Uniden America UP094R CORDLESS TELEPHONE - REMOTE UNIT User Manual USERS MANUAL

Uniden America Corporation CORDLESS TELEPHONE - REMOTE UNIT USERS MANUAL

UserManual.wiki >

Uniden America >

UP094R User Manual HTML Version

USERS MANUAL

UP094BH.indd A

9/28/2006 10:46:26 AM

Introduction

Uniden 2.4GHz cordless phones are designed and engineered to exacting standards for

reliability, long life, and outstanding performance.

NOTE: Illustrations in this manual are used for explanation purposes. Some

illustrations in this manual may differ from the actual unit. The color of your

cordless phone may vary.

Features

• 2.4 GHz Extended

Range Technology

• AutoTalk™

• Pulse/Tone Dialing

• 20 Channel Autoscan

• Last Number Redial

• 10-Number Memory

Dialing

• AutoStandby™

• Earpiece Volume

Control

• Hearing Aid

Compatible

• Find Handset Locator

The cordless phone features AutoTalk™ and AutoStandby™.AutoTalk™ allows you to

answer a call by just removing the handset from the base so you don't have to waste time

pushing buttons. AutoStandby™ allows you to hang up by simply returning the handset

to the base.

The UltraClear Plus™ true compander circuitry virtually eliminates background noise.

This innovative technology, together with 20 different channels, provides you with the best

possible reception during all your conversations.

To protect you against misbilled calls which could result from your phone being activated

by other equipment, the cordless phone has Random Code™ digital security which

automatically selects one of approx. 262,000 digital security codes for the handset and

base. Also, the AutoSecure™ feature electronically locks your phone when the handset

is charging in the base.

If you have any trouble with your phone, call our Customer Hotline at 1- 800-297-

1023, Mon-Fri 7 am to 7 pm, Sat/Sun 9 am to 5 pm, CST. (Phone support is closed on

holidays.)

For more information on Uniden products and accessories, be sure to visit our web site:

www.uniden.com

Uniden® is a registered trademark of Uniden America Corporation.

AutoTalk,AutoStandby,UltraClear Plus,Random Code and AutoSecure are trademarks

of Uniden America Corporation.

Controls and Functions

1. Handset antenna

2. Handset earpiece

3. talk/batt low LED - indicates when

phone is in use or the battery is low

4. [volume/] - sets the ringer tone and

earpiece volume

5. [ﬂ ash] - accesses call waiting (if

available)

6. [/tone] – temporarily switches to tone

dialing when in pulse dial mode

7. [redial/pause] - redials the last number

/ adds a 2-second pause in a memory

dialing sequence.

8. [memory] - enters or recalls numbers

in stored in memory

9. Handset microphone and ringer speaker

10.[talk] - answers or places calls

11. [end] - hangs up a phone call / mutes

the ringing tone temporarily

12. [channel] - selects another channel for

clearer reception

13. Handset charging contacts

14. Base charging contacts

15. in use/LED

16. [ﬁ nd] - locates the handset

UP094BH.indd 1

9/28/2006 10:46:26 AM

Included with Your Phone

• Base Unit • Handset • AC Adapter • Rechargeable Battery •Telephone Cord

• This owner’s manual

Replacement adapters, batteries and other parts may be purchased by calling the

Customer Hotline at 1-800-297-1023, Mon-Fri 7 am to 7 pm, Sat/Sun 9 am to 5 pm, CST.

(Phone support is closed on holidays.)

Terminology

Throughout this manual, terms such as Standby and Talk are used. Below is the

terminology explanation.

•Talk - The handset is off the base and [talk] has been pressed, enabling a dial tone.

•Standby - The handset may be sitting on the base charging or out of the base cradle,

but is NOT in use. [talk] has not been pressed and there is no dial tone.

Accessibility

Uniden provides a customer service hotline for accessibility questions. If you have a

disability and need customer service assistance or if you have any questions about how

Uniden's products accommodate persons with disabilities, please call the accessibility

voice/TTY line:

1-800-874-9314

A representative is available to talk to you M-F, 8:00 am to 5:00 pm, CST. After hours, you

can leave a message, and we will call you back. Information is also available on our web

site, www.uniden.com, under the "Accessibility" link.

Installing the Phone

Do the following steps:

A. Choose the best location

B. Install the rechargeable battery pack into the handset

C. Connect the base unit and charge the handset

D. Mount the base unit on a wall

E. Choose the dialing mode

A. Choose the best location

When choosing a location for your new phone, here are some important guidelines you

should consider:

Avoid noise sources such as a window

by a street with heavy trafﬁ c

Avoid microwave ovens

Avoid excessive moisture,

extremely low temperatures,

dust, mechanical vibration,

or shock

Avoid personal computers

Avoid other cordless telephones

Avoid heat sources, such as

radiators, air ducts, and sunlight

Avoid television sets and

other electronic equipment

Choose a central location

• The location should be close to both a phone jack and a continuous power outlet (one

which is not connected to a switch).

• The base and handset should be kept away from sources of electrical noise such as

motors and ﬂ uorescent lighting.

• The base can be placed on a desk, tabletop, or mounted on a standard wall plate. For

better reception, place the base as high as possible.

• The base should be placed in an open area for optimum range and reception.

UP094BH.indd 2

9/28/2006 10:46:26 AM

B. Install the rechargeable battery pack into the handset

The handset is powered by a rechargeable battery pack. The

battery recharges automatically when the handset is placed in

the base unit.

NOTE: If your home has specially wired alarm

equipment connected to the telephone line, be sure

that installing the system does not disable your

alarm equipment. If you have questions about what

will disable your alarm equipment, contact your

telephone company or a qualiﬁ ed installer.

1) Press down on the handset battery case cover (use the

ﬁ nger indention for a better grip) and slide the cover

downward to remove.

2) Plug the battery pack connector (red & black wires) into

the jack inside the battery compartment (the connector

notches ﬁ t into the grooves of the jack only one way).

Match the wire colors to the polarity label in the battery

compartment, connect the battery and listen for a click to

insure connection.

3) Fit the battery pack into the battery compartment.

4) Before replacing the battery cover, pull on the battery

wires slightly. If the connection is secure, the jack will stay

in place. Then place the battery case cover back on the

handset by sliding it upwards until it clicks into place.

NOTE: For optimum performance, use only the

Uniden Battery (BT- 1007) supplied with your phone.

C. Connect the base unit and charge the handset

1) Connect the AC adapter to the DC IN 9V jack

and a standard 120V AC wall outlet.

2) Set the base unit on a desk or tabletop, and

place the handset in the base unit with the

keypad facing forward.

3) Make sure the in use/LED illuminates. If the

LED does not illuminate, check to see that

the AC adapter is plugged in and the handset

makes good contact with the base charging

contacts.

NOTICE: Do not place the power cord

where it creates a trip hazard or where

it could become chafed and create a ﬁ re

or electrical hazard.

NOTE:

• Use only the supplied AD-0001 AC

adapter. Do not use any other AC

adapter.

• Connect the AC adapter to a

continuous power supply.

• Place the base unit close to the AC

outlet to avoid long extension cords.

4) Charge your handset at least 15-20 hours

before plugging the phone line.

5) Once the handset battery pack is

fully charged, connect the telephone

line cord to the TEL LINE jack and

a telephone outlet. If your telephone

outlet isn’t modular, contact your

telephone company for assistance.

Route the cord.

Modula

UP094BH.indd 3

9/28/2006 10:46:27 AM

Talk and Standby Times

With average use, your handset battery provides approximately 6 hours of talk time and

approximately 7 days of standby time. When your handset is not being used and is left

off of their charging cradle, the battery will gradually discharge. You can achieve optimum

battery life and performance by returning the handset to the charging cradle after each

use. If the handset is left off of the charging cradle, the actual talk time duration will be

reduced respective to the amount of time the handset is off of the charging cradle.

D. Mount the base unit on a wall

Standard wall plate mounting

This phone can be mounted on any standard wall

plate.

1) Plug the AC adapter to the DC IN 9V jack.

2) Plug the AC adapter into a standard 120V AC wall

outlet.

3) Plug the telephone line cord into the TEL LINE

jack.

4) Route the telephone line cord through the groove

as shown.

5) Plug the telephone line cord into the telephone

outlet.

6) Align the mounting slots on the base with the

mounting posts on the wall. Then push in and

down until the phone is ﬁ rmly seated.

Direct wall mounting

If you don’t have a standard wall plate, you can mount your phone directly to the wall.

Before doing this, consider the following:

• Avoid electrical cables, pipes, or other items behind the mounting

location that could cause a hazard when inserting screws into the

wall.

• Try to mount your phone within 5 feet of a working phone jack to

avoid excessive cord lengths.

• Make sure the wall material is capable of supporting the weight of

the base and handset.

• Use #10 screws (minimum length of 1-3/8 inches) with anchoring

devices suitable for the wall material where the base unit will be

placed.

1) Insert two mounting screws into the wall, (with their appropriate

anchoring device), 3-15/16 inches apart. Allow about 1/8 of an

inch between the wall and screw heads for mounting the phone.

2) Refer to steps 1 through 5 above to mount the telephone.

E. Choose the dialing mode

Most phone systems use tone dialing. However, some phone systems (such as in rural

areas) still use pulse dialing. Your Uniden phone supports both tone and pulse dialing.

The default setting is tone dialing. If your phone system uses pulse dialing, follow the

steps below to change the dialing mode:

1) In standby, press and hold [ﬂ ash] until you hear a conﬁ rmation tone.

2) Press [#] to set your phone for pulse dialing. You will hear a conﬁ rmation tone.

If you need to reset your phone to tone dialing, press and hold [ﬂ ash] until you hear the

conﬁ rmation tone. Then press [/tone] to restore the tone setting.

NOTE:

• Make sure your battery pack is fully charged before choosing the dial

mode.

• If you are not sure of your dialing system, make a trial call. If the call

connects, leave the setting at tone dialing. Otherwise, set for pulse dialing.

UP094BH.indd 4

9/28/2006 10:46:27 AM

Using Your Phone

Making and Receiving Calls

Making a call

1) Pick up the handset from the base.

2) Press [talk]. The talk/batt low LED ﬂ ashes and turns on.

3) Listen for the dial tone.

4) Dial the number.

Receiving a call

If the handset is in the base, simply remove the handset from the base. AutoTalk will

automatically answer the call.

If the handset is off the base, press [talk], any number key, [/tone], or [#].

Hanging up

Press [end] or return the handset to the base.

Redialing the last dialed number

1) Pick up the handset from the base.

2) Press [talk]. The talk/batt low LED ﬂ ashes and turns on.

3) Listen for the dial tone.

4) Press [redial/pause].

Flash and Call Waiting

If you subscribe to Call Waiting service through your telephone

company and a call waiting tone sounds while you are on a call,

press [ﬂ ash] to accept the waiting call. There is a short pause, and

you will hear the new caller. To return to the original caller, press

[ﬂ ash] again.

Adjusting the Ringer Tone

When the phone is in standby, press [volume/] to switch between the two ringer tones.

The last ringer tone heard will be selected as the phone’s ring tone setting.

Temporarily Mute Ringer

If the handset is off the base, simply press [end] to temporarily mute the incoming ring for

that particular call. The ringer will sound with the next incoming call.

Adjusting the Earpiece volume

The handset earpiece volume settings can only be adjusted during a call. To adjust, press

[volume/] to scroll through the three volume levels and select the one that works best

for you. When you hang up, the phone keeps the volume setting.

Traveling Out-of-Range

During a call, as you begin to move your handset too far from your base unit, noise

increases.

If you pass the range limits of the base, your call will terminate within one minute.

Selecting a Different Channel

If you encounter interference while using your phone, you can manually change the

phone’s channel for clear operation. During a call, press [channel] to change the

channel. The talk/batt low LED ﬂ ashes, indicating the phone is changing to another

channel. For more information on interference, refer to “Radio Interference” on page 10.

UP094BH.indd 5

9/28/2006 10:46:27 AM

Find Handset

To locate the handset, press [ﬁ nd] on the base. The handset will beep for 60 seconds.

The beeping will stop when any handset key is pressed, when it is returned to the base,

or when [ﬁ nd] is pressed. The handset will also stop beeping automatically when an

incoming call is received.

Low Battery Alert

When the battery pack is very low and needs to be charged, the phone is programmed

to eliminate functions in order to save power. If the phone is not in use, the talk/batt low

LED ﬂ ashes when the battery pack is low.

If the phone is in use, the talk/batt low LED ﬂ ashes and the handset beeps. Complete

your conversation as quickly as possible and return the handset to the base for charging.

NOTE:

• Even when the battery pack is not being used, it will gradually discharge

over a long period of time. For optimum performance, be sure to return the

handset to the base unit after each telephone call.

• Dial mode setting, last number dialed and numbers stored in memory

locations are retained for up to one minute while you replace the battery

pack.

Cleaning the battery charging contacts

To maintain a good charge, clean the charging contacts on

the handset once a month.

To clean, dampen a cloth with plain water and gently rub

the cloth over the charging contacts until all visible dirt is

removed. Dry the contacts thoroughly before returning the

handset to the base.

Caution: Do not use paint thinner, benzene,

alcohol, or other chemical products. Doing so may

discolor the surface of the telephone and damage

the ﬁ nish.

Tone Dialing Switch-over

If your telephone company requires pulse dialing, you can

temporarily switch over to tone dialing after the call connects. This

feature is useful when you need tone dialing to use any automated

menu systems, such as telephone bank tellers, telephone

prescription reﬁ lls, customer support menus, etc.

If your phone is set to pulse dialing mode, make your call normally.

Once your call connects, press [/tone]. Any digits you enter from

then on will be sent as tone dialing. When this particular call ends,

the phone automatically returns to pulse dialing mode.

UP094BH.indd 6

9/28/2006 10:46:27 AM

Using the Speed Dial Memory

Storing Numbers in Speed Dial Memory

Your cordless phone can store up to ten numbers (up to 20 digits each) in the speed dial

memory. To store number in memory:

1) When the phone is in standby, press [memory]. The talk/batt low LED ﬂ ashes.

2) Use the keypad to enter the phone number.

(To enter a 2-second pause between numbers, press [redial/

pause]. Each pause counts as a digit. )

3) Press [memory] again.

4) Select the speed dial location where you would like to store the

number ( [0] to [9] ). You will hear a conﬁ rmation tone indicating

that the number has been stored.

NOTE:

• Storing a number to a speed dial location will

overwrite the any previously stored number without

warning.

• When storing numbers into memory and the handset is idle (i.e., no key is

pressed) for more than 30 seconds, it will beep rapidly, and then the phone

will return to standby.

Dialing a Stored Number

1) When the phone is in standby, press [talk], and listen for a dial tone.

2) Press [memory] and enter the speed dial entry ([0] – [9]) that has the stored number

you want to dial. (If you enter a digit that does not contain a stored number, the

handset will beep rapidly, and the phone will not dial.)

Chain Dialing

The speed dial memory is not limited to phone numbers. You can store any number (up

to 20 digits) that you need to enter once your call connects. This is referred to as Chain

Dialing. An example is a frequently reﬁ lled prescription number. Store your pharmacy

phone number in one speed dial and your most frequently reﬁ lled prescription number

as another speed dial. To use, once you ring your pharmacy's automated prescription

line, simply press [memory] and the speed dial number where you stored your account

number.

Erasing a Stored Number from Memory

1) With the phone in standby, press [memory] twice.

2) Press the number of the speed dial entry. A tone indicates that the stored number is

erased from memory.

Changing the Digital Security Code

The digital security code is an identiﬁ cation code used to connect the handset and the

base unit. Normally, setting the code is not necessary.

The ﬁ rst time you charge your handset, the security code is automatically set. In the rare

situation that you suspect another cordless telephone is using the same security code,

you can change the code.

1) Pick up the handset from the base unit. Press and hold [ﬁ nd] on the base.

2) While holding [ﬁ nd], place the handset in the base unit. Leave the handset in the

base for more than three seconds. A new random security code is set.

NOTE: If the handset battery pack is completely discharged or the battery

pack is removed, the digital security code will be lost. If this happens, a new

security code is set automatically next time the battery pack is charged.

Operational Frequency

Frequency 924.516925 – 926.704425 MHz

2,405.155942 – 2,411.718441 MHz

UP094BH.indd 7

9/28/2006 10:46:28 AM

Troubleshooting

If your cordless telephone is not performing to your expectations, please try these simple

steps ﬁ rst. If these steps do not solve your problem, please call our Customer Hotline at

1-800-297-1023. (Mon - Fri 7 am to 7 pm, Sat/Sun 9 am to 5 pm, CST. Phone support is

closed on holidays.)

NOTE: Do not attempt to service this unit yourself. Servicing must be

performed by qualiﬁ ed personnel.

Symptom Suggestion

The in use/ LED won’t

illuminate when the handset is

placed in the base.

• Make sure the AC adapter is plugged into the base and a wall

outlet.

• Make sure the handset is properly seated in the base.

• Make sure that the charging contacts on the handset are clean.

The audio sounds weak

and/or scratchy. • Move the handset and/or base away from metal objects or

appliances and try again.

• Press [channel] to help eliminate background noise.

• Check both ends of the telephone line cord.

Can’t make or receive calls. • Make sure the AC adapter is plugged into the base and a wall

outlet.

• Disconnect the AC adapter for a few minutes. Then reconnect it.

• Change the digital security code. (see page 7.)

• Make sure that the handset is not too far from the base.

• Check the dialing mode used by your telephone company.

The handset doesn’t ring or

receive a page. • The battery pack may be weak. Charge the battery for 15-20

hours.

• The handset may be too far away from the base.

• Move the base away from appliances or metal objects.

• Change the digital security code. (see page 7.)

Severe noise interference • Keep the handset away from microwave ovens, computers,

remote control toys, wireless microphones, alarm systems,

intercoms, room monitors, ﬂ uorescent lights, and electrical

appliances.

• Move the base to another location or turn off the source of

interference.

Liquid Damage

Moisture and liquid can damage your cordless phone. In case of accidental submersion,

please follow these steps.

Case Action

If the handset or base is

exposed to moisture or liquid,

but it only affects the exterior

plastic housing.

Wipe off the liquid, and use as normal.

If moisture or liquid has entered

the plastic housing (i.e. liquid

can be heard in the phone or

liquid has entered the handset

battery compartment or vent

openings on the base).

Handset:

1. Remove the battery cover and leave it off for ventilation.

2. Remove the battery pack by disconnecting.

3. Leave the battery cover off and the battery pack disconnected for

at least 3 days.

4. Once the handset is completely dry, reconnect the battery pack

and the battery cover.

5. Recharge the handset’s battery pack for 20 hours before using

again.

Base:

1. Disconnect the AC adapter from the base unit, cutting off electrical

power.

2. Disconnect the telephone cord from the base unit.

3. Let dry for at least 3 days.

IMPORTANT: You must unplug the telephone line while recharging

the battery pack to avoid charge interruption.

CAUTION:

DO NOT use a microwave oven to speed up the drying process.

This will cause permanent damage to the handset, base and

the microwave oven. After following these steps, if your cordless

telephone does not work, please call our Customer Service Hotline

at 1-800-297-1023.

UP094BH.indd 8

9/28/2006 10:46:28 AM

Precautions!

Before you read anything else, please observe the

following:

Warning!

Uniden America Corporation DOES NOT represent this

unit to be waterproof. To reduce the risk of ﬁ re, electrical

shock, or damage to the unit, DO NOT expose this unit to

rain or moisture.

Rechargeable Nickel-Cadmium Battery

Warning

• This equipment contains a rechargeable nickel-cadmium

battery.

• Cadmium is a chemical known to the State of California to

cause cancer.

• The rechargeable nickel-cadmium battery contained in

this equipment may explode if disposed of in a ﬁ re.

•Do not short-circuit the battery.

• Do not charge the rechargeable nickel-cadmium battery

used in this equipment in any charger other than the one

designed to charge this battery as speciﬁ ed in the

owner’s manual. Using another charger may damage the

battery or cause the battery to explode.

Rechargeable

Nickel-Cadmium

Batteries Must Be

Recycled or Disposed of

Properly

• Uniden voluntarily participates in an RBRC® industry

program to collect and recycle nickel-cadmium batteries

at the end of their useful life, when taken out of service

within the United States.

The RBRC® program provides a convenient alternative to

placing used nickel-cadmium batteries into the trash or

municipal waste stream, which is illegal in some areas.

• Through the RBRC® program, Uniden makes it easy

for you to drop off the used battery at local retailers of

replacement nickel-cadmium batteries. You may also

contact your local recycling center for information on

where to return the used battery. Please call 1-800-8-

BATTERY for information on Ni-Cd battery recycling in

your area. Uniden's involvement in this program is part

of its commitment to protecting our environment and

conserving natural resources.

• RBRC® is a registered trademark of the Rechargeable

Battery Recycling Corporation.

The exclamation point within an equilateral

triangle is intended to alert the user to

the presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

Uniden works to reduce lead content in our PVC coated

cords in our product and accessories.

Warning!

The cords on this products and/or accessories contain lead,

a chemical known to the State of California to cause birth

defects or other reproductive harm. Wash hands after

handling.

Important Safety Instructions

When using your telephone equipment, basic safety

precautions should always be followed to reduce the risk

of ﬁ re, electric shock and injury to persons, including the

following:

1. Do not use this product near water, for example, near a

bath tub, wash bowl, kitchen sink or laundry tub, in a wet

basement or near a swimming pool.

2. Avoid using a telephone (other than a cordless type)

during an electrical storm. There may be a remote risk of

electric shock from lightning.

3. Do not use the telephone to report a gas leak in the

vicinity of the leak.

4. Use only the power cord and batteries indicated in this

manual. Do not dispose of batteries in a ﬁ re. They may

explode. Check with local codes for possible battery

disposal instructions.

5. Do not disassemble any component of this product.

SAVE THESE INSTRUCTIONS

CAUTION

Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions. Do

not open or mutilate the battery, and disconnect the battery

before shipping this product.

The FCC Wants You To Know

This equipment complies with Part 68 of the FCC rules

and the requirements adopted by the ACTA. On the

bottom of this equipment is a label that contains, among

other information, a product identiﬁ er in the format US:

AAAEQ##TXXXX. If requested, this number must be

provided to the telephone company.

An applicable Universal Service Order Codes (USOC)

certiﬁ cation for the jacks used in this equipment is provided

(i.e., RJ11C) in the packaging with each piece of approved

terminal equipment.

A plug and jack used to connect this equipment to the

premises wiring and telephone network must comply with

the applicable FCC Part 68 rules and requirements adopted

by the ACTA. A compliant telephone cord and modular plug

is provided with this product. It is designed to be connected

to a compatible modular jack that is also compliant. See

installation instructions for details.

The REN is used to determine the number of devices that

may be connected to a telephone line. Excessive RENs

on a telephone line may result in the devices not ringing in

response to an incoming call. In most but not all areas, the

sum of RENs should not exceed ﬁ ve (5.0). To be certain of

the number of devices that may be connected to a line, as

determined by the total RENs, contact the local telephone

company. For products approved after July 23, 2001, the

REN for this product is part of the product identiﬁ er that has

the format US:AAAEQ##TXXXX. The digits represented by

## are the REN without a decimal point (e.g., 03 is a REN

of 0.3). For earlier products, the REN is separately shown

on the label.

If this equipment causes harm to the telephone network,

the telephone company will notify you in advance that

temporary discontinuance of service may be required. But

if advance notice isn’t practical, the telephone company will

notify the customer as soon as possible. Also, you will be

advised of your right to ﬁ le a complaint with the FCC if you

believe it is necessary.

The telephone company may make changes in its facilities,

equipment, operations or procedures that could affect the

operation of the equipment. If this happens the telephone

company will provide advance notice in order for you to

make necessary modiﬁ cations to maintain uninterrupted

service.

Please follow instructions for repairing, if any (e.g. battery

replacement section); otherwise do not substitute or repair

any parts of the device except as speciﬁ ed in this manual.

Connection to party line service is subject to state tariffs.

Contact the state public utility commission, public service

commission or corporation commission for information. This

equipment is hearing aid compatible.

Should you experience trouble with this equipment, please

contact Uniden customer service at 800-297-1023. If the

equipment is causing harm to the telephone network, the

telephone company may request that you disconnect the

equipment until the problem is resolved.

NOTICE: According to telephone company reports, AC

electrical surges, typically resulting from lightning strikes,

are very destructive to telephone equipment connected to

AC power sources. To minimize damage from these types

of surges, a surge arrestor is recommended.

Changes or modiﬁ cations to this product not expressly

approved by Uniden, or operation of this product in any way

other than as detailed by the owner's manual, could void

your authority to operate this product.

This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) This

device must accept any interference received, including

interference that may cause undesired operation. Privacy

of communications, may not be ensured when using this

phone.

To ensure the safety of users, the FCC has established

criteria for the amount of radio frequency energy various

products may produce depending on their intended usage.

This product has been tested and found to comply with the

FCC’s exposure criteria. For body worn operation, the FCC

RF exposure guidelines were also met when used with the

Uniden accessories supplied or designed for this product.

Use of other accessories may not ensure compliance with

FCC RF exposure guidelines and should be avoided.

UP094BH.indd 9

9/28/2006 10:46:28 AM

Radio Interference

Radio interference may occasionally cause buzzing and

humming in your cordless handset, or clicking noises in the

base. This interference is caused by external sources such

as TV, refrigerator, vacuum cleaner, ﬂ uorescent lighting,

or electrical storm. Your unit is NOT DEFECTIVE. If these

noises continue and are too distracting, please check

around your home to see what appliances may be causing

the problem. In addition, we recommend that the base not

be plugged into a circuit that also powers a major appliance

because of the potential for interference. Be certain that the

antenna on the unit is fully extended when needed.

In the unlikely event that you consistently hear other voices

or distracting transmissions on your phone, you may be

receiving radio signals from another cordless telephone

or other source of interference. If you cannot eliminate

this type of interference, you need to change to a different

channel.

Finally, it should be noted that some cordless telephones

operate at frequencies that may cause interference to

nearby TVs and VCRs. To minimize or prevent such

interference, the base of the cordless telephone should not

be placed near or on top of a TV or VCR. If interference

is experienced, moving the cordless telephone farther

away from the TV or VCR will often reduce or eliminate the

interference.

Cordless Telephone Privacy

Cordless telephones are radio devices. Communications

between the handset and base of your cordless telephone

are accomplished by means of radio waves which are

broadcast over the open airways.

Because of the inherent physical properties of radio waves,

your communications can be received by radio receiving

devices other than your own cordless telephone unit.

Consequently, any communications using your cordless

telephone may not be private.

I.C. Notice

TERMINAL EQUIPMENT

Notice: This equipment meets the applicable Industry

Canada Terminal Equipment Technical Speciﬁ cations.

This is conﬁ rmed by the registration number. The

abbreviation, IC, before the registration number signiﬁ es

that registration was performed based on a Declaration

of Conformity indicating that Industry Canada technical

speciﬁ cations were met. It does not imply that Industry

Canada approved the equipment.

Notice: The Ringer Equivalence Number (REN) for this

terminal equipment is marked on the equipment itself.

The REN assigned to each terminal equipment provides

an indication of the maximum number of terminals

allowed to be connected to a telephone interface.

The termination on an interface may consist of any

combination of devices subject only to the requirement

that the sum of the Ringer Equivalence Numbers of all

the devices does not exceed ﬁ ve.

RADIO EQUIPMENT

The term “IC:” before the radio certiﬁ cation number only

signiﬁ es that Industry Canada technical speciﬁ cations were

met. Operation is subject to the following two conditions:

(1) this device may not cause interference, and (2) this

device must accept any interference, including interference

that may cause undesired operation of the device. "Privacy

of communications may not be ensured when using this

telephone".

One Year Limited Warranty

Important: Evidence of original purchase is required for

warranty service.

WARRANTOR: UNIDEN AMERICA CORPORATION

(“Uniden”)

ELEMENTS OF WARRANTY: Uniden warrants, for one

year, to the original retail owner, this Uniden Product to be

free from defects in materials and craftsmanship with only

the limitations or exclusions set out below.

WARRANTY DURATION: This warranty to the original user

shall terminate and be of no further effect 12 months after

the date of original retail sale. The warranty is invalid if the

Product is (A) damaged or not maintained as reasonable

or necessary, (B) modiﬁ ed, altered, or used as part of any

conversion kits, subassemblies, or any conﬁ gurations not

sold by Uniden, (C) improperly installed, (D) serviced or

repaired by someone other than an authorized Uniden

service center for a defect or malfunction covered by this

warranty, (E) used in any conjunction with equipment or

parts or as part of any system not manufactured by Uniden,

or (F) installed or programmed by anyone other than as

detailed by the owner’s manual for this product.

STATEMENT OF REMEDY: In the event that the product

does not conform to this warranty at any time while this

warranty is in effect, warrantor will either, at its option, repair

or replace the defective unit and return it to you without

charge for parts, service, or any other cost (except shipping

and handling) incurred by warrantor or its representatives in

connection with the performance of this warranty. Warrantor,

at its option, may replace the unit with a new or refurbished

unit. THE LIMITED WARRANTY SET FORTH ABOVE IS

THE SOLE AND ENTIRE WARRANTY PERTAINING TO

THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL

OTHER WARRANTIES OF ANY NATURE WHATSOEVER,

WHETHER EXPRESS, IMPLIED OR ARISING BY

OPERATION OF LAW, INCLUDING, BUT NOT LIMITED

TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY

OR FITNESS FOR A PARTICULAR PURPOSE. THIS

WARRANTY DOES NOT COVER OR PROVIDE FOR THE

REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES. Some states do not allow

this exclusion or limitation of incidental or consequential

damages so the above limitation or exclusion may not

apply to you.

LEGAL REMEDIES: This warranty gives you speciﬁ c legal

rights, and you may also have other rights which vary from

state to state. This warranty is void outside the United

States of America and Canada.

PROCEDURE FOR OBTAINING PERFORMANCE

OF WARRANTY: If, after following the instructions in

the owner’s manual you are certain that the Product is

defective, pack the Product carefully (preferably in its

original packaging). Disconnect the battery from the Product

and separately secure the battery in its own separate

packaging within the shipping carton. The Product should

include all parts and accessories originally packaged with

the Product. Include evidence of original purchase and a

note describing the defect that has caused you to return it.

The Product should be shipped freight prepaid, by traceable

means, to warrantor at:

Uniden America Service

4700 Amon Carter Blvd. Fort Worth, TX 76155

UP094BH.indd 10

9/28/2006 10:46:28 AM

UPZZ01094BZ(0)

May be coveredunder one or more of the following U.S. patents:

4,797,916 5,426,690 5,434,905 5,491,745 5,493,605 5,533,010

5,574,727 5,581,598 5,650,790 5,660,269 5,661,780 5,663,981

5,671,248 5,696,471 5,717,312 5,732,355 5,754,407 5,758,289

5,768,345 5,787,356 5,794,152 5,801,466 5,825,161 5,864,619

5,893,034 5,912,968 5,915,227 5,929,598 5,930,720 5,960,358

5,987,330 6,044,281 6,070,082 6,125,277 6,253,088 6,314,278

6,418,209 6,618,015 6,671,315 6,714,630 6,782,098 6,788,920

6,788,953 6,839,550 6,889,184 6,901,271 6,907,094 6,914,940

6,953,118 7,023,176

Other patents pending.

Having Trouble or Need a Part?

Our customer care specialists are hereto help you! Visit our website at www. uniden.com or call our

Customer Hotline at 1-800-297-1023,Mon-Fri, 7 a.m. to 7 p.m. or Sat/Sun, 9 a.m. to 5 p.m. CST.

(Phone support is closed on holidays.)

UP094BH.indd 11

9/28/2006 10:46:28 AM

Uniden America UP094R CORDLESS TELEPHONE - REMOTE UNIT User Manual USERS MANUAL

Uniden America Corporation CORDLESS TELEPHONE - REMOTE UNIT USERS MANUAL

USERS MANUAL

Navigation menu

Namespaces

Views

Navigation