Unimac M30 Control Users Manual AU09 202

UW125 au09-202

UW125 to the manual 95c9ad9b-cf18-485d-86e9-be9f39980ec7

: Unimac Unimac-M30-Control-Users-Manual-459170 unimac-m30-control-users-manual-459170 unimac pdf

Open the PDF directly: View PDF .
Page Count: 2

UW35

UW60

UW80

UW100

UW125

M30 Control

On-Premises

Hardmount Washer-Extractors

Expert Solutions from the Laundry Experts

Value Line

®

AU09-202

®

Alliance Laundry Systems

Shepard Street, Ripon, WI 54971 Telephone: 1-800-587-5458

www.unimac.com

UniMac’s Value Line is high

in quality, low in price.

When you need good quality, highly reliable laundry

equipment, our mid-featured Value Line will fit your

budget. This group of washer-extractors uses the same

A-frame design as our premium high performance

models. It also offers the same industry-leading three-

and five-year limited parts warranties. UniMac’s Value

Line cuts no corners in reliability! This is your best

choice to save capital on your initial investment.

Standard Features

• Energy Saving Drive

You get industry-leading technology, featuring a simple,

single motor with belt drive. With our mid-featured drive,

you get five speeds, including a two wash speed.

• High Speed Extract

UniMac has built its reputation on offering industry-

leading extraction speeds. The higher G-Force created

during extraction removes more water, thereby reducing

drying time. Our mid-level, 180 G-Force is high compared

to many competitive models. It also can be programmed

at lower speeds for 100% polyester fabrics.

• M30 Programmable Control (PDA/PC or manual)

With 30 preset cycles, this control provides ultimate flexibility.

Special features such as cycle time remaining, cycle counter,

test-cycle for diagnostics, 1/2 speed wash for delicate items

make this control a great value. Also included are 30 water

levels and eight fill segments choices. Our special water

management leak detection system wil assist in further

reducing water use.

• Fill Valves

The two brass fill valves are the same high quality components

used in our premium models.

• Supply Dispenser

The Value Line offers four liquid signals for automated

dispensing. It also can be used as a dry supply dispenser

with five flushing compartments.

A 5-year limited warranty is issued on the frame, basket, shaft, bearings and

seals if failure or breakage should occur during normal operation due to defects

in material or workmanship that would prohibit its further use. A full 3-year

warranty also is issued to the original purchaser on all parts. Labor not included.

UW35 M30 UW60 M30 UW80 M30 UW100 M30 UW125 M30

Capacity - lb (kg) 35 (15.9) 60 (27.3) 80 (36.4) 100 (45.5) 125 (56.9)

Width - in (mm) 32 1/2" (826) 36 5/8" (930) 41 1/2" (1054) 41 1/2" (1054) 48" (1219)

Depth - in (mm) 38 1/4" (972) 45" (1143) 51 1/2" (1308) 54 1/2" (1384) 58" (1473)

Height - in (mm) 55 1/2" (1410) 64 1/2" (1638) 68 1/2" (1740) 68 1/2" (1740) 72" (1829)

Cylinder Diameter - 26 1/4" (667) 32" (813) 36" (914) 36" (914) 42" (1067)

in (mm)

Cylinder Depth - 18 3/8" (467) 20" (508) 21" (533) 27" (686) 24" (610)

in (mm)

Cylinder Volume - 5.76 (163) 9.31 (264) 12.4 (350) 15.9 (450) 19.4 (544)

cu. ft. (liters)

Door Opening - 14 3/8" (364) 17 1/2" (445) 17 1/2" (445) 17 1/2" (445) 20" (508)

in (mm)

Door Bottom 23 3/4" (603) 28 1/4" (718) 29" (737) 29" (737) 29" (737)

to Floor - in (mm)

Wash Speed - RPM 42 40 40 40 37

Distribution Speed - 83 71 73 70 62

RPM

High 1 Extract - 328 (40) 297 (40) 280 (40) 280 (40) 260 (40)

RPM (G-Force)

High 2 Extract - 534 (106) 483 (106) 456 (106) 456 (106) 422 (106)

RPM (G-Force)

High 3 Extract - 695 (180) 630 (180) 594 (180) 594 (180) 550 (180)

RPM (G-Force)

Water Inlet 3/4" (19) 3/4" (19) 3/4" (19) 3/4" (19) (2 ea) 1" (25)

Connection - in (mm)

Steam Connection - 1/2" (13) 1/2" (13) 1/2" (13) 1/2" (13) 3/4" (19)

in (mm)

Drain Diameter - 2.4" (60) 3" (76) 3" (76) 3" (76) 3" (76)

in (mm)

Motor Size - HP (kW) 2.3 (1.7) 3.0 (2.2) 5.0 (3.7) 5.0 (3.7) 7.5 (5.6)

H 64" (1630) 74 1/2" (1892) 77 1/4" (1962) 77 1/4" (1962) 77 3/4" (1980)

W 38" (970) 40" (1016) 44" (1118) 44" (1118) 61 1/2" (1560)

D 47" (1200) 49" (1245) 60 1/2" (1537) 60 1/2" (1537) 60" (1520)

Net Weight - lb (kg) 750 (341) 1079 (490) 1644 (747) 1680 (762) 2211 (1005)

Shipping Weight - 800 (361) 1268 (575) 1705 (773) 1745 (792) 2525 (1148)

lb (kg)

Agency Approvals* usETLc, CE usETLc, CE usETLc, CE usETLc, CE usETLc, CE

Specifications

* Agency approvals may vary depending on configuration. Consult factory for details.

For electrical specifications, circuit breaker requirements and full load amperages, see your

authorized UniMac distributor. Manufacturer strongly recommends using a circuit breaker

instead of fuses. Use 3-pole circuit breakers for 3-phase machines.

For the most accurate information, the installation guide should be used for all design and con-

struction purposes. Due to continuous product improvements, design and specifications subject

to change without notice. The quality management systems at all Alliance Laundry Systems’ Ripon

facility has been registered to ISO 9001:2000.

©Copyright 2009 Alliance Laundry Systems LLC

No wonder UniMac is America’s No. 1 selling washer!

Shipping

Dimensions -

in (mm)