Uniden America UP095R CORDLESS TELEPHONE- REMOTE UNIT User Manual USERS MANUAL

Uniden America Corporation CORDLESS TELEPHONE- REMOTE UNIT USERS MANUAL

USERS MANUAL

UP095BH.indd AUP095BH.indd   A9/26/2006 5:51:19 PM9/26/2006   5:51:19 PM
1Setup GuideEXI4560/EXI4561Step 1 Check the Package ContentsMake sure your cordless phone’s packaging includes the following items.Base Handset AC adapterRechargeablebattery TelephonecordAlso included:    • Owner’s manualStep 2 Install the Handset Battery PackNote  Use ONLY the Uniden rechargeable battery pack supplied with your new phone!Remove the cover.Connect the battery pack with the correct polarity.Replace the cover.Step 3 Set up the BasePlug the AC adapter cord to the DC IN 9V jack (yellow).Route the cord.Plug the AC adapter to a 120V AC power outlet.Note  Use ONLY the Uniden AC adapter supplied with your new phone!Step 4  Charge the Handset Place the handset in the base.Make sure that charge LED illuminates.Charge for 15-20 hours before using your phone.Step 5  Connect to the Phone LinePlug the other end into the telephone wall jack.Route the cord.Plug one end of the telephone cord into the base TEL LINEjack. Step 6  Make & Receive CallsTo Make a CallPress talk/fl ash .Listen for dial tone. Dial the desired number.To Receive a CallPick up the handset and press talk/fl ash .To Hang Up a CallPress end  or return the handset to the base.Additional FeaturesFor more information on these and other features, please refer to your Owner’s Manual.  For your convenience, listed below are important features that will help you set up your new cordless phone.Handset/Base Set up:-  Adjust the Earpiece  Volume o P.25-  Set the Ringer Volume o P.25- Set Tone/Pulse Dialing o P.17Caller ID:Set Caller ID on Call Waiting (CIDCW) o P.15Note: You must subscribe to Caller ID services through your local telephone provider to use Caller ID and CIDCW.Refer to your Owner’s Manual for detailed operations.For answers to questions and to order genuine Uniden parts and accessories 24 hours a day visit our website at www.uniden.com. If you have any problems, you can also call our Customer Hotline at 1-800-297-1023, Mon-Fri 7 a.m. to 7 p.m., Sat/Sun 9 a.m. to 5 p.m. CST. (Phone support is closed on holidays.)UP095BH.indd 1UP095BH.indd   19/26/2006 5:51:20 PM9/26/2006   5:51:20 PM
2Guía de programaciónEXI4560/EXI45611° Paso  Inspección del contenido del embalajeAsegúrese de que haya recibido los siguientes artículos en el paqueteBase ReceptorAdaptador CAPilarecargable CabletelefónicoAdemás va incluido:    • Manual del usuario2° Instalación del paquete de pilas del receptorNota  ¡Use SOLAMENTE el paquete de pilas recargable de Uniden suministrado con su nuevo teléfono!Quite la tapa.negronegronegronegronegrorojo rojoConecte el paquete de pilas con la polaridad correcta.Reponga la tapa3° Paso  Preparación de la baseConecte el adaptador CA en el enchufe (amarillo) DCIN 9V.Pase el cableA la toma CAAl enchufeDC IN 9VAdaptador CA(suministrado)Conecte el adaptador CA en una toma de 120V CA.Nota  ¡Use SOLAMENTE el adaptador CA de Uniden suministrado con su teléfono!4° Paso  Carga del receptorColoque el receptor en la base.Asegúrese de que el LED de carga se ilumine.Cargue el receptor de 15 a 20 horas antes de usar el teléfono.5° Paso  Conexión de la línea telefónicaConecte el otro extremo en el enchufe telefónico de la pared.Al enchufe telefónicoPase el cableCable de la línea telefónica (suministrado)Al enchufe TEL LINEConecte un extremo de la línea telefónica en el enchufe TEL LINE en la base.6° Paso  Realización y recepción de llamadasPara hacer una llamada Oprima talk/fl ash .Espere por el tono de marcación.Marque el número deseado.Para recibir una llamadaLevante el receptor y oprima talk/fl ash .Para colgar una llamadaOprima end  o devuelva el receptor a la base. Características adicionalesPara más información sobre estas y otras características, le rogamos que consulte su Manual del usuario.  Para su conveniencia, hemos listado abajo unas características importantes, las cuales le ayudarán a programar su nuevo teléfono inalámbrico de Uniden.Programación del receptor/base:-  Ajuste del volumen del auricular y del altavoz o P.25-  Programación del volumen del timbre o P.25-  Programación de la marcación por tono/pulso o P.17Identifi cación de llamadas (Caller ID):Programe la Identifi cación de llamadas en Llamadas en espera (CIDCW) o P.15Nota: Usted debe estar suscrito al servicio de Identifi cación de llamadas con su proveedor de telefonía local para poder usar las características de Caller ID y de CIDCWConsulte su manual del usuario para operaciones más detalladas.Para hacer preguntas u ordenar partes genuinas y accesorios de Uniden, llame a nuestra línea para atención al cliente en el 1-800-297-1023.Horario:Lunes - viernes: 7 de la mañana- 7 de la tarde. Sábado/domingo: 9 de la mañana - 5 de la tarde. No habrá ayuda telefónica los días festivos. O, visite nuestra página Web: http://www.uniden.comUP095BH.indd 2UP095BH.indd   29/26/2006 5:51:21 PM9/26/2006   5:51:21 PM
3Setup Guide ...................................................................1Welcome/ Accessibility .................................................4Terminology/ Manual Conventions ..............................5Product Overview ..........................................................6Controls and Functions ................................................7Installing the Phone ......................................................9Choosing the Best Location ................................................ 9Installing the Rechargeable Battery Pack into the Handset....................................................................... 10Installing the Base Unit ..................................................... 11Mounting the Base Unit on a Wall ..................................... 13Basic Setup ..................................................................15Activating AutoTalk ............................................................ 15Activating Caller ID on Call Waiting .................................. 15Programming Your Area Code .......................................... 16Choosing the Dialing Mode ............................................... 17Setting the Language ........................................................ 18Using the Speed Dial Memory ....................................19Storing a Name and Number in Memory .......................... 19Storing Caller ID in Speed Dial Memory ........................... 22Using Your Phone ........................................................23Making and Receiving Calls .............................................23Making a Call from Speed Dial Memory ........................... 23Making a Call from the Caller ID List ................................ 24Redialing the Last Dialed Number .................................... 24Selecting the Ring Tone and Volume ................................ 25Adjusting the Earpiece Volume ......................................... 25Using Call Waiting ............................................................. 26Selecting a Different Channel ........................................... 26Find Handset ....................................................................26Tone Dialing Switch-over .................................................. 27Voice Mail Waiting Indicator .............................................. 27Caller ID and CIDCW (Caller ID on Call Waiting) ......28Caller ID on Call Waiting (CIDCW) ................................... 29Viewing the Caller ID Message List .................................. 29Deleting Information from the Caller ID List ...................... 30Changing the Digital Security Code ..........................31Maintenance ................................................................. 32Troubleshooting ..........................................................35Liquid Damage .................................................................. 37Precautions ..................................................................38The FCC Wants You To Know .......................................... 39I.C. Notice ......................................................................... 41One Year Limited Warranty .........................................42ContentsUP095BH.indd 3UP095BH.indd   39/26/2006 5:51:22 PM9/26/2006   5:51:22 PM
4WelcomeCongratulations on your purchase of the Uniden cordless telephone. This cordless phone is designed for reliability, long life, and outstanding performance.Note: Illustrations in this manual are used for explanation purposes. Some illustrations in this manual may differ from the actual unit. The color of your cordless telephone may vary.Uniden® is a registered trademark of Uniden America Corporation.AutoTalk, AutoStandby and UltraClear Plus are trademarks of Uniden America Corporation.AccessibilityUniden provides a customer service hotline for accessibility questions. If you have a disability and need customer service assistance or if you have any questions about how Uniden’s products can accommodatepersons with disabilities, please call the accessibility voice/TTY line: 1-800-874-9314.A representative is available to talk to you M-F, 8:00 am to 5:00 pm, CST. After hours, you can leave us a message, and we will call you back. Information is also available on our website, www.uniden.com, under the "Accessibility" link.UP095BH.indd 4UP095BH.indd   49/26/2006 5:51:22 PM9/26/2006   5:51:22 PM
5TerminologyBase The main part of the phone that connects to your phone line and lets you make and receive calls.CID Caller ID is available from your telephone provider. With this service, you can see the name and number of incoming callers.CIDCW Caller ID on Call Waiting is available from your telephone provider. With this service, you can see incoming caller information while on another call.Handset A cordless handset that can be placed anywhere in your home or offi ce where AC power is available.Standby The handset may be sitting on the base charging or out of the base cradle, but is NOT in use. [talk/fl ash] has not been pressed and there is no dial tone.Talk When a dial tone has been enabled allowing the user to dial and carry on a conversation with an outside party.Manual ConventionsThis manual uses several different type styles to help you distinguish between different parts of the phone:•lower case bold text with “[ ]” indicates a key or button on the phone• ALL CAPITALS indicates text on the display, such as menu options, prompts, and confi rmation messages•lower case bold text indicates a status light on the phone baseUP095BH.indd 5UP095BH.indd   59/26/2006 5:51:22 PM9/26/2006   5:51:22 PM
6Product OverviewMain Phone Features• 2.4 GHz Extended Range Technology• Caller ID/Caller ID on Call Waiting• 3-Line Backlit LCD• Trilingual Menu Displays• 30 Caller ID Memory• 10 Number Memory Dialing• Last Number Redial• Tone/Pulse Dialing• Page/Find Handset Key• Earpiece/Ringer Volume Controls• Mute or Turn Ringer Off• Hearing Aid Compatible• 20-Channel Auto Scan• Desk or Wall MountableUP095BH.indd 6UP095BH.indd   69/26/2006 5:51:22 PM9/26/2006   5:51:22 PM
7Controls and FunctionsHandset 1. Handset antenna2.  Handset battery compartment 3. Handset earpiece 4. LCD display 5. [vol/ / / ]  (volume & ringer up/down) key 6. [cid/menu] key 7. [/tone/ ] (left cursor) key 8. [redial/pause] key 9. [select] key 10. [memory] key11. [end] key 12. [talk/fl ash] key 13. [#/ ] (right cursor) key 14. [delete/channel] key 15. Handset ringer speaker 16. Handset microphone 17. Handset charging contacts43657891516131014171211214365789151613101417121121UP095BH.indd 7UP095BH.indd   79/26/2006 5:51:22 PM9/26/2006   5:51:22 PM
8Main Base Unit18. in use/ LED19. [fi nd] key 20. Base charging contacts21. Base DC IN 9V jack22. TEL LINE jack21 2219182021 22191820UP095BH.indd 8UP095BH.indd   89/26/2006 5:51:23 PM9/26/2006   5:51:23 PM
9Installing the PhoneChoosing the Best LocationBefore choosing a location for your new phone, here are some important guidelines you should consider:• The location should be close to both a phone jack and a continuous power outlet (one which is not connected to a switch).• The base and handset should be kept away from sources of electrical noise such as motors, microwave ovens, and fl uorescent lighting.• The base can be placed on a desk, tabletop, or mounted on a standard wall plate. For better reception, place the base as high as possible.• The base should be placed in an open area for optimum range and reception.• If your home has specially wired alarm equipment connected to the telephone line, be sure that installing the system does not disable your alarm equipment. If you have questions about what will disable your alarm equipment, contact your telephone company or a qualifi ed installer.Avoid television sets and otherelectronic equipmentChoose a central locationAvoid noise sources such as a window bya street with heavy traffi cAvoid microwave ovensAvoid excessive moisture,extremely low temperatures, dust,mechanical vibration, or shockAvoid other cordless telephonesAvoid heat sources, such as radiators,air ducts, and sunlightAvoid personal computersAvoid television sets and otherelectronic equipmentChoose a central locationAvoid noise sources such as a window bya street with heavy traffi cAvoid microwave ovensAvoid excessive moisture,extremely low temperatures, dust,mechanical vibration, or shockAvoid other cordless telephonesAvoid heat sources, such as radiators,air ducts, and sunlightAvoid personal computersUP095BH.indd 9UP095BH.indd   99/26/2006 5:51:23 PM9/26/2006   5:51:23 PM
10Installing the Rechargeable Battery Pack into the HandsetThe handset is powered by a rechargeable battery pack. Once installed, the battery charges automatically when the handset is placed in the base unit.To install the rechargeable battery pack:1)  Press down on the handset battery case cover (use the fi nger indention for a better grip) and slide the cover downward to remove.2)  Plug the battery pack connector (red & black wires) into the small jack inside the battery compartment. (The connector notches fi t into the grooves of the jack only one-way.) Match the wire colors to the polarity label in the battery compartment, connect the battery, and listen for a click to insure connection. 3)  Make sure you have a good connection by slightly pulling on the battery wires. If the connection is secure, the battery jack will remain in place.4)  Place the battery case cover back in the handset by sliding it upwards until it clicks into place.Note: Use only the Uniden (BT-1006) rechargeable battery pack supplied with your phone.UP095BH.indd 10UP095BH.indd   109/26/2006 5:51:23 PM9/26/2006   5:51:23 PM
11Installing the Base Unit1)  Connect the AC adapter to the DC IN 9V jack and to the standard 120V AC wall outlet.Note:•  Use only the supplied AD-0001 AC adapter. Do not use any other AC adapter.•  Do not place the power cord where it creates a trip hazard or where it could become chafed and create a fi re or electrical hazard.2) Charge the handset by placing in the base unit with the keypad facing forward.Route the cord.Route the cord.UP095BH.indd 11UP095BH.indd   119/26/2006 5:51:23 PM9/26/2006   5:51:23 PM
123)  Make sure that the in use/  LED illuminates. If the LED does not illuminate, check to see that the AC adapter is plugged in and that the handset makes good contact with the base's charging contacts.Note:•  Connect the AC adapter to a continuous power supply (not controlled by a wall switch).•  Place the base unit close to the AC outlet to avoid long extension cords.•  Charge your handset at least 15 - 20 hours before plugging into the phone line. 4)  Once the handset battery pack is fully charged, connect the telephone line cord to the TEL LINE jack and a telephone outlet. If your telephone outlet isn't modular, contact your telephone company for assistance. ModularModularRoute the cord.UP095BH.indd 12UP095BH.indd   129/26/2006 5:51:24 PM9/26/2006   5:51:24 PM
13Mounting the Base Unit on a WallStandard wall plate mountingThis phone can be mounted on any standard wall plate.1)  Plug the AC adapter to the DC IN 9V jack.2)  Plug the AC adapter into a standard120V AC wall outlet.3)  Plug the telephone line cord into the TEL LINE jack. 4)  Route the telephone line cord through the groove as shown.5)  Plug the telephone line cord into the telephone outlet.6)  Align the mounting slots on the base with the mounting posts on the wall. Then push in and down until the phone is fi rmly seated.UP095BH.indd 13UP095BH.indd   139/26/2006 5:51:24 PM9/26/2006   5:51:24 PM
14Direct wall mountingIf you don’t have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:• Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.• Try to mount your phone within 5 feet of a working phone jack to avoid excessive lengths.• Make sure the wall material is capable of supporting the weight of the base and handset.• Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices suitable for the wall material where the base unit will be placed.1)  Insert two mounting screws into the wall (with their appropriate anchoring device), 3-15/16 inches apart. Allow about 1/8 of an inch between the wall and screw heads for mounting the phone.2)  Refer to steps 1 through 6 on page 13 to mount the telephone.UP095BH.indd 14UP095BH.indd   149/26/2006 5:51:24 PM9/26/2006   5:51:24 PM
15Basic SetupThere are fi ve basic options that you will need to set up: AutoTalk, CIDCW (Caller ID on Call Waiting), Area Code, Dial Mode and Language. Activating AutoTalkAutoTalk will allow you to answer the phone simply by removing the handset from the base. You do not have to press a key to answer the incoming call. To activate:1)  When the phone is in standby, press and hold [cid/menu]. The following screen appears.2) Press [select] to turn AutoTalk on.3) Press [end] or return the handset to the base unit to complete the setting. The handset returns to standby.Activating Caller ID on Call WaitingCaller ID allows you to see the name and number of the calling party before you answer the phone. Caller ID on Call Waiting (CIDCW) lets you see the name and number of a call that comes in when you are on the line. You must subscribe to Caller ID service through your local telephone provider to use this feature.1)  When the phone is in standby, press and hold [cid/menu]. The following screen appears.UP095BH.indd 15UP095BH.indd   159/26/2006 5:51:24 PM9/26/2006   5:51:24 PM
162) Press [vol/ / ] to move the pointer to select CIDCW. 3) Press [select] to toggle and turn on Caller ID on Call Waiting.4) Press [end] and return the handset to the base unit to complete the setting. The handset returns to standby.Note: To enable the setting change of CIDCW, you need to return the handset to the base unit when you complete the setting.Programming Your Area CodeIn some areas the telephone company may allow you to place a local call by dialing only 7 digits (instead of 10). If this is the case in your area, you can program your local area code in your phone. Programming your area code will allow you to see the caller’s 7-digit phone number which will allow you to easily return the local call without modifying the number before dialing. If you get a call from outside your area code, you'll see all 10 digits.To program your area code:1)  When the phone is in standby, press and hold [cid/menu]. The following screen appears.2) Press [vol/ / ] to move the pointer to select AREA CODE.3) Press [select]. If an area code was already stored, the phone will display it.4)  Use the number keys ( [0] – [9] ) to enter the 3-digit area code.  If you make an error, use [delete/channel] to backspace.5) Press [select]. A confi rmation tone sounds.6) Press [end] or return the handset to the base unit to complete the setting. The handset returns to standby.UP095BH.indd 16UP095BH.indd   169/26/2006 5:51:24 PM9/26/2006   5:51:24 PM
17Choosing the Dialing ModeYour phone can communicate with the telephone network in two different ways: tone dialing and pulse dialing. These days, most telephone networks use a method called tone dialing, so your phone comes programmed for tone dialing by default.If your phone company uses pulse dialing, you'll need to change your phone's dial mode. There's an easy way to tell: try making a call. If your call connects, your phone's setting is fi ne. If not, you may need to change the dial mode.To change the dial mode:1)  When the phone is in standby, press and hold [cid/menu]. The following screen appears.2) Press [vol/ / ] to move the pointer to select DIAL.3) Press [select] to set the phone to pulse dialing.4) Press [end] or return the handset to the base unit to complete the setting. The handset returns to standby.Note: If your phone system requires pulse dialing and you need to send the DTMF tones during a call, you can temporarily switch over to tone dialing. (Refer to “Tone Dialing Switch-over” on page 27.)UP095BH.indd 17UP095BH.indd   179/26/2006 5:51:26 PM9/26/2006   5:51:26 PM
18Setting the LanguageYou can change the language the handset menu displays. Choose from English, French, or Spanish.To change the language setting:1)  When the phone is in standby, Press and hold [cid/menu]. The following screen appears.2) Press [vol/ / ] to move the pointer to select LANGUAGE.3) Press [select] to select ENG, FR. or ESP.4) Press [end] or return the handset to the base unit to complete the setting. The handset returns to standby.UP095BH.indd 18UP095BH.indd   189/26/2006 5:51:27 PM9/26/2006   5:51:27 PM
19Using the Speed Dial MemoryYour cordless phone allows you to store up to 10 names and numbers in the handset. You can dial these numbers with just a few key presses. The speed dial memory is not limited to phone numbers. You can store any number (up to 20 digits) that you need to enter once your call connects. This is referred to as Chain Dialing. An example is a frequently refi lled prescription number. Store your pharmacy phone number in one speed dial and your most frequently refi lled prescription number as another speed dial. To use, once you ring your pharmacy's automated prescription line, simply press [memory] and the speed dial number where you stored your prescription number and press [select].Note: When editing the speed dial memory, you must press a key within 30 seconds or the phone will return to standby. If you return the handset to the base, the phone will return to standby also.Storing a Name and Number in Memory1)  With the phone in standby, press [memory].2) Enter [0] - [9] or use [vol/ / ] and [vol/ / ] to select the speed dial location where you would like to store this entry, and then press [select] twice.3)  STORE NAME appears and a cursor fl ashes indicating that the phone is ready for the name to be entered.Note: If the selected speed dial number is already assigned, the Edit screen appears. You can select EDIT MEMORY to edit this entry, select DELETE MEMORY to erase this entry, or select GO BACK to choose another speed dial number.UP095BH.indd 19UP095BH.indd   199/26/2006 5:51:27 PM9/26/2006   5:51:27 PM
204)  Enter a name according to the instructions below, then press [select]. If no name is required, go to step 5.• The name can be up to 13 characters.• Use [/tone/ ] and [#/ ] to move the cursor to the desired location.• Press [delete/channel] to delete characters as needed or press and hold to delete all characters.  Refer to the letters on the number keys to select the desired characters.  With each press of a numeric key, the displayed character appears in the following order: upper case letters fi rst, lower case letters next and fi nally the number corresponding to the key.Note: If the next character uses the same number key, you must press [#/ ] to move the cursor over. Otherwise the next time you press the number key, it changes the character that was previously set.  For example, to enter Movies.1) Press [6] once. Then press [#/ ] to move the cursor to the right.2) Press [6] six times.3) Press [8] six times.4) Press [4] six times.5) Press [3] fi ve times.6) Press [7] eight times.Number of times key is pressedkeys 1 2 3 4 5 6 7 8 92abc3def4ghi5jkl6mno7pqrs8tuv9wxyz01operNumber of times key is pressedkeys 1 2 3 4 5 6 7 8 92abc3def4ghi5jkl6mno7pqrs8tuv9wxyz01operUP095BH.indd 20UP095BH.indd   209/26/2006 5:51:28 PM9/26/2006   5:51:28 PM
21If you make a mistake while entering a name Use [/tone/ ] or [#/ ] to move the cursor to the incorrect character. Press [delete/channel] to erase the wrong character. Then enter the correct character. To delete all characters, press and hold [delete/channel].5)  STORE NUMBER is displayed. The cursor fl ashes indicating that the phone is ready for the number to be entered.6)  Use the keypad to enter the phone number; each number can be up to 20 digits. If you need the phone to pause during the dialing sequence, press [redial/pause] to insert a two-second delay between the numbers. You can enter multiple pauses to increase the delay. Each pause counts as a digit. The display shows a P for every pause.7) Press [memory]. You will hear a confi rmation tone, and the following screen appears. Memory storage is complete. 8)  After about 2 seconds, the following screen displays all the speed dial memory entries.9) Press [end] to exit memory setup mode. The phone returns to standby.Note: When storing numbers into memory, if the handset is idle (i.e., no key is pressed) for more than 30 seconds, it will beep rapidly, and the phone will return to standby.UP095BH.indd 21UP095BH.indd   219/26/2006 5:51:28 PM9/26/2006   5:51:28 PM
22Storing Caller ID in Speed Dial MemoryCaller ID names and numbers shown in the Caller ID list can be stored in speed dial memory. To store a caller id name/number to memory:1) Press [cid/menu]. Select the phone number to be stored from the Caller ID list by pressing [vol/ / ] or [vol/ / ].2) Press [memory].3)  Enter a number ( [0] – [9] ) or press [vol/ / ] or [vol/ / ] to select the memory location to be stored.4) Press [select]. You hear a confi rmation tone, and the number is stored in memory. The display returns to the Caller ID list.Note:•  If a number has already been stored in the selected memory number location, a confi rmation screen is displayed. To overwrite, press [vol/ / ] to YES and press [select]. The display returns to the Caller ID list.•  You cannot store a Caller ID message if no phone number appears in the message.UP095BH.indd 22UP095BH.indd   229/26/2006 5:51:29 PM9/26/2006   5:51:29 PM
23Using Your PhoneMaking and Receiving CallsHandset on the base Handset off the baseMaking a call 1)  Pick up the handset from the base.2)  Dial the number.3) Press [talk/fl ash].1) Press [talk/fl ash].2)  Listen for the dial tone.3)  Dial the number.Receiving a call1)  Pick up the handset from the base. (If AutoTalk is on, the phone will answer the call when you pick it up.)2) Press [talk/fl ash].Press [talk/fl ash],[/tone/ ],[#/ ] or any number key. (AutoTalk is on.)Hanging up Press [end] or return the handset to the base.Note: To turn on the AutoTalk feature, see "Activating AutoTalk" on page 15.Making a Call from Speed Dial MemoryTo make a call from speed dial memory:1) Press [memory]. The handset displays your programmed speed dial number.2)  Enter the number ( [0] – [9] ), or press [vol/ / ] or [vol/ / ] to select the speed dial number you would like to dial.3) Press [talk/fl ash]. TALK and the volume setting and the number selected appear on the display. Then the displayed number is dialed.UP095BH.indd 23UP095BH.indd   239/26/2006 5:51:32 PM9/26/2006   5:51:32 PM
24To cancel speed dialingPress [end] to cancel speed dialing. The handset returns to standby. Also, if the handset is idle (e.g., no key is pressed) for 30 seconds, the phone returns to standby.Making a Call from the Caller ID ListYou can place a call directly from the Caller ID list.1) Press [cid/menu] in standby. Use [vol/ / ] or [vol/ / ] to select the phone number that you want to dial. 2)  To have the phone dial a “1” before the displayed Caller ID number, press [1]. To have the phone dial the stored area code before the displayed Caller ID number, press [3].3) Press [talk/fl ash]. The displayed phone number dials automatically.Note: You cannot make a call from the Caller ID list if your cordless telephone is connected to a private branch exchange (PBX).Redialing the Last Dialed Number1)  Remove the handset from the base.2) Press [talk/fl ash].3)  Listen for the dial tone.4) Press [redial/pause].OR1)  Remove the handset from the base.2) Press [redial/pause].3) Press [talk/fl ash].UP095BH.indd 24UP095BH.indd   249/26/2006 5:51:32 PM9/26/2006   5:51:32 PM
25Selecting the Ring Tone and VolumeYour phone has fi ve different ringer tone/volume combinations you can choose from.To select the ringer:1)  With the phone in standby, press [vol/ / ] or [vol/ / ].2)  The phone will sound the different ring tones at different volumes. To turn the ringer off, select RINGER OFF.3)  When the phone sounds the ring tone and volume you wish to use, press [end].Temporarily Mute RingerIf the handset is off the base while an incoming call is ringing, simply press [end] to mute the incoming ring. The ringer will sound with the next incoming call. Note: You can only mute the handset ringer if the handset is off the base when the phone starts ringing.Adjusting the Earpiece VolumeTo change the earpiece volume, press [vol/ / ] or [vol/ / ] during a call.UP095BH.indd 25UP095BH.indd   259/26/2006 5:51:33 PM9/26/2006   5:51:33 PM
26Using Call WaitingIf you subscribe to Call Waiting through your local telephone company, you can receive calls while on the line. To answer a call waiting call:1)  While on the phone, you will hear a call waiting tone. (If you have CIDCW service activated, you will see the name and number of the incoming caller. See page 28 for more information)2) Press [talk/fl ash] to accept the waiting call. After a short pause, you will hear the new caller.3)  To return to the original caller, press [talk/fl ash] again.Selecting a Different ChannelYour phone incorporates UltraClear Plus™ true compander circuitry which virtually eliminates background noise. This innovative technology, together with 20 different channels, provides you with the best possible reception during all your conversations. If you happen to encounter interference while using your phone, you can manually change the phone’s channel for clear operation. To change the channel during a call, press [delete/channel]. SCANNING appears on the display, indicating the phone is changing to another channel. For more information on interference, refer to "Radio Interference" on page 40.Find HandsetTo locate a lost handset, press [fi nd] on the base. The handset will beep for 60 seconds. The beeping will stop when any handset key is pressed, when the handset is returned to the base, or when [fi nd] is pressed. The handset will also stop beeping automatically when an incoming call is received.UP095BH.indd 26UP095BH.indd   269/26/2006 5:51:33 PM9/26/2006   5:51:33 PM
27Tone Dialing Switch-overIf your telephone company requires pulse dialing, you can temporarily switch over to tone dialing after the call connects. This feature is useful when you need tone dialing to use automated such as telephone bank tellers, telephone prescription refi lls, customer support menus, etc.If your phone is set to pulse dialing mode, make your call normally. Once your call connects, press [/tone/ ]. Any digits you enter from then on will be sent as tone dialing. When this particular call ends, the phone automatically returns to pulse dialing mode.Voice Mail Waiting IndicatorIf you subscribe to voice mail service through your local telephone company, you can use your cordless telephone to access your voice mailbox. The voice mail company will provide you with the access number.The in use/  LED on the base of your phone fl ashes whenever you have messages waiting in your voice mailbox. To access your voice mailboxJust dial the access number supplied by your voice mail provider to enter your mailbox. You can program your voice mail access number to a speed dial number.If the voice mail waiting indicator remains on after you have retrieved your messages, press and hold the [fi nd] for 5 seconds. This will reset the indicator.UP095BH.indd 27UP095BH.indd   279/26/2006 5:51:34 PM9/26/2006   5:51:34 PM
28Caller ID and CIDCW (Caller ID on Call Waiting)You must subscribe to  Caller ID services through your local telephone provider to use these features.When the telephone rings, the Caller ID feature allows you to view the caller’s name, phone number, date and time of call. The incoming call information is stored in the Caller ID record. If the Caller ID service includes the caller’s name, the caller’s name appears on the display (up to 15 letters).The date andtime receivedCaller's nameCaller's phone number  You may receive any one of the following messages:  When invalid data is received   INCOMPLETE DATA  When a private name is received   PRIVATE NAME  When a private number is received   PRIVATE NUMBER  When an unknown name is received   UNKNOWN NAME  When an unknown number is received   UNKNOWN NUMBERNote:•  Data errors appear as ” ”.•  If you answer a call before the Caller ID message is received (for example, before the second ring), the Caller ID message will not appear.•  When the call is received via a telephone company that does not offer Caller ID service, the caller’s phone number and name do not appear. (This includes international calls.)•  When the call is received via a private branch exchange (PBX), the caller’s phone number and name may not appear.UP095BH.indd 28UP095BH.indd   289/26/2006 5:51:34 PM9/26/2006   5:51:34 PM
29Caller ID on Call Waiting (CIDCW)If you subscribe to CIDCW offered by your telephone company, you will hear a Call Waiting tone while you are on a call, and the Caller ID data will be displayed at the handset. To accept the waiting call, press [talk/fl ash] (see page 26).Viewing the Caller ID Message ListThe Caller ID list stores information for up to 30 incoming calls - even unanswered calls. You can also view the Caller ID list during a call.1) Press [cid/menu]. The summary screen displays the number of new messages and total messages.2) Use [vol/ / ] to scroll through the messages from the latest to the earliest, or use [vol// ] to scroll through the messages from the earliest to the latest.3) Press [cid/menu] to return to the call, or press [end] to return to standby.Note:•  In Caller ID operation, if no key is pressed for more than 30 seconds, an error tone sounds and the handset returns to standby.•  Each message can be up to 15 characters for the name and 15 digits for the phone number.•  The number of calls from the same Caller ID appears next to the received time. Once you view the new message, the number will be cleared and disappear.•  During a call, don't press [end], or the call will be disconnected.UP095BH.indd 29UP095BH.indd   299/26/2006 5:51:35 PM9/26/2006   5:51:35 PM
30Deleting Information from the Caller ID ListIf the phone receives more Caller ID messages than it can store, the oldest one in the list is automatically deleted. Caller ID data can also be deleted manually.Deleting a Caller ID message1) Press [cid/menu] in standby. Find the message to be deleted from the Caller ID list by pressing [vol/ / ] or [vol/ / ].2) Press [delete/channel].3) Press [vol/ / ] or [vol/ / ] to select YES, and then press [select].Deleting all Caller ID names/numbers1)  With the phone in standby, press [cid/menu].2) Press [delete/channel].3) Press [vol/ / ] or [vol/ / ] to select YES, and then press [select].  You hear a confi rmation tone and all stored Caller ID messages are deleted.Note:•  While using the DELETE ALL? or DELETE MESSAGE? screen, if no key is pressed for more than 30 seconds, an error tone sounds, and the handset returns to standby. •  If you get an incoming call or page, the deleting operation is canceled and you can answer the call or page.UP095BH.indd 30UP095BH.indd   309/26/2006 5:51:36 PM9/26/2006   5:51:36 PM
31Changing the Digital Security CodeTo protect you against misbilled calls which might result from your phone being activated by other equipment, the cordless phone provides AutoSecure™ (which electronically locks your phone when the handset is in the base) and Random Code™ digital security which automatically selects one of over 262,000 digital security codes for the handset and the base. If the handset battery pack is completely discharged or the battery pack is removed, the digital security code will be lost. If this happens, a new security code is set automatically the next time the battery pack is charged. In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code.1)  Remove the handset from the base unit. Press and hold [fi nd] on the base.2) While holding [fi nd], place the handset in the base, and leave the handset in the base for more than 3 seconds. A new random security code is set.UP095BH.indd 31UP095BH.indd   319/26/2006 5:51:37 PM9/26/2006   5:51:37 PM
32MaintenanceSpecifi cationsThe phone complies with FCC Parts 15 and 68.Operating temperature -10°C to 50°C (+14°F to +122°F)AC AdapterPart number AD-0001Input Voltage 120V AC 60HzOutput Voltage 9V DC 210mABattery Part number BT-1006Capacity 500mAh, 3.6VFrequency 924.516925 - 926.704425MHz2,405.155942 - 2,411.718441 MHzNote: To avoid damage to the phone use only Uniden AD-0001 and BT-1006 with your phone.Specifi cations, features, and availability of optional accessories are all subject to change without prior notice.Power FailureDuring the period that the power is off, you will not be able to make or receive calls with the telephone.UP095BH.indd 32UP095BH.indd   329/26/2006 5:51:37 PM9/26/2006   5:51:37 PM
33Talk and Standby TimesWith average use, your handset battery provides approximately 6 hours of talk time and approximately 7 days of standby time. When your handset is not being used and are left off of their base unit, the battery will gradually discharge. You can achieve optimum battery life and performance by returning the handset to the base unit after each use. If the handset is left off of the base unit, the actual talk time duration will be reduced respective to the amount of time the handset is off of the base unit.Low battery alertWhen the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the phone is not in use, LOW BATTERY appears on the LCD and none of the keys will operate. During a call, LOW BATTERY fl ashes and the handset beeps. Complete your conversation as quickly as possible and return the handset to the base unit for charging.Note: Information stored in the phone's memory will be retained for 30 minutes after the battery pack is removed. This includes all setup information, last number dialed, speed dial memory, and the CID list.Even when the battery pack is not being used, it will gradually discharge over a long period of time. For optimum performance, be sure to return the handset to the base unit after a telephone call.UP095BH.indd 33UP095BH.indd   339/26/2006 5:51:37 PM9/26/2006   5:51:37 PM
34Battery replacement and handlingRecharge your phone on a regular basis by returning the handset to the base after each phone call. When the operating time becomes short even after a battery is recharged, please replace the battery. With normal usage, your battery should last about one year. To order replacement batteries, please contact Uniden’s Parts Department. The contact information is listed on the back cover page.Warning: To avoid the risk of personal injury or property damage from fi re or electrical shock, only use the Uniden battery model and Uniden adapter model specifi cally designated for this product.Caution• Use only the specifi ed Uniden battery pack (BT-1006).• Do not remove the battery from the handset to charge it.• Never throw the battery into a fi re, disassemble it, or heat it.• Do not remove or damage the battery casing.Cleaning the battery charging contactsTo maintain a good charge, clean the charging contacts on the handset once a month. Dampen a cloth with plain water. Gently rub the damp cloth over the charging contacts until all visible dirt is removed. Dry the contacts thoroughly before returning the handset to the base.CautionDo not use paint thinner, alcohol, or other chemical products. Doing so may discolor the surface of the telephone and damage the fi nish.UP095BH.indd 34UP095BH.indd   349/26/2006 5:51:37 PM9/26/2006   5:51:37 PM
35TroubleshootingTraveling Out-of-RangeDuring a call, as you begin to move your handset too far from your base unit, noise increases. If you pass the range limits of the base, your call will terminate within one minute.Common IssuesIf your phone is not performing to your expectations, please try these simple steps fi rst. If these steps do not solve your problem, please call our Customer Hotline. See back cover page for contact information.Symptom SuggestionThe in use/  LED won't illuminate when the handset is placed in the base.• Make sure the AC adapter is plugged into the base and wall outlet.• Make sure the handset is properly seated in the base.• Make sure the charging contacts on the handset are clean.The audio sounds weak and/or scratchy.• Move the handset and/or base away from metal objects or appliances and try again.• Press [delete/channel] during a call to help eliminate background noise.• Make sure that the handset is not too far from the base.Can’t make or receive calls.• Check both ends of telephone line cord.• Make sure the AC adapter is plugged into the base and wall outlet.• Disconnect the AC adapter for a few minutes, then reconnect it.• Change the digital security code (see page 31).• Make sure that the handset is not too far from the base.• Check the dialing mode used by your telephone company.UP095BH.indd 35UP095BH.indd   359/26/2006 5:51:37 PM9/26/2006   5:51:37 PM
36Symptom SuggestionThe handset doesn’t ring or receive a page.• The battery pack may be weak. Charge the battery for 15-20 hours.• The handset may be too far away from the base unit.• Place the base unit away from appliances or metal objects.• Change the digital security code (see page 31).• Check the battery pack to ensure there is a secure connection.• Make sure ringer volume isn’t set to “off.”Severe noise interference.• Keep the handset away from microwave ovens, computers, remote control toys, wireless microphones, alarm systems, intercoms, room monitors, fl uorescent lights, and electrical appliances.• Move the base to another location or turn off the source of interference.The Caller ID does not display.• The call was answered before the second ring.• The call was placed through a switchboard.• Charge the handset.• Your Caller ID service may not be active; contact your local telephone service provider.Voice Message Indication does not work.• Contact your local telephone company to make sure that your telephone receives FSK message signaling.• Reset the indicator by pressing and holding [fi nd] for 5 seconds.UP095BH.indd 36UP095BH.indd   369/26/2006 5:51:37 PM9/26/2006   5:51:37 PM
37Liquid DamageMoisture and liquid can damage your cordless phone.• If the handset or base is exposed to moisture or liquid, but only the exterior plastic housing is affected, wipe off the liquid, and use as normal.• If moisture or liquid has entered the plastic housing (i.e. liquid can be heard in the phone or liquid has entered the handset battery compartment or vent openings on the base), follow the steps below:Handset Base1)  Remove the battery cover and leave it off for ventilation.2)  Disconnect the battery pack. Leave the battery cover off and the battery pack disconnected for at least 3 days.3)   Once the handset is completely dry, reconnect the battery pack and the battery cover.4)  Recharge the handset's battery pack for 15 to 20 hours before using.1)  Disconnect the AC adapter from the base, cutting off electrical power.2)  Disconnect the telephone cord from the base.3)  Let dry for at least 3 days.IMPORTANT: You must unplug the telephone line while recharging the battery pack to avoid charge interruption.CAUTION:DO NOT use a microwave oven to speed up the drying process. This will cause permanent damage to the handset, base and the microwave oven. After following these steps, if your cordless telephone does not work, please call our Customer Service Hotline. See back cover page for contact information.UP095BH.indd 37UP095BH.indd   379/26/2006 5:51:37 PM9/26/2006   5:51:37 PM
38Precautions!Before you read anything else, please note the following:Warning!Uniden America Corporation DOES NOT represent this unit to be waterproof. To reduce the risk of fi re, electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture.Rechargeable Nickel-Cadmium Battery Warning• This equipment contains a rechargeable nickel-cadmium battery.• Cadmium is a chemical known to the State of California to cause cancer.• The rechargeable nickel-cadmium battery contained in this equipment may explode if disposed of in a fi re.• Do not short-circuit the battery.• Do not charge the rechargeable nickel-cadmium battery used in this equipment in any charger other than the one designed to charge this battery as specifi ed in the owner's manual. Using another charger may damage the battery or cause the battery to explode.Rechargeable Nickel-Cadmium Batteries Must Be Recycled or Disposed of Properly• Uniden voluntarily participates in an RBRC®industry program to collect and recycle nickel-cadmium batteries at the end of their useful life, when taken out of service within the United States.• The RBRC® program provides a convenient alternative to placing used nickel-cadmium batteries into the trash or municipal waste stream, which is illegal in some areas.• Through the RBRC® program, Uniden makes it easy for you to drop off the used battery at local retailers of replacement nickel-cadmium batteries. You may also contact your local recycling center for information on where to return the used battery.  Please call 1-800-8-BATTERY for information on Ni-Cd battery recycling in your area. Uniden’s involvement in this program is part of its commitment to protecting our environment and conserving natural resources.• RBRC® is a registered trademark of the Rechargeable Battery Recycling Corporation.The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.Uniden works to reduce lead content in our PVC coated cords in our products and accessories.Warning!The cords on this product and/or accessories contain lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling.UP095BH.indd 38UP095BH.indd   389/26/2006 5:51:37 PM9/26/2006   5:51:37 PM
39Important Safety InstructionsWhen using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fi re, electric shock and injury to persons, including the following:1.   Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.2.   Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.3.   Do not use the telephone to report a gas leak in the vicinity of the leak.4.   Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fi re. They may explode. Check with local authorities for possible battery disposal instructions.5.   Do not disassemble any component of this product.SAVE THESE INSTRUCTIONSCAUTION!Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Do not open or mutilate the battery, and disconnect the battery before shipping this product.The FCC Wants You To KnowThis equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA.On the bottom of this equipment is a label that contains, among other information, a product identifi er in the format US: AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.An applicable Universal Service Order Codes (USOC) certifi cation for the jacks used in this equipment is provided (i.e., RJ11C) in the packaging with each piece of approved terminal equipment. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA.A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details.The REN is used to determine the number of devices that may be connected to a telephoneline. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed fi ve (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the telephone provider. For products approved after July 23,2001, the REN for this product is part of the product identifi er that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately UP095BH.indd 39UP095BH.indd   399/26/2006 5:51:38 PM9/26/2006   5:51:38 PM
40shown on the label.If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn't practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to fi le a complaint with the FCC if you believe it is necessary. The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifi cations to maintain uninterrupted service. Please follow instructions for repairing, if any (e.g. battery replacement section); otherwise do not substitute or repair any parts of the device except as specifi ed in this manual. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information. This equipment is hearing aid compatible.Should you experience trouble with this equipment, please contact Uniden customer service at 800-297-1023. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.NOTICE: According to telephone company reports, AC electrical surges, typically resulting from lightning strikes, are very destructive to telephone equipment connected to AC power sources. To minimize damage from these types of surges, a surge arrestor is recommended.Changes or modifi cations to this product not expressly approved by Uniden, or operation of this product in any way other than as detailed by the owner's manual, could void your authority to operate this product.This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this phone.To insure the safety of users, the FCC has established criteria for the amount of radio frequency energy various products may produce depending on their intended usage. This product has been tested and found to comply with the FCC's exposure criteria. For body worn operation, the FCC RF exposure guidelines were also met when used with the Uniden accessories supplied or designed for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines and should be avoided.Radio InterferenceRadio interference may occasionally cause buzzing and humming in your cordless handset, or caused by external sources such as TV, refrigerator, vacuum cleaner, fl uorescent lighting, or electrical storm. Your unit is NOT DEFECTIVE. If these noises continue and are too distracting, please check around your home to see what appliances may be causing the problem. In addition, we recommend that the base not be plugged into a circuit that also powers a major appliance because of the potential for interference. Be certain that the antenna on the unit is fully extended when needed. In UP095BH.indd 40UP095BH.indd   409/26/2006 5:51:38 PM9/26/2006   5:51:38 PM
41the unlikely event that you consistently hear other voices or distracting transmissions on your phone, you may be receiving radio signals from another cordless telephone or other source of interference. If you cannot eliminate this type of interference, you need to change to a different channel. Finally, it should be noted that some cordless telephones operate at frequencies that may cause interference to nearby TVs and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. If interference is experienced, moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference.Cordless Telephone PrivacyCordless telephones are radio devices. Communications between the handset and base of your cordless telephone are accomplished by means of radio waves which are broadcast over the open airways. Because of the inherent physical  properties of radio waves, your communications can be received by radio receiving devices other than your own cordless telephone unit. Consequently, any communications using your cordless telephone may not be private.I.C. NoticeTerminal EquipmentNOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifi cations. This is confi rmed by the registration number. The abbreviation, IC, before the registration number signifi es that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifi cations were met. It does not imply that Industry Canada approved the equipmentNOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipment itself. The REN assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed fi ve.Radio EquipmentThe term “IC:” before the radio certifi cation number only signifi es that Industry Canada technical specifi cations were met. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. "Privacy of communications may not be ensured when using this telephone".UP095BH.indd 41UP095BH.indd   419/26/2006 5:51:38 PM9/26/2006   5:51:38 PM
42One Year Limited  WarrantyImportant: Evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden") ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below.WARRANTY DURATION: This warranty to the original user shall terminate and be of no further effect 12 months after the date of original retail sale. The warranty is invalid if the Product is (A) damaged or not maintained as reasonable or necessary, (B) modifi ed, altered, or used as part of any conversion kits, subassemblies, or any confi gurations not sold by Uniden, (C) improperly installed, (D) serviced or repaired by someone other than an authorized Uniden service center for a defect or malfunction covered by this warranty, (E) used in any conjunction with equipment or parts or as part of any system not manufactured by Uniden, or (F) installed or programmed by anyone other than as detailed by the owner's manual for this product.STATEMENT OF REMEDY: In the event that the product does not conform to this warranty at any time while this warranty is in effect, warrantor will either, at its option, repair or replace the defective unit and return it to you without charge for parts, service, or any other cost (except shipping at its option, may replace the unit with a new or refurbished unit. THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. LEGAL REMEDIES: This warranty gives you specifi c legal rights, and you may also have other rights which vary from state to state. This warranty is void outside the United States of America and Canada. PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after following the instructions in the owner's manual you are certain that the Product is defective, pack the Product carefully (preferably in its original packaging). Disconnect the battery from the Product and separately secure the battery in its own separate packaging within the shipping carton. The Product should include all parts and accessories originally packaged with the Product. Include evidence of original purchase and a note describing the defect that has caused you to return it. The Product should be shipped freight prepaid, by traceable means, to warrantor at:Uniden America Service4700 Amon Carter Blvd.Fort Worth, TX 76155UP095BH.indd 42UP095BH.indd   429/26/2006 5:51:38 PM9/26/2006   5:51:38 PM
43AAC adapter information.................. 32BBasic setup .................................... 15Battery packInformation................................. 32Installing .................................... 10Preparing and charging ....... 10, 11Replacement and handling ........ 34CCaller ID service ............................ 28Caller ID on call waiting ............. 29Deleting ..................................... 30Making a call.............................. 24Viewing ...................................... 29Call waiting .................................... 26Channel ......................................... 26Charging the battery pack ............. 11Cleaning contacts .......................... 34Controls and functions ................. 7, 8DDial mode ...................................... 17Digital security code ...................... 31E, F, G, H, I, J, K, LEarpiece volume ............................ 25Find handset .................................. 26Installing the phone ......................... 9Interference ................................... 40Liquid damage ............................... 37M, N, O, P, QMaintenance .................................. 32Making a call.................................. 23Precautions.................................... 38RReceiving a call ............................. 23Redial ............................................ 24Ringer tone and volume ................ 25SSpeed dial memoryMaking calls from speed dial memory...................................... 23Storing names and numbers in speed dial memory .................... 19T, UTalk and standby times .................. 33Technical information ..................... 32Tone dialing switch-over ................ 27Traveling out-of-range ................... 35Troubleshooting ............................. 35V, W, X, Y, ZVoice mail waiting indicator ........... 27Wall mounting ................................ 13Warranty ........................................ 42IndexUP095BH.indd 43UP095BH.indd   439/26/2006 5:51:38 PM9/26/2006   5:51:38 PM
44MemoUP095BH.indd 44UP095BH.indd   449/26/2006 5:51:38 PM9/26/2006   5:51:38 PM
45MemoUP095BH.indd 45UP095BH.indd   459/26/2006 5:51:38 PM9/26/2006   5:51:38 PM
46At Uniden, we’ll take care of you!Thank you for purchasing a Uniden product. If you have any questions or problems,please do not return this product to the place of purchase.Having Trouble? Our customer care specialists are here to help you! Visit our website at www.uniden.com or call our Customer Hotline at 1-800-297-1023, Mon-Fri, 7 a.m. to 7 p.m. or Sat/Sun, 9 a.m. to 5 p.m. CST. (Phone support is closed on holidays.)Need a Part? To order headsets, additional handsets, replacement batteries or other accessories, visit our website at www.uniden.com or call 1-800-554-3988, Mon-Fri, 8 a.m. to 5 p.m. CST.Help for our Special Needs CustomersIf you need special assistance due to a disability or have questions on the accessibilityfeatures of this product, please call 1-800-874-9314 (voice or TTY)May be covered under one or more of the following U.S. patents:4,797,916 5,426,690 5,434,905 5,491,745 5,493,605 5,533,0105,574,727 5,581,598 5,650,790 5,660,269 5,661,780 5,663,9815,671,248 5,696,471 5,717,312 5,732,355 5,754,407 5,758,2895,768,345 5,787,356 5,794,152 5,801,466 5,825,161 5,864,6195,893,034 5,912,968 5,915,227 5,929,598 5,930,720 5,960,3585,987,330 6,044,281 6,070,082 6,125,277 6,253,088 6,314,2786,418,209 6,618,015 6,671,315 6,714,630 6,782,098 6,788,9206,788,953 6,839,550 6,889,184 6,901,271 6,907,094 6,914,9406,953,118 7,023,176Other patents pending.UP095BH.indd 46UP095BH.indd   469/26/2006 5:51:38 PM9/26/2006   5:51:38 PM
UPZZ01095BZ(0)© 2007 Uniden America Corporation, Fort Worth, Texas. Contains additional foreign articles. Printed in China.UP095BH.indd 47UP095BH.indd   479/26/2006 5:51:38 PM9/26/2006   5:51:38 PM

Navigation menu