Uniform 682LT1 Contactless Card Reader User Manual UIC682 Simple Manual Rev 1

Uniform Industrial Corp. Contactless Card Reader UIC682 Simple Manual Rev 1

682 User manual revised

Download: Uniform 682LT1 Contactless Card Reader User Manual UIC682 Simple Manual Rev 1
Mirror Download [FCC.gov]Uniform 682LT1 Contactless Card Reader User Manual UIC682 Simple Manual Rev 1
Document ID1050058
Application IDHkINciP6VPSoPTPmuyfcwQ==
Document Description682 User manual revised
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize62.65kB (783179 bits)
Date Submitted2008-12-28 00:00:00
Date Available2008-12-30 00:00:00
Creation Date2008-12-10 14:16:04
Producing SoftwareAcrobat Distiller 6.0 (Windows)
Document Lastmod2008-12-22 15:33:16
Document TitleMicrosoft Word - UIC682 Simple Manual_Rev.1_.doc
Document CreatorPScript5.dll Version 5.2.2
Document Author: 8402

UIC682 Simple Manual
2008-12-1
UIC682 SERIES
Contactless Smart Card Reader Module
(Support M-Chip & qVSDC)
Thank you for purchasing the UIC682 series products.
The contactless smart card reader module UIC682 is mainly to support the contactless payment systems. The
small footprint size of the module makes it easily to integrate to the current transaction system such as
Point-of-Sale terminal, kiosk, and vending machine station as the part of the system. The module
communicates with a host computer or terminal using a standard TTL interface.
FEATURES
Small footprint PCB size: 89L* 35 W (mm) without antenna board
Supports ISO 14443 type A & B standard
Supports American Express® ExpressPay, MasterCard® PayPassTM, Visa® MSD applications
Reads/writes Philips Mifare® classical contactless smart card
Provides the options for the direct coupling antenna and the remote antenna
TTL (optional) Interface
TTL F2F magnetic stripe decode data pass through (optional)
F2F decoder data emulation (optional)
Firmware upgradeable
AGENCY APPROVAL
Pb
Specifications for FCC Class B, CE Class B
Changes or modifications are not expressly approved by the manufacturer could void the user's authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/ TV technician for help.
You are cautioned that any change or modifications to the equipment not expressly approve by the party responsible for
compliance could void your authority to operate such equipment.
* Note: The external label of the enclosed module can use wording such as the following: "Contains Transmitter
Module FCC ID: TFJ682LT1¨
SPECIFICATIONS
Communication
Standard TTL signal level
Power Requirements
5VDC
Power Consumption
330mA in idle mode; 430mA in operating mode
Operating Temperature
-10 to 50℃
Operating Humidity
10 to 85% (non condensing)
Dimensions
89L x 35W mm, without antenna board
PM070-S Revision 1
Page 1 of 2
UIC682 Simple Manual
2008-12-1
PIN ASSIGNMENT
J4 Antenna Port Pin Assignment
Extension Port J8 Pin Assignment
Contact number
Signal
Contact number
Signal
RF output
VCC
GND
GND
DI/DO
CLK
Reserved
50 RF Antenna Port J2B Pin Assignment
Contact number
Signal
RF output
BDR_IN
GND
C-GND
Out Port J7 Pin Assignment
Contact number
Signal
VCC
GND
DI/DO
CLK
×
Reserved
BDR
C-GND
PM070-S Revision 1
Page 2 of 2

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-702
About                           : uuid:f7df29a5-3cfa-47c8-94ca-fe67d5b54399
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2008:12:10 14:16:04+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2008:12:22 15:33:16+08:00
Metadata Date                   : 2008:12:22 15:33:16+08:00
Document ID                     : uuid:8f1795c5-74b6-435c-a099-9e54cda89fee
Instance ID                     : uuid:1de47f1f-dcc4-49e2-8315-270403b36b5e
Format                          : application/pdf
Creator                         : 8402
Title                           : Microsoft Word - UIC682 Simple Manual_Rev.1_.doc
Page Count                      : 2
Author                          : 8402
EXIF Metadata provided by EXIF.tools
FCC ID Filing: TFJ682LT1

Navigation menu