Uniden America UH052 Security (Cellular) Telephone User Manual Draft Copy of Owners Manual

Download:
Mirror Download [FCC.gov]
Document ID	44173
Application ID	aNygxP0GSGyJ5al//g201g==
Document Description	Draft Copy of Owners Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	44.92kB (561517 bits)
Date Submitted	1999-06-25 00:00:00
Date Available	1999-10-06 00:00:00
Creation Date	1999-06-17 09:26:27
Producing Software	Photoshop PDF Plug-in 1.0
Document Lastmod	1999-06-17 09:26:56
Document Title	Draft Copy of Owners Manual
Document Creator	Photoshop PDF Plug-in 1.0

User Manual
DRAFT COPY OF THE INSTRUCTION MANUAL
UHOSZZ—ZZ 10
Security Phone User Interface Operation Specification
Document # 6350-1002
Revision Hism
Revision Issue Date Originator Description
01 10/16/98 C. Sakuma Initial Release
1.0 03/08/99
03/15/99 R. Inuzuka Revised in DDC
03/16/99
R. Inuzuka Rew'sed u- -n reviews in DDC
Uniden America Corporation
Copyright © 1999 Uniden America Corp. All rights reserved.
14qu -. q] ,
Security Phone U1 Operation Specification Rev. 1.2
Document II 6350-1002
Table of Contents
1. Overview
1.1 Functional View of Phone
1.2 Indications
13 Keys
1.4 Tones
1.5 Feature List
2. Operation
2.1 Power Down Mode
2.2 Emergency Call Mode
2.3 Panic Mode
2.4 Signal Indicator Mode
2.5 Test Mode (for Factory use only)
3. Cellular Phone Parameters
mamhhawwwwmw
Uniden America Corp. Proprietary 1
Security Phone UI Opmlion Specification Rev. 1.2
Document it 6350-1002
1. Overvievgv
1.1 Functional View of Phone
The following figure is a simplified functional view of the phone to show what kind of
keys, indications etc on the phone, and the actual appearance of the phone is different
from this figure.
Antenna
Ear Speaker Panic Siren Speaker
In Use LED I
(YELLOW)
R A t
> L (Um) “($0311 )
Key I I
Signal Slrenglh 3:51:ch LED
LED (RED) (G
911 Key Microphone
Uniden‘An-ericoébmrl’roprietary 2
Security Phone Ul Operation Speeifimiion Rev. 1.2
Document # 6350-1002
1. Indication:
Indication Functions '
In Use LED Flashing Yellow: Indicates a call is in progress
Solid Yellow: Indicates a call is established.
513“ Strength LED Indicate the signal strength:
Red Signal too weak or No service
Green: Si_ al is acne-table or stron_
1.3 Keys
__
911] Emer- 11 01110114: hon
[L1 (Lem Signai Strength indication
Panic Siren activated in con'unction with R ke
m m
Panic Siren activated in con uncuon With L ke
Note: Keys are activated when push for 1 second, and functions are de-activated in
toggle model
1.4 Tones
Panic siren seaker
Bec- whenanemenenc unis established
1.5 Feature List
—zz_—m_
Signal Strength Indication LED signal strenfiindication
Battery low Indication All LEDS flashing and low level Panic Siren beeping
until batte dies
Uniden America Corp Proprietary 3
Security Phone UI Operation Specification Rev. 1.2
Document II 6350-1002
2. Operation
There are 5 distinctive modes of operation in the phone:
' Power down mode
- Emergency Call mode
' Panic mode
' Signal Indication mode
' Test mode
This section describes the operation of each mode.
2.1 Power Down Made
In Power down mode, all of the phone’s circuits are turned off to conserve the battery.
The battery life will be the standard shelf Live of the alkaline batteries, typically 1 year,
As the panic phone will be mostly stored in an unattended manner, active battery
condition monitoring will deplete battery life very significantly without good
operational advantage. The design for maximum battery life with user activated self-test
is considered to be most optimum.
In power—down mode, the phone waits for a key press and enters other mode based on
the entered key sequence
2.2 Emergency Call Mode
When the phone is in Power down mode, holding the [911] key for 1 second will place
an emergency call.
When the phone is powered on, it will turn on all LEDs first for is and then turn them
offt And then the phone makes a pacifier beep for 055.
If the Signal strength is too weak to originate a call, Signal Indicator LED (Red) will be
lit and the phone will enter Signal Indicator mode. If the Signal Strength is acceptable,
the Signal indicator LED (Green) will be lit and the phone will enter Emergency Call
mode. Then, the phone will originate an emergency call to the number stored in the
phone‘s memory (Factory default is “911”). The In Use LED will begin flashing and if a
call is established, the In Use LED will be lit solid, and the microphone and car speaker
will be enabled. A pacifier beep will be sounded
Pressing and holding the [L] and [R] keys simultaneously for 1 second will turn on the
panic siren if the emergency call has not been already established. The panic siren will
be turned of when the emergency call is established. It the phone fails to establish a call,
Uniden America Corp Proprietary 4
Security Phone Ul Operation Specification Rev‘ 1.2
Document If 6350-1002
the panic siren will continue until the [L] and [R] keys simultaneously for 1 second and
the siren is turned oft
In case a call attempt fails, the phone will continuously attempt to make'a call with the
flashing (0.55 interval) “In Use” LED (Yellow) until it establishes a call. When a call is
established, the “In Use” LED turns to solid yellowl
anseLED !
(Yellow) is Sign! Slims“! In Use LED
flashing G 13150 (Gwen) is " (Yellow)
lit mines sand.
21) 00 ‘:> “00
Hold [9111 key cm
[at 1 sec, D Established D
e o
mm mm mm
After a call is established, when the [911] key is held for 1 second or the other party
hangs up, the call will be released, the In Use and Signal Strength Indicator LED’s will
be turned off, and the phone will then go back to Power Down mode.
When the battery goes low during a call, all LEDs will start flashing. Intermittent
Pacifier Beep tone is audible. The panic phone will continue its normal operation until
the battery power is exhausted. If the panic phone operation is deactivated, all LED will
still continue to flash until the battery is exhausted:
If the battery goes law without a call has been established, all LEDs will continue
flashing and low level Panic Siren beeping until battery is exhausted.
Battery Baltery
D law ID] Exhausted D]
o o e
Cammum mum [MM-Mini:
When a call is established, the ear speaker volume is set to “Normal” level. The
volume can be adjusted by pressing the [L] key. Pressing the [L] key will switch the
volume between “Normal” (-6dB) and “High” (OdB).
Unlden America Corp. Proprietary 5
Security Phone UI Operation Specification Revi 1.2
Document If 6350-1002
2.3 Panic Mode
When the phone is in Power Down mode or Signal Indicator mode, pressing and'
holding the [L] and [R] keys simultaneously for 1 second will turn on the panic siren.
When the phone is powered on, it will turn on all LEDs first for Is and then turn them
off.
Then the panic siren will start and the phone will enter Panic mode.
Pressing and holding the [L] and [R] keys simultaneously for 1 second again will turn
0)?" the panic siren.
* I
[1-1 by [R] key ' ‘ o o 0
a -=> |:(> E>
Hold [L] and [a] non [L] ma [R] D
keystarlsec. keysforlsec.
mm mm mm
While the panic siren is active, holding the [911] key for 1 second will place an
emergency call. The panic'siren will be turned off if the call is established. Ifthe Signal
strength is too weak to originate a call, Signal Indicator LED (Red) will be lit, the phone
will enter Signal Indicator mode. Ifthe Signal Strength is acceptable, the Signal
Indicator LED (Green) will be lit and the phone will enter Emergency Call mode.
‘ I
* 0
E75 000
El
Hold [9111 key
(or 1 sec.
WM
2.4 Signal Indicator Mode
When the phone is in Power Down mode, holding the [L] key or the [R] key for 1
second will let the phone do the self-testt
Unide‘n America Corp. Proprietary 6
Security Phone U1 Operation Specifiwion Rev. 1.2
Document It 6350-1002
In the self test, the phone will first turn on all LEDs for Is and then turn off all LEDs,
next, the phone will make a pacifier beep for 055 and then make a low volume Siren
beep for (ISs. Then the phone will enter Signal Indicator mode.
The phone will turn on the signal indicator. The color of the signal indicator LED
represents the signal strength as follows:
Color of LED Si al Stren th
The signal indicator will be turned off automatically 10 seconds after the Signal
indication [ED is turned on and the phone will then go back to Power Down mode
E1) |:> ° ° 0
Hold [L] key or 10 wands
m key for l m. Me'l-EDM U
lumnd mi
mm M Wm
While the signal indicator is active, the phone will check the battery level. If low battery
is detected, all LEDs will be flashing and low level Panic Siren will be beeping until
battery is exhausted. This is to ensure that the user replaces the batteries. The user can
remove the batteries at any time.
During the signal indicator mode, holding the [911] key for 1 second will place an
emergency call as before. The phone will enter Emergency Call mode.
o o o t::>
Hold[9ll]k=y
forlsetz
s‘ I .
While the signal indicator is active, pressing and holding the [L] and [R] keys
simultaneously for 1 second will turn on the panic siren. The panic siren will start, and
the phone will enter Panic mode as before.
Uniden America Corpidl’roprietary 7
Security Phone U1 Operation Specification Rev. 1.2
Document 3 63501002
! I
Q Q O >
o o o o o o
Hold[L]&[R|
keysroxmc,
I]:ll IEI]
S. ”A “N E .“
2.5 Test Mode (for Factory use only)
There is a test connection located on the bottom of the phone. Two pins of the test
connection are used to put the phone into Test mode. One is EXTSENSE pin and the
other is TEST pin.
When a test fixture is connected to the test connection and EXT-SENSE or TEST pin
(or both) are active (active low), press any key will power up the phone and the phone
will do the self test.
In the self test, the phone will first turn on all LEDs for Is and then turn off all LEDs,
next the phone will make a pacifier beep for 055 and then make a low volume Siren
beep for 0.55. Then the phone will enter Test mode.
° Tut lellfle
E D m EXTSENSE Made
Made a: fist pin
active
In the test mode, the phone will check signal strength and battery level all the time, if
signal strength is too weak, signal indicator Red LED will be lit, if signal strength is
acceptable, signal indicator Green LED will be lit Ifbattery low is detected, all LEDs
will be flashing and low volume Siren beep will be sounded.
If the [911] key was pressed (holding the key for 1 second is not required), the phone
will originate a call to the number stored in the phone’s memory The In Use LED will
begin flashing and if a call is established, the In Use LED will be lit solid, 8 pacifier
beep will be sounded and the audio path will be set based on the status of the EXT-
SENSE and TEST pin.
EXTSENSE in TEST in Audio Path
Uniden America Corp, Proprietary 8
Security Phone U1 Operation Specification Rev. 1.2
Document # 6350-1002
Active | Microphone and ear speaker enabled
Inactive Microphone and ear speaker disabled,
and Audio uath routed to the test fixture
Microhone and ear 5 neaker enabled
If a call attempt fails for some reason, the In Use LED will be flashing until the call is
established
After a call is established, when the [9111 key is pressed (holding the key for 1 second is
not required) or the other party hangs up, the call will be released, the In Use LED will
be turned off and the phone will remain in Test mode.
When the test fixture is removed or EXT-SENSE and TEST pins go inactive, the phone
will go back to Power Dow-n modei
Uniden America Corp. Proprietary 9
Security Phone U1 Operation Specification Rev. 1.2
Document # 6350-1002
3. Cellular Phone Parameters
The phone has a non-volatile memory'to store the cellular phone parameters.
These parameters are required to register to a cellular system, originate and receive a
call.
The following chart is a list of the proposed default values for the cellular phone
parameters.
Proosed default values
A unique serial number will be assigned to
each hone
One fixed number will be used
MIN : (IB) 456~7890, System : B,
SID : 20, IPCH : 334, ACCOLC : 15,
SCM : Class 111 + ZSMHz + No DTX,
GM:OO,LU:00,MH\IMark:01
B Prefer A
Attempt a call ofig'nation through B
S tem first If fails, t S tern A.
Will be initialized to all ‘0’5
“911"
Parameters
Electric Serial Number
Number Assignment Module
System Selection
Authentication Ke
Emergency Number
Uniden America Corp. Proprietary 10

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Modify Date                     : 1999:06:17 09:26:56
Creator                         : Photoshop PDF Plug-in 1.0
Producer                        : Photoshop PDF Plug-in 1.0
Create Date                     : 1999:06:17 09:26:27
Page Count                      : 12

EXIF Metadata provided by EXIF.tools