50 mm (H) Beep (Detected Band and Signal strength) FCC/Industry Canada Information FCC: AMW-LRD950 ICC: 513C-LRD950 This device complies with part 15 of the FCC Rules. Operaion is subject to the following two condiions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operaion. Unauthorized changes or modiicaions to this equipment may void compliance with the FCC Rules. Any change or modiicaion must be approved in wriing by Uniden. Changes or modiicaions not approved by Uniden could void the user’s authority to operate the equipment. L’appareil est conforme aux normes d’Industrie Canada. Son foncionnement est soumis aux deux condiions suivantes : (1) Ce disposiif ne doit pas causer d’interférences et (2), il doit pouvoir accepter les interférences, incluant celles pouvant nuire à son foncionnement normal. Tous les changements apportés à cet appareil, s’ils ne sont pas expressément approuvés par Uniden ou toute uilisaion de celui-ci d’une autre manière que celle décrite dans ce guide peut annuler votre autorisaion de le faire foncionner. Limited Warranty Keep your receipt! Proof of purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORP. (“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials and cratsmanship with only the limitaions or exclusions set out below. WARRANTY DURATION: This warranty to the original user shall terminate and be of no further efect 12 months ater the date of original retail sale. The warranty is invalid if the Product is (A) damaged or not maintained as reasonable or necessary, (B) modiied, altered, or used as part of any conversion kits, subassemblies, or any coniguraions not sold by Uniden, (C) improperly installed, (D) serviced or repaired by someone other than an authorized Uniden service center for a defect or malfuncion covered by this warranty, (E) used in any conjuncion with equipment or parts or as part of any system not manufactured by Uniden, or (F) installed or programmed by anyone other than as detailed by the Operaing Guide for this product. STATEMENT OF REMEDY: In the event that the product does not conform to this warranty at any ime while this war-ranty is in efect, warrantor will repair the defect and return it to you without charge for parts, service, or any other cost (except shipping and handling) incurred by warrantor or its representaives in connecion with the performance of this warranty. THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or limitaion of incidental or consequenial damages so the above limitaion or exclusion may not apply to you. LEGAL REMEDIES: This warranty gives you speciic legal rights, and you may also have other rights which vary from state to state. This warranty is void outside the United States of America. PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, ater following the instrucions in this Operaing Guide, you are certain that the Product is defecive, pack the Product carefully (preferably in its original packaging). Include evidence of original purchase and a note describing the defect that has caused you to return it. The Product should be shipped freight prepaid, by traceable means, or delivered, to warrantor at: Uniden America Corporaion C/O Saddle Creek 743 Henrieta Creek Rd., Suite 100 Roanoke, TX 76262 (800) 297-1023, 8 a.m. to 4:30 p.m., Central, Monday through Friday POP Mode is a trademark of MPH Industries, Inc. SPECIFICATIONS Receiver Type: Antenna Type: Radar Double Conversion Superheterodyne Self-Contained Antenna Radar Linear Polarized E-vector Vertical Laser Pulsed Laser Signal Receiver Laser Front Convex Condenser Lens Laser Back Concave Condenser Lens Frequency: Issue 2, December 2014
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Create Date : 2014:12:10 12:30:06-05:00 Creator : Adobe InDesign CS6 (Macintosh) Modify Date : 2014:12:11 09:47:48+09:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2014:12:11 09:47:48+09:00 Creator Tool : Adobe InDesign CS6 (Macintosh) Instance ID : uuid:994d6e10-4bfd-4f92-b1f7-78f3f772c71c Original Document ID : xmp.did:A9BEFA00966DE411A793B49CEB63EC5C Document ID : xmp.id:9BC395F79B206811822A9DDE8A7521D8 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:9388D1F18280E4118695EDD823DC5536 Derived From Document ID : xmp.did:9388D1F18280E4118695EDD823DC5536 Derived From Original Document ID: xmp.did:A9BEFA00966DE411A793B49CEB63EC5C Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Macintosh) History Changed : / History When : 2014:12:10 12:30:06-05:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 2EXIF Metadata provided by EXIF.tools