Uniden America UU499 UPCS Handset DCX100 User Manual Manual r

Uniden America Corporation UPCS Handset DCX100 Manual r

Manual r

UU01499BZ_1 6/16/06 7:13 PM Page i
WelcomeCongratulations on your purchase of the Uniden DCX100accessory handset and charger. This expansion handset iscompatible with models in the following series: DECT1060,DECT1060-2, DECT1080, and DECT1080-2.You can place this fully featured cordless handset anywhere yourhome has AC power.Note: Illustrations in this manual are used for explanationpurposes. Some illustrations may differ from theactual unit.AccessibilityUniden provides a customer service hotline for accessibilityquestions. If you have a disability and need customer serviceassistance or if you have any questions about how Uniden’sproducts can accommodate persons with disabilities, please callthe accessibility voice/TTY line: 1-800-874-9314.A representative is available to talk to you M-F, 8:00 am to 5:00pm, CST. After hours, you can leave us a message, and we willcall you back. Information is also available on our website,www.uniden.com, under the “Accessibility” link.Important!The DCX100 accessory handset will not operate until it isregistered to a Uniden main base. This manual describes how toset up your new accessory handset; for more detailed instructionson operating your new handset, please refer to the manualsupplied with your base.Uniden®is a registered trademark of Uniden America Corporation.[1]UU01499BZ_1 6/16/06 7:13 PM Page 1
Terminology Used in this ManualChecking the Package ContentsMake sure your package contains the following items. If any itemsare missing or damaged, contact our Customer Service Hotline.See page 10 for contact information.• Cordless Handset• Charging Cradle• AC Adapter, model # AD-0005(Input: 120V AC 60 Hz / Output: 9V DC 210 mA)• Rechargeable NiMH Battery Pack, model # BT-1002(Capacity: 800 mAh, 2.4V)• Printed MaterialInstalling Your Accessory Handset Follow these steps to get your new handset ready to use.Step 1: Connect the Charger 1Connect the AC adapter (AD-0005) to theDC IN jack and to a standard 120V ACwall outlet. 2Set the charger on a desk or tabletop.[2]BaseChargerAccessoryHandsetStandbyTalkThe main part of the phone that connects to your phoneline and lets you make and receive calls.A cradle that charges an accessory handset. It connects topower but not to a phone line.A handset that works with an expandable phone base.Accessory handsets must be registered to a base.The handset is not in use. If it is off the cradle, no line hasbeen activated. No dial tone is present.A telephone line has been activated on the handsetenabling a dial tone.UU01499BZ_1 6/16/06 7:13 PM Page 2
•Use only the supplied AC adapter (AD-0005). Do notuse other AC adapters.• Place the charger close to the AC outlet so that you canunplug the AC adapter easily.Step 2: Install the Batteries and charge yournew handset for 15-20 hours1Remove the battery compartment cover. Press down on thesemi-circle indent and slide the cover off.2Charge the battery for 15-20 hours before using. To charge thebatteries, place the handset on the charger. While charging,the symbol scrolls. When the battery is fully charged and thephone is off the cradle, all the bars of the battery symbol willbe filled. If the symbol does not appear, reposition the handsetin the charger, ensuring that the charging points contact.NOTE: Once your handset is fully charged, your phone isdesigned for the charge LED to turn off for approximately4 seconds during the following instances:1) just after reaching a full charge2) 1 minute after reaching a full charge3) every 5 minutes after reaching a full chargeTo alleviate the charge LED from blinking on the chargerbase, you can simply remove the handset from thecharging cradle.You may also select to leave the handset in the cradlewhich will not damage the unit. Once fully charged, youmay notice the charge LED light will turn off for 4 secondsevery 5 minutes. This is normal operation and does notmean your unit is defective.[3]UU01499BZ_1 6/16/06 7:13 PM Page 3
• Use only the Uniden battery supplied with your phone. • Recharge your handset on a regular basis by returningthe handset to the charger after each phone call. Step 3: Register the Handset YOU NEED TO REGISTER THE DCX100 TO THE MAIN BASEBEFORE USE! For Main Base Models DECT1060/DECT1060-2/DECT1080/DECT1080-2. When you register a new handset to your base,you will be asked to enter the base PIN code. The pre-set PINcode is 0000. If you wish, you can change this code, see owner'smanual for detailed instruction. Before registering, make sure thatyou have the base and handset in front of you. Also, make sure allhandsets and the base are in standby mode. On the handset you want to register: 1Press to access the main menu. 2Press up or down key until “Add.Settings” is displayed andpress .Press or to display “Register” and press .Press or to select your base number and press . On your original base: Press and hold Find HS for approx. 3 seconds. You are now in‘registration mode’. If the base already has the maximum number of handsets (6)registered to it, you will need to de-register one of the existinghandsets before you can register the new handset. See the section on the next page for de-registering handsets. [4]UU01499BZ_1 6/16/06 7:13 PM Page 4
On the handset you want to register: Enter the base PIN code. Pre-set base PIN code is 0000.You will hear a confirmation tone when registration is complete.When in standby mode, the new handset number will bedisplayed. The handset will automatically be allocated with thenext available handset number.If registration is unsuccessful, the display will show Not Registeredand you will need to follow the registration procedure again.De-register a Handset or a BaseIf you have more than one handset registered to your base ormore than one base registered to your handset(s), you can de-register both the handset from the base or the base from thehandset. Before deregistering, make sure all handsets and thebase are in standby mode.1Press to access the main menu.2Press or until Add. Settingsis displayed and press .3Press or to display Deregisterand press .4Press or to select HandsetorBaseand press .5Press or to display the handset or base you want tode-register and press .6Press or to select Yesand press . If the handset has been registered to the base successfully,you will hear a confirmation tone.7Press to exit and return to standby.• You can register a handset to up to 4 bases, e.g. one atwork and one at home, and switch between them. [5]UU01499BZ_1 6/16/06 7:13 PM Page 5
Using Your Accessory Handset Now that your new handset is registered, it can perform all thesame functions as the handsets originally included with your phone.With your new handset, you can• Transfer calls between handsets • Use two handsets as 2-way radios in Walkie-Talkie mode • Hold conference calls • Access the integrated answering device or voice mail using ahandsetSee the owner's manual that came with your main base forcomplete instructions on operating your new expanded phone. Battery Information Low battery alert If the symbol is displayed on the handset, Charge Batteryappears and you hear the low battery tone, you will need torecharge your handset. We recommend that you place thehandset back on the charger in-between use to ensure that it isalways fully charged.Cleaning the battery charging contacts To maintain a good charge, clean the chargingcontacts on the handset once a month. Dampena cloth with plain water. Gently rub the dampcloth over the charging contacts until all visibledirt is removed. Dry the contacts thoroughlybefore returning the handset to the cradle. Caution: Do not use paint thinner, benzene, alcohol, or otherchemical products. Doing so may discolor the surface of thetelephone and damage the finish.[6]UU01499BZ_1 6/16/06 7:13 PM Page 6
[7]Quick GuideFunctionMake a callPre-dialing a call Adjust earpiece volumeEnd a call Receive a call RedialPrivacyStore phonebook numberDial phonebook number Button press, enter number. Enter number, . During a call, or . or place handset onbase/charger.Phone rings, . then or to display number,.During a call, and select Mute,repeat the same step to select “UnMute” to resume a call.then , select New Entry, ,enter name, , enter number, . SelectTone, , then select Save,.then or , . UU01499BZ_1 6/16/06 7:13 PM Page 7
[8]The FCC Wants You To KnowChanges or modifications to this product not expressly approved by Uniden, oroperation of this product in any way other than as detailed by the owner’s manual,could void your authority to operate this product.This device complies with part 15 of the FCC rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that maycause undesired operation. Privacy of communications may not be ensured whenusing this phone.To insure the safety of users, the FCC has established criteria for the amount of radiofrequency energy various products may produce depending on their intended usage.This product has been tested and found to comply with the FCC’s exposure criteria.For body worn operation, the FCC RF exposure guidelines were also met when usedwith the Uniden accessories supplied or designed for this product. Use of otheraccessories may not ensure compliance with FCC RF exposure guidelines andshould be avoided.Handset ringer melody Make internal callthen or toAudio Setting, .Press or to Ringer Typethen.Press or to select External,Internal,Paging,Alarm, orAppointment.Press or to select the melody,.then or to select internalhandset number, or .UU01499BZ_1 6/16/06 7:13 PM Page 8This handset and its antenna must not be co-located or operated in conjunction with any other antenna or transmitter.
[9]One Year Limited WarrantyImportant: Evidence of original purchase is required for warranty service.WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”) ELEMENTS OFWARRANTY: Uniden warrants, for one year, to the original retail owner, this UnidenProduct to be free from defects in materials and craftsmanship with only thelimitations or exclusions set out below.WARRANTY DURATION: This warranty to the original user shall terminate and be ofno further effect 12 months after the date of original retail sale. The warranty is invalidif the Product is (A) damaged or not maintained as reasonable or necessary, (B)modified, altered, or used as part of any conversion kits, subassemblies, or anyconfigurations not sold by Uniden, (C) improperly installed, (D) serviced or repairedby someone other than an authorized Uniden service center for a defect ormalfunction covered by this warranty, (E) used in any conjunction with equipment orparts or as part of any system not manufactured by Uniden, or (F) installed orprogrammed by anyone other than as detailed by the owner’s manual for thisproduct.STATEMENT OF REMEDY: In the event that the product does not conform to thiswarranty at any time while this warranty is in effect, warrantor will either, at its option,repair or replace the defective unit and return it to you without charge for parts,service, or any other cost (except shipping and handling) incurred by warrantor or itsrepresentatives in connection with the performance of this warranty. Warrantor, at itsoption, may replace the unit with a new or refurbished unit. THE LIMITEDWARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTYPERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALLOTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS,IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITEDTO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR APARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDEFOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL ORCONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or limitationof incidental or consequential damages so the above limitation or exclusion may notapply to you.LEGAL REMEDIES: This warranty gives you specific legal rights, and you may alsohave other rights which vary from state to state. This warranty is void outside theUnited States of America and Canada. PROCEDURE FOR OBTAININGPERFORMANCE OF WARRANTY: If, after following the instructions in the owner’smanual you are certain that the Product is defective, pack the Product carefully(preferably in its original packaging). Disconnect the battery from the Product andseparately secure the battery in its own separate packaging within the shippingcarton. The Product should include all parts and accessories originally packaged withthe Product. Include evidence of original purchase and a note describing the defectthat has caused you to return it. The Product should be shipped freight prepaid, bytraceable means, to warrantor at:Uniden America Service4700 Amon Carter Blvd.Fort Worth, TX 76155UU01499BZ_1 6/16/06 7:13 PM Page 9
[10]At Uniden, we’ll take care of you!Thank you for purchasing a Uniden product. if you have anyquestions or problems, please do not return this product to theplace of purchase.Havingtrouble?Need apart?Help for ourcustomerswith specialneedsOur customer care specialists are here to help you!Visit our website at www.uniden.com or call our CustomerService Hotline at 1-800-297-1023, Monday through Friday,7 AM to 7 PM or Saturday/Sunday, 9 AM to 5 PM, CST.The Customer Service Hotline is closed on holidays.To order headsets, additional handsets, replacementbatteries, or other accessories, visit our website atwww.uniden.com or call 1-800-554-3988, Monday throughFriday, 8 AM to 5 PM, CST.If you need special assistance due to a disability or havequestions on the accessibility features of this product,please call 1-800-874-9314 (voice or TTY).May be covered under one or more of the following U.S. patents:4,797,916 5,381,460 5,426,690 5,434,905 5,491,745 5,493,6055,533,010 5,574,727 5,581,598 5,650,790 5,660,269 5,661,7805,663,981 5,671,248 5,696,471 5,717,312 5,732,355 5,754,4075,758,289 5,768,345 5,787,356 5,794,152 5,801,466 5,825,1615,864,619 5,893,034 5,912,968 5,915,227 5,929,598 5,930,7205,960,358 5,987,330 6,044,281 6,070,082 6,125,277 6,253,0886,314,278 6,418,209 6,618,015 6,671,315 6,714,630 6,782,0986,788,920 6,788,953 6,839,550 6,889,184 6,901,271 6,907,0946,914,940 6,953,118Other patents pending.UU01499BZ_1 6/16/06 7:13 PM Page 10
UU01499BZ_1 6/16/06 7:13 PM Page 11

Navigation menu