Uniform 681 Contactless Card Reader User Manual UIC680SG Simple Manual

Uniform Industrial Corp. Contactless Card Reader UIC680SG Simple Manual

Manual

Download: Uniform 681 Contactless Card Reader User Manual UIC680SG Simple Manual
Mirror Download [FCC.gov]Uniform 681 Contactless Card Reader User Manual UIC680SG Simple Manual
Document ID1081357
Application ID/UWpGMgW+EvHXzCkMBmqNQ==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize5.78kB (72215 bits)
Date Submitted2009-03-17 00:00:00
Date Available2009-03-18 00:00:00
Creation Date2009-02-19 15:10:22
Producing SoftwareAcrobat Distiller 6.0 (Windows)
Document Lastmod2009-02-19 15:11:09
Document TitleUIC680SG Simple Manual
Document CreatorAcrobat PDFMaker 6.0 for Word
Document Author: Wilson W.

UIC681 Simple Manual
2009-2-19
UIC681 SERIES
Contactless Smart Card Reader Module
- RS232 & USB HID Keyboard Interface (Support M-Chip & qVSDC)
Thank you for purchasing the UIC681 series products.
The contactless smart card reader module UIC681 is mainly to support the contactless payment systems. The
small footprint size of the module makes it easily to integrate to the current transaction system such as
Point-of-Sale terminal, kiosk, and vending machine station as the part of the system. The module
communicates with a host computer or terminal using a standard RS-232, USB or TTL interface.
FEATURES
Small footprint PCB size: 99 L x 144 W x 28 D (mm) without antenna board
Supports ISO 14443 type A & B standard
Supports American Express® ExpressPay, MasterCard® PayPassTM, Visa® MSD applications
Reads/writes Philips Mifare® classical contactless smart card
Provides the options for the direct coupling antenna and the remote antenna
RS232, USB 2.0 Interface
RS232 data pass through function
F2F decoder data emulation (optional)
Firmware upgradeable
AGENCY APPROVAL
Pb
Specifications for FCC Class B, CE Class B
Changes or modifications are not expressly approved by the manufacturer could void the user's authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/ TV technician for help.
You are cautioned that any change or modifications to the equipment not expressly approve by the party responsible for
compliance could void your authority to operate such equipment.
SPECIFICATIONS
Communication
Standard RS232 signal level
Compatible with USB 2.0 specification
Power Requirements
5VDC
Power Consumption
330mA in idle mode; 430mA in operating mode
Operating Temperature
-10 to 50℃
Operating Humidity
10 to 85% (non condensing)
Dimensions
99 L x 144 W x 28 D mm
PM074-S Revision 1
Page 1 of 2
UIC681 Simple Manual
2009-2-19
PIN ASSIGNMENT
Interface J10 Pin Assignment
DB9
Signal
GND
RxD
TxD
Shield
Direction
PCB-J1
Signal
GND
Å Serial data to host
TXD_Out
Æ Serial data from host
RXD_In
VCC
Serial Pass-thru or USB data
TXD2 (or USB D-)
Serial Pass-thru or USB data
RxD2 (or USB D+)
Select
PM074-S Revision 1
Page 2 of 2

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 2
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:14716d80-8179-41ec-b03f-367caebb38cd
Producer                        : Acrobat Distiller 6.0 (Windows)
Company                         : UIC
Manager                         : Jason Hsieh
Source Modified                 : D:20090219071009
Headline                        : 
Create Date                     : 2009:02:19 15:10:22+08:00
Creator Tool                    : Acrobat PDFMaker 6.0 for Word
Modify Date                     : 2009:02:19 15:11:09+08:00
Metadata Date                   : 2009:02:19 15:11:09+08:00
Document ID                     : uuid:a49f9d08-0d3f-441f-b350-36dadfd0cbee
Version ID                      : 4
Format                          : application/pdf
Title                           : UIC680SG Simple Manual
Creator                         : Wilson W.
Subject                         : 
Tagged PDF                      : Yes
Author                          : Wilson W.
EXIF Metadata provided by EXIF.tools
FCC ID Filing: TFJ681

Navigation menu