Uniform NPOS15 POS System User Manual nPOS15 manual Eng 20160107Frank

Uniform Industrial Corp. POS System nPOS15 manual Eng 20160107Frank

Contents

User manual

n
P
U
PO
U
se
r
V
O
S
r
M
a
V
ersion 1.
S
1
a
nu
a
0
15
a
l
1
Contents
Safety information.........................................................................................................................................3
Package contents.........................................................................................................................................5
2
Conventions used in this manual
To highlight key information in this manual, some text are presented as follows:
IMPORTANT! This message contains vital information that must be followed to complete a task.
WARNING! This message contains important information that must be followed to keep you safe while performing
tasks and prevent damage to your devices data and components.
Safety information
Your POS is designed and tested to meet the latest standards of safety for information
technology equipment. However, to ensure your safety, it is important that you read the
following safety instructions.
Setting up your system
Read and follow all instructions in the documentation before you operate your system.
‧ Do not use this product near water or a heated source such as a radiator.
‧ Set up the system on a stable surface.
3
‧ Openings on the chassis are for ventilation. Do not block or cover these openings. Ensure
that you leave plenty of space around the system for ventilation. Never insert objects of
any kind into the ventilation openings.
‧ Use this product in environments with ambient temperatures between 0˚C and 40˚C
(32˚F~104˚F).
‧ If you use an extension cord, ensure that the total ampere rating of the devices
plugged into the extension cord does not exceed its ampere rating.
Care during use
• Do not walk on the power cord or allow anything to rest on it.
• Do not spill water or any other liquids on your system.
• When the system is turned off, a small amount of electrical current still flows. Always
unplug all power, modem, and network cables from the power outlets before cleaning
the system.
• The touch screen requires periodic cleaning to achieve the best touch sensitivity. Keep
the screen clean from foreign objects or excessive dust accumulation. To clean the
screen:
• Turn off the system and disconnect the power cord from the wall.
• Spray a small amount of a household glass cleaner onto the supplied cleaning cloth
and gently wipe the screen surface.
• Do not spray the cleaner directly on the screen.
• Do not use an abrasive cleaner or a coarse cloth when cleaning the screen.
• If you encounter the following technical problems with the product, unplug the power cord
and contact a qualified service technician or your retailer.
• The power cord or plug is damaged.
• Liquid has been spilled into the system.
• The system does not function properly even if you follow the operating instructions.
• The system was dropped or the cabinet is damaged.
• The system performance changes.
Packag
e
1. nP
O
2. Po
w
3. Po
w
4. Se
c
(
O
5. Ma
n
e
conte
n
O
S
w
er Adap
w
er Cord
c
ond dis
p
O
ptional)
n
ual
NOTES:
• Conta
c
• Conte
n
n
ts
tor
p
lay hold
e
c
t your retail
e
n
ts may var
y
e
r
e
r if any of t
h
per country
4
h
e items are
or region.
damaged o
r
missing.
§
§§
§ 15.21 Information to user.
Notice:
Any changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
§
§§
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co‐located or operating in conjunction with any other antenna or
transmitter.
2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This
equipment should be installed and operated with a minimum distance of 20 centimeters between the
radiator and your
body.
5

Navigation menu