Uniden America UP009R Cordless Telephone System User Manual EXT3165 01 22

Uniden America Corporation Cordless Telephone System EXT3165 01 22

users manual

Step 2 Install and Charge the Handset BatteryTO INSTALL THE HANDSET BATTERYWhen the handset battery pack is fully charged,after 15-20 hours of charging, plug the telephonecord into the base unit and then into a telephonewall jack. Your phone is set for tone dialing. If your localnetwork requires pulse dialing, please see“Choosing the dialing mode” on page 16.ARemove the cover.TO SET CALLER ID, LANGUAGE AND DIALING OPTIONSAPress and hold the cid/menu key.BPress the vol/ring/ or vol/ring/ keyto move the pointer to an option.CPress select to change the option setting.DPress end to exit, and return the handsetto the base.OPTIONS INCLUDEAAuto Talk On/OffBCIDCW On/Off(Caller id/call waiting)CArea Code Enter/RemoveDDial Pulse/ToneDPlug the AC adapter cord into the baseunit and then into a 120V AC outlet.EPlace the handset in the base and chargecontinuously for 15 - 20 hours before usingthe phone.BConnect the battery packconnector with the correct polarity.CReplace the cover.Note: Three Caller ID options are available: AutoTalk,Caller ID on Call Waiting (CIDCW), and Area Code. QUICK REFERENCE GUIDEStep 3 Connect to Phone LineStep 4Setting Display OptionsUniden Parts Department at(800) 554-3988Hours: M-F 8:00 a.m. to 5:00 p.m. CST. We can also be reached onthe web at www.uniden.comMake sure you have received the following items inthe package. If any of these items are missing ordamaged, contact the Uniden Parts Department.• Base unit• Handset• AC adapter• Rechargeable battery• Telephone cord• Beltclip• This Owner’s Manual• Other PrintedMaterialQUICK REFERENCE GUIDE [ 3 ]www.uniden.comStep 1 Checking the Package ContentsELanguage Eng (English)/Fr (French)EXT3165-01/22 1/22/03 7:37 PM Page 3
[ 4 ] www.uniden.comContentsQuick Reference Guide 3Welcome/Features 5Controls and Functions 6Getting StartedSetting up the Phone 8Mounting the Base Unit on a Wall 13Setting Menu Options 15BasicsMaking and Receiving Calls 18Adjusting the Handset Ringer and Earpiece Volume 19Redial 20Tone Dialing Switch-over 20Traveling Out-of-Range 20Selecting a Different Channel 21Page 21Flash and Call Waiting 21Memory DialingStoring Phone Numbers and Names 22Steps for Entering Names and Special Characters 24Making Calls with Memory Dialing 25Chain Dialing 26Editing a Stored Name and/or Phone Number 27Erasing a Stored Name and Phone Number 29VoiceMailUsing One Touch VoiceMail Access 31Caller ID FeaturesCaller ID 32When the Telephone Rings 32Viewing the Caller ID Message List 33Deleting Information from the Caller ID List 34Using the Caller ID List 36Additional InformationChanging the Digital Security Code 38Installing the Beltclip 38Headset Installation 38Note on Power Sources 39Maintenance 39Troubleshooting 40General Information 43Precautions & Warranty 44I.C. Notice 46Index 47EXT3165-01/22 1/22/03 7:37 PM Page 4
[ 5 ]www.uniden.comWelcome Congratulations on your purchase of the Uniden EXT3165 series. This cordless phone isdesigned and engineered to exacting standards for reliability, long life, and outstandingperformance.Note: Some illustrations in this manual may differ from the actual unit for explanation purposes. The color of your cordless telephone may vary.Be sure to visit our web site: www.uniden.comUniden®is a registered trademark of Uniden America Corporation.AutoTalk, AutoStandby, UltraClear Plus, Random Code, and AutoSecure, are trademarks of Uniden America Corporation.Features • 2.4 GHz Extended Range Technology• 3 Line Backlit Display• Caller ID and Call Waiting Caller ID• One touch Access to Voicemail Box• Message Waiting Indicator• 20 Number Memory Dialing• 32 Digit Redial• Flash and Pause• English or French Display Option• Tone/Pulse Dialing• Page/Find handset• Up to 7 Hour Talk Time/14 Day Standby Time• Handset Earpiece and Ringer Volume Control• Hearing Aid Compatible• 20 Channel AutoscanAs an ENERGY STAR®Partner, Uniden has determined that this product orproduct models meets the ENERGY STAR®guidelines for energy efficiency.ENERGY STAR®is a U.S. registered mark.EXT3165-01/22 1/22/03 7:37 PM Page 5
CONTROLS AND FUNCTIONS[ 6 ] www.uniden.com23415768911201615141310121918171. Handset antenna2. Beltclip hole3. Optional headset jack4. Handset battery compartment5. Handset earpiece6. LCD display7. (Caller ID) cid/menu key8. Talk/flash key9. */tone/ (left cursor) key10. Redial/p (pause) key11. Select key12. Handset microphone and ringer speaker13. (Volume) vol/ring/ (up) key14. Voicemail key15. End key16. (Volume) vol/ring/ (down) key17. #/ (right cursor) key18. (Memory) mem key19. Delete/ch (channel) key20. Handset charging contactsControls and FunctionsEXT3165-01/22 1/22/03 7:37 PM Page 6
CONTROLS AND FUNCTIONS [ 7 ]www.uniden.com21 24 25222321. charge/in use/voicemail LED22. Find handset key23. Base charging contacts24. Telephone line jack25. DC IN 9V jackEXT3165-01/22 1/22/03 7:37 PM Page 7
GETTING STARTED[ 8 ] www.uniden.comSetting up the PhoneDo the following steps:A. Choose the best location C. Connect the base unitB. Install the rechargeable battery pack into the handsetA. Choose the best locationBefore choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS included in the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONSbrochure. Here are some important guidelines you should consider:•The location should be close to both a phone jack and a continuous power outletwhich is not switchable.•Keep the base and handset away from sources of electrical noise such as motors,microwave ovens, and fluorescent lighting.•Be sure there is sufficient space to raise the base antenna to a vertical position. •The base can be placed on a desk, tabletop, or mounted on a standard wall plate.Avoid excessive moisture, extremely low temperatures, dust, mechanical vibration, or shockAvoid heat sources, such as radiators,air ducts, and sunlightAvoid television sets and otherelectronic equipmentAvoid noise sources such as a window by a street with heavy trafficAvoid microwave ovensAvoid personal computersAvoid other cordless telephonesChoose a central locationIf your home hasspecially wired alarmequipment connected tothe telephone line, besure that installing thesystem does not disableyour alarm equipment.If you have questionsabout what will disableyour alarm equipment,contact your telephonecompany or a qualifiedinstaller.EXT3165-01/22 1/22/03 7:37 PM Page 8
GETTING STARTEDGETTING STARTED [ 9 ]www.uniden.comB. Install the rechargeable battery pack into the handsetThe handset is powered by a rechargeable battery pack. The battery recharges automatically when the handset isplaced in the base unit.Charge the handset battery pack for at least 15-20hours before using your new cordless telephone for thefirst time! To maximize the charge capacity of your batterypack, DO NOT plug the telephone cord into the base unitand wall jack until the battery is fully charged.1) Press down on the handset battery case cover (use thefinger indention for a better grip) and slide the coverdownward to remove.2) Plug the battery pack connector (red & black wires) intothe small, black jack inside the battery compartment. (The connector notches fit into the grooves of the jack onlyone-way.) Match the wire colors to the polarity label in thebattery compartment, connect the battery and listen for a click to insure connection.3) Make certain you have made a good connection by slightlypulling on the battery wires to insure that there is a secureconnection. If the battery connector is not securelyconnected, the handset will not charge properly.•Use only the Uniden(BT-905)rechargeable batterypack supplied withyour cordlesstelephone.• Replacement batteriesare also availablethrough the UnidenParts Department at(800) 554-3988,Monday thru Fridayfrom 8:00 a.m. to5:00 p.m. or online atwww.uniden.comEXT3165-01/22 1/22/03 7:37 PM Page 9
GETTING STARTED[ 10 ] www.uniden.com4) Place the battery case cover back on the handset by slidingit upwards until it clicks into place.5) Place the handset in the base unit for 15-20 hours withoutinterruption. The base unit’s LED light labeled (charge/inuse/voicemail) illuminates once the handset is placed inthe base. The LED light will illuminate regardless if thebattery pack is connected or not.DO NOT rely on the LED light as an indicator that thebattery pack is connected and the handset is charging!If the base charge/in use/voicemail LED light does notilluminate:• Check to see if the AC adapter is plugged into the baseunit and the electrical wall outlet properly. (Use only thesupplied AC adapter. Do not use any other AC adapter.)• Check to see if the handset is sitting correctly in thebase and making good contact with the base unit’scharging contacts.EXT3165-01/22 1/22/03 7:37 PM Page 10
GETTING STARTEDGETTING STARTED [ 11 ]www.uniden.com• Even when thebattery pack is notbeing used, it willgradually dischargeover a long period of time. For optimumperformance, be sureto return the handsetto the base unit aftera telephone call.•Talk Mode - The handset is off thebase and talk/flashhas been pressedenabling a dial tone.•Standby Mode - The handset is not inuse, off the base andtalk/flash has notbeen pressed. A dialtone is not present.Cleaning the charging contactsTo maintain a good charge, it is important to clean thecharging contacts on both the handset and base unit oncea month. Use a dry cloth or pencil eraser to clean. If thecontacts become very dirty, using water only, dampen acloth to clean the charging contacts. Then make sure togo back over the charging contacts with a dry cloth beforereturning the handset to the base to charge.The last number dialed in the redial memory, as well as,the names and the numbers stored in the memorylocations are retained for up to 30 minutes while youreplace the battery pack.Low battery alertWhen the battery pack is very low and needs to be charged,the phone is programmed to eliminate functions in order tosave power. If the phone is not in use, ¨Low Battery¨appears on the LCD and none of the keys will operate. If the phone is in use, ¨Low Battery¨ flashes and thehandset beeps. Complete your conversation as quickly aspossible and return the handset to the base unit for charging.Battery use time (per charge)From fully charged (15-20 hours charge time)• Up to seven hours continuous use during talk mode• Up to fourteen days when the handset is in the standby modeEXT3165-01/22 1/22/03 7:37 PM Page 11
GETTING STARTED[ 12 ] www.uniden.comPlace the power cord sothat it does not createa trip hazard or where it could become chafedand create a fire orelectrical hazard.Use only the suppliedAD-446 AC adapter. Do not use any otherAC adapter.• Connect the AC adapter to a continuous power supply.• Place the base unit close to the AC outlet so that you can unplug the AC adapter easily.C. Connect the base unit1) Connect the AC adapter to the DC IN 9V jackand to a standard 120V AC wall outlet.2) Set the base on a desk or tabletop, and place the handset on the base unit.3) Make sure that the charge/in use/voicemail LED illuminates. If the LED does not illuminate, check to see that the AC adapter is plugged inand that the handset makes good contact with the base charging contacts.Route the cord.•After installing the battery pack in the handset, charge your handset at least 15-20hours before plugging into the phone line.4) Once the handset battery packs are fully charged, connect thetelephone line cord to the TEL LINE jack and to a telephoneoutlet once the handset is fully charged.ModularIf your telephone outlet isn't modular,contact your telephone company for assistance.EXT3165-01/22 1/22/03 7:37 PM Page 12
GETTING STARTEDGETTING STARTED [ 13 ]www.uniden.comMounting the Base Unit on a WallStandard wall plate mountingThis phone can be mounted on any standard wall plate.1) Plug the AC adapter into the DC IN 9V jack.2) Wrap the AC adapter cord inside the moldedwiring channel as shown.3) Plug the AC adapter into a standard 120V AC wall outlet.4) Plug the telephone line cord into the TEL LINEjack. Wrap the cord inside the molded wiringchannel as shown.5) Plug the telephone line cord into the telephoneoutlet.6) Raise the antenna to a vertical position.7) Align the mounting slots on the base with themounting posts on the wall. Then push in and downuntil the phone is firmly seated.DO NOT use an ACoutlet controlled by a wall switch.EXT3165-01/22 1/22/03 7:37 PM Page 13
GETTING STARTED[ 14 ] www.uniden.comDirect wall mountingIf you don't have a standard wall plate, you can mount your phone directly to thewall. Before doing this, consider the following:•Avoid electrical cables, pipes, or other items behind the mounting location thatcould cause a hazard when inserting screws into the wall.•Try to mount your phone within 5 feet of a working phone jack to avoid excessivelengths.•Make sure the wall material is capable of supporting the weight of the base and handset.•Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices suitablefor the wall material where the base unit will be placed.1) Insert two mounting screws into the wall, (with their appropriate anchoring device), 3-15/16 inches apart. Allow about 1/8 of an inch between the wall and screw headsfor mounting the phone.2) Refer to steps 1 through 7 on page 13 to mount the telephone.EXT3165-01/22 1/22/03 7:37 PM Page 14
GETTING STARTEDGETTING STARTED [ 15 ]www.uniden.comSetting Menu OptionsThere are five setup options available. They are Caller ID options [AutoTalk, CIDCW(Caller ID on Call Waiting), Area Code], Dial Mode and Language.AutoTalk allows you to answer the phone without pressing the talk/flash button. If the phone rings when AutoTalk is On, simply remove the handset from the baseand the phone automatically answers the call. If the phone rings when AutoTalk is Off, you must press talk/flash to answer the call. Caller ID optionsTo change your AutoTalk and CIDCW:1) Press and hold cid/menu. The following screen appears.2) Use the vol/ring/ or vol/ring/ key to move the pointerto the selection that you would like to change.Press select to toggle between ¨On¨ and ¨Off¨ for AutoTalk and CIDCW.3) Press end and return the handset to the base unit to complete the setting. The handset returns to the standby mode.To enter your Area CodeIf you enter a 3-digit area code number in the Area Code option, your local areacode does not appear in Caller ID messages. Do not program this option, if your calling area requires 10-digit dialing. When reviewing Caller ID messages, you willsee only the local seven digit number. For calls received from outside your local areacode, you will see a full 10-digit number.• If your calling arearequires 10-digit dialing, do notprogram this option.• The Cordless phonefeatures includeAutoTalkTM andAutoStandbyTM.AutoStandby allowsyou to hang up bysimply returning thehandset to the base.EXT3165-01/22 1/22/03 7:37 PM Page 15
GETTING STARTED[ 16 ] www.uniden.comMake sure your batterypack is fully chargedbefore choosing the dialing mode.1) When the phone is in the standby mode, press and hold cid/menu. The Caller ID setting screen appears.2) Press the vol/ring/ key twice to select ¨Area Code¨.3) Press select.4) Use the number keys (0 - 9), or delete/ch to enter the 3-digit area code.5) Press select. A confirmation tone sounds and the displayed area code is entered.6) Press end or return the handset to the base unit to complete the setting. The handset returns to the standby mode.When the area code has already been stored in memory, thestored area code will be displayed. To change it, use thedelete/ch and number keys to enter the new area code. Then press select. A confirmation tone sounds. To complete thesetting, press end or return the handset to the base unit.Choosing the dialing modeMost phone systems use tone dialing which sends DTMF tones through the phonelines. However some phone systems still use pulse dialing such as in rural areas. The default setting is tone dialing. Depending on your dialing system, set the modeas follows:EXT3165-01/22 1/22/03 7:37 PM Page 16
GETTING STARTEDGETTING STARTED [ 17 ]www.uniden.com1) When the phone is in the standby mode, press and hold cid/menu. The following screen appears.2) Press the vol/ring/ key three times to select ¨Dial¨.3) Press select to toggle between ¨Tone¨ and ¨Pulse¨ for each setting.4) Press end or return the handset to the base unit to complete the setting. The handset returns to the standby mode.•If you are not sure of your dialing system, set for tone dialing. Make a trial call. If the call connects, leave the setting as is, otherwise set for pulse dialing.•If your phone system requires pulse dialing and you need to send the DTMF tones forcertain situations during a call, you may "switch-over" to tone dialing. (Refer to"Tone Dialing Switch-over" on page 20.)Setting the language1) When the phone is in the standby mode, Press and hold cid/menu. The following screen appears.2) Press the vol/ring/ key four times to select ¨Language¨.3) Press select to toggle between ¨Eng¨ and ¨Fr.¨ for eachsetting.4) Press end or return the handset to the base unit to complete the setting. Thehandset returns to the standby mode.EXT3165-01/22 1/22/03 7:37 PM Page 17
BASICS[ 18 ] www.uniden.comMaking and Receiving CallsPick up the handset (AutoTalk)or pick up the handset and presstalk/flash.1) Pick up the handset.2) Press talk/flash.3) Listen for the dial tone.4) Dial the number.OR1) Pick up the handset.2) Dial the number, then presstalk/flash.1) Pick up the handset.2) Press talk/flash.3) Listen for the dial tone.4) Press redial/p.OR1) Pick up the handset.2) Press redial/p, then presstalk/flash.Handset On Base Handset Off BaseTo answera callTo makea callTo hang upTo redialPress talk/flash, any number,*/tone/ or #/ keys(AutoTalk).1) Press talk/flash.2) Listen for the dial tone.3) Dial the number.ORDial the number, then presstalk/flash.1) Press talk/flash.2) Listen for the dial tone.3) Press redial/p.ORPress redial/p, then presstalk/flash.Press end or return the handset to the base (AutoStandby).Refer to page 15"Setting Menu Options"to turn On the AutoTalkfeature if desired.EXT3165-01/22 1/22/03 7:37 PM Page 18
BASICSBASICS [ 19 ]www.uniden.comAdjusting the Handset Ringer and Earpiece VolumeHandset ringer tone and volumePress vol/ring/ or vol/ring/ in standby mode to select oneof five ringer tones and volume combinations.Earpiece volumePressing vol/ring/ or vol/ring/ during a call will changethe earpiece volume of the handset. This setting will remain ineffect after the telephone call has ended.Temporarily Mute RingerIf the handset is off the base, simply press the end key to temporarily mute theincoming ring. The ringer will sound with the next incoming call.When you press vol/ring/ in Maximum mode or vol/ring/ inLow mode, an error tone sounds.If you select “RingerOff”, “<Ringer Off>”appears on the displaywhen you make orreceive calls, or whencharging the handset.EXT3165-01/22 1/22/03 7:37 PM Page 19
BASICS[ 20 ] www.uniden.comRedialThe redial/p key redials the last number dialed. The redialed number can be up to32 digits long.Tone Dialing Switch-overSome telephone companies use equipment that requirespulse dialing (sometimes referred to as rotary dialing). If you need to enter tone dialing digits, you can switch-over to tone dialing during the call. For example, enteringyour bank account number after you have called your bank. Initially make your call with the pulse dialing mode. Once your call connects, pressthe */tone/ key. Enter the desired number. These digits will be sent as tonedialing. Once the call ends, the tone mode is canceled and pulse dialing moderesumes. Traveling Out-of-RangeDuring a call, as you begin to move your handset too far from your base unit, noiseincreases. If you pass the range limits of the base unit, your call will terminate within 1 minute.• The tone feature onlyapplies when the dialmode is set to pulse.• This special numbercan be stored in amemory location. Thisis referred to as ChainDialing (See page27.)EXT3165-01/22 1/22/03 7:37 PM Page 20
BASICSBASICS [ 21 ]www.uniden.comThe UltraClear PlusTMtrue compander circuitryvirtually eliminatesbackground noise. Thisinnovative technology,together with 20different channels,provides you with thebest possible receptionduring all yourconversations.Flash and Call WaitingIf you have "Call Waiting" service and a call waiting tonesounds while you are on a call, press talk/flash to acceptthe waiting call. There is a short pause, then you will hear the new caller. To return to the original caller, presstalk/flash again.PageTo locate the handset (while it's off the base), press find handset on the base. The handset beeps for 60 seconds.Paging is canceled when pressing any key or the handset isreturned to the base.Selecting a Different ChannelIf you encounter interference while using your phone, you can manually change thephone´s channel for clear operation. This function works only when the phone is in use. Press delete/ch. ¨Scanning¨ appears on the display, indicating the phoneis changing to another channel. For more information on interference, refer to"Precautions" on page 45.You can cancel pagingby pressing the findhandset key on the base.hintsYou must subscribe through your local telephone company toreceive Call Waiting Service.EXT3165-01/22 1/22/03 7:37 PM Page 21
MEMORY DIALING[ 22 ] www.uniden.comStoring Phone Numbers and NamesMemory Dialing allows you to dial a number using just a few key presses. Your cordless telephone stores up to 20 names/numbers in the handset.1) Press mem, ¨Select Memory¨ is displayed.2) Press the vol/ring/ or vol/ring/ key, or enter a number (01 - 20) to select the memory location where you would like to store the number.3) Press mem or select.4) Press mem or select. The following screen appears and acursor flashes indicating that the display is ready for thename to be entered.If this screen appears, the selected memory location is already stored. Then you must either edit the entry in this location, delete the entry in this location, or select ¨Go Back¨ to choose another location.5) To enter a name (up to 13 characters), use the number keys.• See the "Steps for entering names and special characters". (See page 25).• Use the #/ and */tone/ key to move the cursor to the desired location.• Use delete/ch to delete characters as needed.• Press and hold delete/ch to delete all the characters.• If a name is not required, go to step 6. Select Memory01 02 JOHN DOE Store Name Edit Memory01 Delete Memory01 Go Back01:(Empty)Press Selectto edit• In memory dialingoperation, you mustpress a key within 30seconds or the phonewill return to thestandby mode. If youreturn the handset tothe base, the phonewill return to thestandby mode also.• You have 30 secondsafter pressing mem toenter the number youwish to store.Otherwise, an errortone will sound. EXT3165-01/22 1/22/03 7:37 PM Page 22
MEMORY DIALINGMEMORY DIALING [ 23 ]www.uniden.com6) Press select. ¨Store Number¨ is displayed.The cursor flashes indicating that the display is ready forthe number to be entered.7) Use the number keys to enter the phone number. The phone number cannot exceed 20 digits.Use redial/p to enter a pause in the dialing sequence. The display shows a ¨P¨. Each pause counts as one digit andrepresents a two second delay of time between the digits.Use delete/ch to delete digits as needed.8) Press select. You will hear a confirmation tone, and thefollowing screen appears. Memory storage is complete.For example, if you store a name and number into memorylocation number 01, the display shows ¨Memory01 Stored¨.After about 2 seconds, the following screen is displayed. Repeat steps 2 - 8 to store more numbers.9) Press end to return to the standby mode. Store Number8007303456 Memory01 Stored01 Movies02 JOHN DOE03 MOM AND DAD Store NumberThe pause feature isuseful for long distancecalling, credit card dialing, or sequencesthat require a pausebetween digits.EXT3165-01/22 1/22/03 7:37 PM Page 23
MEMORY DIALING[ 24 ] www.uniden.comSteps for Entering Names and Special CharactersRefer to the letters on the number keys to select the desired characters.With each press of a numeric key, the displayed character appears in the followingorder: Upper case letters first, lower case letters next and finally the number corresponding to the key.If you make a mistake while entering a nameUse the */tone/ or #/ key to move the cursor to the incorrect character. Press delete/ch to erase the wrong character, then enter the correct character. To delete all characters, press and hold delete/ch.For example, to enter Movies.1) Pick up the handset. Press mem.2) Enter a number or press the vol/ring/ or vol/ring/ key to select a memorylocation.3) Press mem or select. 4) Press mem or select. (When there is information already stored in the selectedmemory location, ¨Edit MemoryXX¨ is displayed. See page 28 for informationon “Editing a Stored Name and/or Phone Number”.)5) Press 6then press #/ to move the cursor to the right.6) Press 6six times.7) Press 8six times.8) Press 4six times.9) Press 3five times.10) Press 7eight times.11) When finished, press mem or select.To continue to store the telephone number,proceed to step 7 on page 24.Number of times key is pressedkeys 1 2 3 4 5 6 7 8 91ABCabc2DEFdef3GHIghi4JKLjkl5MNOmno6PQRSpqrs7TUVtuv8WXYZwxyz9*#-&()(blank) 02abc3def4ghi5jkl6mno7pqrs8tuv9wxyz01If the next characteruses the same numberkey, you must press#/to move thecursor over. Otherwisethe next time you pressthe number key, itchanges the characterthat was previously set.EXT3165-01/22 1/22/03 7:37 PM Page 24
MEMORY DIALINGMEMORY DIALING [ 25 ]www.uniden.com•If you press selectbefore talk/flash, youcan confirm the nameand the numberstored in the selectedmemory location.•To exit the memoryfunction without dialing, press end. The handset returns to the standby mode.•Whenever you areusing a memory menuscreen, you mustpress a key within 30seconds or the phonewill return to thestandby mode.Making Calls with Memory DialingMemory dialing from Standby Mode1) Press mem. The handset displays your programmed memorylocations.2) Press the vol/ring/ or vol/ring/ key, or enter the number (01 - 20) to select the memory location you would like to dial.3) Press talk/flash. ¨Talk¨ and the volume setting appear on the display. Then the displayed number is dialed.Pressing mem while the phone is in use:You can view the memory list while you are talking on the phone.The memory dialing screen shows in the display. The phone number in the memory willbe dialed when the select key is pressed. Select Memory01 Movies 02 JOHN DOE Talk8007303456EXT3165-01/22 1/22/03 7:37 PM Page 25
MEMORY DIALING[ 26 ] www.uniden.comMemory dialing from Talk Mode1) Press talk/flash. “Talk” and the volume setting appears.2) Press mem.3) Press the vol/ring/ or vol/ring/ key, or enter a number (01 - 20) to select the memory location of the desired phonenumber. The selected number and name is displayed. Then thenumber is dialed. 4) The phone number in the memory will be dialed when theselect key is pressed.5) To hang up, press end.Chain DialingThe memory locations on the handset are not limited to phone numbers. You canalso store a group of numbers (up to 20 digits) that you need to enter once yourcall connects. This is referred to as Chain Dialing.An example of this is a bank account number. Once you have called your bank, andare prompted to enter the account number, simply press mem and the location number where the special number has been stored.Store your special number with an identifying name. (Refer to "Storing PhoneNumbers and Names" on page 23.) Talk Talk Volume High Select Memory01 Movies02 JOHN DOE Talk 0:358007303456EXT3165-01/22 1/22/03 7:37 PM Page 26
MEMORY DIALINGMEMORY DIALING [ 27 ]www.uniden.comEditing a Stored Name and/or Phone Number1) Press mem, ¨Select Memory¨ is displayed.2) Press the vol/ring/ or vol/ring/ key, or enter anumber (01 - 20) to select the memory location you wouldlike to edit, and press mem or select.3) Press mem or select.The following screen appears with the memory locationnumber that you have selected in the display.4) Press the vol/ring/ or vol/ring/ key to select ¨EditMemoryXX¨, then press mem or select. The following screenappears. The cursor flashes indicating that the display isready for the name to be edited. When a name has notbeen stored, the cursor appears at the beginning of thesecond line.5) Use the number keys, */tone/ , #/ , or delete/ch toedit the name. (See page 25.) To edit only the phone number, skip this step.6) Press mem or select. The following screen appears.The cursor flashes indicating that the display is ready forthe number to be edited. Select Memory01 Movies02 JOHN DOE Edit Memory01 Delete Memory01 Go Back Store NameMovies Store Number8007303456 01:Movies8007303456EXT3165-01/22 1/22/03 7:37 PM Page 27
MEMORY DIALING[ 28 ] www.uniden.com7) Use the number key, redial/p or delete/ch to edit the phonenumber. The phone number cannot exceed 20 digits. (See page 24.)If you don´t want to change the phone number, skip this step.8) Press mem or select. If you changed either name or phonenumber, a confirmation display shows up. If it is correct,press the vol/ring/ key and press select again. You heara confirmation tone, and the following screen appears. Thememory storage is complete.For example, if you store a name and number into memorylocation number 01, the display shows ¨Memory01Stored¨. After about 2 seconds, Select memory isdisplayed.9) Press end to return to the standby mode. Memory01 Stored01 Movies02 JOHN DOE03 MOM AND DADReplace Memory? Yes NoEXT3165-01/22 1/22/03 7:37 PM Page 28
MEMORY DIALINGMEMORY DIALING [ 29 ]www.uniden.comErasing a Stored Name and Phone Number1) Press mem, ¨Select Memory¨ is displayed.2) Press the vol/ring/ or vol/ring/ key, or enter anumber (01 - 20) to select the memory location you wouldlike to erase.3) Press mem or select.4) Press mem or select.The following screen appears with the memory locationnumber that you have selected in the display.5) Press the vol/ring/ key to move the pointer down to¨Delete MemoryXX¨.6) Press mem or select. The following confirmation screenappears.7) Press the vol/ring/ key to move the pointer to ¨Yes¨.8) Press select or delete/ch.You hear a confirmation tone, and the following screenappears.9) After about 2 seconds, the display returns to the Select memory screen. You may delete the information inanother memory location (return to step 2) or press end toreturn to the standby mode. Select Memory01 Movies02 JOHN DOE Edit Memory02 Delete Memory02 Go Back Edit Memory02 Delete Memory02 Go BackDelete Memory02? Yes No Memory02 Deleted 01 Movies0203 MOM AND DAD01 Movies02 JOHN DOE03 MOM AND DAD02:JOHN DOE5452930EXT3165-01/22 1/22/03 7:37 PM Page 29
VOICE MAIL[ 30 ] www.uniden.com Edit Number Delete Number Go Back Store Number Number StoredUsing One Touch Voice Mail AccessIf you subscribe to voice mail service, you can use your phone to access your voicemailbox. The charge/in use/voicemail indicator on the base of your phone flasheswhenever you have messages waiting in your voice mailbox. Just program the voicemail key with your access number and you can get your messages at the touchof a button. (The voice mail service provider will supply you with the access number.This number may be simply a phone number. Refer to the provider’s literature.)Programming your Voice Mail Access Number1) On the handset, press and hold voicemail for about 2 seconds. The following display appears:If you have previously stored a number, the following display appears:Press or to select “Edit Number”, then press select.2) Enter your personal access number.3) Press select. A confirmation tone sounds and the followingdisplay appears: Store Number Store Number Edit Number Delete Number Go BackYou must subscribe tovoice mail service fromyour telephone companyin order to use this feature. The voice mailservice company willprovide you with theaccess number. Store Number Number StoredEXT3165-01/22 1/22/03 7:37 PM Page 30
VOICE MAILVOICE MAIL [ 31 ]www.uniden.comDeleting your Voice Mail Access Number1) When the phone is standby mode, press and hold voicemail.Following display appears.2) Press or to select “Delete Number”.3) Press select. Following display appears.4) Press to move the pointer to “Yes”.5) Press select or delete/ch.A confirmation tone sounds and the following display appears.After about 2 seconds, the handset returns to standby mode.Dialing your Voice Mail ServiceOnce you’ve programmed your personal access number, you candial your mailbox with a touch of a button. When you havemessages, simply pick up the handset and press voicemail. If you have not entered the access number or it has been deleted, when you pressvoicemail, following display appears and an error tone sounds.Message Waiting IndicatorThe charge/in use/voicemail LED indicator on the base is designed to work withvoicemail service provided by your local telephone company. The indicator flasheswhen you have new voice messages in your mailbox.You may need to occasionally reset the indicator if it remains On after you retrievedyour messages. To reset the indicator, charge the handset and press and hold findhandset on the base for 5 seconds until the indicator stops flashing. Edit Number Delete Number Go BackDelete Number? Yes No Number Deleted Store NumberNo Number StoredPress & hold keyto store numberEXT3165-01/22 1/22/03 7:37 PM Page 31
CALLER ID FEATURES[ 32 ] www.uniden.comCaller IDYou must subscribe to Caller ID service to use this feature.When the telephone rings, the Caller ID feature allows you to view the caller´s nameand phone number on the display before you answer the phone. The handset displaysthe phone number of the incoming call, the name, and time. Additionally, you candial the displayed number and store the information for memory dialing. Make sureyou have turned on the Caller ID/Call Waiting feature. (See page 15.)When the Telephone Rings1) When the Caller ID message is received, the display shows the caller´s phone number along with the date and time. The incoming call information is stored in the Caller ID record. If the Caller ID service includes the caller´s name, thecaller´s name appears on the display (up to 15 letters).You may receive any one of the following messages:When invalid data is received “Incomplete Data”When a private name is received “Private Name”When a private number is received “Private Number”When a unknown name is received “Unknown Name”When a unknown number is received “Unknown Number” 5/11 12:30PM Jane Smith214-555-1234The date andtime receivedCaller's nameCaller's phone number•If you answer a callbefore the Caller IDmessage is received(Example: before thesecond ring), theCaller ID message willnot appear.•When the call isreceived via a telephone companythat does not offerCaller ID service, thecaller´s phone number and name do not appear. (This includes international calls.)•When the call is via a private branchexchange (PBX), thecaller´s phone number and namemay not appear.EXT3165-01/22 1/22/03 7:37 PM Page 32
CALLER ID FEATURESCALLER ID FEATURES [ 33 ]www.uniden.comViewing the Caller ID Message ListThe Caller ID list stores information for up to 30 incoming calls - even unanswered calls.1) Press cid/menu.The summary screen appears. The screen shows the numberof new messages and total messages.2) Press the vol/ring/ key to display the latest Caller IDmessage.3) Press the vol/ring/ key to see the next message. Orpress the vol/ring/ key to see the previous message.4) Press end to return to the standby mode.Data errors appear as ¨¨. Caller ID New :01 Total:02 5/17 12:30PM 03Jane Smith214-555-12342) When you pick up the phone, the display changes to ¨Talk¨. (AutoTalk featureis set to on.)•In Caller ID operation,if no key is pressed formore than 30 seconds,an error tone soundsand the telephonereturns to the standby mode.•If a call comes in via atelephone system thatdoes not offer CallerID service, noinformation is stored.•Each message can beup to 15 charactersfor the phone numberand the name.•The number of callsfrom the same CallerID appears next tothe received time.Once you view thenew message, thenumber willdisappear.EXT3165-01/22 1/22/03 7:37 PM Page 33
CALLER ID FEATURES[ 34 ] www.uniden.comDeleting Information from the Caller ID ListThe cordless phone stores up to 30 messages. If the phone receives the 31stmessage, the oldest one in the list is automatically deleted. Caller ID data can alsobe deleted manually.Deleting a Caller ID message1) Press cid/menu. Display the message to be deleted from the Caller ID list by pressing the vol/ring/ or vol/ring/key.2) Press delete/ch.3) Press the vol/ring/ or vol/ring/ key to select ¨Yes¨ or ¨No¨.4) Press select or delete/ch.When the pointer is at ¨Yes¨:A tone sounds and the Caller ID message is deleted. The next Caller ID message isthen displayed.When the pointer is at ¨No¨:The display returns to the Caller ID message.Deleting all Caller ID names/numbers1) Press cid/menu.2) Press delete/ch. 5/17 12:30PM 03Jane Smith214-555-1234Delete Message? Yes No Caller ID New :01 Total:02•While using the¨Delete All?¨ or¨Delete Message?¨screen if no key ispressed for more than30 seconds, an errortone sounds and thetelephone returns to the standby mode.•If you get an incoming call or page,the deleting operationis canceled and thetelephone returns tothe standby mode soyou can answer thecall or page.EXT3165-01/22 1/22/03 7:37 PM Page 34
CALLER ID FEATURESCALLER ID FEATURES [ 35 ]www.uniden.com3) Press the vol/ring/ or vol/ring/ key to select ¨Yes¨ or ¨No¨.4) Press select or delete/ch.When the pointer is at ¨Yes¨:A tone sounds and all stored Caller ID messages are deleted.When the pointer is at ¨No¨:The display returns to the summary screen. Caller ID Total:00 Caller ID New :01 Total:02Delete All? Yes NoEXT3165-01/22 1/22/03 7:37 PM Page 35
CALLER ID FEATURES[ 36 ] www.uniden.comPressing cid/menu while the phone is in use:You can view the message list while you are talking on the phone.The Caller ID message screen shows in the display. The phone number in the Caller IDmessage will be dialed when the select key is pressed.Using the Caller ID ListCalling a party from the Caller ID listYou can place a call from the Caller ID list. The cordless phone stores up to 30 messages.1) Press cid/menu. Select the phone number that you want todial by pressing the vol/ring/ or vol/ring/ key.2) Press talk/flash. The displayed phone number dials automatically.Long Distance calls and Area Code Setting/CancellationPressing 1while the incoming Caller ID information is displayed (in step 1) willplace the prefix ¨1¨ in the display to set up for a long distance call. Pressing 3willset or cancel an area code setting. 5/17 12:30PM 03Jane Smith214-555-1234 Talk2145551234•You cannot make acall from the Caller IDlist if your cordlesstelephone isconnected to aprivate branchexchange (PBX).•When a long distancecall has been set, ¨1¨appears in the display.EXT3165-01/22 1/22/03 7:37 PM Page 36
CALLER ID FEATURESCALLER ID FEATURES [ 37 ]www.uniden.comStoring Caller ID messages in Memory dialingMessages shown in the Caller ID list can be stored in memory dialing. Using theincoming call information (i.e., Caller ID list), the phone number of the party on the Caller ID list can be stored in memory.1) Press cid/menu.Select the phone number to be stored from the Caller ID listby pressing the vol/ring/ or vol/ring/ key.2) Press mem.3) Press the vol/ring/ or vol/ring/ key or enter a number (01 - 20) to select the memory location to be stored.4) Press select.You hear a confirmation tone, and the number is stored in memory. The display returns to the Caller ID list. 5/17 12:30PM 03Jane Smith214-555-1234 Select Memory01 02 JOHN DOE 5/17 12:30PM 03Jane Smith214-555-1234Replace Memory? Yes NoIf a message has already been stored in the selected memorynumber location, a confirmation screen is displayed. Press the vol/ring/ key to select ¨Yes¨. Press select tooverwrite. The display returns to the Caller ID list.You cannot store aCaller ID message if nophone number appearsin the message.EXT3165-01/22 1/22/03 7:37 PM Page 37
ADDITIONAL INFORMATION[ 38 ] www.uniden.comChanging the Digital Security CodeThe digital security code is an identification code used to connect the handset andthe base unit. Normally, setting the code is not necessary. The first time you chargeyour handset, the security code is automatically set. In the rare situation that you suspect another cordless telephone is using the samesecurity code, you can change the code.1) Remove the handset from the base unit. Press and hold find handset on the base.2) While holding find handset, place the handset on the base unit, and leave thehandset on the base for more than 3 seconds. A new random security code is set.Installing the BeltclipTo attach the beltclipInsert the beltclip into the holes on each side of the handset. Press down until it clicks.To remove the beltclipPull both sides of the beltclip to release the tabs from the holes.Headset InstallationYour phone may be used with an optional headset, the Uniden HS910. To use this feature, insert the headset plug into the headset jack. Your phone is ready for hands-free conversations.(Headset may be purchased by calling the Uniden Parts Department or visiting the web site, see QUICK REFERENCE GUIDE on page 3.)•To protect you againstmisbilled calls whichmight result from yourphone being activatedby other equipment,the cordless phone hasAutoSecureTM featureelectronically locksyour phone when thehandset is in the base.Also, the RandomCodeTM digital securitywhich automaticallyselects one of over262,000 digitalsecurity codes for thehandset and base.•If the handset batterypack is completelydischarged or thebattery pack isremoved, the digitalsecurity code will belost. If this happens, a new security code isset automatically thenext time the batterypack is charged.EXT3165-01/22 1/22/03 7:37 PM Page 38
ADDITIONALINFORMATIONADDITIONAL INFORMATION [ 39 ]www.uniden.comNote on Power SourcesBattery replacement and handlingWhen the operating time becomes short, even after a battery is recharged, please replace the battery.With normal usage, your battery should last about one year. Please contact your place of purchase or theUniden Parts Department for a replacement battery.Warning: To avoid the risk of personal injury or property damage from fire or electrical shock, only use theUniden battery model and Uniden adapter model specifically designated for this product.Power FailureDuring the period that the power is off, you will not be ableto make or receive calls with the telephone.Caution• Use only the specified Uniden battery pack (BT-905).• Do not remove the battery from the handset to charge it.• Never throw the battery into a fire, disassemble it, or heat it.• Do not remove or damage the battery casing.CautionDo not use paint thinner,benzene, alcohol, or otherchemical products. Doing so may discolor thesurface of the telephoneand damage the finish.MaintenanceWhen the handset or base unit becomes slightly dirtyWipe with a soft, dry cloth.When the handset or base unit becomes very dirtyWipe with a soft cloth that has been dampened with diluted, neutral detergent.Dry with a dry cloth.When the charging contacts become very dirty on both the handset andbase unitUsing water only, dampen a cloth to clean the charging contacts. Then makesure to go back over the charging terminals with a dry cloth before returningthe handset to the base unit to charge.EXT3165-01/22 1/22/03 7:37 PM Page 39
ADDITIONAL INFORMATION[ 40 ] www.uniden.comTroubleshootingIf your phone is not performing to your expectations, please try these simple steps first.SymptomThe charge/in use/voicemailLED won't illuminate whenthe handset is placed in the base.The audio sounds weakand/or scratchy.Can't make or receive calls.Suggestion•Make sure the AC adapter is plugged into the base and wall outlet.•Make sure the handset is properly seated in the base.•Make sure the charging contacts on the handset and base are clean.•Make sure that the base antenna is in a vertical position.•Move the handset and/or base to a different location away from metalobjects or appliances and try again.•Press delete/ch to help eliminate background noise.•Make sure that you are not too far from the base.•Check both ends of the base telephone line cord.•Make sure the AC adapter is plugged into the base and wall outlet.•Disconnect the AC adapter for a few minutes, then reconnect it.•Change the digital security code (see page 39).•Make sure that you are not too far from the base.EXT3165-01/22 1/22/03 7:37 PM Page 40
ADDITIONALINFORMATIONADDITIONAL INFORMATION [ 41 ]www.uniden.comSymptomThe handset doesn't ring orreceive a page.Severe noise interference.The Caller ID does not display.Voice Message Indicationdoes not work.If you still have a problem.Suggestion•The battery pack may be weak. Charge the battery for 15-20 hours.•The handset may be too far away from the base unit.•Place the base unit away from appliances or metal objects.•Change the digital security code (see page 39).•Keep the handset away from microwave ovens, computers, remote controltoys, wireless microphones, alarm systems, intercoms, room monitors,fluorescent lights, and electrical appliances.•Move to another location or turn off the source of interference.•The handset was picked up before the second ring.•The call was placed through a switchboard.•Call your local telephone company to verify your Caller ID service is current.•Charge the handset.•Contact your local telephone company to make sure that your telephonereceives FSK and SDT message signaling.•Call our customer hotline at 1-800-297-1023.EXT3165-01/22 1/22/03 7:37 PM Page 41
ADDITIONAL INFORMATION[ 42 ] www.uniden.comCaseIf the handset or base is exposed tomoisture or liquid, but only affects theexterior plastic housing.If moisture or liquid has entered theplastic-housing (i.e. liquid can beheard in the phone or liquid hasentered the handset batterycompartment or vent openings on thebase).ActionWipe off the liquid and use as normal.Handset:1. Remove the battery cover and leave it off for ventilation.2. Remove the battery pack by disconnecting. 3. Leave the battery cover off and the battery pack disconnected for at least 3 days.4. Once completely dry, reconnect the battery pack and the battery cover. 5. Recharge the handset’s battery pack for 20 hours in the base unit before using the phone.Base:1. Disconnect the AC adapter from the base unit, cutting off electrical power.2. Disconnect the telephone cord from the base unit.3. Let dry for at least 3 days.IMPORTANT: You must unplug the telephone line while recharging the battery pack toavoid charge interruption.CAUTION:DO NOT use a microwave oven to speed up the drying process. This will cause permanentdamage to the handset, base and the microwave oven.After following these steps, if your cordless telephone does not work, please send to:Uniden America CorporationParts and Service Division4700 Amon Carter Blvd.Ft. Worth, TX 761551-800-554-3988. Monday through Friday8 a.m. to 5 p.m. CSTLiquid DamageMoisture and liquid can damage your cordless phone. In case of accidental submersion, please read thefollowing steps.EXT3165-01/22 1/22/03 7:37 PM Page 42
ADDITIONALINFORMATIONADDITIONAL INFORMATION [ 43 ]www.uniden.comGeneral InformationThe phone complies with FCC Parts 15 and 68.Operating temperature: -10°to 50°C (+14°F to +122°F)AC Adapter InformationAC Adapter part number: AD-446Input Voltage: 120V AC 60HzOutput Voltage: 9V DC 210 mABattery InformationBattery part number: BT-905Capacity: 600 mAH, 3.6VBattery use time (per charge)From fully chargedTalk mode duration: Up to 7 hoursStandby mode duration: Up to 14 daysRecharge your phone on a regular basis by returning the handset to the base after each phone call. When the operating time becomes short, even after the battery is recharged, please replace the battery. With normal usage, the battery should last about one year. A replacement Uniden adapter and battery may be purchased at your local Uniden dealer or by contactingthe Uniden Parts Department (800) 554-3988. Hours are from 8:00 a.m. to 5:00 p.m. Central Time, Mondaythrough Friday. We can also be reached on the web at www.uniden.com. Specifications, features, and availability of optional accessories are all subject to change without priornotice.•To avoid damage to the phone use only Uniden AD-446 and BT-905 with your phone.•If the handset is left off of the base, the actual Talk mode duration will be reduced respective to the amount of time the handsetis off the base.EXT3165-01/22 1/22/03 7:37 PM Page 43
ADDITIONAL INFORMATION[ 44 ] www.uniden.comPrecautions!Before you read anything else, please observe the following:Warning!Uniden America Corporation DOES NOT represent this unit to bewaterproof. To reduce the risk of fire, electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture. Rechargeable Nickel-Cadmium Battery Warning•This equipment contains a rechargeable nickel-cadmium battery.•Cadmium is a chemical known to the State of California to causecancer.•The rechargeable nickel-cadmium battery contained in thisequipment may explode if disposed of in a fire.•Do not short-circuit the battery.•Do not charge the rechargeable nickel-cadmium battery used in thisequipment in any charger other than the one designed to chargethis battery as specified in the owner’s manual. Using anothercharger may damage the battery or cause the battery to explode.Rechargeable Nickel-CadmiumBatteries Must Be Recycled orDisposed of Properly•Uniden voluntarily participates in an RBRC®industry program to collect and recycle nickel-cadmium batteries atthe end of their useful life, when taken out of service within theUnited States. The RBRC® program provides a convenient alternative to placingused nickel-cadmium batteries into the trash or municipal wastestream, which is illegal in some areas.•Through the RBRC® program, Uniden makes it easy for you to dropoff the used battery at local retailers of replacement nickel-cadmiumbatteries. You may also contact your local recycling center forinformation on where to return the used battery. Please call 1-800-8-BATTERY for information on Ni-Cd battery recycling in your area.Uniden's involvement in this program is part of its commitment toprotecting our environment and conserving natural resources.•RBRC® is a registered trademark of the Rechargeable BatteryRecycling Corporation.Uniden works to reduce lead content in our PVC coated cords in ourproduct and accessories.WARNING: The cords on this products and/or accessories containlead, a chemical known to the State of California to cause birth defectsor other reproductive harm. Wash hands after handling.Important Safety InstructionsWhen using your telephone equipment, these basic safety precautionsshould always be followed to reduce the risk of fire, electrical shock,and injury to persons:1. Read and understand all instructions.2. Follow all warnings and instructions marked on the product.3. Unplug this product from the wall outlet before cleaning. Use a drycloth for cleaning without liquid or aerosol cleaners.4. Do not use this product near water; for example, near a bathtub,wash bowl, kitchen sink or laundry tub, in a wet basement, or near aswimming pool.5. Do not place this product on an unstable cart, stand, or table. The telephone may fall, causing serious damage to the unit.6. Slots and openings in the cabinet and the back or bottom areprovided for ventilation. To protect the product from overheating,these openings must not be blocked or covered. This product shouldnever be placed near or over a radiator or heat register. This productshould not be placed in a built-in installation unless properventilation is provided.7. This product should be operated only from the type of power sourceindicated on the marking label. If you are not sure of the type ofpower supply to your home, consult your dealer or local powercompany.8. Do not allow anything to rest on the power cord. Do not locate thisproduct where the cord will be damaged by persons walking on it.9. Do not overload wall outlets and extension cords, as this can resultin the risk of fire or electrical shock.10. Never push objects of any kind into this product through cabinetslots, as they may touch dangerous voltage points or short out partsthat could result in a risk of fire or electric shock. Never spill liquidof any kind on the product.11. To reduce the risk of electric shock, do not disassemble this product.Take it to qualified service personnel when service or repair work isrequired. Opening or removing covers may expose you to dangerousvoltages or other risks. Incorrect reassembly can cause electric shockwhen the appliance is subsequently used.12. Unplug this product from the wall outlet and refer servicing toqualified service personnel under the following conditions:A. When the power supply cord is damaged or frayed.B. If liquid has been spilled into the product.C. If the product has been exposed to rain or water.D. If the product does not operate normally when following theoperating instructions. (Adjust only those controls that arecovered by the operating instructions. Improper adjustmentof other controls may result in damage and will often requireextensive repair work by a qualified technician.)E. If the product has been dropped or the cabinet has beendamaged.F. If the product exhibits a distinct change in performance.13. Do not use the telephone to report a gas leak in the vicinity of the leak.Additional Battery Safety PrecautionsCaution! To reduce the risk of fire or injury to persons by thebattery, read and follow these instructions:1. Use only the Uniden battery pack specified in the owner’s manual. 2. Do not dispose of the battery pack in a fire. The cell may explode.Check the nickel-cadmium battery disposal package insert fordisposal instructions.3. Do not open or mutilate the battery pack. Released electrolyte iscorrosive and may cause damage to the eyes or skin. It may be toxicif swallowed.4. Exercise care in handling the battery in order not to short thebattery with conducting materials such as rings, bracelets, and keys.The battery or conductor may overheat and cause burns.5. Charge the battery pack provided with or identified for use with thisproduct only in accordance with the instructions and limitationsspecified in the owner’s manual provided for this product.6. Observe proper polarity orientation between the battery pack andbattery charger.SAVE THESE INSTRUCTIONS!Important Electrical ConsiderationsUnplug all electrical appliances when you know an electrical storm isapproaching. Lightning can pass through your household wiring anddamage any device connected to it. This phone is no exception.The FCC Wants You To KnowChanges or modifications to this product not expressly approved byUniden, or operation of this product in any way other than as detailedby the owner’s manual, could void your authority to operate thisproduct. Your telephone compiles with Part 68 of FCC Rules. You must,upon request, provide the FCC registration number and the REN to yourtelephone company. Both numbers are on the base unit.NOTE: You must not connect your phone to:• coin-operated systems• most electronic key telephone systemsRangeYour new phone is designed to achieve the maximum possible range bytransmitting and receiving according to the highest specifications setforth by the FCC. We have rated this phone to operate at a maximumdistance with the qualification that the range depends upon theenvironment in which the telephone is used. Many factors limit range,and it would be impossible to include all the variables in our rating.The Maximum Range rating of this phone is meant to be used as ameans of comparison against other range claims.The exclamation point within an equilateral triangle isintended to alert the user to the presence of importantoperating and maintenance (servicing) instructions inthe literature accompanying the appliance.EXT3165-01/22 1/22/03 7:37 PM Page 44
ADDITIONALINFORMATIONADDITIONAL INFORMATION [ 45 ]www.uniden.comTelephone Line ProblemsThe FCC has granted the telephone company the right to disconnectservice in the event that your phone causes problems on the telephoneline. Also, the telephone company may make changes in facilities andservices which may affect the operation of your unit. However, yourtelephone company must give adequate notice in writing prior to suchactions to allow you time for making necessary arrangements tocontinue uninterrupted service.If you are having trouble with your telephone service, you must firstdisconnect your phone to determine if it is the cause of your problem.If you determine that it is the cause, you must leave it disconnecteduntil the trouble has been corrected.Radio InterferenceRadio interference may occasionally cause buzzing and humming in yourcordless handset, or clicking noises in the base. This interference iscaused by external sources such as TV, refrigerator, vacuum cleaner,fluorescent lighting, or electrical storm. Your unit is NOT DEFECTIVE. If these noises continue and are too distracting, please check aroundyour home to see what appliances may be causing the problem. In addition, we recommend that the base not be plugged into a circuitthat also powers a major appliance because of the potential forinterference. Be certain that antenna on the unit is fully extended. In the unlikely event that you consistently hear other voices ordistracting transmissions on your phone, you may be receiving radiosignals from another cordless telephone or other source of interference.If you cannot eliminate this type of interference, you need to change toa different channel.Finally, it should be noted that some cordless telephones operate atfrequencies that may cause interference to nearby TVs and VCRs. To minimize or prevent such interference, the base of the cordlesstelephone should not be placed near or on top of a TV or VCR. If interference is experienced, moving the cordless telephone fartheraway from the TV or VCR will often reduce or eliminate the interference.More Than One Cordless TelephoneIf you want to use more than one cordless telephone in your home,they must operate on different channels. Press the channel key to selecta channel that provides the clearest communication.Cordless Telephone PrivacyCordless telephones are radio devices. Communications between thehandset and base of your cordless telephone are accomplished by meansof radio waves which are broadcast over the open airways. Because ofthe inherent physical properties of radio waves, your communicationscan be received by radio receiving devices other than your own cordlesstelephone unit. Consequently, any communications using your cordlesstelephone may not be private.Installation ConsiderationsSelecting a LocationBefore choosing a location for your new phone, there are someimportant guidelines you should consider:•The location should be close to both a phone jack and continuouspower outlet. (A continuous power outlet is an AC outlet which doesnot have a switch to interrupt its power.)•Keep the base and handset away from sources of electrical noisesuch as motors or fluorescent lighting.•Be sure there is sufficient space to fully extend the base antenna.•The base can be placed on a desk or tabletop or mounted on astandard telephone wall plate.•You should charge your new phone for 15-20 hours beforecompleting the installation or using the handset.Telephone Line OutletsThere are two types of phone outlets:Modular JackMost phone equipment available now uses modular jacks. Phone cordsare fitted with a molded plastic connector which plugs into this type of jack. If you do not have modular phone jacks, contact your localtelephone company for information about their installation.Hardwired JackSome equipment is wired directly to a phone jack, and these types ofinstallations require a modular jack converter. This type of installationis not difficult; however, you should contact your Uniden telephonedealer or a telephone supply store for advice about the proper adapteror converter for your particular situation.Connecting the Telephone CordsConsider these safety guidelines before connecting the telephone cords:Caution!• Never install telephone wiring during a lightning storm.• Never touch uninsulated telephone wires or terminals unless thetelephone line has been disconnected.• Use caution when installing or modifying telephone lines.Applying Power to the BaseThis phone requires an AC outlet, without a switch to interrupt power,and the included AC adapter. To relieve strain on the DC plug when thephone is placed on a desk or table, wrap the power cord around thestrain relief notch on the back of the base.NOTE: Place the power cord so that it does not create a triphazard, or where it could become chafed and create afire or other electrical hazards.One Year Limited WarrantyImportant:Evidence of original purchase is required for warranty service.WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”)ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the originalretail owner, this Uniden Product to be free from defects in materialsand craftsmanship with only the limitations or exclusions set out below.WARRANTY DURATION: This warranty to the original user shall terminateand be of no further effect 12 months after the date of original retailsale. The warranty is invalid if the Product is (A) damaged or notmaintained as reasonable or necessary, (B) modified, altered, or used aspart of any conversion kits, subassemblies, or any configurations notsold by Uniden, (C) improperly installed, (D) serviced or repaired bysomeone other than an authorized Uniden service center for a defect ormalfunction covered by this warranty, (E) used in any conjunction withequipment or parts or as part of any system not manufactured byUniden, or (F) installed or programmed by anyone other than asdetailed by the owner’s manual for this product.STATEMENT OF REMEDY: In the event that the product does not conformto this warranty at any time while this warranty is in effect, warrantorwill either, at its option, repair or replace the defective unit and returnit to you without charge for parts, service, or any other cost (exceptshipping and handling) incurred by warrantor or its representatives inconnection with the performance of this warranty. Warrantor, at itsoption, may replace the unit with a new or refurbished unit. THELIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIREWARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF ANDEXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER,WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW,INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OFMERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THISWARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT ORPAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states donot allow this exclusion or limitation of incidental or consequentialdamages so the above limitation or exclusion may not apply to you.LEGAL REMEDIES: This warranty gives you specific legal rights, and youmay also have other rights which vary from state to state. This warrantyis void outside the United States of America and Canada.PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, afterfollowing the instructions in the owner’s manual you are certain thatthe Product is defective, pack the Product carefully (preferably in itsoriginal packaging). The Product should include all parts and accessoriesoriginally packaged with the Product. Include evidence of originalpurchase and a note describing the defect that has caused you to returnit. The Product should be shipped freight prepaid, by traceable means,to warrantor at:Uniden America CorporationParts and Service Division4700 Amon Carter Blvd. Fort Worth, TX 76155(800) 297-1023, 8 a.m. to 5 p.m. Central, Monday through FridayEXT3165-01/22 1/22/03 7:37 PM Page 45
ADDITIONAL INFORMATION[ 46 ] www.uniden.comI.C. NoticeTERMINAL EQUIPMENTNOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications.This is confirmed by the registration number. The abbreviation, IC, before the registration number signifiesthat registration was performed based on a Declaration of Conformity indicating that Industry Canadatechnical specifications were met. It does not imply that Industry Canada approved the equipment.NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipmentitself. The REN assigned to each terminal equipment provides an indication of the maximum number ofterminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer EquivalenceNumbers of all the devices does not exceed five.RADIO EQUIPMENTThe term “IC:” before the radio certification number only signifies that Industry Canada technicalspecifications were met.Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. “Privacy of communications may not be ensured when using this telephone”.EXT3165-01/22 1/22/03 7:37 PM Page 46
ADDITIONALINFORMATIONADDITIONAL INFORMATION [ 47 ]www.uniden.comAAC adapter information ...................................... 43Adjusting ringer and earpiece volume.................... 19BBattery packInformation .................................................. 43Install .......................................................... 9Maintenance ............................................ 11, 39Preparing and charging .................................. 12Replacement and handling .............................. 39Beltclip installation .......................................... 38CCaller IDCaller ID service .............................................. 32Call Waiting .................................................. 21Deleting ...................................................... 34Setting Caller ID options ................................ 15Using .......................................................... 36Viewing........................................................ 33Channel .......................................................... 21Connection ...................................................... 12DDial mode........................................................ 16Digital security code ........................................ 38E, F, GEarpiece volume................................................ 19General information .......................................... 43HHeadset installation .......................................... 38I, J, K, LI.C. Notice ...................................................... 46Interference .................................................... 45Language ........................................................ 17M, N, OMaintenance .................................................... 39Making a call .................................................. 18Memory dialingEditing a stored nameand/or phone number .................................... 27Erasing a stored nameand phone number.......................................... 29Making calls with memory dialing...................... 25Storing phone numbers and names ........................................ 22Mounting on a wall .......................................... 13P, QPackage contents................................................ 3Paging ............................................................ 21Precautions...................................................... 44Quick reference guide .......................................... 3RReceiving a call................................................ 18Redialing a call .......................................... 18, 20Ringer tone and volume .................................... 19SSetting menu options ........................................ 15Setting up the handset ........................................ 9Setting up the phone .......................................... 8T, U, V, W, X, Y, ZTechnical information ........................................ 43Troubleshooting................................................ 40Voicemail ........................................................ 22Warranty ........................................................ 45EXT3165-01/22 1/22/03 7:37 PM Page 47
At Uniden, we´ll take care of you!If you need any assistance with this product, please call our Customer Hotline at1-800-297-1023PLEASE DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE.Our Uniden representatives will be happy to help you with any matters regarding the operation of this unit, available accessories, or any other related matters.Thank you for purchasing a Uniden product.Hours: M-F 8:00 AM to 5:00 PM CST.For information on the accessibility features of this product, please call1-800-874-9314 (V/TTY)?AccessibilityEXT3165-01/22 1/22/03 7:37 PM Page 49

Navigation menu