Uniden America UP001R Cordless Telephone - Handset User Manual EXP3240

Download:
Mirror Download [FCC.gov]
Document ID	292686
Application ID	yE5TBlEBhtcci3SvODcXGw==
Document Description	users manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	107.18kB (1339749 bits)
Date Submitted	2002-12-27 00:00:00
Date Available	2002-12-27 00:00:00
Creation Date	2002-12-27 14:47:52
Producing Software	Acrobat Distiller 4.0 for Macintosh
Document Lastmod	2002-12-27 14:48:11
Document Title	EXP3240
Document Creator	QuarkXPressª: AdobePS 8.5.1

EXP3240 12/18/2 11:06 AM Page 12
EXP3240 12/18/2 11:06 AM Page 1
Introduction
The Uniden EXP3240 Series (EXP3240/EXP3241) 2.4GHz cordless phones are designed
and engineered to exacting standards for reliability, long life, and outstanding performance.
NOTE: Some illustrations in this manual may differ from the actual unit for explanation
purposes. The color of your cordless phone may vary.
• 2.4 GHz Extended Range
Technology
• Pulse/Tone Dialing
• One Touch Rocket Dial™
Number
• Up to 7 Hours Talk Time
• 10-Number Memory
Dialing
• Handset Volume Control
• AutoTalk™
•
•
•
•
•
Up to 14 days Standby Time
20 Channel Autoscan
24 Digit Redial
AutoStandby™
Hearing Aid Compatible
▼ Features
The cordless phone features include AutoTalk and AutoStandby. AutoTalk allows you to
answer a call by just removing the handset from the base so you don’t have to waste time
pushing buttons. AutoStandby allows you to hang up by simply returning the handset to the
base.
The UltraClear Plus™ true compander circuitry virtually eliminates background noise.
This innovative technology, together with 20 different channels, provides you with the best
possible reception during all your conversations.
To protect you against misbilled calls which might result from your phone being activated by
other equipment, the cordless phone has Random Code™ digital security which automatically
selects one of approx. 262,000 digital security codes for the handset and base. Also, the
AutoSecure™ feature electronically locks your phone when the handset is in the base.
Rocket Dial™ is a one-touch speed dial key that automatically dials your most important or
frequently called number. The number dialed, is a preset number stored by the user.
Be sure to visit our web site: www.uniden.com
Uniden® is a registered trademark of Uniden America Corporation.
AutoTalk, AutoStandby, UltraClear Plus, Random Code, AutoSecure, and Rocket Dial are
trademarks of Uniden America Corporation.
As an ENERGY STAR® Partner, Uniden has determine that this product or
product models meets the ENERGY STAR® guidelines for energy
efficiency. ENERGY STAR® is a U.S. registered mark.
Controls and Functions
10
11
12
15
16
13
17
14
18
1. Handset antenna
2. Handset earpiece
3. talk/batt low LED - indicates when
phone is in use or the battery is low
4. flash - accesses call waiting (if available)
5. talk - answers or places calls
6. /tone - switches to tone dialing in pulse
dial mode
7. redial/p - redials the last number /
adds a timed pause in a memory
dialing sequence.
8. Handset Microphone
9. mem - enters or recalls numbers in
memory
10. Rocket Dial - one touch priority key
11. end - hangs up a phone call / mutes
the ringing tone temporarily
12. vol/ring - sets the ringer tone and
earpiece volume
13. channel - selects another channel for
clearer reception
14. Handset charging contacts
15. Base antenna
16. Charge / in use LED
17. find handset - locates the handset
18. Base charging contacts
EXP3240 12/18/2 11:06 AM Page 2
Included with Your Phone
• Base
• Handset
• AC Adapter
• Telephone Cord
• Rechargeable Battery
Setting up the Phone
Do the following steps:
A. Choose the best location
B. Install the rechargeable battery pack into the handset
A.
C. Connect the base unit
D. Choose the dialing mode
Choose the best location
Before choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS
included in the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS.
Here are some important guidelines you should consider:
Avoid noise sources such as a window
by a street with heavy traffic
Avoid heat sources, such as
radiators, air ducts, and sunlight
Avoid microwave ovens
Avoid television sets and
other electronic equipment
Avoid excessive moisture,
extremely low temperatures,
dust, mechanical vibration,
or shock
Avoid personal computers
Choose a central location
Avoid other cordless telephones
• Be sure there is sufficient space to raise the base antenna to a vertical position.
• The location should be close to both a phone jack and a continuous power outlet which
is not switchable.
• Keep the base and handset away from sources of electrical noise such as motors and
fluorescent lighting.
• The base can be placed on a desk, tabletop, or mounted on a standard wall plate.
B. Install the rechargeable battery pack into the handset
The handset is powered by a rechargeable battery pack. The battery recharges
automatically when the handset is placed in the base unit.
Charge the handset battery pack for at least 15-20 hours before using your new cordless
telephone for the first time! To maximize the charge capacity of your battery pack, DO NOT
plug the telephone cord into the base unit and wall jack until the battery is fully charged.
NOTE: If your home has specially wired alarm equipment connected to the telephone line, be
sure that installing the system does not disable your alarm
equipment. If you have questions about what will disable your
alarm equipment, contact your telephone company or a qualified
installer.
1) Press down on the handset battery case cover (use the finger
indention for a better grip) and slide the cover downward to remove.
2) Plug the battery pack connector (red & black wires) into the small,
black jack inside the battery compartment (the connector notches fit
into the grooves of the jack only one-way). Match the wire colors to
the polarity label in the battery compartment, connect the battery and
listen for a click to insure connection.
3) Make certain you have made a good connection by slightly pulling on
the battery wires to insure that there is a secure connection.
If the battery connector is not securely connected, the handset will
not charge properly.
4) Place the battery case cover back on the handset by sliding it
upwards until it clicks into place.
EXP3240 12/18/2 11:06 AM Page 3
5) Place the handset in the base with the keypad facing
forward. Be sure there is sufficient space to raise the base
antenna to a vertical position.
NOTE: • Use only the Uniden Battery (BT-905) supplied
with your phone. Replacement batteries are also
available through the Uniden Parts Department at
(800) 554-3988, Monday thru Friday from 7:00 a.m.
to 5:00 p.m. or online at www.uniden.com
Battery use time (per charge)
From fully charged
• Up to seven hours continuous use
• Up to fourteen days when the handset is in the standby mode
Low Battery Alert
When the battery pack is very low and needs to be charged, the phone is programmed to
eliminate functions in order to save power. If the phone is not in use, the talk/batt low LED
flashes when the battery pack is low.
If the phone is in use, the talk/batt low LED flashes and the handset beeps. Complete your
conversation as quickly as possible and return the handset to the base for charging.
Cleaning the battery charging contacts
To maintain a good charge, it is important to clean the charging
contacts on both the handset and base unit once a month.
Use a dry cloth or a pencil eraser to clean. If the contacts
become very dirty, using water only, dampen a cloth to clean
the charging contacts. Then make sure to go back over the
charging contacts with a dry cloth before returning the handset
to the base to charge.
NOTE: Even when the battery pack is not being used, it will gradually discharge over a
long period of time. For optimum performance, be sure to return the handset to the
base unit after each telephone call.
C. Connect the base unit
1) Connect the AC adapter to the DC IN 9V jack
Route the cord.
and a standard 120V AC wall outlet.
2) Wrap the cord inside the molded wiring channel
as shown.
3) Set the base unit on a desk or tabletop, and
place the handset in the base unit.
4) Make sure the charge/in use LED illuminates.
If the LED does not illuminate, check to see that
the AC adapter is plugged in and the handset
makes good contact with the base charging
contacts.
NOTICE: Place the power cord so it does not create a trip hazard or where it could
become chafed and create a fire or electrical hazard.
NOTE: • Use only the supplied AD-446 AC adapter. Do not use any other AC
adapter.
• Connect the AC adapter to a continuous power supply.
• Place the base unit close to the AC outlet so that you can unplug the AC adapter
easily.
After installing the battery pack in the handset, charge your handset at least 15-20
hours before plugging into the phone line. Once the handset battery pack is fully
charged, connect the telephone line cord to the base and telephone wall outlet.
EXP3240 12/18/2 11:06 AM Page 4
5) Connect the telephone line cord to the TEL LINE
jack and a telephone outlet once the handset is
fully charged.
TIP:
If your telephone outlet isn’t
modular, contact your telephone
company for assistance.
Modular
D. Choose the dialing mode
Most phone systems use tone dialing which sends DTMF tones through the phone lines.
However some phone systems still use pulse dialing such as in rural areas. The default
setting is tone dialing. Depending on your dialing system, set the mode as follows:
1) Press and hold flash until you hear a confirmation tone.
2) To set the dial mode for pulse dialing, press #. Or to set the dial mode for tone dialing,
press /tone. A confirmation tone sounds to indicate the setting is complete.
• If you are not sure of your dialing system, set for tone dialing. Make a trial call. If the call
connects, leave the setting as is, otherwise set for pulse dialing.
• If your phone dialing system requires pulse dialing and you need to send DTMF tones
for certain situations during a call, you may “switch-over” to tone dialing (Refer to “Tone
Dialing Switch-over”).
NOTE: Make sure your battery pack is fully charged before choosing the dial mode.
Using Your Phone
Making and Receiving Calls
Handset On Base
Handset Off Base
When the phone rings, remove
Press talk, any number key, /tone,
Answer call the handset from the base
or # (AutoTalk).
(AutoTalk).
1) Remove the handset from
1) Press talk.
the base and press talk.
Make call 2) The talk/batt low LED
2) The talk/batt low LED flashes
flashes and turns on.
and turns on.
3) Listen for the dial tone.
3) Listen for the dial tone.
4) Dial the number.
4) Dial the number.
Hang up
Press end or return the handset to the base (AutoStandby).
1) Remove the handset from
1) Press talk.
the base and press talk.
Redial
2) Listen for the dial tone.
2) Listen for the dial tone.
3) Press redial/p to dial the last
3) Press redial/p to dial the last dialed
dialed number.
number.
Ringer Mute None
Press end when ringing.
NOTE:
• The redial/p key redials the last number dialed.
• The redialed number can be up to 24 digits long.
EXP3240 12/18/2 11:06 AM Page 5
Terminology
Throughout this manual, terms such as Standby and Talk Mode are used. Below is the
terminology explanation.
• Talk Mode - The handset is off the base and talk has been pressed enabling a dial
tone.
• Standby Mode - The handset is not in use, off the base, and talk has not been pressed.
A dial tone is not present.
Adjusting the Ringer and Earpiece Volume
Ringer tone
When the phone is in standby mode, pressing the vol/ring key on the handset selects the
handset ringer tone. There are two ringer tones. Continue pressing the vol/ring key to
listen to all tones. The phone keeps the last ringer tone setting selected.
Earpiece volume
The handset earpiece volume settings (Low, Medium and High) can only be adjusted during
a call. Press the vol/ring key repeatedly to select Low, Medium and High. When you hang
up, the phone keeps the last volume setting selected.
Ringer Mute
The end key can be used to temporarily mute the ringer tone. When the handset is off the
base and the phone is ringing, press the end key and the ringer tone will be temporarily
silenced. The ringer tone will return to normal starting with the next incoming call.
Tone Dialing Switch-over
Some telephone companies use equipment that requires pulse
dialing (sometimes referred to as rotary dialing). If you need to enter
tone dialing digits, you can switch-over to tone dialing during the call.
For example, entering your bank account number after you have
called your bank.
Initially make your call with the pulse dialing mode. Once your call
connects, press /tone. Enter the desired number. These digits will
be sent as tone dialing. This special number can be stored in a
memory location. This is referred to as Chain Dialing. Once the call
ends, the tone mode is canceled and pulse dialing mode resumes.
NOTE: The tone feature only applies when the dial mode is set to pulse.
Traveling Out-of-Range
During a call, as you begin to move your handset too far from your base unit, noise
increases. If you pass the range limits of the base unit, your call will terminate within
1 minute.
Selecting a Different Channel
If you encounter interference while using your phone, you can manually change the phone’s
channel for clear operation. This function works only when the phone is in use.
Press channel. The talk/batt low LED flashes, indicating the phone is changing to another
channel.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2002:12:27 14:48:11-05:00
Create Date                     : 2002:12:27 14:47:52-05:00
Title                           : EXP3240
Author                          : 
Creator                         : QuarkXPressª: AdobePS 8.5.1
Producer                        : Acrobat Distiller 4.0 for Macintosh
Page Count                      : 6

EXIF Metadata provided by EXIF.tools