Uniden America UC357 Cordless Telephone System - Base User Manual EXP2240

Uniden America Corporation Cordless Telephone System - Base EXP2240

users manual

EXP2240 SeriesEXP2240 12/19/1 10:28 AM Page 11
1IntroductionThe Uniden EXP2240 Series (EXP2240/EXP2241/EXP2243) 2.4 GHz cordless phones are designedand engineered to exacting standards for reliability, long life, and outstanding performance.▼Features•2.4 GHz Extended Range Technology• 10-Number Memory Dialing • 20 Channel Autoscan• Pulse/Tone Dialing • Handset Volume Control • 24 Digit Redial• One Touch RocketDial™ Number • AutoTalk™ • AutoStandby™• 7 Hours Talk Time • 14 days Standby Time • Hearing Aid CompatibleThe EXP2240 Series features include AutoTalk and AutoStandby. AutoTalk allows you to answer acall by just removing the handset from the base so you don’t have to waste time pushing buttons orflipping switches. AutoStandby allows you to hang up by simply returning the handset to the base.The UltraClear Plus™ true compander circuitry virtually eliminates background noise. This innovativetechnology provides you with the best possible reception during all your conversations.To protect you against misbilled calls which might result from your phone being activated by otherequipment, the EXP2240 Series has Random Code™ digital security which automatically selects oneof approx. 260,000 digital security codes for the handset and base. Also, the AutoSecure™ featureelectronically locks your phone when the handset is in the base.RocketDial™ is a one-touch speed dial key that automatically dials your most important or frequentlycalled number. The number dialed, is a preset number stored by the user.Be sure to visit our web site: www.uniden.comUniden®is a registered trademark of Uniden America Corporation.AutoTalk, AutoStandby, UltraClear Plus, Random Code, AutoSecure, and RocketDial are trademarks ofUniden America Corporation.As ENERGY STAR®Partner, Uniden has determined that this product or productmodels meets the ENERGY STAR®guide lines for energy efficiency. ENERGY STAR®is a U.S. registered mark.Controls and Functions1415132456712131110981. Handset earpiece2. talk/batt low LED - indicates when phone isin use or the battery is low3. flash - accesses call waiting (if available)4. talk - answers or places calls5. */tone - switches to tone dialing in pulse dialmode6. redial/p - redials the last number / adds atimed pause in a memory dialing sequence.7. Handset Microphone8. m- enters or recalls numbers in memory9. RocketDial - one touch priority key10. end - hangs up a phone call / mutes theringing tone temporarily11. vol (v) - sets the ringer tone and earpiecevolumes12. channel - selects another channel for clearerreception13. Battery Charging Contacts14. Status LED15. find handset - locates the handsetEXP2240 12/19/1 10:28 AM Page 1
2Do the following steps:A. Choose the best location C. Connect the base unitB. Install the battery pack D. Choose the dialing modeA. Choose the best locationBefore choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS includedin the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS. Here are some important guidelines you should consider:• Be sure there is sufficient space to raise the base antenna to a vertical position.• The location should be close to both a phone jack and a continuous power outlet which is notswitchable.• Keep the base and handset away from sources of electrical noise such as motors and fluorescentlighting.• The base can be placed on a desk, tabletop, or mounted on a standard wall plate.B. Install the battery packCharge the battery pack for at least 15-20 hours before plugging the phone line into yourphone.1) Press in on the battery cover release and slide the cover downuntil it comes off.2) Connect the battery pack connector observing correct polarity(black and red wires) to the jack inside the battery compartment.Do not exert any force on this connection. It could cause damageto the battery or handset. The plastic connector will fit togetheronly one way. Once you are certain that you have made a goodconnection, then insert the battery pack into the batterycompartment. Do not pinch the wires.3) Securely close the battery compartment cover by sliding it upuntil it snaps into place.Avoid heat sources, such as radiators,air ducts, and sunlightAvoid television sets and otherelectronic equipmentChoose a central locationAvoid noise sources such as a window by astreet with heavy trafficAvoid microwave ovensAvoid excessive moisture, extremelylow temperatures, dust, mechanicalvibration, or shockAvoid personal computersAvoid other cordless telephones• Base • AC Adapter • Rechargeable Battery• Handset • Telephone CordIncluded with Your PhoneSetting up the PhoneEXP2240 12/19/1 10:28 AM Page 2
34) Place the handset on the base. Be sure there is sufficient space toraise the base antenna to a vertical position.NOTE: Use only the Uniden Battery (BT-905) supplied with yourphone. Replacement batteries are also available through theUniden Parts Department.Battery use time (per charge)From fully charged• Seven hours continuous use• Fourteen days when the handset is in the standby modeLow Battery AlertWhen the battery pack is very low and needs to be charged, the phoneis programmed to eliminate functions in order to save power. If thephone is not in use, the talk/batt low LED flashes when the battery packis low.If the phone is in use, the talk/batt low LED flashes and the handset beeps. Complete yourconversation as quickly as possible and return the handset to the base for charging.Cleaning the Battery Charging ContactsTo maintain a good charge, it is important to clean the battery contactson the handset and base unit with a dry cloth or a pencil eraser aboutonce a month. Do not use any liquids or solvents.NOTE: Even when the battery pack is not being used, it will graduallydischarge over a long period of time. For optimum performance, besure to return the handset to the base unit after each telephone call.C. Connect the base unit1) Connect the AC adapter to the DC IN 9V jack and astandard 120V AC wall outlet.2) Wrap the cord inside the molded wiring channel as shown.3) Set the base unit on a desk or tabletop, and place thehandset on the base unit.4) Make sure the status LED illuminates. If the LED does notilluminate, check to see that the AC adapter is plugged inand the handset makes good contact with the basecharging contacts.NOTICE: Place the power cord so it does not create a trip hazard or where it could become chafedand create a fire or electrical hazard.NOTES:•Use only the supplied AD-310 AC adapter. Do not use any other AC adapter.•Connect the AC adapter to a continuous power supply.•Place the base unit close to the AC outlet so that you can unplug the AC adapter easily.After installing the battery pack in the handset, charge your handset at least 15-20 hours beforeplugging into the phone line. Once the handset battery pack is fully charged, connect thetelephone line cord to the base and telephone wall outlet.EXP2240 12/19/1 10:28 AM Page 3
Making and Receiving CallsNOTES: • The redial/p key redials the last number dialed.• The redialed number can be up to 24 digits long.5) Connect the telephone line cord to the TEL LINE jack and atelephone outlet once the handset is fully charged.TIP: If your telephone outlet isn’t modular, contactyour telephone company for assistance.D. Choose the dialing modeMost phone systems use tone dialing which sends DTMF tones through the phone lines. Howeversome phone systems still use pulse dialing such as in rural areas. The default setting is tone dialing.Depending on your dialing system, set the mode as follows:1) Press and hold flash until you hear a confirmation tone.2) To set the dial mode for pulse dialing, press #. Or to set the dial mode for tone dialing, press*/tone. A confirmation tone sounds to indicate the setting is complete.• If you are not sure of your dialing system, set for tone dialing. Make a trial call. If the call connects,leave the setting as is, otherwise set for pulse dialing.• If your phone dialing system requires pulse dialing and you need to send DTMF tones for certainsituations during a call, you may “switch-over” to tone dialing. (Refer to “Tone Dialing Switch-over”).NOTE: Make sure your battery pack is fully charged before choosing the dial mode.4Handset On BaseAnswer call When the phone rings, remove thehandset from the base. (AutoTalk)1) Remove the handset from the base andpress talk.Make call 2) The talk/batt low LED flashes andturns on.3) Listen for the dial tone.4) Dial the number.Hang up Return handset to the base. (AutoStandby)1) Remove the handset from the base andpress talk.Redial 2) Listen for the dial tone.3) Press redial/p to dial the last dialednumber.Ringer Mute 1) Remove the handset from the base.2) Press end when ringing. (AutoTalk OFF)ModularUsing Your PhoneHandset Off BasePress talk, any number key, */tone, or #.1) Press talk.2) The talk/batt low LED flashes andturns on.3) Listen for the dial tone.4) Dial the number.Press end.1) Press talk.2) Listen for the dial tone.3)Press redial/pto dial the last dialednumber.Press endwhen ringing.EXP2240 12/19/1 10:28 AM Page 4
5TerminologyThroughout this manual, terms such as Standby and Talk Mode are used. Below is the terminologyexplanation.•Standby Mode - The handset is not in use, off the base, and talk has not been pressed. A dialtone is not present.•Talk Mode - The handset is off the base and talk has been pressed enabling a dial tone.Adjusting the Ringer and Earpiece VolumeRinger toneWhen the phone is in standby mode, pressing the v key on the handset selects the handset ringertone. There are two ringer tones. Continue pressing the v key to listen to all tones. The phone keepsthe last ringer tone setting selected.Earpiece volumeThe handset earpiece volume settings (Low, Medium and High) can only be adjusted during a call.Press v repeatedly to select Low, Medium and High. When you hang up, the phone keeps the lastvolume setting selected.Ringer MuteThe end key can be used to temporarily mute the ringer tone. When the handset is off the base andthe phone is ringing, press the end key and the ringer tone will be temporarily silenced. The ringertone will return to normal starting with the next incoming call.Tone Dialing Switch-overSome telephone companies use equipment that requires pulse dialing(sometimes referred to as rotary dialing). If you need to enter tone dialing digits,you can switch-over to tone dialing during the call. For example, entering yourbank account number after you have called your bank.Initially make your call with the pulse dialing mode. Once your call connects,press */tone. Enter the desired number. These digits will be sent as tonedialing. This special number can be stored in a memory location. This isreferred to as Chain Dialing. Once the call ends, the tone mode is canceled and pulse dialing moderesumes.NOTE: The tone feature only applies when the dial mode is set to pulse.Traveling Out-of-RangeDuring a call, as you begin to move your handset too far from your base unit, noise increases. If youpass the range limits of the base unit, your call will terminate within 1 minute.Selecting a Different ChannelIf you encounter interference while using your phone, you can manually change the phones channelfor clear operation. This function works only when the phone is in use.Press channel. The talk/batt low LED flashes, indicating the phone is changing to another channel.EXP2240 12/19/1 10:28 AM Page 5
6PageTo locate the handset (while it’s off the base), press find handset on the base. The handset beeps for 60seconds.Paging is canceled when pressing any key, find handset on the base or return the handset to thebase.Flash and Call WaitingIf you have “call waiting” service and a call waiting tone sounds while you areon a call, press flash to accept the waiting call. There is a short pause, thenyou will hear the new caller. To return to the original caller, press flash again.NOTE: You must subscribe through your local telephone company to receiveCall Waiting Service.Storing a Phone Number in MemoryYour EXP2240 Series phone has 10 memory locations for storing importanttelephone numbers.1) Remove the handset from the base.2) Press m. The talk/batt low LED flashes.3) Enter the phone number, up to 16 digits. If a pause is needed during thedialing sequence, press redial/p to insert a pause. Each pause counts as adigit and represents a two second delay in time between digits as they aresent.4) Press magain.5) Enter the memory location (0-9) on the keypad. Memory 1 is reserved forRocketDial. You can store data in this location by pressing 1. A tone indicates that the number isstored. If you enter a number in a location that has a previously stored number it will overwrite theexisting number without warning.NOTES: • The pause button counts as one digit. Pressing redial/p more than once increases thelength of pause between numbers.•You have 30 seconds after pressing mto enter the number you wish to store. Otherwise,you will hear a rapid beep.•You cannot store numbers in RocketDial.Dialing a Stored NumberUsing the memory location features1) Press talk, then press m.2) Enter the memory location (0-9) on the keypad. The stored number automatically dials.NOTE: If you select a memory location that does not have a stored number, the handset will beeprapidly and the phone will not dial.EXP2240 12/19/1 10:28 AM Page 6
7One-touch RocketDialYour phone is equipped with “One-touch RocketDial” for instant dialing. It isused to dial the phone number stored in memory location 1. (See “Storing aPhone Number in Memory”.)To instantly dial the phone number stored in memory location 1, simply pressRocketDial. (There is no need to press talk. The phone will automatically dial.)If you press RocketDial, and a phone number is not stored in memory location1, the phone will beep rapidly and will not dial.Chain DialingThe memory locations on the handset are not limited to phone numbers. You can also store a group ofnumbers (up to 16 digits) that you need to enter once your call connects. This is referred to as ChainDialing.An example of this is a bank account number. Once you have called your bank, and are prompted to enterthe account number, simply press mand the location number where the special number has been stored.Store your special number in memory as you would a phone number. (Refer to “Storing a PhoneNumber in Memory”.)Erasing a Stored Number from Memory1) Remove the handset from the base unit.2) Press mtwice.3) Press the memory location (0-9). A tone indicates that the stored number is erased from memory.NOTE: You cannot erase the phone numbers by using the RocketDial. This is the number stored inmemory location 1.Changing the Digital Security CodeThe digital security code is an identification code used to connect the handset and the base unit.Normally, setting the code is not necessary.The first time you charge your handset, the security code is automatically set. In the rare situation thatyou suspect another cordless telephone is using the same security code, you can change the code.1) Remove the handset from the base unit. Press and hold find handset on the base.2) The handset begins emitting a paging sound. While holding find handset for at least 3 seconds,place the handset on the base unit. The paging sound stops. Leave the handset on the base formore than 3 seconds. A new random security code is set.NOTE: If the handset battery pack is completely discharged or the battery pack is removed, the digitalsecurity code will be lost. If this happens, a new security code is set automatically next timethe battery pack is charged.EXP2240 12/19/1 10:28 AM Page 7
8TroubleshootingIf your EXP2240 Series cordless telephone is not performing to your expectations, please try thesesimple steps.NOTE: Do not attempt to service this unit yourself. Servicing must be performed by qualifiedpersonnel.SymptomThe status LED won’t illuminate when the handset is placed in the base.The audio sounds weak and/or scratchy.Can’t make or receive calls.Handset doesn’t ring or receive a page.Severe noise interference If you still have a problemSuggestion• Make sure the AC adapter is plugged into the base and wall outlet.• Make sure the handset is properly seated in the base.• Make sure that the charging contacts on the handset and on thebase are clean.• Move the handset and/or base to a different location away frommetal objects or appliances and try again.• Press channel to help eliminate background noise.• Check both ends of the telephone line cord.• Make sure the AC adapter is plugged into the base and a walloutlet.• Make sure that the base antenna is in the vertical position.• Disconnect the AC adapter for a few minutes, then reconnect it.• Change the digital security code. (See page 7)• Make sure that the handset is not too far from the base.• The Nickel-Cadmium battery pack may be weak. Charge the batteryfor 15-20 hours.• The handset may be too far away from the base.• Place the base away from appliances or metal objects.• Change the digital security code. (See page 7)• Keep the handset away from microwave ovens, computers, remotecontrol toys, wireless microphones, alarm systems, intercoms, roommonitors, fluorescent lights, and electrical appliances.• Move to another location or turn off the source of interference.• Call our customer hotline at 1-800-297-1023EXP2240 12/19/1 10:28 AM Page 8
9Precautions!Before you read anything else, please observe the following:Warning!Uniden America Corporation DOES NOT represent this unit to bewaterproof. To reduce the risk of fire, electrical shock, or damage to theunit, DO NOT expose this unit to rain or moisture. Rechargeable Nickel-Cadmium Battery Warning• This equipment contains a rechargeable nickel-cadmium battery.• Cadmium is a chemical known to the State of California to causecancer.• The rechargeable nickel-cadmium battery contained in this equipmentmay explode if disposed of in a fire.•Do not short-circuit the battery.• Do not charge the rechargeable nickel-cadmium battery used in thisequipment in any charger other than the one designed to charge thisbattery as specified in the owner’s manual. Using another charger maydamage the battery or cause the battery to explode.Rechargeable Nickel-CadmiumBatteries Must Be Recycled orDisposed of Properly• Uniden voluntarily participates in an RBRC®industry program to collect and recycle nickel-cadmium batteries atthe end of their useful life, when taken out of service within theUnited States. The RBRC® program provides a convenient alternativeto placing used nickel-cadmium batteries into the trash or municipalwaste stream, which is illegal in some areas.• Through the RBRC® program, Uniden makes it easy for you to drop offthe used battery at local retailers of replacement nickel-cadmiumbatteries. You may also contact your local recycling center forinformation on where to return the used battery. Please call 1-800-8-BATTERY for information on Ni-Cd battery recycling in your area.Uniden's involvement in this program is part of its commitment toprotecting our environment and conserving natural resources.• RBRC® is a registered trademark of the Rechargeable Battery RecyclingCorporation.Important Safety InstructionsWhen using your telephone equipment, these basic safety precautionsshould always be followed to reduce the risk of fire, electrical shock, andinjury to persons:1. Read and understand all instructions.2. Follow all warnings and instructions marked on the product.3. Unplug this product from the wall outlet before cleaning. Use a drycloth for cleaning without liquid or aerosol cleaners.4. Do not use this product near water; for example, near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement, or near aswimming pool.5. Do not place this product on an unstable cart, stand, or table. Thetelephone may fall, causing serious damage to the unit.6. Slots and openings in the cabinet and the back or bottom areprovided for ventilation. To protect the product from overheating,these openings must not be blocked or covered. This product shouldnever be placed near or over a radiator or heat register. This productshould not be placed in a built-in installation unless properventilation is provided.7. This product should be operated only from the type of power sourceindicated on the marking label. If you are not sure of the type ofpower supply to your home, consult your dealer or local powercompany.8. Do not allow anything to rest on the power cord. Do not locate thisproduct where the cord will be damaged by persons walking on it.9. Do not overload wall outlets and extension cords, as this can result inthe risk of fire or electrical shock.10. Never push objects of any kind into this product through cabinetslots, as they may touch dangerous voltage points or short out partsthat could result in a risk of fire or electric shock. Never spill liquid ofany kind on the product.11. To reduce the risk of electric shock, do not disassemble this product.Take it to qualified service personnel when service or repair work isrequired. Opening or removing covers may expose you to dangerousvoltages or other risks. Incorrect reassembly can cause electric shockwhen the appliance is subsequently used.12. Unplug this product from the wall outlet and refer servicing toqualified service personnel under the following conditions:A. When the power supply cord is damaged or frayed.B. If liquid has been spilled into the product.C. If the product has been exposed to rain or water.D. If the product does not operate normally when following theoperating instructions. (Adjust only those controls that arecovered by the operating instructions. Improper adjustment ofother controls may result in damage and will often requireextensive repair work by a qualified technician.)E. If the product has been dropped or the cabinet has beendamaged.F. If the product exhibits a distinct change in performance.13. Do not use the telephone to report a gas leak in the vicinity of theleak.Additional Battery Safety PrecautionsCaution! To reduce the risk of fire or injury to persons by thebattery, read and follow these instructions:1. Use only the Uniden battery pack specified in the owner’s manual. 2. Do not dispose of the battery pack in a fire. The cell may explode.Check the nickel-cadmium battery disposal package insert for disposalinstructions.3. Do not open or mutilate the battery pack. Released electrolyte iscorrosive and may cause damage to the eyes or skin. It may be toxicif swallowed.4. Exercise care in handling the battery in order not to short the batterywith conducting materials such as rings, bracelets, and keys. Thebattery or conductor may overheat and cause burns.5. Charge the battery pack provided with or identified for use with thisproduct only in accordance with the instructions and limitationsspecified in the owner’s manual provided for this product.6. Observe proper polarity orientation between the battery pack andbattery charger.SAVE THESE INSTRUCTIONS!Important Electrical ConsiderationsUnplug all electrical appliances when you know an electrical storm isapproaching. Lightning can pass through your household wiring anddamage any device connected to it. This phone is no exception.Warning!Please do not attempt to unplug any appliance during an electricalstorm.The FCC Wants You To KnowChanges or modifications to this product not expressly approved byUniden, or operation of this product in any way other than as detailed bythe owner’s manual, could void your authority to operate this product.The equipment cannot be used on public coin phone service provided bythe telephone company. Connection to party line service is subject tostate tariffs. (Contact the state public utility commission, public servicecommission or corporation commission for information.)RangeYour new phone is designed to achieve the maximum possible range bytransmitting and receiving according to the highest specifications setforth by the FCC. We have rated this phone to operate at a maximumdistance with the qualification that the range depends upon theenvironment in which the telephone is used. Many factors limit range,and it would be impossible to include all the variables in our rating. TheMaximum Range rating of this phone is meant to be used as a means ofcomparison against other range claims.Telephone Line ProblemsThe FCC has granted the telephone company the right to disconnectservice in the event that your phone causes problems on the telephoneline. Also, the telephone company may make changes in facilities andservices which may affect the operation of your unit. However, yourtelephone company must give adequate notice in writing prior to suchactions to allow you time for making necessary arrangements to continueuninterrupted service.If you are having trouble with your telephone service, you must firstdisconnect your phone to determine if it is the cause of your problem. Ifyou determine that it is the cause, you must leave it disconnected untilThe exclamation point within an equilateral triangle isintended to alert the user to the presence of importantoperating and maintenance (servicing) instructions inthe literature accompanying the appliance.EXP2240 12/19/1 10:28 AM Page 9
10the trouble has been corrected.Radio InterferenceRadio interference may occasionally cause buzzing and humming in yourcordless handset, or clicking noises in the base. This interference iscaused by external sources such as TV, refrigerator, vacuum cleaner,fluorescent lighting, or electrical storm. Your unit is NOT DEFECTIVE. Ifthese noises continue and are too distracting, please check around yourhome to see what appliances may be causing the problem. In addition,we recommend that the base not be plugged into a circuit that alsopowers a major appliance because of the potential for interference. Becertain that the antenna on the unit is fully extended when needed.In the unlikely event that you consistently hear other voices ordistracting transmissions on your phone, you may be receiving radiosignals from another cordless telephone or other source of interference. Ifyou cannot eliminate this type of interference, you need to change to adifferent channel.Finally, it should be noted that some cordless telephones operate atfrequencies that may cause interference to nearby TVs and VCRs. Tominimize or prevent such interference, the base of the cordless telephoneshould not be placed near or on top of a TV or VCR. If interference isexperienced, moving the cordless telephone farther away from the TV orVCR will often reduce or eliminate the interference.More Than One Cordless TelephoneIf you want to use more than one cordless telephone in your home, theymust operate on different channels. Press the channel key to select achannel that provides the clearest communication.Cordless Telephone PrivacyCordless telephones are radio devices. Communications between thehandset and base of your cordless telephone are accomplished by meansof radio waves which are broadcast over the open airways. Because of theinherent physical properties of radio waves, your communications can bereceived by radio receiving devices other than your own cordlesstelephone unit. Consequently, any communications using your cordlesstelephone may not be private.Installation ConsiderationsSelecting a LocationBefore choosing a location for your new phone, there are some importantguidelines you should consider:• The location should be close to both a phone jack and continuouspower outlet. (A continuous power outlet is an AC outlet which doesnot have a switch to interrupt its power.)• Keep the base and handset away from sources of electrical noise suchas motors or fluorescent lighting.• Be sure there is sufficient space to fully extend the base antenna.• The base can be placed on a desk or tabletop or mounted on astandard telephone wall plate.• You should charge your new phone for 15-20 hours before completingthe installation or using the handset.Telephone Line OutletsThere are two types of phone outlets:Modular JackMost phone equipment available now uses modular jacks. Phone cords arefitted with a molded plastic connector which plugs into this type of jack.If you do not have modular phone jacks, contact your local telephonecompany for information about their installation.Hardwired JackSome equipment is wired directly to a phone jack, and these types ofinstallations require a modular jack converter. This type of installation isnot difficult; however, you should contact your Uniden telephone dealeror a telephone supply store for advice about the proper adapter orconverter for your particular situation.Connecting the Telephone CordsConsider these safety guidelines before connecting the telephone cords:Caution!• Never install telephone wiring during a lightning storm.• Never touch uninsulated telephone wires or terminals unless thetelephone line has been disconnected.• Use caution when installing or modifying telephone lines.Applying Power to the BaseThis phone requires an AC outlet, without a switch to interrupt power,and the included AC adapter. To relieve strain on the DC plug when thephone is placed on a desk or table, wrap the power cord around thestrain relief notch on the bottom of the base.NOTE: Place the power cord so that it does not create a triphazard, or where it could become chafed and create a fireor other electrical hazards.Adapter Safety FeaturesIf the AC adapter furnished with this phone has apolarized line plug (a plug having one blade widerthan the other), this plug will fit into the poweroutlet only one way. If you are unable to insertthe plug fully into the outlet, try reversing theplug.Do not alter the shape of the blades of thepolarized plug!NOTE: If you cannot plug the AC adapter into the outlet, contactsomeone about replacing the outlet.Plug the AC Adapter into a standard 120 VAC wall outlet. Do not use an outlet controlled by a wall switch.Use only the Uniden AC Adapter supplied with this phone.One Year Limited WarrantyImportant:Evidence of original purchase is required for warrantyservice.WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”)ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the originalretail owner, this Uniden Product to be free from defects in materials andcraftsmanship with only the limitations or exclusions set out below.WARRANTY DURATION: This warranty to the original user shall terminateand be of no further effect 12 months after the date of original retailsale. The warranty is invalid if the Product is (A) damaged or notmaintained as reasonable or necessary, (B) modified, altered, or used aspart of any conversion kits, subassemblies, or any configurations not soldby Uniden, (C) improperly installed, (D) serviced or repaired by someoneother than an authorized Uniden service center for a defect ormalfunction covered by this warranty, (E) used in any conjunction withequipment or parts or as part of any system not manufactured by Uniden,or (F) installed or programmed by anyone other than as detailed by theowner’s manual for this product.STATEMENT OF REMEDY: In the event that the product does not conformto this warranty at any time while this warranty is in effect, warrantorwill either, at its option, repair or replace the defective unit and return itto you without charge for parts, service, or any other cost (exceptshipping and handling) incurred by warrantor or its representatives inconnection with the performance of this warranty. Warrantor, at itsoption, may replace the unit with a new or refurbished unit. THE LIMITEDWARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTYPERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALLOTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS,IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOTLIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESSFOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER ORPROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL ORCONSEQUENTIAL DAMAGES. Some states do not allow this exclusion orlimitation of incidental or consequential damages so the above limitationor exclusion may not apply to you.LEGAL REMEDIES: This warranty gives you specific legal rights, and youmay also have other rights which vary from state to state. This warrantyis void outside the United States of America.PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, afterfollowing the instructions in the owner’s manual you are certain that theProduct is defective, pack the Product carefully (preferably in its originalpackaging). The Product should include all parts and accessoriesoriginally packaged with the Product. Include evidence of originalpurchase and a note describing the defect that has caused you to returnit. The Product should be shipped freight prepaid, by traceable means, towarrantor at:Uniden America CorporationParts and Service Division4700 Amon Carter Blvd. Fort Worth, TX 76155(800) 297-1023, 8 a.m. to 5 p.m. Central, Monday through FridayEXP2240 12/19/1 10:28 AM Page 10
UCZZ01357ZEXP2240 12/19/1 10:28 AM Page 12

Navigation menu