Uniden America UB310 User Manual Draft Owners Manual
Uniden America Corporation Draft Owners Manual
Draft Owners Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 62300 |
| Application ID | eBoWFrg5y5K2I5L1TlEeQg== |
| Document Description | Draft Owners Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 130.68kB (1633488 bits) |
| Date Submitted | 1999-10-06 00:00:00 |
| Date Available | 2000-02-03 00:00:00 |
| Creation Date | 1999-10-06 09:28:39 |
| Producing Software | Photoshop PDF Plug-in 1.0 |
| Document Lastmod | 1999-10-06 09:29:18 |
| Document Title | Draft Owners Manual |
| Document Creator | Photoshop PDF Plug-in 1.0 |
User Manual
DRAFT COPY OF THE INSTRUCTION MANUAL
ub310—15 16
Preface
This model is added FM/I'V radio functions and binocular. Various kinds
specification/functions are described to this specifications.
Overview of Features
Frequency( Receiver )
Band Coverage(MHz)
CAR
150.9950 - 151.9550
152.8700 - 153.7250
154.4900 - 154.6250
460.0000 — 470.0000
MILITARY
137.0000 — 144.0000
SOOMHZ
806.0000 - 823.9375
851.0000 - 868.9375
896.1125 - 956.0000
FEDERAL GOVERNMENT
406.0000 - 420.0000
AIR
108.0125 - 136.9875
MARINE
156.0500 - 157.4250
VHF/UHF
148.0000 - 174.0000
450.0000 - 470.0000
HAM
144.0000 - 148.0000
420.0000 - 450.0000
WX
USA/CND(10CH)
ub3IO-15 17
FM/TV
88.0000 - 108.0000(100KHz STEP)
475.7500 - 511.7500(6MHz STEP)
Key Functions
There are function key and editing key in the key.
Function Key
Manual
Del/Cancel
Private
Search
A V
Hold/Call
Memory
Weather
FM/TV
Editing Key
0-9,.(A—Z,/,-,&,“)
ENTER
LCD Display
Manual Mode
Search Mode
Programmed Band
“CAR” is turn on, when tune to programmed CAR band.
“MIL” is turn on, when tune to programmed Military band;
800MHz
“800” is turn on, when tune to programmed 800MHZ bandr
“FED” is turn on, when tune to programmed Federal Government band
ubSlO—lfi 18
“AIR” is turn on, when tune to programmed Air band.
“MRN” is turn on, when tune to programmed Marine band.
“V/U” is turn on, when tune to programmed VHF/U HF band.
“HAM” is turn on, when tune to programmed Ham band.
Private Mode
J acks/ Others
Earphone
Antenna
NOTES:
The possession, or use of this scanning radio in a motor vehicle maybe
prohibited, regulation, or require a permit in certain states, cities, and/or
local jurisdiction. Your local law enforcement officials should be able to
provide you with information regarding the law in your community.
Change or modifications to this product not expressly approved by Uniden, or
operation of this product in any way other than as detailed by this operation
guide, could void your authority to operate this product.
External View
See Fig. 01
Input and Output Devices
Power Switch
The Power Switch is combined with the Volume control device.
uh310—15 19
(TOP VIEW)
Fig. 0.1 External View
(See mechanical drawings for detailed appearance)
ub310~15 20
Display Device
I I I Alignment of LCD Module I I I
E!“ IE u... :§§ ig 2: Eu lull -% shag sum...
PRV SRCH MAN wx
CAR M/L goo FED AIR MRN V/U HAM
Fig. 0.1 LCD Display View
LCD Display
LCD spec
5 X 8 dotX 16 digits X 2 lines + 13 icons
ICONS
This LCD has 13 icons for programmed band and mode.
PRV
This is private mode. You can set programmed names and
frequencies, or amending them.
SRCH
This is search mode. You can search pre-programmed band
by yours.
MAN
This is manual mode. Search mode and private mode is stopped by
selecting manual mode. Then you can set names and frequencies
directly.
WX
This is weather band. When you select weather band, this icon turns on.
uh310—15 21
ub310—15 22
TV/FM
This is TV/FM band. When you select TV/FM band, this icon
turns on.
CAR
This is car band. When you select car band, this icon
turns on‘
MIL
This is military band. When you select military hand, this icon
turns on.
800
This is SOOMHZ band. When you select 800MHz hand, this icon
turns on.
FED
This is federal government band. When you select federal
government hand, this icon turns on.
AIR
This is air band. When you select air band, this icon
turns on.
MRN
This is marine band. When you select marine hand, this icon
turns on.
V/U
This is VHF/UHF band. When you select VHF/UHF hand, this
icon turns on.
HAM
This is amateur radio band. When you select amateur radio band,
this icon turns on.
orflflonlfisk
Power ON
Rotate the VOL switch knob clockwise to turn on the power. Then change
MANUAL mode automatically and MAN icon turn on, other one tum off.
Yet, it wake up in the condition before Power OFF in 2"d Power ON.
9 3 I ‘
l l , . j
SRGH MAN m FM/TV
GAR MIL aoo FED AIR MRN V/U mu
Fig. 0.1 Power ON Initial Displny
"Wiffii MAN £404 i/f/E‘V
. /
{2/2}? 53555” 3&6? $55? ..féffi Mfffg 2/75} f‘ffififf
Fig. 0.2 Manual Mode (Power ON Default)
At this time, the set flashes a cursor and wait for key input for receiving band.
“310-15 23
Power OFF k
Rotate the VOL switch knob counterclockwise to turn off the power.
Search Mode
Band that wants to search it, by pushing the search key repeatedly able to
be selected. Afier the search key is pushed it go to ALL most firstly.
And, the band is selected whenever the search key is pushed.
ALL>CAR>MIL>800>FED>AIR>MRN>WU>HAM
>ALL>CAR....
fWV SROH $3721”? WK WM, 73/
CAR MIL 800 FED AIR MRN V/U HAM
Fig.0.JScanMode(ALLbandscannlng)
All the band icons and SRCH icon turn on at the time of the ALL band
selection.
VHF
S3??? SRO/1 §L§f§f
GAR fled? M? £5552 £52
fé/f/ fix“
Eff/é} figs?
Fig. 0.4 Scan Mode ( CAR band scanning)
ub310-15 24
The CAR icon and SRCH icon turn on at the time of the CAR band selection.
Also, even other band are similar.
SearchBANDatthetimeofALL
It become selection receiving mode, when that the MEMORY or ENTER
key is pushed in the ALL table current events. It becomes Fig. 0.5, by
pushing MEMORY or ENTER key in the condition of Fig. 0.3.
CHE: UH
sew SROH fife??? m if; A}?
CAR MIL 800 FED AIR MRN V/U HAM
Fig. 0.5 Scan Mode ( Set Selection Receiving ON )
Whenever the MEMORY key is pushed here, ON and OFF change.
And, the following icon is turned on and off in accordance with ON and
OFF display.
7mm IZIFF
SRCH ééiAAA‘ » .
Vii? MIL 800 FED AIR MRN V/U HAM
Fig. 0.6 Scan Mode ( Set Selection Receiving OFF )
ub310-15 25
ON : Search Enable
OFF : Search disable
It so to next BAND by pushing ENTER key aflel the selection.
HIL DH
53??? if” SRCH $4;fo 9505 ffifi/ 15?
CAR MIL 800 FED AIR MRIV V/U HAM
Fig. 0.7 Scan Mode (Set Next Band selection)
Also, BAND is changing like a following whenever the ENTER key is
pushed.
CAR>MIL>800>FED>AIR>MRN>VIU>HAM>CAR....
All setting contents of ALL are saved to EEPROM.
“310-15 26
Search Start
After the BAND selection, the search is started with UP(A) key or
DOWN key(') . At this time, only BAND that is turning on it searches.
LiHF-f UH
”3? i/ SRGH feat/i}? W}? ffi/fl/
GAR MIL 864? 245} Ali? MRN izfx if HAM
Fig. 0.8 Finished selection
In the case that a signal is received during the search, the search stop and
stay to the receiving frequency. Searching is started once again, in the
case that the signal disappeared. (Auto delay 2 sec) You can always
change to Search Mode(See Section 0), by pushing the search key during
receiving or during searching.
Search Hold
Even if there be not a radio wave in the frequency, by pushing the HOLD
key during the search it can stay.
IZZFlF: 15 1 .. E'jE-Eil' HE
5355? SR H “ 3345} W)? i- M, f 2)
CAR MIL . ” 5) AIR MRN 22/1} HAM
Fig. 0.9 Stay/Hold mode during the search
ub310-15 27
The SEARCH key is pushed once spin, in the case that you want to
cancel HOLD mode. Or UP(A) key or DOWN(V) key are pushed.
Then once again it begins to search it.
Memory of frequency during the search mode
Present frequency is able to be remembered by pushing the MEMORY
key in any condition of SEARCH MODE. And the data that memorized
can call again by Private Mode.
Alter the MEMORY key is pushed, a cursor moves on the left most and
become the input waiting of a frequency name.
5555.5; SRCH 5555555; 5515 5525/ 5 fi/
GAR MIL 4/5553 z55535 AIR MRN 3°75] HAM
ZF'lE. 1 5 1 .. 295E1lle
Fig. 0.10 Frequency name setting
In case of Fig. 0.10, the cursor is blinking. And it wait for the input of
the name by the Editing Key.
ubSIO-IS 28
The input method of the name is described following.
Key that uses it :
a) 0-9,.(A-Z,/,-,&,‘)Key
b) Enter Key(Name registration)
0) Memory Key(Name registration)
d) UP(A) Key is lefi shin oursor(Clear Character)
e) DOWN(V) Key is right shift cursor(Settlement Character)
1) Del/Cancel Key is function for return to before input.
Key input is becoming toggle, and an input character changes by that
pushes repeatedly.
In case of that “1” key is pushed, display changes to the turn from A to 1.
A>B>C>1>A>B>...
Ill-“JR Ii-JFElEfHF-IE
£213le 151. E'BSLBHHE
SROH we w fiM/Lf’éf
GAR MIL 3535? gt}? AIR MRN m; HAM
“(1310-15 29
Fig. 0.11 Input character for frequency name 1
tee IHFDEUBTIDHI
UHH 151.335ENH:
37333 if SRCH 33A 53 WX 53/2/33"
GAR MIL 33363 355?) All? MRN 23/3} HAM
Fig. 0.12 Input character for frequency name 2
If name character input finishes, name registration finishes by pushing
Enter Key or Memory Key. (See Fig. 0.13) In the case that you want to
modify it, a cursor can be moved with UP key or DOWN key. And it
returns in the condition before input by pushing Del/Cancel key in the case
that I finish without inputting data. Also, It changes to Search Mode by
pushing SEARCH and changes Private Mode by pushing PRIVATE.
GEE IHFDEUQTimH
UHH 151,335uHHz
3133333? SRCH Mfiéf Q‘X 315333
CAR MIL 535343 33:73? All? MRN 3/33} HAM
Fig. 0.13 Input character for frequency name 3
ub310-15 30
m,“
Private Mode
It can change to the Private Mode even from which mode by pushing the
PRIVATE key. It is possibility to do the tune that selects your programmed
BAND by pushing PRIVATE key repeatedly. After the private key is pushed
it go to ALLmost firstly. And, the band is selected whenever the search key is
pushed. Yet, when it went Private Mode alter the 2“, It goes to condition of
the previous time.
ALL>CAR>MIL>800>FED>AIR>MRN>VIU>HAM
>A1L>CAR....
Yet, only BAND that has already been registered is selected automatically.
m mas/W
GAR MIL éoa FED 14/R MRN V/U HAM
Fig. 0.14 Private Mode (Programmed all hand scanning)
All the band icons and PRV icon turn on at the time of the ALLband
selection.
"Ml 0-15 ll
PRV $1595??? WW 52W 55W???
GAR Wii. 805? £43?) £225? Wfifii 2/75} WfiW
Fig. 0.15 Private Mode ( CAR band seeming)
The CAR icon and PRV icon tum on at the time of the CAR band selection,
Also, even other band are similar.
Private Search BAND at the time of ALL
It become selection receiving mode, when that the MEMORY key is
pushed in the ALL table ament events. It becomes Fig, 0.16, by pushing
MEMORY key in the condition of Fig‘ 0.14.
IIFlF.‘ ! JH
PRV $3"? ;; ‘ff ' 3" W/E’i’ks
CAR MIL 800 FED AIR MRN V/U HAM
Fig. 0.16 Scan Mode ( Set Selection Receiving ON)
Whenever the MEMORY key is pushed here, ON and OFF change.
And, the following icon is turned on and off in accordance with ON and
OFF display.
“310-15 32
Lil-F! UF F
PRV SQ??? M? SSS M Weff/ fix“
ma“ ”ll. ”0 FED AIR MM V/U I'M”
Figo.17SunMode(SetSelectionRecelving0FF)
ON : Search Enable
OFF : Search disable
It go to next BAND by pushing ENTER key afier the selection.
H I L DH
PRV ~ mi? ;;-‘/ fawn/f
GAR MI]. 800 FED AIR MRN V/U HAM
Fig. 0.18 Scan Mode ( Set Next Band selection)
Also, BAND is changing like a following whenever the ENTER key is
pushed.
CAR>MIL>800>FED>AIR>MRN>VlU>HAM>CAR....
ub3l 0-15 33
Private Search Start
Afler the BAND selection, the search is started with UP(A) key or
DOWN key(V) . At this time, only BAND that is turning on it searches.
At this time, scanner changes 1 memory each with usual A/V key input
and carry out searching of a signal by pushing A or V for 2 seconds.
_.- I _
LHE. UH
PRV $335??? was} WX KJM/ 315
GAR MIL $53? 5457}? AIR MRN 9/35} HAM
Fig. 0.19 Finished selection
In the case that a signal is received during the search, the search stop and
stay to the receiving frequency. Searching is started once again, in the
case that the signal disappeared. (Auto delay 2 sec) However, it does not
search it even if a signal disappears when it is not searching it You can
always change to Private Mode(See Section 0), by pushing the private key
during receiving or during searching
Modification of band frequency and name
When the MEMORY key is pushed, a cursor moves and blinks to the
biggest column of the present frequency. Moving a cursor in the place
where you want to modify with UP or DOWN key, it modifies it with the
Editing Keyt It is registered with ENTER or MEMORY key after the
modification. Outputting the error alert, in case that the frequency that
does not exist is input it displays to [CD as “ERROR”. That moment, it
returns to the frequency before MEMORY is pushed.
“MW-15 34
It moves to the setting of a name automatically after frequency setting. A
name even also frequency as it inputs it with the EDITING key similarly.
It is registered with ENTER or MEMORY key afier the modification.
EilrlF-f IHFEI 1
EIFlF-f 151. ”“5'5431‘1Hz
PRV $3555? MAJ? W}? f’M/ f'if
OAR fifffi 390 5222? AM? fififfaf if/{f 5&5?
Fig. 0.20 Finished frequency and name modification
It becomes HOLD condition with the frequency that set up it after the
input of the band name. And it returns in the condition before input by
pushing Del/Cancel key in the case that I finish without inputting data.
Also, It changes to Search Mode by pushing SEARCH and changes
Private Mode by pushing PRIVATE.
Search Hold in Private Mode
Even if there be not a radio wave in the frequency, by pushing the HOLD
key during the search it can stay. The UP(A) key or DOWN(V) key is
pushed once again, in the case that you want to cancel HOLD mode. Then
once again it begins to search it
Calling of the registered memory
Frequency can be called and can be searched from the name that was
registered. The CALL mode is changed by pushing HOLD/CALL key
from the BAND selection screen of PRIVATE mode. When it changed
to the CALL mode, the cursor is displayed to the top of a registration
name‘ A cursor blinks. The name is input by using the EDlT key.
ultllll-IS 35
ub3|0-15 38
PRV éWai/‘fz‘ we fix? fig/3?
Q»??? m; 3&3 $220 fie??? fififié E4?! fifééf
Fig. 0.21 Call Mode
WELTFII
PRV \ I fifiiéxf WX 5&3 3’?
0/251? Mg ”$6 5??? at??? was 9/6 37925»?
Fig. 0.22 Call Mode(During Input)
When HOLD/CALL key is pushed after the input of a name the set start
the searching of data and the nearest data is displayed. After that, other
data are displayed in order with UP(A) key and DOWN(V) key. Yet, the
next alternative is displayed, when there is not only 1 searching alternative.
For instance, all the data that begin with “A” become the searching
alternative when “A” is searched. And data is displayed in order from the
small one of alphabet. It searches all memory, in case that searching with
no character.
Pushing ENTER key or HOLD/CALL key once again and data is decided,
if the intended name is discovered into the alternative that searched it. It
becomes HOLD condition with the frequency alter decision. And it returns
in the condition before input by pushing Del/Cancel key in the case that I
finish without inputting data. Also, It changes to Search Mode by pushing
SFARCH and changes Private Mode by pushing PRIVATE
H::;n::nP |:H1
iHE2151.29_BNHz
$3353.33? WW? ”3/2’ s “337 W
3933? {£233 £57? Mfg“? i053" iii/33333
CPfR Mr?
Fig. 0.23 Searching Alternative
Manual Mode
The input of the frequency is possible with manual in the MANUAL mode.
When MANUAL mode key is pushed, the set blinks a cursor and wait for
key input frequency. The frequency is input by using the EDIT key. It
becomes HOLD condition by Eight column input or ENTER key is pushed
after input.
Fig. 0.24 Manual Mode (MANUAL key is pushed )
ub310-15 37
In the case that the frequency that does not exist is input ERROR alert is
output, and displays ERROR message to ICD. At this time, the LCD display
returns in the blinking condition of a cursor. When the MEMORY key is
pushed during the MANUAL mode, it changes to the MEMORY mode. The
input method is similar as MEMORY MODE( See Section 0 ).
One Touch Service search
The search is possible with one touch operation, by pushing WEATHER key
and I’M/TV key.
Weather Channel Search
WAETHER can search 10 channels of USA/CND. It is delayed for 2
seconds automatically, when it was able to receive it. Futthennore, it
changes in BOLD condition when HOID key is pushed.
Mix:
QAK’ (fix/£55
Fig, 0.25 wx Channel
“310-15 38
WX ChannelflJSA/CND) :
a) 161.6500Ml-lz
b) 161.7750Ml-lz
c) 162.4000MHz
d) 162.4250MHz
e) 162.4500MHz
f) 162.4750MHz
g) 162.5000MHz
h) 162.5250MHz
i) 162.5500MHz
j) 163.2750MHz
TV/FM Channel Search
“310-15 39
It becomes HOLD condition with 88.0000MHz in default state, when
TV/FM key is pushed. It starts to search with UP key and DOWN key.
Also, this search is possible with one touch memory, while it is able to
receive the station of somewhere. It makes figure key( “0” - “9” ) One
Touch Key to call. Registration channel is tuned by pushing One Touch
Key. It is able to register to memory, by continuing to push One Touch
Key for one second.
Fig. 0.26 FM/TV Channel
In case of the selected frequency is used for PM radio, LCD displayed as
FM. In case of frequency for TV, LCD displayed as TV, also. One Touch
Key registration afler, the memory number that registered is displayed to
1“ line.
P'Ei'lflfitfi‘ 1
F P1 23151. Efififi'flz
53W? ffi-‘fi’éfif gig/i515 5&7 FH/TV
0A??? 2&5. éféiéf $55.12} fig? figélffsf Ef/éf 55/35»?
Fig. 0.27 One Touch Key Registration
When the memory key is pushed, Temporary One Touch Registration
name is cleared. Cursor displays left and The set goes name registration
mode. The name registration method is same as other one.
Fig. 0.28 One Touch Name Registration
ub310-15 40
HE“: RHE'II
FM 15251. WWW-i:
WX FM/TV
{-"f€?§/ $585??? KAN
6/34”? M311 22526? 31553 X??? M36} if/{f’ éféeief
Fig. 0.29 Name Input In One Touch Key negotiation Mode
Tone
This set have 3 kinds of tone. These are used according to situation. The tone
that is used is the following.
a) Key Touch Tone(“Pi”)
b) Error Tone / Battery Low Tone(“Bu”)
c) Confirmation Tone(“Pi” “Pi”)
Key Touch
This set has the function that outputs tone(“Pi”) when the key pad was pushed.
Key Touch Tone :
I 50 nusec |
| 25 gig | 1.2 Kliz
Fig. 0.1 Key Touch Tone Frequency Diagram
ub310-15 41
Error Tone
When in the case that the value of range outside is input and the key that is not
able to use is pmhed tone is output to etc.
Error Tone/Battery Low Tone :
I 100 new |
_&
Fig. 0.2 Battery Low Tone Frequency Diagram
Battery Low Tone
It informs it with I£D display(“Battery Low”) and alert(“Bu”), in the case
that battery voltage is low. Battery Low Alert sounds every 15 seconds.
Error Tone/Battery low Tone :
I 100 msec I
E&
Fig. 0.3 Battery Low Tone Frequency Diagram
Confirmation
Confirmation tone(“Pi” “Pi”) is sounded twice at the time of setting
completion. This tone is due to setting completion confirmation.
ub310-15 42
Bomry Low Display
“Battery Law” is displayed to LCD, in ease that battery voltage low. And it
blinks it
BRTTER? LEM...
57}? i/ z§§ifé§ Mfifs” WX 531? ff?
(22225? W 3§§ fiifi’ 3&5}??? iffy NAM
Fig. 0.1 Battery Low Display
Key Lock/Unlock
This set has the lock function of key operation, This is possible by moving the
slide switch. All the key operation without working in Lock condition, That
moment, the LCD displays as “KEY IDCK ON”. And the display disappears
3 seconds later. Similarly, the IED displays as “KEY IDCK OFF“ in Unlock
condition. And the display disappears 3 seconds later, also.
HE? LUCK DH
' . if???
432??? MQIV K
Fig. 0.1 Key Lock ON
uh3|0—l5 43
HE? LUEH DFF
54??? 9‘ Sféfié-Z diffs/sf WX 5‘3’597 ?' if
OAR M325. 85/5 25575} 41? M91”; 9/8 M1432?
MOJKeyLOCkOFF
Key Input Action In Key lock Condition
When key was pushed in key lock condition, key operation is ineffective.
And [CD displays as “KEY LOCK” for MED informs this condition to
user. This display disappears 3 seconds later. After that [CD be return to
the display of the previous time.
HE? LUCK
Q??? £Q€3f~f £9??? X if'éé/ 3”?
CAR fisz’é {9535} W2? A??? 33 K? E42} my
Fig. 0.3 Key Is Pushed In Key Lock Condition
“NW-IS 44
WSetting
The setting contents at the time of fictory shipment are described. And, this
set have the initialization command. This set returm to factory shipment
condition by doing following operation at power off condition.
[2] , [9] and [MAN] keys are pushed simultaneously
Going Power ON condition by this operation, initialization is started. If power
supply was turned off( Power OFF ) midway of initialization, the scanner
starts initialization at next Power ON.
[mm——
___—
___—
n___
___
___—
"MW-I5 45
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Modify Date : 1999:10:06 09:29:18 Creator : Photoshop PDF Plug-in 1.0 Producer : Photoshop PDF Plug-in 1.0 Create Date : 1999:10:06 09:28:39 Page Count : 30EXIF Metadata provided by EXIF.tools