Unitech Electronics EA500BTNFL Handheld Data Terminal User Manual

Unitech Electronics Co., Ltd. Handheld Data Terminal User Manual

Contents

User_Manual

21 2 3 4
Appearance and Buttons Installing SIM/ SD Card
Take
the
thimble
to
remove
the
card
holder,
place
the
SIM
card
1,
Front view card 2 and SD card correctly on the card slot (as shown below):
Front Camera
System LED
Charge LED
SIM/SD Slot Volume Button
Scan LED Scan button Scan button
Power Button Custom Button
Touch Screen
Touch Buttons
To turn on device:
Hold power button until the device switches on.
To turn off device:
Hold power button during operation until the device
shows a menu, select “Power off”.
To turn off display: Press the power button .Device also turn off the
display automatically if left idle for some time.
That amount of time can be configure at
“Setting→Display→Sleep”
Rear view
Flash
NFC
Rear Camera
Focus Point
To turn on the display: Press the power button lightly . SIM Card 2 SIM Card 1
EA500
Series
Quick
Reference
Guide
Side view
Scanner
Earphone Port
POGO Pin
USB Port
Loudspeaker
SD Slot
5 6 7 8
Direct charging instructions
Plug
the Type
C
USB
data
cable
into
one
end
of
the
power
adapter
and
directly
connect
one
end
of
the
Type
C
USB
data
cable
to
the
charging socket of the device for charging. The charging indicator on
the
device
in
charging
state
is
red,
and
the
red
light
is
off
after
the
charger is fully charged.
Battery Operation
The device battery is Li-ion type battery and not removable, which
should only be charged by using original power supply.
Do not store battery in hot, humid, or corrosive environment.Do not
break or crack battery.
Do not store battery when it is fully charged completely drained.
Please shut down the device to save.
Connecting to PC
After you install the Android driver or an Android smart phone
assistant, you can connect the devices to your PC with USB cable
provided. (You can download the software mentioned above from
http://www.ute.com. After device connected to your PC, the screen
would display like this:
Open the system storage and removable disk at the same time in
Windows PC → my computer can view the storage device, and can
transfer and store data
Note: If you want to insert a memory card on your device to use it as
a removable disk, if you do not insert a memory card, you will
not see a removable disk on my computer
Note: The battery should be charged for at least 8 hours before the first
use.
Tap the top of the screen,
drag downwards and the
USB setting interface will
appear.
Click on this to go the next
right interface
Click on this to go the next
left interface
CAUTION!
· To ensure the unit working properly, please keep all connectors
away from the contaminants staying inside of them such as dust,
grease, mud, and water. The negligence may cause the unit with no
communication,
short circuited, overheated and so on.
· If the connector is damaged, please ensure the connector is being
fully repaired before using the unit to avoid causing short circuited.
http://www.ute.com/
Copyright 2018 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
Thank you for purchasing the unitech product.
For other product documentation, please scan the QR code for more
information.
Power Adapter
Type-C USB Cable To transfer pictures
To turn on debug mode Open the device memory and
removable disk
WARNING
Declaration
This device (FCC ID: HLEEA500BTNFL) complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) the device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Declaration:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
Warning:
Changes or modifications made to this equipment not expressly approved by unitech may void the FCC authorization to operate this equipment.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
The device complies with the RF Exposure requirements when the devices. If use near the body is maintained at a minimum separation distance of 1.0 cm using a device holster/case which is not composed of mental
components or is operated at more than 1.0cm from the body.
The Specific Absorption Rate (SAR) is the unit of measurement for the amount of radio frequency energy absorbed by the body when using a device. The SAR value is determined at the highest certified power level in
laboratory conditions, but the actual SAR level of the device when being operated can be well below the value. This is because the device is designed to use the minimum power required to reach the network. The
SAR limit adopted by USA and Canada is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The Highest SAR value reported under this standard product certification for use the ear is 1.193W/kg and when
properly worn on the body is 0.849 W/kg.

User Manual

21 2 3 4
Appearance and Buttons Installing SIM/ SD Card
Take
the
thimble
to
remove
the
card
holder,
place
the
SIM
card
1,
Front view card 2 and SD card correctly on the card slot (as shown below):
Front Camera
System LED
Charge LED
SIM/SD Slot Volume Button
Scan LED Scan button Scan button
Power Button Custom Button
Touch Screen
Touch Buttons
To turn on device:
Hold power button until the device switches on.
To turn off device:
Hold power button during operation until the device
shows a menu, select “Power off”.
To turn off display: Press the power button .Device also turn off the
display automatically if left idle for some time.
That amount of time can be configure at
“Setting→Display→Sleep”
Rear view
Flash
NFC
Rear Camera
Focus Point
To turn on the display: Press the power button lightly . SIM Card 2 SIM Card 1
EA500
Series
Quick
Reference
Guide
Side view
Scanner
Earphone Port
POGO Pin
USB Port
Loudspeaker
SD Slot
5 6 7 8
Direct charging instructions
Plug
the Type
C
USB
data
cable
into
one
end
of
the
power
adapter
and
directly
connect
one
end
of
the
Type
C
USB
data
cable
to
the
charging socket of the device for charging. The charging indicator on
the
device
in
charging
state
is
red,
and
the
red
light
is
off
after
the
charger is fully charged.
Battery Operation
The device battery is Li-ion type battery and not removable, which
should only be charged by using original power supply.
Do not store battery in hot, humid, or corrosive environment.Do not
break or crack battery.
Do not store battery when it is fully charged completely drained.
Please shut down the device to save.
Connecting to PC
After you install the Android driver or an Android smart phone
assistant, you can connect the devices to your PC with USB cable
provided. (You can download the software mentioned above from
http://www.ute.com. After device connected to your PC, the screen
would display like this:
Open the system storage and removable disk at the same time in
Windows PC → my computer can view the storage device, and can
transfer and store data
Note: If you want to insert a memory card on your device to use it as
a removable disk, if you do not insert a memory card, you will
not see a removable disk on my computer
Note: The battery should be charged for at least 8 hours before the first
use.
Tap the top of the screen,
drag downwards and the
USB setting interface will
appear.
Click on this to go the next
right interface
Click on this to go the next
left interface
CAUTION!
· To ensure the unit working properly, please keep all connectors
away from the contaminants staying inside of them such as dust,
grease, mud, and water. The negligence may cause the unit with no
communication,
short circuited, overheated and so on.
· If the connector is damaged, please ensure the connector is being
fully repaired before using the unit to avoid causing short circuited.
http://www.ute.com/
Copyright 2018 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
Thank you for purchasing the unitech product.
For other product documentation, please scan the QR code for more
information.
Power Adapter
Type-C USB Cable To transfer pictures
To turn on debug mode Open the device memory and
removable disk
WARNING
Declaration
This device (FCC ID: HLEEA500BTNFL) complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) the device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Declaration:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
Warning:
Changes or modifications made to this equipment not expressly approved by unitech may void the FCC authorization to operate this equipment.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
The device complies with the RF Exposure requirements when the devices. If use near the body is maintained at a minimum separation distance of 1.0 cm using a device holster/case which is not composed of mental
components or is operated at more than 1.0cm from the body.
The Specific Absorption Rate (SAR) is the unit of measurement for the amount of radio frequency energy absorbed by the body when using a device. The SAR value is determined at the highest certified power level in
laboratory conditions, but the actual SAR level of the device when being operated can be well below the value. This is because the device is designed to use the minimum power required to reach the network. The
SAR limit adopted by USA and Canada is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The Highest SAR value reported under this standard product certification for use the ear is 1.193W/kg and when
properly worn on the body is 0.849 W/kg.

Navigation menu