Uniden America UP744R 5.8 GHz Cordless Telephone w/Bluetooth User Manual Owners Manual part 2

Download:
Mirror Download [FCC.gov]
Document ID	493385
Application ID	v+2SZadQH/nqf26g0SevgA==
Document Description	Owners Manual part 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	145.54kB (1819197 bits)
Date Submitted	2004-12-02 00:00:00
Date Available	2005-02-04 00:00:00
Creation Date	2004-11-08 00:53:19
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2004-12-01 13:19:36
Document Title	Owners Manual part 2

UP744.book Page 53 Friday, November 5, 2004 4:22 PM
From a second handset
1) Press corresponding soft key (LAND or MOBILE) on the handset to join the call.
2) To hang up, return the handset to the cradle, or press end on the handset. The
base or other handset will still be connected to the call.
Conferencing with one outside line
To hold a conference call with one outside line, simply have the handsets or base
join the call.
Conferencing with telephone line (LAND / MOBILE)
Follow the steps below to allow both outside lines to participate in a conference
call:
1) During a call, press back/hold/intercom twice to put the first caller on hold.
2) Press the line soft key (LAND or MOBILE) for a free line to make or answer a
second call.
3) When the second call is connected, press menu/select and select % QP H GT G PE G to
initiate a conference call.
4) To disconnect a single caller, press the corresponding soft key (LAND or MOBILE)
to place the caller you wish to keep speaking to on hold and then press the END
soft key to hang up the other caller.
[ 5 3 ] U s in g Y o ur P ho n e
www.uniden.com
Us i n g You r P h o ne
From the base
1) Press corresponding soft key (LAND or MOBILE) on the base to join the
conference call.
2) To hang up, press /flash on the base. The handset(s) will still be connected to
the call.
UP744.book Page 54 Friday, November 5, 2004 4:22 PM
For example, to hang up MOBILE line but leave LAND line connected:
- Press LAND soft key to put LAND line on hold.
- Press end to hang up MOBILE line.
- Press the LAND soft key to take LAND line off hold and continue the
conversation.
To hang up both lines, press talk/flash or
(or
/flash on the base).
Mobile Line Transfer
To forward or receive a call from or to MOBILE line. Follow the steps below;
From MOBILE line
Press the MOBILE soft key during a call, and then the CONNECT soft key.
To MOBILE line
Press menu/select during a call, and select 6T C PU H GT / Q DK N G .
6 T CP U HG TT G F appears and the phone return to standby mode.
Us i n g Y ou r Ph o ne [ 5 4 ]
U s in g Yo u r P h o n e
www.uniden.com
UP744.book Page 55 Friday, November 5, 2004 4:22 PM
You can quickly redial the last 20 phone numbers for each
handset and 10 numbers for the base.
With the phone in standby mode, press redial/ on the
handset (or press the MENU soft key, and then select
redial on the base). This brings up the redial list. Use up/
down key to scroll through the numbers, and select the
number you want to dial.
Press talk/flash (or /flash) or
on the base to dial the
selected number. If you want to call using Mobile line, press the
CALL soft key, then MOBILE soft key. Use up/down key to select
the cellular phone to use and press CONNECT soft key.
You can also display the list for redial number with the phone in
talk mode. After select the redial number, press the DIAL soft
key to redial the number.
note
•Each redial record can
store up to 32 digits.
•To store redial numbers
in the Phonebook, see
page 66.
4GFKCN






%#..
126+105
Deleting Redial Records
If you want to delete a phone number from the redial list, go to the redial list in
standby mode, and select the number you want to delete. Press the OPTIONS soft
key, and select &G NG V G 5 GN G EV K QP , and then ; G U . If you want to delete all the redial
records, select & GN GV G # N N and then ;G U .
[ 5 5 ] U s in g Y o ur P ho n e
www.uniden.com
Us i n g You r P h o ne
Redialing Calls
UP744.book Page 56 Friday, November 5, 2004 4:22 PM
Adjusting the Base Ringer and Speaker
Adjusting the base ringer volume
You can choose from three ringer settings on the base: off, low,
and high. When the phone is in standby mode, go to Rings/
Volumes menu, and then select 4K P IG T 8 Q NW O G . Use up/down key
to select the Tel type (LAND or MOBILE), and press menu/select.
Use up/down key to select the ringer volume, and menu/select.
You will here a confirmation tone.
Adjusting the base speaker volume
You can adjust the volume of the answering machine speaker while a message is
playing. Press volume up/down during a message to choose one of the 10 volume
levels.
You can also set the speaker volume from the base. Go to Rings/Volumes menu, and
then select 5 R GC M GT 8 Q NW OG . Use the up/down key to select the speaker volume, and
then menu/select. You will here a confirmation tone.
Us i n g Y ou r Ph o ne [ 5 6 ]
U s in g Yo u r P h o n e
www.uniden.com
UP744.book Page 57 Friday, November 5, 2004 4:22 PM
Us i n g You r P h o ne
Using the Handset Volume Setting Menu
Ringer: Adjust the handset ringer volume
You can choose from three different ringer
volume settings on your handset: off, low,
and high. When the phone is in standby
mode, go to the Rings/Volumes menu, and
then select Ringer Options. Use up/down key
to select the Tel type (LAND or MOBILE), and
press menu/select. Use up/down key to
select the ringer volume, and menu/select.
You will here a confirmation tone.
Ear speaker: Adjust the handset earpiece
volume During a call.
You can choose from six volume levels for the
earpiece speaker. To adjust the earpiece
volume, go to Speaker Setup menu, and select
' C TR K GE G 8 QN W OG and select the volume level
you want to use.
4KPIGT1RVKQPU
4KPIGT8QNWOG
*KIJ
5'.'%6
5RGCMGT5GVWR
5'.'%6
5'.'%6
'CTRKGEG
5'.'%6
You can also adjust the earpiece volume
during a call by pressing volume up/down
keys, and then up (to make it louder) or
down (to make it softer).
[ 5 7 ] U s in g Y o ur P ho n e
www.uniden.com
UP744.book Page 58 Friday, November 5, 2004 4:22 PM
Speaker: Adjust the handset speaker volume
You can choose from six volume levels for the handset
speakerphone. To adjust the speaker volume, go to Speaker Setup
menu, and select 5 RG C MG T X QN W OG select the volume level you want
to use.
You can also adjust the handset speaker volume during a call by
and then (to make it louder) or down (to make it softer).
5RGCMGT
5'.'%6
Audio Tone
If you aren't satisfied with the audio quality of your phone,
you can adjust the Audio Tone of the earpiece. Your phone
gives you three audio tone options: low, Natural or high. Go
to Speaker Setup menu, and select #W F KQ 6 Q PG and select the
option that sounds best to you.
(Audio tone adjustments only apply to the earpiece, not
the speakerphone.)
#WFKQ6QPG
+EY6QPG
www.uniden.com
Us i n g Y ou r Ph o ne [ 5 8 ]
U s in g Yo u r P h o n e
5'.'%6
UP744.book Page 59 Friday, November 5, 2004 4:22 PM
While the handset is ringing, you can mute the handset ringer for this call by
pressing end on the handset. To mute the base ringer press
on the base. The
phone will ring again on the next call.
note
You can only mute the
handset ringer if the
handset is off the base
when the phone starts
ringing.
Mute the Handset Microphone
When you're on the phone, press the OPTIONS key and select /W V G to turn off the
microphone so the caller can't hear you. The display shows / WV G 1 P while the
microphone is muted. To turn off muting, repeat the above step again.
Tone Dialing Switch Over
If your telephone company uses pulse dialing, you can
switch over to tone dialing after the call connects. This
feature is useful when you need tone dialing to use any
automated menu systems, such as telephone bank tellers,
telephone prescription refills, customer support menus,
etc.
If your phone is set to pulse dialing mode, make your call
normally. Once your call connects, press the */tone key. Any digits you enter from
then on will be sent as tone digits. When this particular call ends, the phone
automatically returns to pulse dialing mode.
[ 5 9 ] U s in g Y o ur P ho n e
www.uniden.com
Us i n g You r P h o ne
Mute
UP744.book Page 60 Friday, November 5, 2004 4:22 PM
Privacy Mode
Privacy mode prevents interruption from other registered
handsets or the base. This works only when the phone is in use.
While on a call, press the OPTIONS soft key on the handset or
base. Use up/down key to select call privacy. Privacy mode On
and appear in the display. To exit Privacy Mode, Use the same
procedure. Privacy Mode Off appears.
6CNM
2TKXCE[OQFG1P
126+105
Find Handset
To locate the handset, press end/find hs on the base when the
phone is in standby mode. Select the handset to page. The
handset beep for 60 seconds, and 2C IK P I appears on the handset
display. To cancel paging, press any key on the handset or end/
find hs on the base.
Us i n g Y ou r Ph o ne [ 6 0 ]
U s in g Yo u r P h o n e
www.uniden.com
UP744.book Page 61 Friday, November 5, 2004 4:22 PM
R e mi n d er ( H an d s e t o nl y )
Reminder (Handset only)
Your phone has a built-in calendar that you can use to schedule
reminders and appointments (all the way through December 31,
2099). You can set alarms for up to 30 different events.
A pop-up screen appears and reminder tone sounds when the
scheduled time & date comes. To show detailed info on the
reminder, press the VIEW soft key. To mute the reminder tone,
press the MUTE key.
4GOKPFGT
5'.'%6
To reset the reminder and clear the screen, press end when
reminder tone stops. 6QFK UOKU U4GOK PFG T&KUR NC[RG TUU& +5/+ 55
appears. Press the DIMISS key. The phone return to standby mode.
Scheduling a reminder
Select the reminder option to show Reminder (Calendar). Today
is highlighted. If the reminder is set for the morning, a bar
appears lower left of the date number; if the reminder is set for
the afternoon or evening, a bar appears lower right of the date
number. Use up, down, right or left key to move the cursor to
the date.
[ 6 1 ] R e m i nd e r ( H an d s e t o nl y )
4GOKPFGT
 /C[
5%*'&7.'
www.uniden.com
UP744.book Page 62 Friday, November 5, 2004 4:22 PM
/10
126+105
6) If you want to set recurrence, press , and press menu/
select. Select frequency (None, Daily, Weekly, Monthly,
Yearly) from the list. Press menu/select when you're finished.
7) If you want your phone to ring when this reminder occurs, move to the line
indicated, and press menu/select. Select the ringer tone you want the phone to
ring. Press menu/select when you're finished.
8) To enter a reminder text for this reminder, select and press menu/select. 'F K V
/ G UU CI G appears. You can enter up to 80 digits. Press menu/select when you're
finished.
9) When everything is correct, press the DONE soft key.
Editing and deleting reminders
You can edit reminders by pressing the SCHEDULE soft key and selecting the
reminder by pressing the OPTION key. Once the reminders is selected, you can edit
the date, time, reminder tone, and text the same way you entered them for a new
entry.
To delete reminders, select the reminder and press the OPTION soft key. Select
& G NG V G 5G N GE V KQ P . To delete all reminders, select & G NG V G # NN .
www.uniden.com
R e m in d e r ( H an d s e t o nl y ) [ 6 2 ]
R e mi n d er ( H an d s e t o nl y )
1) Press menu/select to select day.
2) Press the STORE soft key to add a reminder.
3) Use the number keypad to change the day and time.
4) Use the number keypad or * to select the hours and minutes.
Press menu/select when you're finished.
5) To change the title, select and press menu/select.
Use the number keypad, */tone, #, left, right key, and the
DELETE soft key. Press menu/select when you're finished.
UP744.book Page 63 Friday, November 5, 2004 4:22 PM
Your phone lets you store up to 100 entries in each handset and base. You can store
up to 4 phone numbers for each name in your phonebook (for a total of 400
numbers), and you assign names to groups for easy searching. You can store a
distinctive ringer tone, picture display, and backlight color to your each or group.
You can enter your phonebook by Pressing the phonebook
key on the handset or base.
Creating and Editing Phonebook Entries
Go to the phonebook and press the OPTIONS soft key. Select 0G Y ' PV T [ to store, or
' F KV  5G N GE VK Q P to edit the location. Enter as much of the following information as
you want. Press menu/select to enter each entry and confirm the selection. When
you're finished, press the DONE soft key to save this phonebook entry.
[ 6 3 ] U s in g t h e P h on e bo o k
www.uniden.com
U s i n g t h e P ho n e b o o k
Using the Phonebook
UP744.book Page 64 Friday, November 5, 2004 4:22 PM
Step 1: Name
note
,CPG5OKVJ
Select ,
and use the keypad to enter the name for
this entry. You can enter up to 16 characters. If you don't
want to enter a name, your phone will store this entry as
No Name. Press menu/select when you're finished, and
your phone will go back to the current phonebook entry.

(NKEMGT
126+105
You can select an icon to remind you which number this is: home
You can save up to 4
numbers for each
phonebook entry. If you
try to save more than 4
numbers for a
phonebook entry, your
phone will display Dial
data is full. You'll have
to delete one of the
existing numbers before
you add a new one.
www.uniden.com
, mobile ,
finished.
, work
, or general phone number. Press menu/select when you're
Step 3: Unique Ring
Select ,
to attach a special ring to this phone. Select the ringer tone you want
the phone to use when this person calls, or select 0 Q 5 GN GE V KQ P to have the phone
use its regular ringer tone. Press menu/select when you're finished, and your phone
will go back to the current phonebook entry.
U s in g t he P h on e b oo k [ 6 4 ]
U si n g t h e P h on eb o o k
Step 2: Number ,
Select ,
and enter a phone number for this entry.
If you need your phone to pause between digits when it's /'55#)' ,CPG5OKVJ

dialing (for example, to enter an extension or an access
126+105
code), press the PAUSE soft key to insert a two-second
pause. You'll see a 2 in the display. You can stack more
than one pause together if two seconds isn't long enough. Each pause counts as
one digit; you can enter up to 20 digits for the phone number. Press menu/select
when you're finished, and your phone will go back to the current phonebook entry.
UP744.book Page 65 Friday, November 5, 2004 4:22 PM
U s i n g t h e P ho n e b o o k
Step 4: Unique Display (Handset only)
Select
to attach a special screen display to this entry.
Select the display you want the phone to use when this
person calls, or select No Selection to have the phone
use its regular display. You can press the VIEW soft key
to see the display choices:
Press menu/select when you're finished, and your phone
will go back to the current phonebook entry.
Step 5: Phonebook Group ,
Select ,
to place this entry into a phonebook group. Select the group (0-9)
you want this entry to belong to, or select No Selection to leave the entry outside
of any group. Press menu/select when you're finished, and your phone will go back
to the current phonebook entry. See page 68 for information on creating and
editing groups. To select a group, see page 68.
Step 6: Speed Dial ,
Select 0-9 to save this number to one of the 10 speed dial numbers or 0Q 5G N GE V KQ P
if you don't want to save it to a speed dial number. If there's already a phone
number saved to the speed dial number you select, your phone will ask if you want
to overwrite the number. Press menu/select when you're finished, and your phone
will go back to the current phonebook entry.
[ 6 5 ] U s in g t h e P h on e bo o k
www.uniden.com
UP744.book Page 66 Friday, November 5, 2004 4:22 PM
Storing Caller ID or Redial Numbers in the Phonebook
You can store Caller ID or redial numbers in your phonebook so you can use them
later. Go to the Caller ID list or redial list and select the number you want to store.
(If the Caller ID information didn't include the number, then you can't store it.)
Press the OPTIONS soft key and select # F F V Q 2 JQ PG D QQ M . Your phone will create a
phonebook entry so you can enter the additional information shown on page 63.
If the number you want to save is already in the phonebook, your phone will display
6 J KU  FC VC  KU  CN T GC F[  UV Q TG F  .
With the OPTIONS soft key, you can delete phonebook entries, copy entries to
another handset, check how many empty phonebook and speed dial entries you
have available, sort your phonebook by groups, and name phonebook groups.
Deleting phonebook entries
Go to the phonebook and select the entry you want to delete. Press the OPTIONS
soft key and select &G N GV G . Use up/down key to select & GN G VG 5 GN G EV K QP . Your phone
will ask you to confirm select ; G U .
To delete all the entries from your phonebook, go to the phonebook and press the
OPTIONS soft key without selecting an entry. Select & GN GV G , and then & GN G VG  #N N .
Your phone will ask you to confirm select ; G U .
Copying phonebook entries to another handset
When you copy entries to another handset or base, the group and speed dial
information won't be transferred. Your phone will cancel the copying process if any
one of the following things occurs:
www.uniden.com
U s in g t he P h on e b oo k [ 6 6 ]
U si n g t h e P h on eb o o k
Managing the Phonebook
UP744.book Page 67 Friday, November 5, 2004 4:22 PM
U s i n g t h e P ho n e b o o k
-- If the handset you are copying to doesn't have enough memory (the phone will show
"Not enough memory in receiving unit").
-- If the handset you are copying to already has that phone number in its phonebook.
-- A call comes in during the copying process.
To copy a single entry, go to the Phonebook and select the entry
you want to copy. Press the OPTIONS soft key and then % Q R[ 
5 G NG E VK Q P . Select the handset or base you want to copy to the
entry to.
To copy all the phonebook entries, go to the phonebook and
press the OPTIONS soft key without selecting an entry. Select
then % QR [ # N N . Select the handset or base you want to copy to
the entry to.
6QYJKEJWPKV!
*CPFUGV
*CPFUGV
*CPFUGV
$CUG
5'.'%6
Checking the number of stored entries
To see how many phonebook entries you have, go to the
phonebook and press the OPTIONS soft key and select 2J Q PG $ M
% C RC E KV [. The phone will show you how many stored names
(entries) and how many stored phone numbers (total) you have.
1RVKQPU
0GY'PVT[
'FKV5GNGEVKQP
&GNGVG5GNGEVKQP
%QR[5GNGEVKQP
To see your speed dial entries, go to the phonebook and press the
OPTIONS key and select % J GE M & K CN U . The phone will show you
which speed dial numbers have phone numbers stored in them.
[ 6 7 ] U s in g t h e P h on e bo o k
2JQPG$M%CRCEKV[
&GNGVG#NN
5'.'%6
www.uniden.com
UP744.book Page 68 Friday, November 5, 2004 4:22 PM
Changing the sorting order
note
To make a speed dial
using the mobile line,
press the MOBILE soft
key.
To change the sorting of your phonebook, go to the
phonebook and press the OPTIONS soft key and select
5 Q TV . Select # N RJ C DG V KE CN N [ to see the list of names in
alphabetical order; select )TQW R to see the list of groups in
alphabetical order. Enter a letter from the keypad to jump
to the first entry beginning with that letter.
LCD 83-1
Naming phonebook groups
To name a group, go to the phonebook and press the OPTIONS soft key and select
' F KV  )T QW R 0 C OG . Select the group number (0-9) you want to edit, and enter the
name you want for this group using the number keypad. Press menu/select when
you're finished.
To delete the group, go to the phonebook, and view the list of groups (see xx).
Press the OPTIONS soft key and select Delete and then Delete Groups. Your phone
will ask you to confirm select ; G U .
Making Calls with the Phonebook
To call someone in your phonebook, go to the phonebook and select that person's
phonebook entry. Select the number (one of the four available) that you want to
call, and then press the CALL soft key Press the LAND or MOBILE soft key. The
number at the top of the list will dial. You can also dial the number with the phone
in talk mode. After select number, press the DIAL soft key.
www.uniden.com
U s in g t he P h on e b oo k [ 6 8 ]
U si n g t h e P h on eb o o k
Your phone comes with 10 groups to organize your phonebook. You can name
groups things like "Family" or "Friends" or "Softball team" to let you find entries in
your phonebook more quickly.
UP744.book Page 69 Friday, November 5, 2004 4:22 PM
[ 6 9 ] U s in g t h e P h on e bo o k
www.uniden.com
U s i n g t h e P ho n e b o o k
Using the Speed Dial
Flip the top panel up. Press and hold the number of the speed dial entry you want
to call until the phonebook location appears. Use up/down key to select a number.
Press talk/flash, , or the LAND soft key
UP744.book Page 70 Friday, November 5, 2004 4:22 PM
Caller ID Features
If you subscribe to Caller ID from your phone company,
your phone will show you the caller's phone number and
name (if available) whenever a call comes in:
%CNNGT+&

If you subscribe to both Call Waiting and Caller ID the
phone also show you the name and the number of call
waiting calls (that is, calls that come in while you're on
the line.)
If your cellular phone is a Bluetooth v 1.1 compliant, the
phone allow you to register your cellular phone to use
them as one of a handset.
Using the Caller ID List
2/
,CPG5OKVJ

.#0&
/1$+.'
#
/'55#)' #TVVUWDCMK

.#0&
/1$+.'
www.uniden.com
C al le r ID F e at u r es [ 7 0 ]
C a l l e r I D Fe a t u r e s
You can store up to 100 Caller ID numbers in each handset
or the base. To see the Caller ID list, press the caller id key
on the handset or base. The phone will show the Caller ID
list. You can use up/down key to scroll through the list, or
you enter a letter with the keypad to jump to the first
caller ID name that starts with that letter. If anyone in
your phonebook has called you, the icon assigned to their
number will appear in the Caller ID list.
UP744.book Page 71 Friday, November 5, 2004 4:22 PM
1RVKQPU
&GNGVG5GNGEVKQP
note
&GNGVG#NN
#FFVQ2JQPGDQQM
%+&%CRCEKV[
Calling someone from the Caller ID list
Go to the Caller ID list and select the number you want to call.
If you need to add a "1" to the number for a long distance call,
5'.'%6
press */tone. If you need to add your saved area code to the
number, press #. Then press talk/flash, , or the LAND or MOBILE soft key to dial
the number.
When you delete a Caller
ID number, you delete it
permanently.
Deleting Caller ID numbers
To delete only one Caller ID number, go to the Caller ID list and select the number
you want to delete. Press the OPTION soft key, and select &G N GV G 5 G NG E VK QP . When
the phone asks you to confirm, select ;G U .
To delete all the Caller ID numbers, go to the Caller ID list and press the OPTION
soft key. Select &G NG V G # NN . When the phone asks you to confirm, select ;G U .
[ 7 1 ] C a l l e r ID F ea t u re s
www.uniden.com
C a ll er ID Fe a tur e s
If you want to see how many Caller ID numbers are stored in
your phone, Press the caller id key, and then the OPTIONS soft
key. Select% + & % CR CE K V[.
UP744.book Page 72 Friday, November 5, 2004 4:22 PM
note
The Answering Machine
only works with the land
line.
The phone has a built-in answering machine that answers and records incoming
calls. You can also use your answering machine to record a conversation, leave a
voice memo message, or announce a special outgoing message to callers when
you're away from your phone.
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
www.uniden.com
Digital Tapeless Recording
Up to 12-15 minutes of Recording Time
Call Screening
Personal or prerecorded Outgoing Messages
Voice Prompts (English, Spanish, or French)
Time and Day Announcement
Remote Message Retrieval
Toll Saver
Conversation Recording
Voice Memo
Message Alert On/Off
Retrieve Messages using Handset
Do Not Disturb
Hands-free Speakerphone
An s we r in g M a c hi ne [ 7 2 ]
Answering Machine
Answering Machine
UP744.book Page 73 Friday, November 5, 2004 4:22 PM
To access the answering machine settings, go to the System Setup Menu and select
Answer Machine.
Security Code
If you want to call in and get your messages when you're away
from, you'll have to set a security code. Go to # P UY G T / CE JK P G
and select 5 G EW T KV [ % QF G . use the keypad to enter a two-digit
number (01-99), and press menu/select when you're done. A
confirmation tone tells you the security code has been saved.
5[UVGO5GVWR
5'.'%6
5GEWTKV[%QFG

5'.'%6
[ 7 3 ] A n s we r in g M a c hi ne
www.uniden.com
Answering Machine
Setting Up the Answering Machine
UP744.book Page 74 Friday, November 5, 2004 4:22 PM
Record Time
You can set how long a caller has to leave a message before the
answering machine hangs up. Go to #P U YG T / C EJ K PG and select
4 G EQ T F 6K O G . Then select the maximum length of messages;
choose from 1 minute or 4 minutes. The Announce Only feature
makes the answering machine answer call but it won't let callers
leave a message. When the Announce Only feature is on, and
will appear on the base.
www.uniden.com
4KPI6KOG
6QNN5CXGT
6KOGU
6KOGU
VKOGU
5'.'%6
4GEQTF6KOG
OKPWVG
OKPWVGU
#PPQWPEG1PN[
5'.'%6
An s we r in g M a c hi ne [ 7 4 ]
Answering Machine
Ring Time
You can set the number of times the phone will ring before the
machine answers the call. Go to #P U YG T/ C EJ K PG and select 4 KP I
6 K OG . Then select the number of times you want the phone to
ring; choose from 2, 4, or 6 times. The Toll Saver feature makes
the answering machine answer after two rings if you have new
messages and after four rings if you don't. If you call long
distance to check your messages, Toll Saver lets you hang up
after three rings and not get charged for the call.
UP744.book Page 75 Friday, November 5, 2004 4:22 PM
The message alert turns off automatically after you listen to all
your new messages. You can also turn off the message alert by
pressing any key on the base.
Language
To change the language of your answering machine's voice
prompts and pre-recorded greetings, go to # PU Y GT  /C EJ K PG and
select . CP IW C IG . Select ' PI N KU J , (T C P 㩟 CK U (French), or ' UR C 㩌 QN
(Spanish).
Answering Machine
Message Alert
if you want the answering machine to beep every 15 seconds
whenever you have unheard messages, turn on the message alert
tone. Go to #P U YG T / C EJ K PG and select / G UU C IG # N GT V . Select 1P .
A confirmation tone tells you the setting has been saved.
/GUUCIG#NGTV
1P
1HH
5'.'%6
.CPIWCIG
'PINKUJ
(TCPã©ŸCKU
'URCã©ŒQN
5'.'%6
Call Screen
If you want to be able to listen to the caller's message before
you answer, turn on the call screen feature. Go to# P UY G T
/ C EJ K PG and select % C NN  5E T GG P . Select 1P to turn on call
screening.
%CNN5ETGGP
1P
1HH
5'.'%6
[ 7 5 ] A n s we r in g M a c hi ne
www.uniden.com
UP744.book Page 76 Friday, November 5, 2004 4:22 PM
note
•To finish the setting,
press back/hold/
intercom.
•You will hear a beeping
tone while you set
greetings and play
massages from the
handset.
•Your own greeting
must be more than 2
seconds and less than
30 seconds.
Your answering machine comes with a prerecorded greeting: "Hello. No one is
available to take your call. Please leave a message after the tone." You can use this
greeting, or you can record your own.
Recording a greeting
From the base
To record your own greeting, make sure the phone is in standby mode. Go to Record
Greeting, and then press menu/select. Press the START soft key. After the answering
machine says, "Record greeting," you can start recording. The message counter
displays 30 and then begins to count down. When you're finished, press the STOP
soft key. The answering machine will play back your greeting so you can hear it.
From the handset
Select , and then AnsMachine. The display tells you how many new and old
messages you have.
Press
/8. After the answering machine says, 4G E QT F I TG G VK P I , you can start
recording. When you're finished, press
/8 key.
Choosing a greeting
From the base
To choose between the two greetings, first make sure the phone is in standby mode.
Go to #P U YG T / CE J KP G , and select GreetingOptions. The greeting currently being
used will be played. If you want to use the other greeting, press the CHANGE soft
key.
www.uniden.com
An s we r in g M a c hi ne [ 7 6 ]
Answering Machine
Setting Your Outgoing Greeting
UP744.book Page 77 Friday, November 5, 2004 4:22 PM
From the handset
Select , and then AnsMachine. The display tells you how many new and old
messages you have.
Press
/6. The greeting currently being used will be played. If you want to use
the other greeting, press the key again.
If you want to delete your greeting, press the
/4 soft key while the greeting is
playing (You can't delete the prerecorded greeting.)
Using the Answering Machine
Turning On the Answering Machine
To turn your answering machine on and off, on the handset, go to #P UY G T / CE J KP G ,
and select 1 P 1 H H UG V VK P I . Choose 1 P to turn the answering machine on or 1H H to
turn it off. You can also turn on/off the machine using handset remote function.
Select , and then AnsMachine. The display tells you how many new and old
messages you have. Press
between On and Off.
[ 7 7 ] A n s we r in g M a c hi ne
/9. Each time the key is pressed the setting switches
www.uniden.com
Answering Machine
If you want to delete your greeting, press the DELETE soft key while the greeting is
playing (You can't delete the prerecorded greeting.)
UP744.book Page 78 Friday, November 5, 2004 4:22 PM
www.uniden.com
An s we r in g M a c hi ne [ 7 8 ]
Answering Machine
For from the base, with the phone in standby mode, press answer on/off. / '5 5 #) '
If the number is flashed, then there are new messages waiting for you. To do
turn your answering machine off, press answer on/off.
Reviewing Messages
When you have a new message, the new message LED on the handset blinks and the
base LCD rights. The LED and the base LCD will turn off stops blinking when you've
listened to all your new messages. The answering machine plays your new messages
first. After you play all your new messages, you can then play your old messages.
Old messages will be played in the order in which they were received.
10.
UP744.book Page 79 Friday, November 5, 2004 4:22 PM
Playing your messages
note
From the base
From the handset
Press
. The answering machine tells
you how many new and old messages
you have. It announces the message
number, plays the message, then
announces the time and date that
message was received.
Select
, and then AnsMachine. The
display tells you how many new and old
messages you have. Press
/2 to play
your messages. After playing the
message, the answering machine
announces the time and date that
message was received.
Repeating a message
Press
once to repeat to the
Press
/1 once to repeat to the
beginning of the current message. Press beginning of the current message.Press
repeatedly to go back to a previous
/1 repeatedly to go back to a
message.Press and hold
to rewind
previous message.
through the current message.
Skipping a message
Press
to go to the beginning of the Press
/3 to go to the beginning of
next message. Press and hold
to fast the next message. Press and hold
forward through the current message.
/3 to fast forward through the
current message.
Delete a message
While a message is playing, press
to While a message is playing, press
/4
delete it. The message is permanently
to delete it. The message is permanently
deleted.
deleted.
Delete all messages
While the phone is in standby, press
to delete all messages. When the
answering machine asks you to confirm,
press delete again. All messages are
permanently deleted.
Stop reviewing messages
[ 7 9 ] A n s we r in g M a c hi ne
Press
to stop the message
playback and return to standby.
•You can't delete
unheard messages. If
you try to delete
messages before
listening to them, the
answering machine will
beep and say "Please
playback all
messages."
•If you press during
the first two seconds
(or press /1 during
the first 4 seconds) of
a message, the
answering machine
goes back to the
previous message.
Press
/5 to stop the message
playback. Press end to exit the message
system and return to standby.
www.uniden.com
Answering Machine
You can review your messages from the base or from the handset:
UP744.book Page 80 Friday, November 5, 2004 4:22 PM
note
•If the recording
memory is full,
7PCXCKNCDNG appears
in the display. You can
not record a
conversation until you
clear some messages
from the memory.
•Every state has
different regulations
governing the
recording of
conversations over the
telephone. Make sure to
check your local, state
and federal laws before
using this product to
record any telephone
conversation in order
to determine that your
use is in compliance
with such laws or
guidelines.
•You can not record
intercom conversations.
•Only one handset can
screen calls at a time.
If another handset is
screening the call,
you'll just hear a beep
when you try to screen
the call, too.
www.uniden.com
You can record a phone conversation with your handset or base. The conversation
has to last more than two seconds and less than ten minutes. During a
conversation, press menu/select (for base, then press the OPTIONS soft key). Use
up/down key to select % CN N4 G EQ T F . The handset or the base sounds a confirmation
tone that can be heard by both parties and displays 4G E QT F KP I C E C NN . When you
want to stop recording, press menu/select and select Call Record again.
Screening Calls
You can screen calls from the base: just let the answering machine answer the call
and listen to the caller leave a message. Answer the phone if you want to talk to
the caller. To mute the call screen, press .
If you turn on the call screen feature (see page 75), you can also screen calls from
the handset. Let the answering machine answer the call, then press the volume up
key. If you want to talk to the caller, just press talk/flash, and the answering
machine will stop recording. To mute the call screen, press end.
An s we r in g M a c hi ne [ 8 0 ]
Answering Machine
Recording a phone conversation
UP744.book Page 81 Friday, November 5, 2004 4:22 PM
Answering Machine
Do Not Disturb (DND)
The do not disturb feature (DND) allows you to mute the ringer, the base, and any
registered handsets at the same time. The phone must be in standby mode. Press
and hold dnd on the base. You will hear a confirmation tone, and the dnd LED
illuminates. To cancel the DND feature, press dnd again. You can also mute the
ringer tone while the phone is ringing by pressing dnd on the base.
Activating the DND while the answering system is off will turn the answering
system on automatically. The answering system setting will reset to the original
setting when you cancel the DND.
Recording a voice memo
The voice memo function allows the user to record messages (more than 2 seconds
and less than 4 minutes). To record your own greeting, make sure the phone is in
standby mode. Press menu/select on the base. Select 4G E QT F / G OQ and press menu/
select. Press the START soft key. After the answering machine says, "Record
greeting," you can start recording. When you're finished, press the STOP soft key.
The answering machine will play back your greeting so you can hear it.
You can also record a voice memo remotely, select , and then AnsMachine. The
display tells you how many new and old messages you have.
Press
/7. After the answering machine says, 4 G EQ T F IT G GV K PI , you can start
recording. When you're finished, press
/7 key.
[ 8 1 ] A n s we r in g M a c hi ne
www.uniden.com
UP744.book Page 82 Friday, November 5, 2004 4:22 PM
note
•The system will only
play back messages for
four minutes and then
it returns to the
command waiting
mode.
•To continue playing
your messages, press 0
then 2 again within 15
seconds.
•If you enter an
incorrect security code
three times, you will
hear a beep and the
system will return to
standby.
You can check, play, or delete messages when you are away from home. You can also
record, select, or delete your own greeting message. To access your answering
machine remotely, you need a touch tone telephone and a two-digit security code
(see Setting a Security Code on page 73).
1) Call your telephone number and wait for the system to answer. If Toll Saver is
enabled, answering machine will answer in 2 rings if you have new messages and
4 rings if you don't. If the answering machine is off, it will answer after about 10
rings and sound a series of beeps.
2) During the greeting message (or a series of beeps when the answering machine is
off), press 0 and enter your security code within two seconds.
3) The answering machine announces the current time and the number of messages
stored in memory. You hear "To play incoming messages, press zero-two. For
help, press one-zero." Then, you'll hear a beep.
4) Enter a command from the following chart within 15 seconds. After the first
command, you have two seconds to enter each command.
•For your convenience,
a remote operation
card is provided for
you to use while away
from home (refer to
page 102).
www.uniden.com
An s we r in g M a c hi ne [ 8 2 ]
Answering Machine
Remote Operation
UP744.book Page 83 Friday, November 5, 2004 4:22 PM
Function
0 then 1 Repeat a Message*
0 then 2 Play incoming Messages
0 then 3 Skip a Message
Command
Function
0 then 6 answering machine On
0 then 7 Memo Record/Stop**
Greeting Message Record/
0 then 8 Stop**
0 then 4 Delete a Message
0 then 9 answering machine Off
0 then 5 Stop Operation
1 then 0 Help
* For the Repeat a Message function, press 0 then 1 within about 2 seconds to
repeat the previous message, or press 0 then 1 after about 2 seconds to repeat
the current message.
** The first time you enter the Memo Record or the Greeting Message Record
command, the answering machine will start recording. Enter the same command
again to stop recording.
5) After the command has finished, you hear intermittent beeps indicating that the
system is in the command waiting mode. You can enter another command from
the chart, or you can hang up to exit the system.
6) When you hang up, the answering machine automatically returns to standby.
[ 8 3 ] A n s we r in g M a c hi ne
www.uniden.com
Answering Machine
Command
UP744.book Page 84 Friday, November 5, 2004 4:22 PM
Multi-Handset Features
note
•If the party is out of
range, 0Q5KIPCN
appears in the display,
and the operation will
be canceled.
Using DirectLink Mode
In DirectLink Mode, a pair of handsets
can function as two-way radios.
DirectLink Mode does not interfere with
the main base's ability to make or receive
telephone calls. You must set both
handsets to DirectLink Mode to make a
directlink call.
To enter DirectLink mode, Select Direct
Link option in the main menu. And then press the ENTER soft
key. Direct Link Mode Complete appears when you enter the
DirectLink Mode mode.
&KTGEV.KPM
5'.'%6
To make a DirectLink call, press the DirectLink soft key. Select the handset you
want to call. To cancel the call, Press end. To answer a DirectLink call, Press talk/
flash. Press end when you want to hang up.
www.uniden.com
M u lt i - Ha nd s et F e at u r es [ 8 4 ]
M u l t i -H a n d s et Fe at u r e s
•While a pair of
handsets are in
DirectLink Monitor
mode, they cannot be
used to make or
receive calls. Other
handsets can still make
and receive calls.
The features in this section require a minimum of two handsets to operate. To add
additional handsets to your system, see "Expanding Your Phone" on page 13.
UP744.book Page 85 Friday, November 5, 2004 4:22 PM
Room/Baby Monitor
This feature allows you to monitor sounds
in another room. Place a handset or the
base in the room you wish to monitor; it
will function as a microphone. A second
handset or the base can be used as a
remote speaker, allowing you to monitor
sounds in the room.
•This feature only works
when both handsets
are within the range of
the base.
•If the party is out of
range, 0Q5KIPCN
appears in the display,
and the operation will
be canceled.
Using Room/Baby Monitor
To enter Room Monitor mode, press
menu/select. Then select the Room
Monitor. Select the handset or base you
want to monitor. Press end or end/find
HS when you want to stop monitoring.
To prevent the monitoring of a particular
handset or the base, simply turn off the
Room Monitor feature on that handset or
on the base.
To turn off the Room Monitor, go to
System Setup, Base/Handset Setup Menu,
and then "Room Monitor."
Select 1 P . You will hear a confirmation
tone.
[ 8 5 ] M ult i - Ha nd s e t F e at u r es
note
4QQO/QPKVQT
•While a pair of
handsets are in Room/
Baby Monitor mode,
they cannot be used to
make or receive calls.
Other handsets can
still make and receive
calls.
5'.'%6
www.uniden.com
M u l t i - H a n d s e t Fe a t u r e s
To exit DirectLink mode and be able to receive normal phone calls again, press the
CANCEL soft key, and then press the OK soft key.
UP744.book Page 86 Friday, November 5, 2004 4:22 PM
Intercom
note
•If you receive an
outside/intercom call
or page while selecting
the other handset, the
operation is canceled.
•During an intercom
call, if you receive a
call, you will hear a
ringer tone from the
ear speaker.
•If all handsets are
paged, only the first
party to answer the
page will connect.
•If you do not select a
handset within ten
seconds, the operation
will be canceled.
+PVGTEQO
*CPFUGV
*CPFUGV
*CPFUGV
$CUG
#NN
.#0&
Answering an intercom page
When the handset receives an intercom page, it sounds a tone and shows the ID of
the handset that is paging. To answer the page, pick up the handset and press talk/
flash, speaker, or back/hold/intercom on the handset,
or back/hold/intercom
on the base.
To hang up an intercom page, press end on either handset.
Transferring a Call
You can transfer a call from one handset or the base to another.
During a call, press back/hold/intercom; this will put the call
on hold. Select the handset or base you want to page. If you
select #N N , all other handsets and base will be paged. To cancel
the page and go back to the caller, press talk /flash or
on
the base.
*QNF6TCPUHGT
*CPFUGV
*CPFUGV
*CPFUGV
$CUG
#NN
.#0&
www.uniden.com
/1$+.'
/1$+.'
M u lt i - Ha nd s et F e at u r es [ 8 6 ]
M u l t i -H a n d s et Fe at u r e s
•If the party does not
answer within one
minute, the operation
is canceled.
You can use the intercom to talk to another handset without
using the phone line. While the phone is in standby mode, press
back/hold/intercom. Select the handset or base you want to
page. If you select #N N , all other handsets will be paged.
If the handset or base you're trying to page is busy, the phone
displays 5[ UV G OD WU [. If the handset you're trying to page is out
of range, the phone displays 0Q  5K IP C N . The page is canceled.
UP744.book Page 87 Friday, November 5, 2004 4:22 PM
[ 8 7 ] M ult i - Ha nd s e t F e at u r es
www.uniden.com
M u l t i - H a n d s e t Fe a t u r e s
Answering a transfer page
When the handset receives a transfer page, it sounds a tone and shows the ID of the
handset that is paging. Pick up the handset and press talk/flash or
or back/
hold/intercom to answer the page. If you want to accept the transfer and talk to
the outside caller, press talk/flash or back/hold/intercom on the handset, or
or
back/hold/intercom on the base.
UP744.book Page 88 Friday, November 5, 2004 4:22 PM
Note on Power Sources
note
Power Failure
The phone use the backup battery in the Base. It provides power backup in the
event of a power failure or outage. You will be able to make or receive calls with the
telephone.
•A replacement Uniden
adapter or battery may
be purchased by
calling the Customer
Hotline at 1-800-2971023 (Mon - Fri 7 am
to 7 pm, Sat/Sun/
holidays--except
Thanskgiving and
Christmas--9 am to 5
pm, CST).
•Use only the Uniden
(BT-0002 and BT446)
rechargeable battery
pack supplied with
your cordless phone.
When the operating time becomes short, even after the battery is recharged, please
replace the battery. With normal usage, your battery should last about one year.
Warning
To avoid the risk of personal injury or property damage from fire or electrical shock,
use only Uniden AD-0009 AC adapters and Uniden BT-0002 battery back with your
phone.
Caution
•
•
•
•
Use only the specified Uniden battery pack (BT-0002 and BT-446).
Do not remove the batteries from the handset to charge them.
Never throw the battery into a fire, disassemble them, or heat them.
Do not remove or damage the battery casing.
N o t e o n P ow e r S o u rc es [ 8 8 ]
N o te o n Po w er S o ur c es
www.uniden.com
Battery replacement and handling
UP744.book Page 89 Friday, November 5, 2004 4:22 PM
G e ner al I nf o r m a ti o n
General Information
The phone complies with FCC Parts 15 and 68. Operating temperature:
0 °C to +50 °C (+32 °F to +122 °F)
AC Adapter Information
AC Adapter part number: AD-0009
Input Voltage: 120V AC 60Hz
Output Voltage: 9V DC 600mA
Battery Information
Battery part number: BT-0002 (Handset) BT-446 (Base)
Capacity: 980mAh, 3.7V
800mAh, 3.6V
Specifications, features, and availability of optional accessories are all subject to
change without prior notice.
[ 8 9 ] G e ne r al I nf o r ma t i o n
www.uniden.com
UP744.book Page 90 Friday, November 5, 2004 4:22 PM
If your phone is not performing to your expectations, please try these simple steps first. If these steps
do not solve your problem, please call our Customer Hotline at 1-800-297-1023 (Mon - Fri 7 am to 7 pm,
Sat/Sun/holidays [except U.S. Thanksgiving and Christmas] 9 am to 5 pm, CST).
Symptom
Suggestion
• Make sure the AC adapter is plugged into the base or the charger (if you have more than one handset)
The charge LED won't
and wall outlet.
illuminate when the handset is
• Make sure the handset is properly seated in the cradle.
placed in the cradle.
• Make sure the charging contacts on the handset are clean.
The audio sounds weak.
• Move the handset and/or base away from metal objects or appliances and try again.
• Make sure that you are not too far from the base.
Can't make or receive calls.
• Make sure that you are not too far from the base.
• Make sure the line is not in use. If an out call is already using a line, you cannot use that line to make
another outside call.
• Check both ends of the base telephone line cord.
• Make sure the AC adapter is plugged into the base and wall outlet.
• Disconnect the AC adapter and the backup battery.
• Change the Digital Security Code (see page 16).
The handset doesn't ring or
receive a page.
• Make sure that you are not too far from the base.
• Charge the batteries in the handset for 10 hours by placing the handset on the base or charging
cradle.
• Change the Digital Security Code (see page 16).
Severe noise interference.
• Keep the handset away from microwave ovens, computers, remote control toys, wireless microphones,
alarm systems, intercoms, room monitors, fluorescent lights, and electrical appliances.
• Move to another location or turn off the source of interference.
www.uniden.com
Tr o ub l e s h oo t i n g [ 9 0 ]
Tr o u b l e s h o o t i n g
Troubleshooting
UP744.book Page 91 Friday, November 5, 2004 4:22 PM
Symptom
Suggestion
• The call was placed through a switchboard.
The Caller ID does not display. • Call your local telephone company to verify your Caller ID service is current. There may be a problem
with your Caller ID service.
You cannot register the
handset at the base.
• Charge the battery pack for 15-20 hours.
• Change the Digital Security Code (see page 16).
The handset doesn't
communicate with other
handsets.
• Change the Digital Security Code (see page 16).
• Make sure that you have registered all handsets.
An extra handset can't join the • Make sure there are not 2 handsets already using the conference feature.
conversation.
• Make sure that another handset is not in privacy mode.
Room Monitor feature does not
• Make sure to place the handset(s) within the range of the base.
work.
The answering machine does
not work.
•Make sure the base unit is plugged in.
•Make sure that the answering machine is turned on.
•Make sure that the message record time is not set to Announce only
(see page 74).
Messages are incomplete.
•The incoming messages may be too long. Remind callers to leave a brief message.
•The memory maybe full. Delete some or all of the saved message.
No sound on the base unit or
handset speaker during call
monitoring or message
playback.
•Adjust the speaker volume on the base unit or handset.
•Make sure the call screen feature is set to on.
[91] Troubleshooting
www.uniden.com
UP744.book Page 92 Friday, November 5, 2004 4:22 PM
Suggestion
Cannot access remote call-in
features from another
touchtone phone.
•Make sure you are using the correct PIN number.
•Make sure that the touch-tone phone you're using can transmit the tone for at least two seconds. If it
cannot, you may have to use another phone to access your phone.
Time stamp cannot be heard.
•Make sure you have set the time (see "Setting Day and Time" on page 29).
System Reset
De-register the Handset
1) Press and hold end and # for more than 5 seconds. Select &G T GI KU V GT  *5 .
2) The phone will ask you to confirm the deregistration. Select ; GU .
5[UVGO4GUGV
>GIKUVGT*5
4GRNCEKPI$CUG
5'.'%6
Replacing the Base Setting
1) Press and hold end and # for more than 5 seconds. Select Replacing Base.
$ C UG appears.
2) Select ; GU .
3) You will hear a confirmation tone. The base information will be deleted.
4 G RN C EK PI 
5[UVGO4GUGV
>GIKUVGT*5
4GRNCEKPI$CUG
5'.'%6
www.uniden.com
Tr o ub l e s h oo t i n g [ 9 2 ]
Tr o u b l e s h o o t i n g
Symptom
UP744.book Page 93 Friday, November 5, 2004 4:22 PM
When the base information is deleted, the handset displays
/ 7 56 RN CE G V J GJ CP F UG V K P 
D C UG V QTG IK U VG T / Q FG N UO C [X C T[  TG H GT V QQ Y PG T U O CP W CN H QT I WK F CP EG .
the handset to the base (see page 14).
Re-register
4GRNCEKPIDCUG
;GU
0Q
5'.'%6
[93] Troubleshooting
www.uniden.com
UP744.book Page 94 Friday, November 5, 2004 4:22 PM
Liquid Damage
Moisture and liquid can damage your cordless phone. Follow the steps below if your phone gets wet:
Case
If the handset or base is exposed to moisture or
liquid, but only the exterior plastic housing is
affected.
If moisture or liquid has entered the plastic-housing
(i.e. liquid can be heard in the phone or liquid has
entered the handset battery compartment or vent
openings on the base).
Wipe off the liquid, and use as normal.
Handset:
1) Remove the battery cover and leave it off for ventilation.
2) Disconnect the battery pack. Leave the battery cover off and the battery pack
disconnected for at least 3 days.
3) Once the handset is completely dry, reconnect the battery pack and the battery
cover.
4) Recharge the handset's battery pack for 20 hours before using.
Base:
1) Disconnect the AC adapter from the base, cutting off electrical power.
2) Disconnect the telephone cord from the base.
3) Let dry for at least 3 days.
IMPORTANT: You must unplug the telephone line while recharging the battery
packs to avoid charge interruption.
CAUTION: DO NOT use a microwave oven to speed up the drying process. This will
cause permanent damage to the handset, base and the microwave oven.
After following these steps, if your cordless telephone does not work, please call
our Customer Service Hotline at 1-800-297-1023.
L iq u id D am a ge [ 9 4 ]
L iq u i d D a ma g e
www.uniden.com
Action
UP744.book Page 95 Friday, November 5, 2004 4:22 PM
Precautions!
Before you read anything else, please observe the following:
Warning!
Uniden America Corporation DOES NOT represent this unit to be
waterproof. To reduce the risk of fire, electrical shock, or damage to the
unit, DO NOT expose this unit to rain or moisture.
Rechargeable Lithium Ion and Nickel-MetalHydride Battery Warning
• This equipment contains rechargeable Lithium Ion Nickel-MetalHydride battery.
• The rechargeable batteries contained in this equipment may explode
if disposed of in a fire.
• Nickel is a chemical known to state of California to cause cancer.
• Do not short-circuit the battery.
• Do not charge the rechargeable battery used in this equipment in any
charger other than the one designed to charge this battery as
specified in the owner's manual. Using another charger may damage
the battery or cause the battery to explode.
Rechargeable Batteries Must Be Recycled or
Disposed of Properly
The exclamation point within an equilateral
is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Uniden works to reduce lead content in our PVC coated cords in our
products and accessories.
Important Safety Instructions
When using your telephone equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and injury
to persons, including the following:
1. Do not use this product near water, for example, near a bath tub,
wash bowl, kitchen sink or laundry tub, in a wet basement or near a
swimming pool.
2. Avoid using a telephone (other than a cordless type) during an
electrical storm. There may be a remote risk of electric shock from
lightning.
Please follow instructions for repairing, if any (e.g. battery
replacement section); otherwise do not substitute or repair any parts
of the device except as specified in this manual.
Connection to party line service is subject to state tariffs. Contact the
state public utility commission, public service commission or
corporation commission for information.
This equipment is hearing aid compatible.
SAVE THESE INSTRUCTIONS
Should you experience trouble with this equipment, please contact
Uniden customer service at 800-297-1023. If the equipment is causing
harm to the telephone network, the telephone company may request
that you disconnect the equipment until the problem is resolved.
NOTICE: According to telephone company reports, AC electrical surges,
typically resulting from lightning strikes, are very destructive to
telephone equipment connected to AC power sources. To minimize
damage from these types of surges, a surge arrestor is recommended.
Changes or modifications to this product not expressly approved by
Uniden, or operation of this product in any way other than as detailed
by the owner's manual, could void your authority to operate this
product.
CAUTION
Risk of explosion if battery is replaced by an incorrect type. Dispose of
used batteries according to the instructions. Do not open or mutilate
the battery, and disconnect the battery before shipping this product.
The FCC Wants You To Know
This equipment complies with Part 68 of the FCC rules and the
requirements adopted by the ACTA. On the bottom of this equipment is
a label that contains, among other information, a product identifier in
the format US:AAAEQ##TXXXX. If requested, this number must be
provided to the telephone company.
An applicable Universal Service Order Codes (USOC) certification for the
jacks used in this equipment is provided (i.e., RJ11C) in the packaging
with each piece of approved terminal equipment.
A plug and jack used to connect this equipment to the premises wiring
and telephone network must comply with the applicable FCC Part 68
rules and requirements adopted by the ACTA. A compliant telephone
cord and modular plug is provided with this product. It is designed to
be connected to a compatible modular jack that is also compliant. See
installation instructions for details.
The REN is used to determine the number of devices that may be
connected to a telephone line. Excessive RENs on a telephone line may
result in the devices not ringing in response to an incoming call. In
most but not all areas, the sum of RENs should not exceed five (5.0).
To be certain of the number of devices that may be connected to a line,
as determined by the total RENs, contact the local telephone company.
For products approved after July 23, 2001, the REN for this product is
part of the product identifier that has the format US:AAAEQ##TXXXX.
The digits represented by ## are the REN without a decimal point (e.g.,
03 is a REN of 0.3). For earlier products, the REN is separately shown
on the label.
If this equipment causes harm to the telephone network, the telephone
company will notify you in advance that temporary discontinuance of
service may be required. But if advance notice isn't practical, the
telephone company will notify the customer as soon as possible. Also,
you will be advised of your right to file a complaint with the FCC if you
believe it is necessary.
The telephone company may make changes in its facilities, equipment,
operations or procedures that could affect the operation of the
equipment. If this happens the telephone company will provide
advance notice in order for you to make necessary modifications to
maintain uninterrupted service.
[95] Precautions & Warranty
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
Privacy of communications, may not be ensured when using this phone.
To insure the safety of users, the FCC has established criteria for the
amount of radio frequency energy various products may produce
depending on their intended usage. This product has been tested and
found to comply with the FCC’s exposure criteria. For body worn
operation, the FCC RF exposure guidelines were also met when used
with the Uniden accessories supplied or designed for this product. Use
of other accessories may not ensure compliance with FCC RF exposure
guidelines and should be avoided.
Radio Interference
Radio interference may occasionally cause buzzing and humming in
your cordless handset, or clicking noises in the base. This interference
is caused by external sources such as TV, refrigerator, vacuum cleaner,
fluorescent lighting, or electrical storm. Your unit is NOT DEFECTIVE. If
these noises continue and are too distracting, please check around
your home to see what appliances may be causing the problem. In
addition, we recommend that the base not be plugged into a circuit
that also powers a major appliance because of the potential for
interference. Be certain that the antenna on the unit is fully extended
when needed.
In the unlikely event that you consistently hear other voices or
distracting transmissions on your phone, you may be receiving radio
signals from another cordless telephone or other source of interference.
If you cannot eliminate this type of interference, you need to change
to a different channel.
www.uniden.com
Precautions &
Warning!
The cords on this product and/or accessories contain lead, a chemical
known to the State of California to cause birth defects or other
reproductive harm. Wash hands after handling.
3. Do not use the telephone to report a gas leak in the vicinity of the
leak.
4. Use only the power cord and batteries indicated in this manual. Do
not dispose of batteries in a fire. They may explode. Check with
local codes for possible battery disposal instructions.
5. Do not disassemble any component of this product.
UP744.book Page 96 Friday, November 5, 2004 4:22 PM
Finally, it should be noted that some cordless telephones operate at
frequencies that may cause interference to nearby TVs and VCRs. To
minimize or prevent such interference, the base of the cordless
telephone should not be placed near or on top of a TV or VCR. If
interference is experienced, moving the cordless telephone farther
away from the TV or VCR will often reduce or eliminate the interference.
Cordless Telephone Privacy
Cordless telephones are radio devices. Communications between the
handset and base of your cordless telephone are accomplished by
means of radio waves which are broadcast over the open airways.
Because of the inherent physical properties of radio waves, your
communications can be received by radio receiving devices other than
your own cordless telephone unit. Consequently, any communications
using your cordless telephone may not be private.
One Year Limited Warranty
Important: Evidence of original purchase is required for warranty
service.
WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden") ELEMENTS OF
WARRANTY: Uniden warrants, for one year, to the original retail owner,
this Uniden Product to be free from defects in materials and
craftsmanship with only the limitations or exclusions set out below.
LEGAL REMEDIES: This warranty gives you specific legal rights, and you
may also have other rights which vary from state to state. This
warranty is void outside the United States of America and Canada.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after
following the instructions in the owner's manual you are certain that
the Product is defective, pack the Product carefully (preferably in its
original packaging). Disconnect the battery from the Product and
separately secure the battery in its own separate packaging within the
shipping carton. The Product should include all parts and accessories
originally packaged with the Product. Include evidence of original
purchase and a note describing the defect that has caused you to
return it. The Product should be shipped freight prepaid, by traceable
means, to warrantor at:
Uniden America Corporation
Parts and Service Division
4700 Amon Carter Blvd.
Fort Worth, TX 76155
(800) 297-1023, 7:00 a.m. to 7:00 p.m. Monday through Friday; 9:00
a.m. through 5:00 p.m., Saturday, Sunday and Holidays (except
Thanksgiving and Christmas); all Central Time,
www.uniden.com
Precautions & Warranty [96]
P r ec au ti o ns & War r an ty
WARRANTY DURATION: This warranty to the original user shall
terminate and be of no further effect 12 months after the date of
original retail sale. The warranty is invalid if the Product is (A)
damaged or not maintained as reasonable or necessary, (B) modified,
altered, or used as part of any conversion kits, subassemblies, or any
configurations not sold by Uniden, (C) improperly installed, (D)
serviced or repaired by someone other than an authorized Uniden
service center for a defect or malfunction covered by this warranty, (E)
used in any conjunction with equipment or parts or as part of any
system not manufactured by Uniden, or (F) installed or programmed by
anyone other than as detailed by the owner's manual for this product.
STATEMENT OF REMEDY: In the event that the product does not conform
to this warranty at any time while this warranty is in effect, warrantor
will either, at its option, repair or replace the defective unit and return
it to you without charge for parts, service, or any other cost (except
shipping and handling) incurred by warrantor or its representatives in
connection with the performance of this warranty. Warrantor, at its
option, may replace the unit with a new or refurbished unit. THE
LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE
WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND
EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER,
WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW,
INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS
WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR
PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do
not allow this exclusion or limitation of incidental or consequential
damages so the above limitation or exclusion may not apply to you.
UP744.book Page 97 Friday, November 5, 2004 4:22 PM
I.C. Notice
TERMINAL EQUIPMENT
NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications.
This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies
that registration was performed based on a Declaration of Conformity indicating that Industry Canada
technical specifications were met. It does not imply that Industry Canada approved the equipment.
NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipment itself. The
REN assigned to each terminal equipment provides an indication of the maximum number of terminals
allowed to be connected to a telephone interface. The termination on an interface may consist of any
combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of
all the devices does not exceed five.
RADIO EQUIPMENT
The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were
met.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the device. "Privacy of
communications may not be ensured when using this telephone".
[97] I.C. Notice
www.uniden.com
UP744.book Page 98 Friday, November 5, 2004 4:22 PM
Index
Animations. . . . . . . . . . . . . . . . . 38
Answering Machine
Answering Mode. . . . . . . . . . . . 72
Call screen . . . . . . . . . . . . . . . 75
Message alert . . . . . . . . . . . . . 75
Security code . . . . . . . . . . . . . 73
Setting up menu . . . . . . . . . . . 73
Anykey Answer . . . . . . . . . . . . . . 27
Area Code . . . . . . . . . . . . . . . . . 30
Audio Tone . . . . . . . . . . . . . . . . . 58
Backlight Color . . . . . . . . . . . . . . 37
Battery
Replacement . . . . . . . . . . . . . . . 9
Calendar . . . . . . . . . . . . . . . . . . 61
Call screen . . . . . . . . . . . . . . . . . 75
Call transfer feature . . . . . . . . . . . 86
Caller ID
Call Waiting . . . . . . . . . . . . . . 51
CIDCW . . . . . . . . . . . . . . . . . . 70
CWDX . . . . . . . . . . . . . . . . . . . 51
Conference . . . . . . . . . . . . . . . . . 52
Customize Handset . . . . . . . . . . . 31
Date & time . . . . . . . . . . . . . . . . 29
Delete ringer . . . . . . . . . . . . . . . 36
De-register the Handset . . . . . . . . 92
Dial mode . . . . . . . . . . . . . . . . . 31
www.uniden.com
Digital security code . . . . . . . . . . 16
DirectLink. . . . . . . . . . . . . . . . . . 84
Distinctive ID . . . . . . . . . . . . . . . 33
Earpiece volume. . . . . . . . . . . . . . 56
Expanding your phone . . . . . . . . . 13
Find handset . . . . . . . . . . . . . . . . 60
General information . . . . . . . . . . . 89
Global set . . . . . . . . . . . . . . . . . . 29
Handset setup . . . . . . . . . . . . . . . 25
Hands-free conversation . . . . . . . . 48
Hanging up . . . . . . . . . . . . . . . . . 50
Headset installation . . . . . . . . . . . 17
Hold . . . . . . . . . . . . . . . . . . . . . 52
Holster. . . . . . . . . . . . . . . . . . . . 16
I.C. notice . . . . . . . . . . . . . . . . . 97
Important safety instructions. . . . . 95
Intercom . . . . . . . . . . . . . . . . . . 86
Key touch tone . . . . . . . . . . . . . . 27
Language . . . . . . . . . . . . .26, 38, 75
LCD contrast . . . . . . . . . . . . . . . . 26
Link handsets . . . . . . . . . . . . 84, 85
Liquid damage . . . . . . . . . . . . . . . 94
Low battery . . . . . . . . . . . . . . . . 10
Making a call . . . . . . . . . . . . . . . .47
Message Alert. . . . . . . . . . . . . . . .75
Mute
Handset ringer . . . . . . . . . . . . .59
Microphone . . . . . . . . . . . . . . .59
Out going greeting . . . . . . . . . . . .76
Choosing . . . . . . . . . . . . . . . . .76
Recording. . . . . . . . . . . . . . . . .76
Out of range . . . . . . . . . . . . . . . .50
Phonebook
Capacity. . . . . . . . . . . . . . . . . .67
Copying entries . . . . . . . . . . . . .66
Group . . . . . . . . . . . . . . . . . . .65
Making calls . . . . . . . . . . . . . . .68
Name. . . . . . . . . . . . . . . . . . . .64
Number . . . . . . . . . . . . . . . . . .64
Sort order. . . . . . . . . . . . . . . . .68
Speed dial . . . . . . . . . . . . . . . .65
Unique display . . . . . . . . . . . . .65
Unique ring . . . . . . . . . . . . . . .64
Power failure . . . . . . . . . . . . . . . .88
Precautions . . . . . . . . . . . . . . . . .95
Privacy mode . . . . . . . . . . . . . . . .26
Receiving a call . . . . . . . . . . . . . .49
Record ringer . . . . . . . . . . . . . . . .34
Record Time. . . . . . . . . . . . . . . . .74
Recording conversation . . . . . . . . .80
Redialing a call . . . . . . . . . . . . . .55
INDEX
[98]
UP744.book Page 99 Friday, November 5, 2004 4:22 PM
Register the handset . . . . . . . . . .
Reminder . . . . . . . . . . . . . . . . . .
Remote operation . . . . . . . . . . . .
Reviewing message . . . . . . . . . . .
Ring options. . . . . . . . . . . . . . . .
Ring time. . . . . . . . . . . . . . . . . .
Ringer tone . . . . . . . . . . . . . . . .
Ringer volume
Base . . . . . . . . . . . . . . . . . . .
Handset . . . . . . . . . . . . . . . . .
Room/baby monitor. . . . . . . . . . .
Setting up
Answering Machine. . . . . . . . . .
base unit . . . . . . . . . . . . . . . .
Telephone Line . . . . . . . . . . . .
Soft Key. . . . . . . . . . . . . . . . . . .
Speaker phone . . . . . . . . . . . . . .
Speaker volume
Base . . . . . . . . . . . . . . . . . . .
Handset . . . . . . . . . . . . . . . . .
Storing a caller ID or redial number
System Setup . . . . . . . . . . . . . . .
Tone dial . . . . . . . . . . . . . . . . . .
Transferring a call . . . . . . . . . . . .
Troubleshooting . . . . . . . . . . . . .
Warranty . . . . . . . . . . . . . . . . . .
[99] INDEX
14
61
82
78
32
74
32
56
57
85
73
11
11
21
48
56
58
66
25
59
86
90
96
www.uniden.com
UP744.book Page 100 Friday, November 5, 2004 4:22 PM
Memo
www.uniden.com
[100]
UP744.book Page 101 Friday, November 5, 2004 4:22 PM
Memo
[101]
www.uniden.com
UP744.book Page 102 Friday, November 5, 2004 4:22 PM
CUT
CUT
REMOTEOPERATIONCARD
REMOTEOPERATIONCARD
Remote access away from
home
Turn on the answering
system remotely
Remote access away from
home
Turn on the answering
system remotely
1. Call your phone number from a
touch-tone phone.
2. During the outgoing message,
press 0 and enter your PIN code.
The answering system announces
the number of messages stored in
memory and the voice prompts.
3. To quit, hang up the phone.
1. Call your phone and let it ring
10 times until you hear a beep.
2. Press 0 and then enter your
PIN code.
3. Press 0 then 5 to stop
the announcement.
4. Press 0 then 6 to turn the
answering system on.
1. Call your phone number from a
touch-tone phone.
2. During the outgoing message,
press 0 and enter your PIN code.
The answering system announces
the number of messages stored in
memory and the voice prompts.
3. To quit, hang up the phone.
1. Call your phone and let it ring
10 times until you hear a beep.
2. Press 0 and then enter your
PIN code.
3. Press 0 then 5 to stop
the announcement.
4. Press 0 then 6 to turn the
answering system on.
CUT
CUT
REMOTEOPERATIONCARD
REMOTEOPERATIONCARD
Remote access away from
home
Turn on the answering
system remotely
Remote access away from
home
Turn on the answering
system remotely
1. Call your phone number from a
touch-tone phone.
2. During the outgoing message,
press 0 and enter your PIN code.
The answering system announces
the number of messages stored in
memory and the voice prompts.
3. To quit, hang up the phone.
1. Call your phone and let it ring
10 times until you hear a beep.
2. Press 0 and then enter your
PIN code.
3. Press 0 then 5 to stop
the announcement.
4. Press 0 then 6 to turn the
answering system on.
1. Call your phone number from a
touch-tone phone.
2. During the outgoing message,
press 0 and enter your PIN code.
The answering system announces
the number of messages stored in
memory and the voice prompts.
3. To quit, hang up the phone.
1. Call your phone and let it ring
10 times until you hear a beep.
2. Press 0 and then enter your
PIN code.
3. Press 0 then 5 to stop
the announcement.
4. Press 0 then 6 to turn the
answering system on.
www.uniden.com
R em o t e O pe ra t i on C ar d [ 1 0 2 ]
R em o te Op er a t io n C a r d
Remote Operation Card
UP744.book Page 103 Friday, November 5, 2004 4:22 PM
CUT
Task
Repeat a Message
Playing incoming Messages
Skipping a Message
Deleting a Message
Stop Operation
Answering System On
Memo Record/Stop
Greeting Message Record/Stop
Answer System Off
Help Guidance
CUT
Key
CUT
Task
Repeat a Message
Playing incoming Messages
Skipping a Message
Deleting a Message
Stop Operation
Answering System On
Memo Record/Stop
Greeting Message Record/Stop
Answer System Off
Help Guidance
[103] Remote Operation Card
Task
Repeat a Message
Playing incoming Messages
Skipping a Message
Deleting a Message
Stop Operation
Answering System On
Memo Record/Stop
Greeting Message Record/Stop
Answer System Off
Help Guidance
Key
CUT
Key
Task
Repeat a Message
Playing incoming Messages
Skipping a Message
Deleting a Message
Stop Operation
Answering System On
Memo Record/Stop
Greeting Message Record/Stop
Answer System Off
Help Guidance
Key
www.uniden.com
UP744.book Page 104 Friday, November 5, 2004 4:22 PM
At Uniden, we'll take care of you!
Thank you for purchasing a Uniden product. If you have any questions or problems,
please do not return this product to the place of purchase.
Having Trouble?
Our customer care specialists are here to help you! Call our Customer Hotline at 1-800-2971023 Mon - Fri 7 am to 7 pm, Sat/Sun/holidays (except U.S. Thanksgiving and Christmas).
9 am to 5 pm, CST, or visit our website at www.uniden.com.
Need a part?
To order headsets, additional handsets, replacement batteries or other accessories, call our
customer care specialists at the number listed above.
Mon - Fri 8 am to 5pm, CST or visit our website at www.uniden.com.
Help for our Special Needs Customers
If you need special assistance due to a disability or have questions on the accessibility
features of this product, please call 1-800-874-9314 (voice or TTY)
May be covered under one or more of the following U.S. patents:
4,523,058 4,595,795 4,797,916 5,381,460 5,426,690 5,434,905
5,491,745 5,493,605 5,533,010 5,574,727 5,581,598 5,650,790
5,660,269 5,661,780 5,663,981 5,671,248 5,696,471 5,717,312
5,732,355 5,754,407 5,758,289 5,768,345 5,787,356 5,794,152
5,801,466 5,825,161 5,864,619 5,893,034 5,912,968 5,915,227
5,929,598 5,930,720 5,960,358 5,987,330 6,044,281 6,070,082
6,125,277 6,253,088 6,314,278 6,418,209 6,618,015 6,671,315
6,714,630
R
IE
S,
FO OR E
CO
LI EN
ES
CC ON ID
A O
.U
R E G I S T E R O N L I N E T O D AY !
T H A N K Y O U F O R B U Y I N G A U N I D E N P R O D U C T.
©2004 Uniden America Corporation, Fort Worth, Texas. Contains additional foreign articles. Custom manufactured in China.
UPZZ01744BZ

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 53
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:2b7da83a-108d-48d5-9dae-0e69dba5774f
Producer                        : Acrobat Distiller 5.0 (Windows)
Create Date                     : 2004:11:08 00:53:19Z
Modify Date                     : 2004:12:01 13:19:36-05:00
Metadata Date                   : 2004:12:01 13:19:36-05:00
Document ID                     : uuid:8f25b1ef-f0cf-40a3-9069-86cc5f9442f8
Format                          : application/pdf

EXIF Metadata provided by EXIF.tools