Uniden America UP033R CORDLESS TELEPHONE REMOTE (HANDSET) User Manual EXAI7248

Uniden America Corporation CORDLESS TELEPHONE REMOTE (HANDSET) EXAI7248

MANUAL

Download:
Mirror Download [FCC.gov]
Document ID	391437
Application ID	KBT2AZJXXagOlSlluUHo1Q==
Document Description	MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	191.09kB (2388595 bits)
Date Submitted	2004-01-23 00:00:00
Date Available	2004-01-23 00:00:00
Creation Date	2004-01-12 08:20:42
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2004-01-13 17:10:53
Document Title	EXAI7248.book
Document Creator	PScript5.dll Version 5.2
Document Author:	ex3

EXAI 7248
SERIES
OWNER'S
MANUAL
CH04_Contents.fm
1 ページ
２００４年１月１３日
火曜日
午後２時３５分
Contents
Welcome/Features
Controls and Functions
Terms Used in this Manual
Getting Started
Installing the Phone
A. Choose the Best Location
B. Install the Rechargeable Battery Pack into the Handset
C. Connect the Base Unit and Charge the Handset
D. Mount the Base Unit on a Wall
Installing the Beltclip
Headset Installation
Basic Setup
Activating AutoTalk
Activating Caller ID on Call Waiting
Entering Your Area Code
Choosing the Dialing Mode
Setting the Language
Selecting the Ring Tone and Volume
Basics
Using Your Phone
Making and Receiving Calls
Adjusting the Earpiece Volume
Tone Dialing Switch-over
Traveling Out-of-Range
Selecting a Different Channel
Find Handset
Using Call Waiting
10
11
11
11
12
13
13
14
15
15
15
16
17
17
17
18
18
RocketDial
19
RocketDial
19
[1]
Storing the RocketDial
19
Using the Speed Dial Memory
Using the Speed Dial Memory
Storing Names and Numbers in Speed Dial Memory
Storing Caller ID messages in Speed Memory Locations
Making Calls from Speed Dial Memory
Caller ID Features
The Integrated Answering Device
The Integrated Answering Device
Turning the Answering System On/Off
Setting Up Your Answering System
Using Your Answering System
Remote Operation
Changing the Digital Security Code
Note on Power Sources
General Information
Troubleshooting
Liquid Damage
Precautions & Warranty
I.C. Notice
Index
Remote Operation Card
20
20
23
24
25
Caller ID and CIDCW (Caller ID on Call Waiting)
When the Telephone Rings
Viewing the Caller ID Message List
Deleting Information from the Caller ID List
Making a Call from the Caller ID List
Additional Information
20
25
25
26
27
28
29
29
30
31
40
45
50
50
51
53
54
57
58
60
61
www.uniden.com
EXAI7248.book
2 ページ
Welcome
２００４年１月１２日
月曜日
午後５時１３分
Congratulations on your purchase of the Uniden cordless telephone and answering system. This
phone is designed and engineered to exacting standards for reliability, long life, and outstanding
performance.
Note: Illustrations in this manual are used for explanation purposes. Some
illustrations in this manual may differ from the actual unit. The color of your
cordless phone may vary.
As an Energy Star Partner, Uniden has determined that this product or product
models meets the Energy Star guidelines for energy efficiency.
Energy Star is a U.S. registered mark.
Features
•
•
•
•
2.4GHz Extended Range Technology
3 Line Backlit Display
Caller ID and Caller ID on Call Waiting
Integrated Telephone Answering Device
(ITAD)
• Trilingual Voice Prompts (English, French
or Spanish Support)
• 10 Number Memory Dialing
• One touch RocketDial®
•
•
•
•
•
•
•
•
Last Number Redial
English, French or Spanish Support
Pulse/Tone Dialing
Find Handset
Earpiece Volume Control
Ringer Volume Control
Hearing Aid Compatible
20 Channel Autoscan
Be sure to visit our web site: www.uniden.com
Uniden® and RocketDial® are registered trademarks of Uniden America Corporation.
AutoTalk, AutoStandby, UltraClear Plus, Random Code, and AutoSecure are trademarks of
Uniden America Corporation.
www.uniden.com
[2]
EXAI7248.book
3 ページ
２００４年１月１２日
月曜日
午後５時１３分
Controls and Functions
12
13
14
15
16
17
10
11
18
19
Retrieve TAD message
with Handset Remote keys
Play
Repeat
Delete
Skip
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
Handset antenna
Jack for optional headset
Beltclip hole
Handset battery compartment
Handset earpiece
LCD display
caller id/menu key (pages 11 and 25)
/ /vol/
(earpiece volume, ringer
volume and scroll) key (pages 11, 14 and
16)
/tone/← key (left cursor) key
(pages 17 and 20)
redial/pause key (pages 16 and 22)
select/remote key (pages 11 and 48)
Rocketdial key (page 19)
talk/flash key (pages 15 and 18)
end key (pages 15 and 16)
#/→ (right cursor) key (page 20)
memory key (page 20)
delete/channel key (pages 17, 20 and 27)
Handset microphone and ringer speaker
Handset charging contacts
Stop
[3] CONTROLS & FUNCTIONS
www.uniden.com
CONTROLS & FUNCTIONS
1.
2.
3.
4.
5.
6.
7.
8.
EXAI7248.book
4 ページ
２００４年１月１２日
月曜日
午後５時１３分
20
21
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
Telephone line jack
DC IN 9V jack
Base antenna
Base speaker
(repeat/rewind) key (page 41)
memo rec (record) key (page 44)
menu/clock key (pages 31 and 32)
ringer key (page 39)
Base charging contacts
charge in use LED
(play/stop) key (pages 39 and 40)
(skip/fast forward) key (page 42)
(delete) key (page 43)
greeting key (page 38)
answer on/off key (page 30)
set key (page 31)
find hs (handset) key (pages 18 and 50)
/ /volume/select keys (pages 31 and 39)
mic (microphone)
Terms Used in this Manual
• Standby Mode - The handset may be sitting in or off the base, but is NOT in use. The talk/flash key has
not been pressed and there is no dial tone.
• Talk Mode - The handset is off the base and the talk/flash key has been pressed, enabling a dial tone.
• CID - Caller ID
• CIDCW - Caller ID on Call Waiting
• RocketDial - One touch speed dial
www.uniden.com
CONTROLS & FUNCTIONS [ 4 ]
CONTROLS & FUNCTIONS
22
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
EXAI7248.book
5 ページ
２００４年１月１２日
月曜日
午後５時１３分
G E T T I N G S TA RT E D
Installing the Phone
note
If your home has
specially wired alarm
equipment connected to
the telephone line, be
sure that installing the
system does not disable
your alarm equipment.
If you have questions
about what will disable
your alarm equipment,
contact your telephone
company or a qualified
installer.
Do the following steps:
A.
B.
C.
D.
Choose the Best Location
Install the Rechargeable Battery Pack into the Handset
Connect the Base Unit and Charge the Handset
Mount the Base Unit on a Wall
A. Choose the Best Location
When choosing a location for your new phone, here are some important guidelines you should
consider:
Avoid heat sources, such as radiators,
air ducts, and sunlight
Avoid television sets and other
electronic equipment
Avoid noise sources such as a window by
a street with heavy traffic
Avoid microwave ovens
Avoid excessive moisture,
extremely low temperatures, dust,
mechanical vibration, or shock
Choose a central location
Avoid personal computers
Avoid other cordless telephones
• The location should be close to both a phone jack and a continuous power outlet (one
which is not connected to a switch).
• The base and handset should be kept away from sources of electrical noise such as motors,
microwave ovens, and fluorescent lighting.
• The base can be placed on a desk, tabletop, or mounted on a standard wall plate.
• There should be enough space to fully extend the antenna.
[5] GETTING STARTED
www.uniden.com
EXAI7248.book
6 ページ
２００４年１月１２日
月曜日
午後５時１３分
The handset is powered by a rechargeable battery pack. The
battery recharges automatically when the handset is placed in
the base unit.
1) Press down on the handset battery case cover (use the
finger indention for a better grip) and slide the cover
downward to remove.
2) Plug the battery pack connector (red & black wires) into the
jack inside the battery compartment.
(The connector notches fit into the grooves of the jack only
one way.) Match the wire colors to the polarity label in the
battery compartment, connect the battery and listen for a
click to insure connection.
•Use only the Uniden
(BT-905)
rechargeable battery
pack supplied with
your cordless
telephone.
3) Make sure you have a good connection by slightly pulling on
the battery wires. If the connection is secure, the battery
jack will remain in place.
4) Place the battery case cover back in the handset by sliding
it upwards until it clicks into place.
www.uniden.com
•Replacement batteries
are also available
through the Uniden
Parts Department at
(800) 554-3988,
Monday through Friday
from 8:00 a.m. to 5:00
p.m. or online at
www.uniden.com
GETTING STARTED [6]
G E T T I N G S TA RT E D
B. Install the Rechargeable Battery Pack into the Handset
EXAI7248.book
7 ページ
２００４年１月１２日
月曜日
午後５時１３分
G E T T I N G S TA RT E D
C. Connect the Base Unit and Charge the Handset
•Use only the supplied
AD-314 AC adapter.
Do not use any other
AC adapter.
•Do not place the power
cord where it creates a
trip hazard or where it
could become chafed
and create a fire or
electrical hazard.
1) Connect the AC adapter to the DC IN 9V jack and to a
standard 120V AC wall outlet.
2) Place the handset in the base unit with the keypad
facing forward.
3) Make sure the charge in use LED illuminates.
If the LED does not illuminate, check to see that the
AC adapter is plugged in and the handset makes good
contact with the base charging contacts.
• Connect the AC adapter to a continuous power supply.
• Place the base unit close to the AC outlet so that you can unplug
the AC adapter easily.
4) Charge your handset at least 15-20 hours before
plugging into the phone line.
5) Once the handset battery pack is fully
charged, connect the telephone line cord to
the TEL LINE jack and a telephone outlet.
If your telephone outlet isn't modular,
contact your telephone company for
assistance.
Modular
[7] GETTING STARTED
www.uniden.com
EXAI7248.book
8 ページ
２００４年１月１２日
月曜日
午後５時１３分
G E T T I N G S TA RT E D
D. Mount the Base Unit on a Wall
Standard wall plate mounting
This phone can be mounted on any standard wall plate.
1) Locate the base unit on the wall
mount adapter as shown and slide
the wall mount adapter into the
notches on the base bottom.
2) Plug the AC adapter to the DC IN 9V
jack.
3) Route the AC adapter cord through
the molded wiring channel as shown.
4) Plug the AC adapter into a standard
120V AC wall outlet.
5) Plug the telephone line cord into the
TEL LINE jack. Route the cord
through the molded wiring channel
as shown.
6) Plug the telephone line cord into the
telephone outlet.
To remove, push up
a tab on the wall
mount adapter as
shown.
7) Align the mounting slots on the base
with the mounting posts on the wall.
Then push in and down until the
phone is firmly seated.
www.uniden.com
GETTING STARTED [8]
EXAI7248.book
9 ページ
２００４年１月１２日
月曜日
午後５時１３分
If you don't have a standard wall plate, you can mount your phone
directly to the wall. Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting
location that could cause a hazard when inserting screws into the
wall.
• Try to mount your phone within 5 feet of a working phone jack to
avoid excessive cord lengths.
• Make sure the wall material is capable of supporting the weight of
the base and handset.
• Use #10 screws (minimum length of 1-3/8 inches) with anchoring
devices suitable for the wall material where the base unit will be
placed.
1) Insert two mounting screws into the wall, (with their appropriate anchoring device), 315/16 inches apart. Allow about 1/8 of an inch between the wall and screw heads for
mounting the phone.
2) Refer to step 1 through 7 on page 8 to mount the telephone.
Installing the Beltclip
To attach the beltclip
Insert the beltclip into the holes on each side of the handset. Press down until it clicks.
To remove the beltclip
Pull both sides of the beltclip to release the tabs from the holes.
[9] GETTING STARTED
www.uniden.com
G E T T I N G S TA RT E D
Direct wall mounting
EXAI7248.book
10 ページ
２００４年１月１２日
月曜日
午後５時１３分
G E T T I N G S TA RT E D
Headset Installation
Your phone may be used with an optional headset, the Uniden HS910.
To use this feature, insert the headset plug into the headset jack.
Your phone is ready for hands-free conversations.
(Headset may be purchased by calling the Uniden Parts Department or
visiting the web site. See page 53.)
www.uniden.com
GETTING STARTED [10]
EXAI7248.book
11 ページ
２００４年１月１２日
月曜日
午後５時１３分
There are five basic options that you will need to set up: AutoTalk, CIDCW (Caller ID on Call
Waiting), Area Code, Dial Mode and Language.
Activating AutoTalk
AutoTalk allows you to answer the phone simply by removing the handset from the base. You
do not have to press any keys.
1) When the phone is in standby mode, press and hold the caller id/
menu key. The following screen appears.
2) Press the select/remote key to turn AutoTalk on.
3) Press the end key to complete the setting. The handset returns to standby mode.
Activating Caller ID on Call Waiting
Caller ID allows you to see the name and number of the calling party before you answer the
phone. Caller ID on Call Waiting (CIDCW) lets you see the name and number of a call that
comes in when you are on the line.
You must subscribe to Caller ID service through your local telephone provider to use this
feature.
1) When the phone is in standby mode, press and hold the caller id/
menu key. The following screen appears.
[11] GETTING STARTED
www.uniden.com
G E T T I N G S TA RT E D
Basic Setup
EXAI7248.book
12 ページ
月曜日
key to select
C IDC W.
/vol/
午後５時１３分
3) Press the select/remote key to toggle and turn on Caller ID on Call
Waiting.
4) Press the end key and return the handset to the base unit to complete the setting. The
handset returns to standby mode.
Entering Your Area Code
If you enter a 3-digit area code number in the Ar ea Cod e option, your local area code does not
appear in Caller ID messages. Do not program this option if your calling area requires 10-digit
dialing. When reviewing Caller ID messages, you will see only the local seven digit number. For
calls received from outside your local area code, you will see a full 10-digit number.
1) When the phone is in standby mode, press and hold the caller id/
menu key. The following screen appears.
2) Press the
/vol/
key twice to select
Ar ea Cod e .
3) Press the select/remote key. If an area code was already stored,
the phone will display it.
4) Use the number keys (0 - 9) to enter the 3-digit area code. If you
make an error, use the delete/channel key to backspace.
5) Press the select/remote key. A confirmation tone sounds.
www.uniden.com
GETTING STARTED [12]
G E T T I N G S TA RT E D
2) Press the
２００４年１月１２日
EXAI7248.book
13 ページ
２００４年１月１２日
月曜日
午後５時１３分
note
•If you are not sure of
your dialing system,
make a trial call. If the
call connects, leave
the setting as is.
Otherwise, set for
pulse dialing.
•If your phone system
requires pulse dialing
and you need to send
DTMF tones during a
call, you can
temporarily switch
over to tone dialing.
(Refer to “Tone Dialing
Switch-over” on
page 17.)
Choosing the Dialing Mode
Most phone systems use tone dialing. However some phone systems (such as in rural areas)
still use pulse dialing. Your Uniden phone supports both tone and pulse dialing. The default
setting is tone dialing. If your phone system uses pulse dialing, follow the steps below to
change the dialing mode:
1) When the phone is in standby mode, press and hold the caller id/
menu key. The following screen appears.
2) Press the
/vol/
key three times to select
D ial .
3) Press the select/remote key to set the phone to pulse dialing.
4) Press the end key to complete the setting. The handset returns to
standby mode.
Setting the Language
There are three languages to choose from; English, French and Spanish.
1) When the phone is in standby mode, press and hold the caller id/
menu key. The following screen appears.
2) Press the
[13] GETTING STARTED
/vol/
key four times to select
Lan gua ge .
www.uniden.com
G E T T I N G S TA RT E D
6) Press the end key to complete the setting. The handset returns to standby mode.
EXAI7248.book
14 ページ
２００４年１月１２日
月曜日
E ng , Fr.
or
Es p.
4) Press the end key to complete the setting. The handset returns to
standby mode.
Selecting the Ring Tone and Volume
Your phone has five different ringer tone/volume combinations you can choose from.
1) With the phone in standby mode, press the
/vol/
or
/vol/
key.
2) The phone will sound the different ring tones at different volumes.
3) When the phone sounds the ring tone and volume you wish to use, press the end key.
www.uniden.com
GETTING STARTED [14]
G E T T I N G S TA RT E D
3) Press the select/remote key to select
午後５時１３分
EXAI7248.book
15 ページ
２００４年１月１２日
月曜日
午後５時１３分
Using Your Phone
Making and Receiving Calls
Making a call
BASICS
1) Remove the handset from the base.
2) Press the talk/flash key.
3) Listen for the dial tone.
4) Dial the number.
OR
1) Remove the handset from the base.
2) Dial the number.
3) Press the talk/flash key.
Receiving a call
note
Refer to page 11
"Basic Setup" to turn on
the AutoTalk feature if
desired.
[15] BASICS
1) Remove the handset from the base. (If AutoTalk is on, the phone will automatically
answer the call when you pick it up.)
2) Press the talk/flash key.
OR
1) If the handset is off the base, press the talk/flash key or any number key. (AutoTalk is
on.)
Hanging up
Press the end key or return the handset to the base.
www.uniden.com
EXAI7248.book
16 ページ
２００４年１月１２日
月曜日
午後５時１３分
Redialing the last dialed number
1) Remove the handset from the base.
2) Press the talk/flash key.
3) Listen for the dial tone.
4) Press the redial/pause key.
OR
1) Remove the handset from the base.
2) Press the redial/pause key.
3) Press the talk/flash key.
Adjusting the Earpiece Volume
/vol/
or
BASICS
To change the earpiece volume, press the
key during a call.
/vol/
Temporarily Mute Ringer
If the handset is off the base while an incoming call is ringing,
simply press the end key to temporarily mute the incoming ring.
The ringer will sound with the next incoming call.
www.uniden.com
BASICS [16]
EXAI7248.book
17 ページ
２００４年１月１２日
月曜日
午後５時１３分
Tone Dialing Switch-over
note
If your phone is set to pulse dialing mode, make your call
normally. Once your call connects, press the /tone/← key. Any
digits you enter from then on will be sent as tone digits. When
this particular call ends, the phone automatically returns to pulse dialing mode.
Traveling Out-of-Range
During a call, as you begin to move your handset too far from your base unit, noise
increases. If you pass the range limits of the base unit, your call will terminate within one
minute.
Selecting a Different Channel
If you encounter interference while using your phone, you can manually change the phone´s
channel for clear operation. While using your phone, press the delete/channel key. Scanning
appears on the display, indicating the phone is changing to another channel. For more
information on interference, refer to "Precautions" on page 59.
[17] BASICS
www.uniden.com
BASICS
The UltraClear PlusTM
true compander circuitry
virtually eliminates
background noise. This
innovative technology,
together with 20
different channels,
provides you with the
best possible reception
during all your
conversations.
If your telephone company requires pulse dialing, you can switchover to tone dialing after the call connects. This feature is useful
when you need tone dialing to use any automated menu systems,
such as telephone bank tellers, telephone prescription refills,
customer support menus, etc.
EXAI7248.book
18 ページ
２００４年１月１２日
月曜日
午後５時１３分
Find Handset
To locate the handset, press the find hs key on the base. The
handset beeps for 60 seconds.
Paging is canceled when pressing any handset key, the find hs
key on the base or the handset is returned to the base.
Paging is also canceled when the phone receives an incoming
call.
BASICS
Using Call Waiting
If you have Call Waiting service, you can receive calls while on
the line.
1) If a call comes in while you are on the phone, you will hear a
call waiting tone. If you have CIDCW activated, you will see
the name and number of the incoming caller.
2) Press the talk/flash key to accept the waiting call. After a
short pause, you will hear the new caller.
3) To return to the original caller, press the talk/flash key again.
You must subscribe through your local telephone company to receive Call Waiting
service.
www.uniden.com
BASICS [18]
EXAI7248.book
19 ページ
２００４年１月１２日
月曜日
午後５時１３分
RocketDial
RocketDial is a one-touch speed dial key. Store your most
important or most frequently called number as your RocketDial
number. Then, simply press the Rocketdial key, and your phone
will automatically dial the number.
Storing the RocketDial
1) When the phone is in standby mode, press and hold the
Rocketdial key. The following display appears.
If the RocketDial number is already programmed, the Edit screen
appears. You can select Edit to edit this entry, select Delete to
erase this entry or select Go Back to return to the standby mode.
2) Store the number by following step 6 under “Storing Names and
Numbers in Speed Dial Memory” on page 20.
[19] ROCKETDIAL
Number Stored
appears.
ROCKETDIAL
3) Press the select/remote key.
You hear a confirmation tone, and
Memory storage is complete.
www.uniden.com
EXAI7248.book
20 ページ
２００４年１月１２日
月曜日
午後５時１３分
The speed dial memory allows you to store up to 10 names and numbers in the handset. You
can dial these numbers with just a few key presses.
The speed dial memory is not limited to phone numbers. You can store any number (up to 20
digits) that you need to enter once your call connects. This is referred to as Chain Dialing.
For example, you can save your bank account number to speed dial memory. When you call
your bank's telephone teller service and are prompted to enter your account number, simply
press the memory key and the speed dial number where you stored your account number.
Then press the select/remote key.
Storing Names and Numbers in Speed Dial Memory
note
When editing the speed
dial memory, you must
press a key within 30
seconds or the phone
will return to standby
mode. If you return the
handset to the base, the
phone will return to
standby mode also.
1) With the phone in standby mode, press the memory key.
2) Enter 0-9 to select the speed dial number where you would like to
store this entry. You can also scroll through the list with the
keys. Press the select/remote key twice.
vol/ and /vol/
3) Store Name appears and a cursor flashes indicating that the
display is ready for the name to be entered.
If the selected speed dial number is already assigned, the Edit
screen appears. You can select Edit to edit this entry, select
Delete to erase this entry, or select Go Back to choose another
speed dial number.
www.uniden.com
USING THE SPEED DIAL MEMORY [20]
US I NG T H E S P E E D D IA L M E M O RY
Using the Speed Dial Memory
EXAI7248.book
21 ページ
If the next character
uses the same number
key, you must press the
#/→ key to move the
cursor over. Otherwise
the next time you press
the number key, it
changes the character
that was previously set.
月曜日
午後５時１３分
4) Enter a name according to the instructions below, then press the select/remote key. If no
name is required, go to step 5.
• The name can be up to 13 characters.
• Use the #/→ and /tone/← keys to move the cursor to the desired location.
• Use the delete/channel key to delete characters as needed.
• Press and hold the delete/channel key to delete all the characters.
Refer to the letters on the number keys to select the desired characters.
With each press of a numeric key, the displayed character appears in the following order:
Upper case letters first, lower case letters next and finally the number corresponding to
the key.
If you make a mistake while entering a name
Use the /tone/← or #/→ key to move the cursor to the incorrect character.
Press the delete/channel key to erase the wrong character. Then enter the correct
character. To delete all characters, press and hold the delete/channel key.
For example, to enter Movies.
1) Press 6. Then press the #/→ key to
move the cursor to the right.
2) Press 6 six times.
3) Press 8 six times.
4) Press 4 six times.
5) Press 3 five times.
6) Press 7 eight times.
Number of times key is pressed
keys
2abc
3def
4ghi
5jkl
6mno
7pqrs
8tuv
9wxyz
0 oper
[21] USING THE SPEED DIAL MEMORY
www.uniden.com
US I NG T H E S P E E D D IA L M E M O RY
note
２００４年１月１２日
EXAI7248.book
22 ページ
２００４年１月１２日
月曜日
午後５時１３分
6) Use the keypad to enter the phone number; each number can be
up to 20 digits.
If you need the phone to pause during the dialing sequence, press
the redial/pause key to insert a two-second delay between the
numbers. You can enter multiple pauses to increase the delay.
Each pause counts as a digit. The display shows a P for every
pause.
US I NG T H E S P E E D D IA L M E M O RY
5) Store Number is displayed. The cursor flashes indicating that the
display is ready for the number to be entered.
When storing numbers into memory, if the handset is idle (i.e., no key is pressed) for more
than 30 seconds, it will beep rapidly, and the phone will return to standby mode.
7) Press the memory key. You will hear a confirmation tone, and the
following screen appears.
Memory storage is complete.
After about 2 seconds, the following screen displays all the speed
dial memory entries.
www.uniden.com
USING THE SPEED DIAL MEMORY [22]
USING THE SPEED
DIAL MEMORY
8) Press the end key to exit memory setup mode. The phone returns
to standby.
EXAI7248.book
23 ページ
２００４年１月１２日
月曜日
午後５時１３分
note
You cannot store a
Caller ID message if no
phone number appears
in the message.
Messages (Caller ID names/numbers) shown in the Caller ID list can be stored in memory
dialing. For instructions on viewing the Caller ID Message list, see page 26.
1) Press the caller id/menu key. Select the phone number to be
/vol/ or /
stored from the Caller ID list by pressing the
vol/ key.
2) Press the memory key.
3) Enter a number (0 - 9) or press the
location to be stored.
/vol/
or
/vol/
key to select the memory
4) Press the select/remote key. You hear a confirmation tone, and
the number is stored in memory. The display returns to the Caller
ID list.
If a message has already been stored in the selected memory
number location, a confirmation screen is displayed.
key to select Yes. Press the select/remote
/vol/
Press the
key to overwrite. The display returns to the Caller ID list.
[23] USING THE SPEED DIAL MEMORY
www.uniden.com
US I NG T H E S P E E D D IA L M E M O RY
Storing Caller ID messages in Speed Memory Locations
EXAI7248.book
24 ページ
２００４年１月１２日
月曜日
午後５時１３分
1) Press the memory key. The handset displays your programmed
speed dial number.
/vol/
2) Enter the number (0 - 9), or press the /vol/ or
key to select the speed dial number you would like to dial.
US I NG T H E S P E E D D IA L M E M O RY
Making Calls from Speed Dial Memory
3) Press the talk/flash key. Talk and the number selected appear on
the display. Then the displayed number is dialed.
To cancel speed dialing
Press the end key to cancel speed dialing. The handset returns to standby mode.
Also, if the handset is idle (e.g., no key is pressed) for 30 seconds, the phone returns to
standby mode.
USING THE SPEED DIAL MEMORY [24]
USING THE SPEED
DIAL MEMORY
www.uniden.com
EXAI7248.book
25 ページ
２００４年１月１２日
月曜日
午後５時１３分
Caller ID and CIDCW (Caller ID on Call Waiting)
note
•When the call is
received via a
telephone company
that does not offer
Caller ID service, the
caller´s phone number
and name do not
appear. (This includes
international calls.)
•When the call is via a
private branch
exchange (PBX), the
caller´s phone number
and name may not
appear.
When the Telephone Rings
When the Caller ID message is received, the display shows the caller´s phone number along
with the date and time. The incoming call information is stored in the Caller ID record. If the
Caller ID service includes the caller´s name, the caller´s name appears on the display (up to
15 letters).
The date and
time received
Caller's name
Caller's phone number
You may receive any one of the following messages:
When invalid data is received
Incomplete Data
When a private name is received
Private Name
When a private number is received Private Number
When a unknown name is received
Unknown Name
When a unknown number is received Unknown Number
Data errors appear as ¨ ¨.
[25] CALLER ID FEATURES
www.uniden.com
C A LL E R ID FE AT U R E S
•If you answer a call
before the Caller ID
message is received
(for example, before
the second ring), the
Caller ID message will
not appear.
You must subscribe to Caller ID service through your local telephone provider to use
this feature. When the telephone rings, the Caller ID feature allows you to view the caller’s
name, phone number, date and time of call. With CIDCW (Caller ID on Call Waiting), you will
hear a Call Waiting tone while you are on a call, and the Caller ID data is displayed. To accept
the waiting call, press the talk/flash key (see page 18).
Additionally, you can dial a number stored in the Caller ID list or save data to your Memory
dial list.
EXAI7248.book
26 ページ
２００４年１月１２日
月曜日
午後５時１３分
Viewing the Caller ID Message List
The Caller ID list stores information for up to 30 incoming calls - even unanswered calls.
1) With the phone in standby mode, press the caller id/menu key.
The summary screen appears. The screen shows the number of new
messages and total messages.
3) Press the end key to return to standby mode.
•In Caller ID operation,
if no key is pressed for
more than 30 seconds,
an error tone sounds
and the telephone
returns to standby
mode.
•Each message can be
up to 15 characters for
the name and 15 digits
for the phone number.
•The number of calls
from the same Caller ID
appears next to the
received time. Once
you view the new
message, the number
will be cleared and
disappear.
www.uniden.com
CALLER ID FEATURES [26]
C A LL E R ID FE AT U R E S
2) To view the Caller ID messages in historical order (from new to
old or from old to new), repeatedly press the /vol/
key to
scroll through the messages from the latest to the earliest, or the
/vol/ key to scroll back through the messages.
note
EXAI7248.book
27 ページ
２００４年１月１２日
月曜日
午後５時１３分
Deleting Information from the Caller ID List
note
•If you get an incoming
call or page, the
deleting operation is
canceled, and you can
answer the call or
page.
Deleting a Caller ID Message
1) Press the caller id/menu key in standby mode. Find the message
to be deleted from the Caller ID list by pressing the /vol/ or
/vol/ key.
C A LL E R ID FE AT U R E S
•While using the Delete
All? or Delete
Message? screen, if no
key is pressed for more
than 30 seconds, an
error tone sounds, and
the handset returns to
standby mode.
The cordless phone stores up to 30 Caller ID names/numbers. If the phone receives the 31st
Caller ID, the oldest one in the list is automatically deleted. Caller ID data can also be
deleted manually.
2) Press the delete/channel key.
/vol/
3) Press the
or /vol/
press the select/remote key.
key to select
Yes,
and then
Deleting all Caller ID names/numbers
1) With the phone in standby mode, press the caller id/menu key.
2) Press the delete/channel key.
or /vol/ key to select Yes, and then
/vol/
3) Press the
press the select/remote key.
You hear a confirmation tone and all stored Caller ID messages are
deleted.
[27] CALLER ID FEATURES
www.uniden.com
EXAI7248.book
28 ページ
２００４年１月１２日
月曜日
午後５時１３分
Making a Call from the Caller ID List
You can place a call from the Caller ID list.
1) Press the caller id/menu key in standby mode. Select the phone
or
number that you want to dial by pressing the /vol/
vol/ key.
note
2) To have the phone dial a "1 " before the displayed Caller ID number, press 1. To have the
phone dial the stored area code before the displayed Caller ID number, press 3.
3) Press the talk/flash key. The displayed phone number dials automatically.
www.uniden.com
CALLER ID FEATURES [28]
C A LL E R ID FE AT U R E S
You cannot make a call
from the Caller ID list if
your cordless phone is
connected to a private
branch exchange (PBX).
EXAI7248.book
29 ページ
２００４年１月１２日
月曜日
午後５時１３分
The Integrated Answering Device
The cordless phone has a built-in answering system that answers and records incoming calls.
You can also use your answering system to record a conversation, leave a voice memo
message, or to announce a special outgoing message to callers when you're away from your
phone.
Features
•
•
•
•
•
Digital Tapeless Recording
Retrieve Messages Using Handset
Up to 13 Minutes of Recording Time
Call Screening
Personal or Pre-recorded Outgoing
Message
• Voice Prompts
(English, French or Spanish)
•
•
•
•
•
•
Time and Day Announcement
Remote Message Retrieval
Toll Saver
Conversation Recording
Voice Memo
Selectable Ringer Options
(High, Low or Off)
Digital Tapeless Recording allows you to quickly review, save, or delete any messages you
choose. You will never have to worry about a tape wearing out, jamming, or resetting
improperly.
[29] THE INTEGRATED ANSWERING DEVICE
www.uniden.com
T H E I N T E GR AT E D
ANSWERING DEVICE
The Integrated Answering System is easy and convenient to use, but please read through all
of the instructions carefully.
EXAI7248.book
30 ページ
２００４年１月１２日
月曜日
午後５時１３分
Turning the Answering System On/Off
1) To turn the answering system on, press the answer
on/off key. The system will announce "Answering
system is on." The current greeting message will
be played, and you hear a confirmation tone. The
message counter displays the number of messages
stored in memory. If the display flashes, there are
new messages waiting for you.
2) To turn the answering system off, press the answer
on/off key again. After the announcement
“Answering system is off,” the message counter
display will no longer be illuminated. To turn the
answering system back on, press the answer on/
off key.
THE INTEGRATED ANSWERING DEVICE [30]
T H E I N T E G R AT E D
ANSWERING DEVICE
www.uniden.com
EXAI7248.book
31 ページ
２００４年１月１２日
月曜日
午後５時１３分
Setting Up Your Answering System
note
Answering System Settings
To set the following six functions you must enter the menu mode.
•For your convenience,
voice prompts will
guide you through the
menu mode.
•After the setting, press
the
(play/stop)
key to exit the menu
mode, or the menu/
clock key to move to
the next menu option.
menu/clock
"Time"
menu/clock
"Security Code"
menu/clock
"Ring Time"
menu/clock
"Record Time"
menu/clock
"Message Alert"
menu/clock
"Language"
menu/clock
[31] THE INTEGRATED ANSWERING DEVICE
www.uniden.com
T H E I N T E GR AT E D
ANSWERING DEVICE
Return to standby
with tone sounds.
• To scroll through the menu options, repeatedly press
the menu/clock key in standby mode. The system
returns to standby after the last menu option. You
hear a confirmation tone to indicate standby mode.
• If any of the following occurs during menu setup, the
system returns to standby; you will have to start over
with the procedure you were performing.
-The talk/flash key is pressed
-The
(play/stop) key is pressed
-10 seconds elapse without a key press
-An incoming call is received
• If the system remains idle for about five seconds after
the announcement, the system returns to standby.
Once the
or /volume/select key is pressed, the
idle time is extended to 10 seconds.
EXAI7248.book
32 ページ
２００４年１月１２日
月曜日
午後５時１３分
Setting the Time
The clock on the cordless phone’s answering system starts when power is supplied to the
base. Follow these steps to set the clock to the correct time.
1) With the phone in standby mode, press the menu/
clock key.
The system announces “Time,” the current time and the
guidance for setting the time.
2) Press the
or /volume/select key until the correct
day is announced. The numbers [ ] through [ ] are
displayed on the base.
3) Press the set key to select the day.
4) Press the
or /volume/select key until you hear
the correct hour setting. The numbers [ ] through
[ ] are displayed on the base.
note
•Normally, the system
will return to standby
if it remains idle for 10
seconds after the
or
/volume/select
key is pressed. For
setting the time,
however, the idle time
is extended to two
minutes.
•Press and hold the
/volume/select
or
key to quickly scroll
through the numbers
on the display.
6) Press the
or /volume/select key until you hear
the correct minute setting.
The numbers [ ] through [ ] are displayed on the
base.
www.uniden.com
THE INTEGRATED ANSWERING DEVICE [32]
T H E I N T E G R AT E D
ANSWERING DEVICE
5) Press the set key to select the hour.
EXAI7248.book
33 ページ
２００４年１月１２日
月曜日
午後５時１３分
7) Press the set key to select the minute.
8) Press the
or /volume/select key until you hear the correct AM or PM setting.
The message counter displays [ ] or [ ].
9) Press the set key to select the AM/PM setting.
You hear a confirmation tone. Then the announcement "Time" and the day and time are
announced for your review. After a few seconds, the system announces “To set security code,
press menu again.”
Setting a Personal Security Code (PIN)
note
The PIN code is set to
"80" when you purchase
the cordless phone.
To play your messages from a remote location, you need to enter a two-digit Personal
Identification Number (PIN) code (01-99). To select a PIN, perform the following steps:
1) With the phone in standby mode, press the menu/clock key twice.
The system announces "Security code," and the current PIN code is announced as it is
displayed on the base. Then the system announces the guidance for setting the PIN code.
2) Press the
or
/volume/select key until the desired number appears.
[33] THE INTEGRATED ANSWERING DEVICE
www.uniden.com
T H E I N T E GR AT E D
ANSWERING DEVICE
3) Press the set key to select the PIN code. You hear a confirmation tone, then the
announcement "Security code" followed by the new PIN code. After a few seconds, the
system announces “To set ring time, press menu again.”
EXAI7248.book
34 ページ
２００４年１月１２日
月曜日
午後５時１３分
Setting the Ring Time
The ring time setting allows you to set the number of rings the caller hears before your
answering system plays the outgoing message. You can set the ring time to answer after two,
four, or six rings. Setting [
] (Toll Saver), the answering system picks up after two rings if
you have new messages, and after four rings if there are none. This way, if you make a long
distance call to check your messages, you can hang up after the second ring to avoid billing
charges.
1) With the phone in standby mode, press the menu/clock key three times.
You hear "Ring time" and the current ring time ([ ] 2, [ ] 4, [ ] 6, [
] Toll saver),
and it is displayed on the base. Then you hear the guidance for setting the ring time.
2) Press the
or
/volume/select key until the desired ring time appears.
3) Press the set key to select the new ring time. You hear a confirmation tone, then the
announcement "Ring time" followed by the new ring time. After a few seconds, the system
announces "To set record time, press menu again."
THE INTEGRATED ANSWERING DEVICE [34]
T H E I N T E G R AT E D
ANSWERING DEVICE
www.uniden.com
EXAI7248.book
35 ページ
２００４年１月１２日
月曜日
午後５時１３分
Selecting the Message Record Time
note
After setting the
Announce only feature,
you may want to change
your outgoing message
not to prompt the caller
to leave a message.
However, the
prerecorded message
changes automatically.
You have three record time options. The options "One minute" or "Four minutes" set the
duration for recording the incoming messages. "Announce only" answers the call with the
preset greeting or your personal greeting but prevents the caller from leaving a message.
1) With the phone in standby mode, press the menu/clock key four times.
You hear "Record time" and the current recording time ([ ] one minute, [ ] four
minutes, [ ] Announce only, No recording), and it is displayed on the base.
Then you hear the guidance for setting the record time.
2) Press the
or
/volume/select key until the desired time appears.
3) Press the set key to select the new recording time. You hear a confirmation tone, then the
announcement "Record time" followed by the new recording time. After a few seconds, the
system announces "To set message alert, press menu again."
▼ Announce only feature
The announce only feature plays a prerecorded outgoing message, and will not allow the
caller to leave a message. To set "Announce only," follow the steps above.
To scroll between the prerecorded message or your own personal greeting, press the greeting
key when the outgoing message is played. If you want to use your own greeting or want to
omit the prompt "to leave a message" from your greeting, refer to "Recording a personal
outgoing message (Greeting)" on page 38.
[35] THE INTEGRATED ANSWERING DEVICE
www.uniden.com
T H E I N T E GR AT E D
ANSWERING DEVICE
Your system comes with a prerecorded announce only greeting; “Hello, no one is available to
take your call. Please call again.“
EXAI7248.book
36 ページ
２００４年１月１２日
月曜日
午後５時１３分
Setting the Message Alert Tone
Message Alert feature lets you know you have new messages by sounding a short beeping
tone. If you set the Message Alert to on when a new message is received, the alert tone will
sound every 15 seconds.
1) With the phone in standby mode, press the menu/clock key five times.
You hear "Message alert" and the current setting ([
] On), and it is
] Off or [
displayed on the base. Then you hear the guidance for setting the Message Alert Tone.
2) Press the
or
/volume/select key to make your selection.
3) Press the set key to select the new setting. You hear a confirmation tone, then the
announcement "Message alert" followed by the current setting you have selected. After a
few seconds, the system announces "To set language, press menu again."
When the first new message is received, the alert tone will begin to sound.
You can also turn off the Message Alert tone by pressing any key on the base unit. The tone
will deactivate until another new message is received.
When all new messages are played back using the remote playback feature (see page 45,)
the Message Alert tone will automatically deactivate. The tone will not deactivate until all
messages are played back.
www.uniden.com
THE INTEGRATED ANSWERING DEVICE [36]
T H E I N T E G R AT E D
ANSWERING DEVICE
Turning Message Alert tone off when you’re away from your phone:
EXAI7248.book
37 ページ
２００４年１月１２日
月曜日
午後５時１３分
Selecting the Language
The answering system voice announcements can be heard in English, French or Spanish.
To choose the language of the answering system voice announcements:
1) With the phone in standby mode, press the menu/clock key six times.
You hear the announcement "Language, English" followed by the voice prompts for setting
the language. The current setting ([ ], [ ] or [ ]) appears on the base.
2) Press the
or
/volume/select key to select the desired language.
3) Press the set key. A confirmation tone is heard along with the setting in the language
selected.
Setting Your Outgoing Message (Greeting)
When you receive a call, the answering system automatically plays either a preset message or
your own greeting.
▼Preset message
See “Selecting the Message Record Time” on page 35 on how to set the announce only
feature.
[37] THE INTEGRATED ANSWERING DEVICE
www.uniden.com
T H E I N T E GR AT E D
ANSWERING DEVICE
The following message is prerecorded:
"Hello, no one is available to take your call. Please leave a message after the tone."
EXAI7248.book
38 ページ
２００４年１月１２日
月曜日
午後５時１３分
▼Recording a personal outgoing message (Greeting)
1) Press and hold the greeting key in standby mode.
You hear the announcement " Record greeting" and a confirmation tone.
] flashes on the message counter.
2) Start recording your message. You have 30 seconds, and the message counter starts to
count down [ ] to [ ] every second.
(play/stop) or set
3) When you are finished recording your greeting, press the greeting,
key. You hear a confirmation tone, and then your greeting plays back for you.
▼Choosing between the two outgoing messages
With the phone in standby mode, press the greeting key. Then press the greeting key again
while the outgoing message is played. This switches between the prerecorded greeting and
the personal greeting. After finishing playing back the message, a confirmation tone is
heard.
note
•Your greeting must be
more than 2 seconds
and less than 30
seconds to record.
•Position yourself as
near to the base’s
microphone as possible
and speak clearly when
recording your
outgoing message.
To delete the personal Greeting, press the
(delete) key during the announcement and
the system announces "Greeting has been deleted."
THE INTEGRATED ANSWERING DEVICE [38]
T H E I N T E G R AT E D
ANSWERING DEVICE
www.uniden.com
EXAI7248.book
39 ページ
２００４年１月１２日
月曜日
午後５時１３分
Setting the Base Ringer Volume
note
Although you have set
the base ringer to off,
you will still hear the
ringer from the handset
on the base if its ringer
is on.
You will hear three ringer options. One allows you to turn the ringer off. The other two are volume
levels. You can change the ringer volume while in standby mode or the incoming call is ringing.
1) Press the ringer key.
You hear the ringer at the current volume level ([
high, [
] low, [
] off) (if you set the base ringer
volume to off, " Ringer off " is announced) and it is
displayed on the base.
2) Press the ringer key repeatedly until the desired ringer
option appears.
3) The system displays the new ringer volume.
Temporarily Mute the Base Ringer and Call Screen
Press the
(play/stop) key to temporarily mute the incoming ring and call screen. The
ringer will sound with the next incoming call. To turn the ringer back on for this call, press
the ringer key. To hear the answering machine and screen this call, press the
or /volume/select key.
You can adjust the volume of the base speaker by pressing the
or /volume/select key
on the base. Press the /volume/select key for louder or the /volume/select key for
softer while the base speaker is being used except for menu mode. The numbers [ ] -[ ]
are displayed on the base indicating the volume levels. [ ] being the softest and [ ] being
the loudest.
[39] THE INTEGRATED ANSWERING DEVICE
www.uniden.com
T H E I N T E GR AT E D
ANSWERING DEVICE
Adjusting the Speaker Volume Level
CH14 Answering.fm
40 ページ
２００４年１月１３日
火曜日
午後１時１４分
Using Your Answering System
The message counter displays the number of messages stored in memory. If the display
flashes, new messages are waiting for you. The flashing number represents the number of new
messages, not total messages. The cordless phone plays the new messages first; after all the
new messages are played, you can play the old messages.
When the answering system is full, [
] is displayed on the base, and the system
announces "No remaining time." You should delete some messages so that the system can
record new messages. (Refer to “Deleting a Message” on page 43.)
Playing Your Messages
1) With the phone in standby mode, press the
(play/
stop) key. The system announces the number of new
and old messages. The LED displays the number of new
messages, and the number flashes. The day and time
that each message was received is announced after the
message is played. The message counter displays the
number of current messages stored.
hint
To stop playing your
messages, press the
(play/stop) key again at
any time.
www.uniden.com
THE INTEGRATED ANSWERING DEVICE [40]
T H E I N T E G R AT E D
ANSWERING DEVICE
2) When all new messages have been played, you hear a
confirmation tone and an announcement “End of
messages.” The system returns to standby.
EXAI7248.book
41 ページ
２００４年１月１２日
月曜日
午後５時１３分
3) After you have reviewed your new messages, you can play your old messages by pressing
the
(play/stop) key again. Once you have listened to a new message, it becomes an
old message. The old messages will be played in the order in which they were received.
Reviewing Messages using Handset
1) With the phone in standby mode, press the select/remote key on the handset. R emot e
Answ eri ngM ach ine op era tio n appears on the display. The answering system announces
the current time and the number of messages stored in the memory.
2) You hear "To play incoming message, press two. For help, press zero."
You hear intermittent beeps.
/2 key and you can review your messages. When you are finished, hang up to
3) Press the
exit the system.
Repeating a Message
1) With the phone in standby mode, press the
(play/stop) key to review your messages.
The number of stored messages are announced.
[41] THE INTEGRATED ANSWERING DEVICE
www.uniden.com
T H E I N T E GR AT E D
ANSWERING DEVICE
2) To repeat the current message, press the
(repeat/rew) key after a few seconds of
beginning the message. To quickly scroll backwards through a message, press and
hold the
(repeat/rew) key. To repeat the previous message, press the
(repeat/rew)
key within a few seconds (about 4 seconds during remote operation) after a message
begins playing. If you have several messages, press the
(repeat/rew) key repeatedly
until you return to the message you want to replay. If the current message is the first new
message, the system plays back from the beginning of the current message (it does not go
back into the old message group).
EXAI7248.book
42 ページ
3) Press the
standby.
２００４年１月１２日
月曜日
午後５時１３分
(play/stop) key at any time to stop reviewing messages and return to
Skipping a Message
1) With the phone in standby mode, press the
The number of messages is announced.
(play/stop) key to review your messages.
2) Press the
(skip/ff) key at anytime to skip to the next message.
Each time the
(skip/ff) key is pressed, the system scans forward one message.
If you have several messages, press the
(skip/ff) key repeatedly to find the message
you want to play. To quickly scroll forward through a message, press and hold the
(skip/ff) key.
3) Press the
(play/stop) key at any time to stop reviewing your messages and return to
standby. The message counter shows the number of messages stored in memory.
THE INTEGRATED ANSWERING DEVICE [42]
T H E I N T E G R AT E D
ANSWERING DEVICE
www.uniden.com
EXAI7248.book
43 ページ
２００４年１月１２日
月曜日
午後５時１３分
Deleting a Message
To maintain maximum record time, delete the old
messages. When you press the
(delete) key, you are
permanently deleting the message. Once deleted, the
message cannot be replayed.
1) Press the
2) Press the
to delete.
(play/stop) key to review your messages.
(delete) key anytime during the message
3) You hear a confirmation tone and the message is
deleted.
You can also delete all the messages.
1) With the phone in standby mode, press the
(delete)
key. You hear an announcement “To delete all
messages, press delete again.”
When you try to delete all messages without first listening to your new messages, you hear
several short beeps followed by an announcement “Please playback all messages.” This
protects you from accidentally erasing messages you have not yet reviewed.
[43] THE INTEGRATED ANSWERING DEVICE
www.uniden.com
T H E I N T E GR AT E D
ANSWERING DEVICE
2) Press the
(delete) key again.
You hear a confirmation tone and [ ] is displayed on
the base. All the messages are deleted.
EXAI7248.book
44 ページ
２００４年１月１２日
月曜日
午後５時１３分
Voice Memo
The voice memo function allows you to record messages as
shorts as two seconds and as long as four minutes.
1) With the phone in standby mode, press and hold the
memo rec key.
You hear an announcement “Record memo message”
and a tone. [
] flashes on the message counter.
2) Start your recording.
3) When you have finished, press the
(play/stop),
memo rec or set key to stop recording. You hear a
confirmation tone, and the system returns to standby.
Recording a Conversation
You can record up to 10 minutes of conversation while you are using your phone. Any
conversation that lasts less than two seconds will not be recorded.
If you receive a call waiting tone while recording a conversation, press the talk/flash
key to accept the waiting call. The recording feature continues recording the new call.
The original call is put on hold.
2) To stop recording, press the
You hear a confirmation tone.
www.uniden.com
(play/stop) or memo rec key.
•The voice memo
recorded is completely
independent of the
greeting message.
•The voice memo
messages are recorded
as incoming messages.
•When the answering
system is full, [
appears on the
message counter, and
recording is
terminated.
•A recorded
conversation is treated
as a incoming message
and will be added to
the stored messages.
•When recording a
conversation, all
dialing features except
for using call waiting
(see page 18) are
disabled.
Stop recording if you
need to enable any
other handset keys.
THE INTEGRATED ANSWERING DEVICE [44]
T H E I N T E G R AT E D
ANSWERING DEVICE
1) During a conversation from the handset, press and hold the memo rec key.
The unit begins recording with a confirmation tone and [
] flashes on the
message counter.
A beep that can be heard by both parties sounds during recording.
note
EXAI7248.book
45 ページ
２００４年１月１２日
月曜日
午後５時１３分
Remote Operation
tip
For your convenience
remote operation cards
are provided for you to
use while away from
home (located in the
back of this manual).
You can operate your answering system from a remote location (when you are away from
home, or from another room using a handset). Use this function to check for recorded
messages, to play or delete message. When using any touch-tone telephone, you can even
record a new greeting message.
Remote Access away from Home
You can operate your answering system from a remote location using any touch-tone
telephone.
1) Call your telephone number.
note
3) The answering system announces the current time and the number of messages stored in
memory. Then you hear "To play incoming messages, press zero two.
For help, press one zero."
4) You may continue to listen to the voice prompts, or you may select a command from the
following chart:
[45] THE INTEGRATED ANSWERING DEVICE
www.uniden.com
T H E I N T E GR AT E D
ANSWERING DEVICE
Once you enter the
remote access menu,
you must enter a
command within 15
seconds, or the
answering system
automatically hangs up
and returns to standby.
2) During the greeting message, press 0 and enter your PIN code (see page 33).
EXAI7248.book
46 ページ
２００４年１月１２日
Command
0 then 1
0 then 2
0 then 3
0 then 4
0 then 5
Function
Repeat a Message
Play Incoming Messages
Skip a Message
Delete a Message
Stop Operation
月曜日
午後５時１３分
Command
0 then 6
0 then 7
0 then 8
0 then 9
1 then 0
Function
Answering System On
Memo Record/Stop*
Greeting Message Record/Stop*
Answering System Off
Voice Prompts
*For Memo Record and Greeting Message Record function, the first time you enter the
corresponding command, it starts the Recording function. If you want to stop the
recording, enter the command again.
5) After all of the voice prompts have been played, you hear intermittent beeps indicating
that the system is in the command waiting mode. You may enter another command at this
time from the chart.
6) When you are finished, hang up to exit the system. The answering system automatically
returns to standby.
THE INTEGRATED ANSWERING DEVICE [46]
T H E I N T E G R AT E D
ANSWERING DEVICE
www.uniden.com
EXAI7248.book
47 ページ
２００４年１月１２日
月曜日
午後５時１３分
Turn on the Answering System Remotely
If you have forgotten to turn on your answering system, you can turn it on remotely from
any touch-tone telephone.
1) Call your telephone number.
2) Wait ten rings until the system answers. You hear intermittent beeps.
3) Press 0 and then enter your PIN code. The answering system announces the number of
messages stored in memory. You hear "To play incoming messages, press zero two. For
help, press one zero."
4) Press 0 then 6 to turn the answering system on. You hear the outgoing message and a
confirmation tone.
5) Hang up the phone; subsequent calls will be answered by the system.
www.uniden.com
T H E I N T E GR AT E D
ANSWERING DEVICE
[47] THE INTEGRATED ANSWERING DEVICE
EXAI7248.book
48 ページ
２００４年１月１２日
月曜日
午後５時１３分
Remote Access with the Handset
You can operate your answering system from another room using a handset.
• If you press the end key before the answering system answers, the phone will return to
standby.
• If the answering system does not answer within five seconds, you hear beeps and the
phone will return to standby.
• The base's keypad is disabled during remote operation.
• If you receive a call, the remote operation is canceled.
• During the remote operation [ - - ] appears on the base.
• If you have new messages and old messages, only the new messages will be played. After
you have reviewed your new messages, you can play your old messages by pressing the
/2 key again.
1) With the phone in standby mode, press the select/remote key on the handset. R emo te
Ans wer ingM ach ine op era tio n appears on the display. The answering system announces
the current time and the number of messages stored in the memory.
2) You hear "To play incoming message, press two. For help, press zero."
You hear intermittent beeps.
3) Enter a command within 15 seconds. You may select a command from the following chart:
/1
/2
/3
/4
Function
Repeat a Message
Command
Function
Stop Operation
Play Incoming Messages
Skip a Message
/5
Answering System On
Answering System Off
Delete a Message
Voice Prompts
www.uniden.com
THE INTEGRATED ANSWERING DEVICE [48]
T H E I N T E G R AT E D
ANSWERING DEVICE
Command
EXAI7248.book
49 ページ
２００４年１月１２日
月曜日
午後５時１３分
4) After the command has finished, you hear intermittent beeps indicating that the system is
in the command waiting mode. You may enter another command at this time from the
chart above.
5) When you are finished, hang up to exit the system. The answering system automatically
returns to standby.
www.uniden.com
T H E I N T E GR AT E D
ANSWERING DEVICE
[49] THE INTEGRATED ANSWERING DEVICE
EXAI7248.book
50 ページ
２００４年１月１２日
月曜日
午後５時１３分
To protect you against misbilled calls which might result from your phone being activated by
other equipment, the cordless phone provides AutoSecureTM (which electrically locks your phone
when the handset is in the base) and Random CodeTM digital security which automatically selects
one of over 262,000 digital security codes for the handset and base.
If the handset battery pack is completely discharged or the battery pack is removed, the digital
security code will be lost. If this happens, a new security code is set automatically the next time
the battery pack is charged. In the rare situation that you suspect another cordless telephone
is using the same security code, you can change the code.
1) Remove the handset from the base unit. Press and hold the find hs key on the base.
2) While holding the find hs key, place the handset in the base unit and leave the handset in
the base for more than 3 seconds. A new random security code is set.
www.uniden.com
ADDITIONAL INFORMATION [50]
ADDITIONAL
INFORMATION
Changing the Digital Security Code
EXAI7248.book
51 ページ
２００４年１月１２日
月曜日
午後５時１３分
ADDITIONAL
INFORMATION
Note on Power Sources
Low battery alert
When the battery pack is very low and needs to be charged, the phone is
programmed to eliminate functions in order to save power. If the phone is not in
use, L ow Bat ter y appears on the LCD and none of the keys will operate.
If the phone is in use, Low Ba tte ry flashes and the handset beeps. Complete your
conversation as quickly as possible and return the handset to the base unit for
charging.
Information stored in the phone's memory will be retained for 30 minutes after
the battery pack is removed. This includes all setup information, last number dialed, speed dial memory, RocketDial
programming, and the CID list.
Even when the battery pack is not being used, it will gradually discharge over a long period of time. For optimum
performance, be sure to return the handset to the base unit after a telephone call.
Battery replacement and handling
When the operating time becomes short even after a battery is recharged, please replace the battery.
With normal usage, your battery should last about one year. Please contact your place of purchase or the Uniden
Parts Department for a replacement battery.
Warning: To avoid the risk of personal injury or property damage from fire or electrical shock, only use the Uniden
battery model and Uniden adapter model specifically designated for this product.
Power Failure
During the period that the power is off, you will not
be able to make or receive calls with the telephone.
[51] ADDITIONAL INFORMATION
•
•
•
•
Caution
Use only the specified Uniden battery pack (BT-905).
Do not remove the battery from the handset to charge it.
Never throw the battery into a fire, disassemble it, or heat it.
Do not remove or damage the battery casing.
www.uniden.com
EXAI7248.book
52 ページ
２００４年１月１２日
月曜日
午後５時１３分
To maintain a good charge, clean the charging contacts on the handset
once a month.
Dampen a cloth with plain water. Gently rub the damp cloth over the
charging contacts until all visible dirt is removed. Dry the contacts
thoroughly before returning the handset to the base.
Caution
Do not use paint thinner, benzene,
alcohol, or other chemical products.
Doing so may discolor the surface of
the telephone and damage the finish.
www.uniden.com
ADDITIONAL INFORMATION [52]
ADDITIONAL
INFORMATION
Cleaning the battery charging contacts
EXAI7248.book
53 ページ
２００４年１月１２日
月曜日
午後５時１３分
ADDITIONAL
INFORMATION
General Information
The phone complies with FCC Parts 15 and 68.
Operating temperature: -10°C to +50°C (+14°F to +122°F)
AC Adapter Information
AC Adapter part number:
AD-314
Input Voltage:
120V AC 60Hz
Output Voltage:
9V DC 350 mA
Battery Information
Battery part number:
BT-905
Capacity:
600 mAh, 3.6V
Frequency
924.516925 - 926.704425 MHz
2,405.155942 - 2,411.718441 MHz
• To avoid damage to the phone use only Uniden AD-314 and BT-905 with your phone.
• If the handset is left off of the base, the actual Talk mode duration will be reduced respective to the amount of
time the handset is off the base.
Recharge your phone on a regular basis by returning the handset to the base after each phone call.
When the operating time becomes short, even after the battery is recharged, please replace the battery.
With normal usage, the battery should last about one year.
A replacement Uniden adapter and battery may be purchased at your local Uniden dealer or by contacting the Uniden
Parts Department (800) 554-3988. Hours are from 8:00 a.m. to 5:00 p.m. Central Time, Monday through Friday. We
can also be reached on the web at www.uniden.com. Specifications, features, and availability of optional accessories
are all subject to change without prior notice.
[53] ADDITIONAL INFORMATION
www.uniden.com
EXAI7248.book
54 ページ
２００４年１月１２日
月曜日
午後５時１３分
If your phone is not performing to your expectations, please try these simple steps first.
Symptom
Suggestion
The charge in use LED won't
illuminate when the handset is
placed in the base.
• Make sure the AC adapter is plugged into the base and wall outlet.
• Make sure the handset is properly seated in the base.
• Make sure the charging contacts on the handset are clean.
The audio sounds weak and/or
scratchy.
• Move the handset and/or base away from metal objects or appliances and try again.
• Press the delete/channel key in the Talk mode to help eliminate background noise.
• Make sure that the handset is not too far from the base.
Can't make or receive calls.
• Check both ends of the telephone line cord.
• Make sure the AC adapter is plugged into the base and wall outlet.
• Disconnect the AC adapter for a few minutes. Then reconnect it.
• Change the digital security code (see page 50).
• Make sure that the handset is not too far from the base.
• Check the dialing mode used by your telephone company.
www.uniden.com
ADDITIONAL INFORMATION [54]
ADDITIONAL
INFORMATION
Troubleshooting
EXAI7248.book
55 ページ
２００４年１月１２日
月曜日
ADDITIONAL
INFORMATION
Symptom
午後５時１３分
Suggestion
The handset doesn't ring or
receive a page.
• The battery pack may be weak. Charge the battery for 15-20 hours.
• The handset may be too far from the base unit.
• Place the base unit away from appliances or metal objects.
• Change the digital security code (see page 50).
• Check the battery pack to ensure there is a secure connection.
• Make sure ringer volume isn't set to turned "off."
Severe noise interference.
• Keep the handset away from microwave ovens, computers, remote control toys, wireless
microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical
appliances.
• Move the base to another location or turn off the source of interference.
The Caller ID does not display.
• The call was answered before the second ring.
• The call was placed through a switchboard.
• Charge the handset.
• Your Caller ID service may not be active; contact your local telephone service provider.
The answering system does not
work.
• Make sure the AC adapter is plugged into wall outlet.
• Make sure the answering system is turned on.
The answering system does not
record any messages.
• Set the record time to either the one minute or four minute option.
• The memory may be full. Delete some or all of the saved messages.
Messages are incomplete.
• The incoming messages may be too long. Remind callers to leave a brief message.
• The memory may be full. Delete some or all of the saved messages.
[55] ADDITIONAL INFORMATION
www.uniden.com
EXAI7248.book
56 ページ
２００４年１月１２日
午後５時１３分
Suggestion
After a power failure, the
outgoing message is deleted.
• Record your personal outgoing message again. The default message should remain.
No sound on the base unit
speaker during call monitoring
or message playback.
• Adjust the speaker volume on the base unit.
ADDITIONAL
INFORMATION
Symptom
月曜日
Cannot access remote call-in
• Make sure you're using the correct PIN code.
features from another touchtone • Make sure that the touch-tone phone you're using can transmit the tone for at least two
phone.
seconds. If it cannot, you may have to use another phone to access your messages.
If you still have a problem.
ADDITIONAL INFORMATION [56]
ADDITIONAL INFORMATION
www.uniden.com
• Call our customer hotline at 1-800-297-1023.
EXAI7248.book
57 ページ
２００４年１月１２日
月曜日
午後５時１３分
Moisture and liquid can damage your cordless phone. In case of accidental submersion, please follow these steps.
Case
Action
If the handset or base is exposed to
moisture or liquid, but only affects the
exterior plastic housing.
Wipe off the liquid, and use as normal.
If moisture or liquid has entered the
plastic housing (i.e., liquid can be heard
in the phone or liquid has entered the
handset battery compartment or vent
openings on the base).
Handset:
1.Remove the battery cover and leave it off for ventilation
2.Remove the battery pack by disconnecting
3.Leave the battery cover off and the battery pack disconnected for at least 3 days
4.Once the handset is completely dry, reconnect the battery pack and the battery cover.
5.Recharge the handset’s battery pack for 20 hours before using again.
Base:
1.Disconnect the AC adapter from the base unit, cutting off electrical power.
2.Disconnect the telephone cord from the base unit.
3.Let dry for at least 3 days.
IMPORTANT: You must unplug the telephone line while recharging the battery pack to
avoid charge interruption.
CAUTION:
DO NOT use a microwave oven to speed up the drying process. This will cause permanent
damage to the handset, base and the microwave oven.
After following these steps, if your cordless telephone does not work, please send to:
Uniden America Corporation
Parts and Service Division
4700 Amon Carter Blvd.
Ft. Worth, TX 76155
1-800-554-3988, Monday through Friday
8 a.m. to 5 p.m. CST
[57] ADDITIONAL INFORMATION
www.uniden.com
ADDITIONAL
INFORMATION
Liquid Damage
EXAI7248.book
58 ページ
２００４年１月１２日
Before you read anything else, please observe the following:
Warning!
Uniden America Corporation DOES NOT represent this unit to be
waterproof. To reduce the risk of fire, electrical shock, or damage to the
unit, DO NOT expose this unit to rain or moisture.
Rechargeable Nickel-Metal-Hydride Battery Warning
•This equipment contains a rechargeable nickel-cadmium battery.
•Cadmium is a chemical known to the State of California to cause cancer.
•The rechargeable nickel-cadmium battery contained in this equipment
may explode if disposed of in a fire.
•Do not short-circuit the battery.
•Do not charge the rechargeable nickel-cadmium battery used in this
equipment in any charger other than the one designed to charge this
battery as specified in the owner’s manual.
Using another charger may damage the battery or cause the battery to
explode.
Rechargeable Nickel-Cadmium
Batteries Must Be Recycled or
Disposed of Properly
•Uniden voluntarily participates in an RBRC® industry program to collect
and recycle nickel-cadmium batteries at the end of their useful life,
when taken out of service within the United States.
The RBRC® program provides a convenient alternative to placing used
nickel-cadmium batteries into the trash or municipal waste stream,
which is illegal in some areas.
•Through the RBRC® program, Uniden makes it easy for you to drop off
the used battery at local retailers of replacement nickel-cadmium
batteries. You may also contact your local recycling center for
information on where to return the used battery. Please call 1-800-8BATTERY for information on Ni-Cd battery recycling in your area.
Uniden's involvement in this program is part of its commitment to
protecting our environment and conserving natural resources.
•RBRC® is a registered trademark of the Rechargeable Battery Recycling
Corporation.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Uniden works to reduce lead content in our PVC coated cords in our
product and accessories.
WARNING: The cords on this products and/or accessories contain lead, a
chemical known to the State of California to cause birth defects or other
reproductive harm. Wash hands after handling.
www.uniden.com
午後５時１３分
Important Safety Instructions
When using your telephone equipment, these basic safety precautions
should always be followed to reduce the risk of fire, electrical shock, and
injury to persons:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. Unplug this product from the wall outlet before cleaning. Use a dry
cloth for cleaning without liquid or aerosol cleaners.
4. Do not use this product near water; for example, near a bathtub, wash
bowl, kitchen sink or laundry tub, in a wet basement, or near a
swimming pool.
5. Do not place this product on an unstable cart, stand, or table.
The telephone may fall, causing serious damage to the unit.
6. Slots and openings in the cabinet and the back or bottom are
provided for ventilation. To protect the product from overheating,
these openings must not be blocked or covered. This product should
never be placed near or over a radiator or heat register. This product
should not be placed in a built-in installation unless proper
ventilation is provided.
7. This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your dealer or local power company.
8. Do not allow anything to rest on the power cord. Do not locate this
product where the cord will be damaged by persons walking on it.
9. Do not overload wall outlets and extension cords, as this can result in
the risk of fire or electrical shock.
10. Never push objects of any kind into this product through cabinet
slots, as they may touch dangerous voltage points or short out parts
that could result in a risk of fire or electric shock. Never spill liquid of
any kind on the product.
11. To reduce the risk of electric shock, do not disassemble this product.
Take it to qualified service personnel when service or repair work is
required. Opening or removing covers may expose you to dangerous
voltages or other risks. Incorrect reassembly can cause electric shock
when the appliance is subsequently used.
12. Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
A. When the power supply cord is damaged or frayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or water.
D. If the product does not operate normally when following the
operating instructions. (Adjust only those controls that are
covered by the operating instructions. Improper adjustment of
other controls may result in damage and will often require
extensive repair work by a qualified technician.)
E. If the product has been dropped or the cabinet has been damaged.
F. If the product exhibits a distinct change in performance.
13. Do not use the telephone to report a gas leak in the vicinity of the
leak.
1. Use only the Uniden battery pack specified in the owner’s manual.
2. Do not dispose of the battery pack in a fire. The cell may explode.
Check the nickel-cadmium battery disposal package insert for disposal
instructions.
3. Do not open or mutilate the battery pack. Released electrolyte is
corrosive and may cause damage to the eyes or skin. It may be toxic
if swallowed.
4. Exercise care in handling the battery in order not to short the battery
with conducting materials such as rings, bracelets, and keys. The
battery or conductor may overheat and cause burns.
5. Charge the battery pack provided with or identified for use with this
product only in accordance with the instructions and limitations
specified in the owner’s manual provided for this product.
6. Observe proper polarity orientation between the battery pack and
battery charger.
SAVE THESE INSTRUCTIONS!
Important Electrical Considerations
Unplug all electrical appliances when you know an electrical storm is
approaching. Lightning can pass through your household wiring and
damage any device connected to it. This phone is no exception.
The FCC Wants You To Know
Changes or modifications to this product not expressly approved by
Uniden, or operation of this product in any way other than as detailed by
the owner’s manual, could void your authority to operate this product.
Your telephone compiles with Part 68 of FCC Rules. You must, upon
request, provide the FCC registration number and the REN to your
telephone company. Both numbers are on the base unit.
You must not connect your phone to:
• coin-operated systems
• most electronic key telephone systems
This device complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation. Privacy of
communications may not be ensured when using this phone.
Note:
Range
Your new phone is designed to achieve the maximum possible range by
transmitting and receiving according to the highest specifications set
forth by the FCC. We have rated this phone to operate at a maximum
distance with the qualification that the range depends upon the
environment in which the telephone is used. Many factors limit range,
and it would be impossible to include all the variables in our rating. The
Maximum Range rating of this phone is meant to be used as a means of
comparison against other range claims.
Additional Battery Safety Precautions
Caution!
To reduce the risk of fire or injury to persons by the battery,
read and follow these instructions:
ADDITIONAL INFORMATION [58]
ADDITIONAL
INFORMATION
Precautions!
月曜日
EXAI7248.book
59 ページ
２００４年１月１２日
The FCC has granted the telephone company the right to disconnect
service in the event that your phone causes problems on the telephone
line. Also, the telephone company may make changes in facilities and
services which may affect the operation of your unit. However, your
telephone company must give adequate notice in writing prior to such
actions to allow you time for making necessary arrangements to continue
uninterrupted service.
If you are having trouble with your telephone service, you must first
disconnect your phone to determine if it is the cause of your problem. If
you determine that it is the cause, you must leave it disconnected until
the trouble has been corrected.
Radio Interference
Radio interference may occasionally cause buzzing and humming in your
cordless handset, or clicking noises in the base. This interference is
caused by external sources such as TV, refrigerator, vacuum cleaner,
fluorescent lighting, or electrical storm. Your unit is NOT DEFECTIVE.
If these noises continue and are too distracting, please check around
your home to see what appliances may be causing the problem.
In addition, we recommend that the base not be plugged into a circuit
that also powers a major appliance because of the potential for
interference. Be certain that antenna on the unit is fully extended.
In the unlikely event that you consistently hear other voices or
distracting transmissions on your phone, you may be receiving radio
signals from another cordless telephone or other source of interference.
If you cannot eliminate this type of interference, you need to change to
a different channel.
Finally, it should be noted that some cordless telephones operate at
frequencies that may cause interference to nearby TVs and VCRs.
To minimize or prevent such interference, the base of the cordless
telephone should not be placed near or on top of a TV or VCR.
If interference is experienced, moving the cordless telephone farther
away from the TV or VCR will often reduce or eliminate the interference.
More than One Cordless Telephone
If you want to use more than one cordless telephone in your home, they
must operate on different channels. Press the delete/channel key to
select a channel that provides the clearest communication.
Cordless Telephone Privacy
Cordless telephones are radio devices. Communications between the
handset and base of your cordless telephone are accomplished by means
of radio waves which are broadcast over the open airways. Because of the
inherent physical properties of radio waves, your communications can be
received by radio receiving devices other than your own cordless
telephone unit. Consequently, any communications using your cordless
telephone may not be private.
午後５時１３分
Installation Considerations
One Year Limited Warranty
Selecting a Location
Important: Evidence of original purchase is required for warranty service.
WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”)
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original
retail owner, this Uniden Product to be free from defects in materials and
craftsmanship with only the limitations or exclusions set out below.
Before choosing a location for your new phone, there are some important
guidelines you should consider:
• The location should be close to both a phone jack and continuous
power outlet. (A continuous power outlet is an AC outlet which does
not have a switch to interrupt its power.)
• Keep the base and handset away from sources of electrical noise such
as motors or fluorescent lighting.
• The base can be placed on a desk or tabletop or mounted on a standard
telephone wall plate.
• You should charge your new phone for 15-20 hours before completing
the installation or using the handset.
Telephone Line Outlets
There are two types of phone outlets:
Modular Jack
Most phone equipment available now uses modular jacks. Phone cords are
fitted with a molded plastic connector which plugs into this type of jack.
If you do not have modular phone jacks, contact your local telephone
company for information about their installation.
Hardwired Jack
Some equipment is wired directly to a phone jack, and these types of
installations require a modular jack converter. This type of installation is
not difficult; however, you should contact your Uniden telephone dealer
or a telephone supply store for advice about the proper adapter or
converter for your particular situation.
Connecting the Telephone Cords
Consider these safety guidelines before connecting the telephone cords:
Caution!
• Never install telephone wiring during a lightning storm.
• Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected.
• Use caution when installing or modifying telephone lines.
Applying Power to the Base
This phone requires an AC outlet, without a switch to interrupt power,
and the included AC adapter. To relieve strain on the DC plug when the
phone is placed on a desk or table, wrap the power cord around the strain
relief notch on the back of the base.
NOTE:
Place the power cord so that it does not create a trip hazard, or
where it could become chafed and create a fire or other
electrical hazards.
WARRANTY DURATION: This warranty to the original user shall terminate
and be of no further effect 12 months after the date of original retail
sale. The warranty is invalid if the Product is (A)
damaged or not maintained as reasonable or necessary, (B) modified,
altered, or used as part of any conversion kits, subassemblies, or any
configurations not sold by Uniden, (C) improperly installed,
(D) serviced or repaired by someone other than an authorized Uniden
service center for a defect or malfunction covered by this warranty, (E)
used in any conjunction with equipment or parts or as part of any system
not manufactured by Uniden, or (F) installed or programmed by anyone
other than as detailed by the owner’s manual for this product.
STATEMENT OF REMEDY: In the event that the product does not conform
to this warranty at any time while this warranty is in effect, warrantor
will either, at its option, repair or replace the defective unit and return it
to you without charge for parts, service, or any other cost (except
shipping and handling) incurred by warrantor or its representatives in
connection with the performance of this warranty. Warrantor, at its
option, may replace the unit with a new or refurbished unit. THE LIMITED
WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY
PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL
OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS,
IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT
LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR
PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or
limitation of incidental or consequential damages so the above limitation
or exclusion may not apply to you.
LEGAL REMEDIES: This warranty gives you specific legal rights, and you
may also have other rights which vary from state to state. This warranty
is void outside the United States of America and Canada.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after
following the instructions in the owner’s manual you are certain that the
Product is defective, pack the Product carefully (preferably in its original
packaging). The Product should include all parts and accessories
originally packaged with the Product. Include evidence of original
purchase and a note describing the defect that has caused you to return
it. The Product should be shipped freight prepaid, by traceable means, to
warrantor at:
Uniden America Corporation
Parts and Service Division
4700 Amon Carter Blvd. Fort Worth, TX 76155
(800) 297-1023, 8 a.m. to 5 p.m. CST, Monday through Friday
or visit our website at www.uniden.com
[59] ADDITIONAL INFORMATION
www.uniden.com
ADDITIONAL
INFORMATION
Telephone Line Problems
月曜日
EXAI7248.book
60 ページ
２００４年１月１２日
月曜日
午後５時１３分
TERMINAL EQUIPMENT
NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is
confirmed by the registration number. The abbreviation, IC, before the registration number signifies that
registration was performed based on a Declaration of Conformity indicating that Industry Canada technical
specifications were met. It does not imply that Industry Canada approved the equipment.
NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipment itself. The
REN assigned to each terminal equipment provides an indication of the maximum number of terminals
allowed to be connected to a telephone interface. The termination on an interface may consist of any
combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of
all the devices does not exceed five.
RADIO EQUIPMENT
The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were
met.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired
operation of the device. “Privacy of communications may not be ensured when using this telephone”.
www.uniden.com
ADDITIONAL INFORMATION [60]
ADDITIONAL
INFORMATION
I.C. Notice
EXAI7248.book
61 ページ
２００４年１月１２日
AC adapter information . . . .
Announce only feature . . . .
Answering system
Deleting a message . . . . .
Playing a message . . . . .
Recording a conversation .
Remote access . . . . . . . .
Repeating a message . . . .
Skipping a message . . . . .
Turning on/off . . . . . . . .
Basic setup . . . . . . . . . . .
Battery pack
Information . . . . . . . . . .
Installing . . . . . . . . . . .
Preparing and charging . .
Replacement and handling
Beltclip installation . . . . . .
Call waiting . . . . . . . . . . .
Caller ID service . . . . . . . .
Call waiting . . . . . . . . . .
Deleting . . . . . . . . . . . .
Making a call . . . . . . . . .
Viewing . . . . . . . . . . . .
. . . 53
. . . 35
43
40
44
45
41
42
30
. . . 11
53
.6
.6
51
.9
18
25
18
27
28
26
午後５時１３分
Channel . . . . . . . . . . . . . . . . . 17
Charging the battery pack . . . . . .7
Cleaning contacts . . . . . . . . . . . 52
Clock . . . . . . . . . . . . . . . . . . . 32
Connect the base unit . . . . . . . . .7
Controls and functions . . . . . . . . .3
Dial mode . . . . . . . . . . . . . . . . 13
Digital security code . . . . . . . . . 50
E, F, G, H, I, J, K, L
Earpiece volume . . . . . . . . . . . . 16
Find Handset . . . . . . . . . . . . . . 18
General information . . . . . . . . . 53
Greeting . . . . . . . . . . . . . . . . . 37
Headset installation . . . . . . . . . 10
I.C. Notice . . . . . . . . . . . . . . . 60
Installing the phone . . . . . . . . . .5
Interference . . . . . . . . . . . . . . 59
Liquid damage . . . . . . . . . . . . . 57
M, N, O, P, Q
Making a call . . . . . . . . . . . . . . 15
Menu mode . . . . . . . . . . . . . . . 31
Message alert . . . . . . . . . . . . . . 36
Outgoing message . . . . . . . . . . . 37
Personal security code (PIN code) 33
Precautions . . . . . . . . . . . . . . . 58
Receiving a call . . . . . . . . . . . . 15
[61] ADDITIONAL INFORMATION
Record time . . . . . . . . . . . . . . 35
Redial . . . . . . . . . . . . . . . . . . 16
Remote access . . . . . . . . . . . . 45
Ring time . . . . . . . . . . . . . . . . 34
Ringer tone . . . . . . . . . . . . . . 14
Ringer volume (Base) . . . . . . . . 39
RocketDial . . . . . . . . . . . . . . . 19
Speed dial memory
Making calls from speed dial
memory . . . . . . . . . . . . . . 24
Storing names and numbers in
speed dial memory . . . . . . . 20
T, U
Technical information . . . . . . . . 53
Tone dialing switch-over . . . . . . 17
Traveling out-of-range . . . . . . . 17
Troubleshooting . . . . . . . . . . . 54
V, W, X, Y, Z
Voice Memo . . . . . . . . . . . . . . 44
Volume control
Base . . . . . . . . . . . . . . . . . . 39
Handset . . . . . . . . . . . . 14, 16
Wall mounting . . . . . . . . . . . . . . 8
Warranty . . . . . . . . . . . . . . . . 59
www.uniden.com
ADDITIONAL
INFORMATION
Index
月曜日
EXAI7248.book
62 ページ
２００４年１月１２日
月曜日
午後５時１３分
Memo
www.uniden.com
[62]
EXAI7248.book
63 ページ
２００４年１月１２日
月曜日
午後５時１３分
Memo
[63]
www.uniden.com
EXAI7248.book
64 ページ
月曜日
２００４年１月１２日
午後５時１３分
Remote Operation Card
C U T
C U T
REMOTE OPERATION CARD
MEMORY LOCATION MEMO
Remote access away from home
Turn on the answering system remotely
1. Call your phone number from a
touch-tone phone.
2. During the outgoing message,
press 0 and enter your PIN
code. The answering system
announces the number of
messages stored in memory
and the voice prompts. The
phone stands by for you to
enter a command.
3. To quit, hang up the phone.
1. Call your phone and let it ring
10 times until it answers.
2. Press 0 and enter your PIN
code.
3. Press 0 then 5 to stop
the announcement.
4. Press 0 then 6 to turn the
answering system on.
Memory
Location
Name
Phone Number
1*
C U T
C U T
REMOTE OPERATION CARD
MEMORY LOCATION MEMO
Remote access away from home
Turn on the answering system remotely
1. Call your phone number from a
touch-tone phone.
2. During the outgoing message,
press 0 and enter your PIN
code. The answering system
announces the number of
messages stored in memory
and the voice prompts. The
phone stands by for you to
enter a command.
3. To quit, hang up the phone.
1. Call your phone and let it ring
10 times until it answers.
2. Press 0 and enter your PIN
code.
3. Press 0 then 5 to stop
the announcement.
4. Press 0 then 6 to turn the
answering system on.
Memory
Location
1*
Name
Phone Number
EXAI7248.book
65 ページ
２００４年１月１２日
月曜日
午後５時１３分
Remote Operation Card
C U T
C U T
MEMORY LOCATION MEMO
Memory
Location
Name
Phone Number
10
Task
C U T
10
Name
C U T
MEMORY LOCATION MEMO
Memory
Location
Key
Repeat a Message
Play Incoming Messages
Skip a Message
Delete a Message
Stop Operation
Answering System On
Memo Record/Stop
Greeting Message Record/Stop
Answer System Off
Voice Prompts
Phone Number
Task
Repeat a Message
Play Incoming Messages
Skip a Message
Delete a Message
Stop Operation
Answering System On
Memo Record/Stop
Greeting Message Record/Stop
Answer System Off
Voice Prompts
Key
EXAI7248.book
66 ページ
２００４年１月１２日
月曜日
午後５時１３分
At Uniden, we'll take care of you!
If you need any assistance with this product, please call our Customer Hotline at
or visit our web site at www.uniden.com
1-800-297-1023
PLEASE DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE.
Our Uniden representatives will be happy to help you with any matters regarding
the operation of this unit, available accessories, or any other related matters.
Thank you for purchasing a Uniden product.
Hours: M-F 8:00 AM to 5:00 PM CST.
Accessibility
For information on the accessibility features of this product, please call
1-800-874-9314 (V/TTY)
May be covered under one or more of the following U.S. patents:
4,523,058 4,595,795 4,797,916 5,381,460 5,426,690 5,434,905
5,491,745 5,493,605 5,533,010 5,574,727 5,581,598 5,650,790
5,660,269 5,661,780 5,663,981 5,671,248 5,696,471 5,717,312
5,732,355 5,754,407 5,758,289 5,768,345 5,787,356 5,794,152
5,801,466 5,825,161 5,864,619 5,893,034 5,912,968 5,915,227
5,929,598 5,930,720 5,960,358 5,987,330 6,044,281 6,070,082
6,125,277 6,253,088 6,314,278 6,418,209
R
IE
S,
E CO
SO IN
E NL EN
CC
A O O NI
.U
FO
R E G I S T E R O N L I N E T O D AY !
T H A N K Y O U F O R B U Y I N G A U N I D E N P R O D U C T.
©2004 Uniden America Corporation, Fort Worth, Texas. Contains additional foreign articles. Custom manufactured in China.
UPZZ01035BZ

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2004:01:12 08:20:42Z
Modify Date                     : 2004:01:13 17:10:53+09:00
Page Count                      : 68
Creation Date                   : 2004:01:12 08:20:42Z
Mod Date                        : 2004:01:13 17:10:53+09:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : ex3
Metadata Date                   : 2004:01:13 17:10:53+09:00
Creator                         : ex3
Title                           : EXAI7248.book
Has XFA                         : No

EXIF Metadata provided by EXIF.tools

Uniden America UP033R CORDLESS TELEPHONE REMOTE (HANDSET) User Manual EXAI7248

Uniden America Corporation CORDLESS TELEPHONE REMOTE (HANDSET) EXAI7248

MANUAL

FCC ID Filing: AMWUP033R

Navigation menu

Namespaces

Views

Navigation