Uniden America UA1601 RADAR DETECTOR User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2926781
Application ID	TEoerpbtiZXiFCSzPyiUmg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	26.66kB (333207 bits)
Date Submitted	2016-03-11 00:00:00
Date Available	2016-03-11 00:00:00
Creation Date	2017-11-20 09:35:54
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-11-20 09:35:54
Document Title	User Manual
Document Creator	Adobe InDesign CS6 (Macintosh)

UNIDEN
Auto Mute (ON/OFF)
Backlight (ON/OFF)
This is not a complete list of menu items. Refer to the DFR6 Detailed Owner’s Manual
on www.uniden.com for a complete list of menu items and how to use them.
LONG RANGE RADAR/LASER DETECTOR
BASIC USER’S MANUALEagle
Eye
CITY
Strength
Signal
Latch
Slot
NON-KEY ELEMENTS
ELEMENT
WHAT IT DOES
Eagle Eye
Provides a 360° monitoring radius.
Latch Slot
Insert the bracket latch into this slot.
Mini USB
Provides PC connection for data updates.
Audio Jack
Plug in headset.
MUTE/DIMEject
Press to release the bracket latch.
Power Jack
Plug in the 12V Power Cord here.
Signal Strength
Displays how strong the signal received is (5 levels)
BASIC OPERATIONS
KEY
PRESS TO...
PRESS AND HOLD TO...
MUTE/DIM
MUTE
• MUTE on
• MUTE off
DIM
• Bright
• Dim
• Dark
CITY
Switch between City and
Highway modes.
NA
POWER
Turn DFR6 on and off.
NA
VOL +
VOL –
MENU
TURN ON
• Turn volume up (6
levels).
• In Menus, go to next
item.
NA
• Turn volume down (6
levels).
• In Menus, go to previous
item.
NA
Access the Menu system.
MENU: Change a setting (press and hold to exit the Menu system).
VOL + : Go to the next Menu item.
VOL – : Go to the previous Menu item.
The most common menu items used for initial setup are:
Voice (ON/OFF)
X Band (ON/OFF)
K Band (ON/OFF)
Ka Band (ON/OFF)
Laser (ON/OFF)
POP Mode (ON/OFF)
Display Voltage (ON/OFF)
The DFR6 turns on automatically when you start the car.
ADJUST VOLUME
Press VOL – to decrease volume. The unit beeps, announces “Volume (0 - 6),”
and displays a number decrease.
MUTE VOLUME DURING ALERT
Exit the Menu system.
Press MENU to access the Menu system. The screen displays the selection’s
current status. Use the following keys to navigate the menus:
Press POWER. The unit turns on and runs through an initial self-check. It
displays the different bands and their settings.
Press VOL + to increase volume. The unit beeps, announces “Volume (0 - 6),”
and displays a number increase.
MENU SYSTEM
This section details DFR6 basic operations. Refer to the online Detailed User’s
Manual at www.uniden.com for more complete details on all operations and
Menu options.
You can mute the alert volume during an alert. This is especially useful in
situations where the alert may be prolonged, such as at red lights.
Press MUTE/DIM during an audio alarm to mute it.
CHANGE THE BRIGHTNESS LEVEL
Adjusting the brightness level applies to the OLED, keys, and strength LEDs at
the same time. The backlight has three settings: BRIGHT, DIM, and DARK.
Press and hold MUTE/DIM. The detector announces the brightnes level as it
changes to that level. Press and hold the keys again to move to the next level.
TURN BANDS ON/OFF
The DFR6 monitors X (HIGHWAY only), K, and Ka bands as well as Laser
transmissions.
CHANGE HIGHWAY TO CITY AND BACK
Press CITY to cycle between City and Highway modes.
TROUBLESHOOTING
Laser
IF...
TRY THIS...
No display or audio.
Check the fuse in the plug. Replace if
necessary.
The unit alarms when the vehicle hits
bumps.
Check the connections. Be sure they
are all secure.
The unit alarms briefly in the same
location but no radar source was in view.
There may be a motion sensor or
house alarm in use within range.
The detector did not alert when a police
car was in view.
• The officer may not have radar/
laser units turned on.
• Check that the band are turned
on. Press MENU. If the band is
turned on, the OLED will show
ON.
The car starts but the detector does not
turn on.
• Verify that the power cord is
securely connected to the unit
and inserted into the cigarette
lighter jack.
• Change the fuse in the power
cord. Unscrew the cigarette
lighter jack to access the fuse.
Alarm Type
Radar
Double Conversion
Superheterodyne
Self-Contained Antenna
Radar
Linear Polarized
E-vector Vertical
Laser
Pulsed Laser Signal
Receiver
Laser
Front
Convex Condenser
Lens
Laser
Back
Concave
Condenser Lens
10.525 GHz
Dimensions
110.00 mm (D) x
69.00 mm (W) x
29.50 mm (H)
24.150 GHz
Weight
6 oz (170g)
Ka
33.400 - 36.000 GHz
Operating
Temp.
-4° to +185° F
(Radar/Laser)
-20° to +85° C
(Radar/Laser)
800 nm - 1100 nm
Storage Temp.
-22° to +203° F
(Radar/Laser)
-30° to +95° C
(Radar/Laser)
Operating
Power Source
DC 11.0 to 16.0 V
USB Interface
USB Specification
2.0/1.1
Laser
Detector Type:
Radar
Scanning Frequency
Discriminator
FCC/Industry Canada Information
FCC: AMWUA1601
ICC: 513C-UA1601
This device complies with part 15 of the FCC Rules. Operaion is subject to the
following two condiions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operaion.
Unauthorized changes or modiicaions to this equipment may void compliance
with the FCC Rules. Any change or modiicaion must be approved in wriing
by Uniden. Changes or modiicaions not approved by Uniden could void the
user’s authority to operate the equipment.
L’appareil est conforme aux normes d’Industrie Canada. Son foncionnement
est soumis aux deux condiions suivantes : (1) Ce disposiif ne doit pas causer
d’interférences et (2), il doit pouvoir accepter les interférences, incluant celles
pouvant nuire à son foncionnement normal.
Tous les changements apportés à cet appareil, s’ils ne sont pas expressément
approuvés par Uniden ou toute uilisaion de celui-ci d’une autre manière
que celle décrite dans ce guide peut annuler votre autorisaion de le faire
foncionner.
POP Mode is a trademark of MPH Industries, Inc.
Spectre I and Spectre IV are trademarks of Stealth Micro Systems Pty. Ltd.
VG2 is a trademark of TechniSonic Industries LTD.
Keep your receipt! Proof of purchase is required for warranty service.
Antenna Type:
Frequency:
Beep (Detected Band
and Signal strength)
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, ater following
the instrucions in this Operaing Guide, you are certain that the Product is defecive, pack the Product carefully (preferably in its original packaging). Include
evidence of original purchase and a note describing the defect that has caused
you to return it. The Product should be shipped freight prepaid, by traceable
means, or delivered, to warrantor at:
Uniden America Corporaion
C/O Saddle Creek
743 Henrieta Creek Rd., Suite 100
Roanoke, TX 76262
(800) 297-1023, 8 a.m. to 4:30 p.m., Central, Monday through Friday
Limited Warranty
SPECIFICATIONS
Receiver Type:
Pulse Width
Discriminator
WARRANTOR: UNIDEN AMERICA CORP. (“Uniden”)
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original
retail owner, this Uniden Product to be free from defects in materials and
cratsmanship with only the limitaions or exclusions set out below.
WARRANTY DURATION: This warranty to the original user shall terminate
and be of no further efect 12 months ater the date of original retail sale.
The warranty is invalid if the Product is (A) damaged or not maintained
as reasonable or necessary, (B) modiied, altered, or used as part of any
conversion kits, subassemblies, or any coniguraions not sold by Uniden,
(C) improperly installed, (D) serviced or repaired by someone other than an
authorized Uniden service center for a defect or malfuncion covered by this
warranty, (E) used in any conjuncion with equipment or parts or as part of
any system not manufactured by Uniden, or (F) installed or programmed by
anyone other than as detailed by the Operaing Guide for this product.
STATEMENT OF REMEDY: In the event that the product does not conform
to this warranty at any ime while this war-ranty is in efect, warrantor will
repair the defect and return it to you without charge for parts, service, or
any other cost (except shipping and handling) incurred by warrantor or its
representaives in connecion with the performance of this warranty. THE
LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY
PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL
OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS,
IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED
TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR
THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES. Some states do not allow this exclusion or limitaion of incidental
or consequenial damages so the above limitaion or exclusion may not apply
to you.
LEGAL REMEDIES: This warranty gives you speciic legal rights, and you may
also have other rights which vary from state to state. This warranty is void
outside the United States of America.
Issue 1, March 2015

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Create Date                     : 2015:03:24 10:57:04-04:00
Creator                         : Adobe InDesign CS6 (Macintosh)
Modify Date                     : 2016:03:04 14:58:10+09:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date                   : 2016:03:04 14:58:10+09:00
Creator Tool                    : Adobe InDesign CS6 (Macintosh)
Instance ID                     : uuid:e00a4c2e-097f-47d6-930d-496019030f42
Original Document ID            : xmp.did:A9BEFA00966DE411A793B49CEB63EC5C
Document ID                     : xmp.id:6BC2FBC67E206811822AB8C0421B7924
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:F0FC364830D2E411A6B7A4915CB76950
Derived From Document ID        : xmp.did:F0FC364830D2E411A6B7A4915CB76950
Derived From Original Document ID: xmp.did:A9BEFA00966DE411A793B49CEB63EC5C
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Macintosh)
History Changed                 : /
History When                    : 2015:03:24 10:57:04-04:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 2

EXIF Metadata provided by EXIF.tools