Unitech Electronics MS912BT Bluetooth Pocket CCD Scanner User Manual MS912 UM V1 0 20131021

Unitech Electronics Co., Ltd. Bluetooth Pocket CCD Scanner MS912 UM V1 0 20131021

user manual

Download: Unitech Electronics MS912BT Bluetooth Pocket CCD Scanner User Manual MS912 UM V1 0 20131021
Mirror Download [FCC.gov]Unitech Electronics MS912BT Bluetooth Pocket CCD Scanner User Manual MS912 UM V1 0 20131021
Document ID2107030
Application IDGOKtFrhjjNWUz5xDVDdL0g==
Document Descriptionuser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize272.16kB (3402013 bits)
Date Submitted2013-10-31 00:00:00
Date Available2014-04-30 00:00:00
Creation Date2013-10-21 18:09:54
Producing SoftwareGPL Ghostscript 8.15
Document Lastmod2013-10-21 18:09:54
Document TitleMicrosoft Word - MS912_UM_V1 0 20131021.DOC
Document CreatorPScript5.dll Version 5.2.2
Document Author: User

Wireless CCD Scanner
- MS912 -
User’s Manual
Version 1.0
Unitech electronics co., ltd.
5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
 Tel: + 886 2 89121122  Fax: +886 2 89121810  website: www.ute.com
Unitech electronics co., ltd.
5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
 Tel: + 886 2 89121122  Fax: +886 2 89121810  website: www.ute.com
Table of Contents
Table of Contents ...................................................................................................................... i
Chapter 1................................................................................................................................... 1
Overview ................................................................................................................................... 1
Package Contents .......................................................................................................... 2
Chapter 2................................................................................................................................... 3
Installation and Connection .................................................................................................... 3
Connecting (Pairing) the Scanner to a Host PC...................................................... 3
Connecting via Serial Port Profile (SPP) Mode ....................................................... 8
Connecting via Human Interface Device (HID) Mode ............................................ 3
Connecting via Human Interface Device (HID) Mode (Non-Pincode) ................ 6
Smartphone Connection (Android) ............................................................................. 8
Smartphone/ Tablet PC Connection (iOS) ................................................................ 9
Set Bluetooth Device ID ................................................................................................ 9
Power Management..................................................................................................... 10
Scanner LED & Beeper Indication............................................................................ 10
Charging the Battery .................................................................................................... 11
Chapter 3................................................................................................................................. 13
Specification ........................................................................................................................... 13
Chapter 4................................................................................................................................. 15
User Preferences.................................................................................................................... 15
Chapter 5................................................................................................................................. 23
Appendix A ............................................................................................................................. 29
Setup Chart............................................................................................................................. 29
Appendix B ............................................................................................................................. 55
Smartphone Connection (Android) ........................................................................... 55
Smartphone/ Tablet PC Connection (iOS) .............................................................. 60
Appendix C ............................................................................................................................. 65
Worldwide Support ................................................................................................................ 65
Unitech electronics co., ltd.
5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
 Tel: + 886 2 89121122  Fax: +886 2 89121810  website: www.ute.com
Chapter 1
Overview
Introducing the MS912
The MS912 scanner combines miniaturized barcode scan engine and wireless technology to
provide the best value in a wireless handheld scanner. Featuring lightweight and ease-of-use,
the MS912 scanner ensures the productivity and mobility of your business application.
The MS912 is the smallest wireless scanners in the market and is compatible with all major OS
on the nowadays popular smartphones and tablet PCs via both HID and SPP profiles.
Enjoy the benefits of accelerated productivity, lower cost of ownership, and freedom of
movement. The MS912 is a multipurpose scanner from a partner you can trust.
Thank you for choosing Unitech products.
Application:
 Warehouse
 Pharmacy
 Healthcare Services
 Retail
 Point of Sale (POS)
 Inventory Management
 Smartphone & Tablet PC
Unitech electronics co., ltd.
5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
 Tel: + 886 2 89121122  Fax: +886 2 89121810  website: www.ute.com
Package Contents
Please make sure the following contents are in the MS912 box. If something is missing or
damaged, please contact your Unitech representative.
MS912 scanner
Product Resource CD
Quick Guide
USB Charging Cable
Hand Strap
Quick Connection Card
Note:
1.
The scanner’s default power off (idle mode) time is 3 minutes.
2.
Please charge scanner for at least 2 hours prior to initial use.
[Scanner Detail]
Mini USB port
Exit Window
Trigger
Hard Reset Button
LED Indicator
Unitech electronics co., ltd.
5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
 Tel: + 886 2 89121122  Fax: +886 2 89121810  website: www.ute.com
Chapter 2
Installation and Connection
Connecting (Pairing) the Scanner to a Host PC
Please make sure your PC or Smartphone has a built-in wireless adaptor; the MS912 supports
both HID and SPP wireless profiles. If you are connecting it to an iOS (Apple) smartphone,
please follow the instruction of “Connecting via Human Interface Device (HID) Mode”; if you are
connecting it to an Android smartphone, please follow the instruction of “Connecting via Serial
Port Profile (SPP) Mode” or the instruction of “Human Interface Device (HID) Mode”.
Note: Android 2.x devices can work with MS912 in the SPP mode ONLY. The SPP mode
or/and the HID mode are not definitely compatible with each version of Android OS, and thus
depends on the Android-based hardware specifications defined by the Android device
manufacturers.
Connecting via Human Interface Device (HID) Mode (Recommanded)
1.
2.
3.
Turn on the wireless device on your host (PC, Smartphone, or Tablet).
Press the scanner trigger for 1 second to activate the scanner.
Scan the [Disconnect] barcode.
Disconnect
4.
5.
Press the trigger for 1 second to activate the scanner.
Scan the [HID] barcode below:
HID
6.
7.
8.
The scanner will emit several short beeps and then stop beeping. The green LED light will
flash continually during the pairing process.
On your host device, in the settings section where you can see Bluetooth settings and
manage your connections.
a. You will see the MS912 listed as [Wireless Scanner] under Bluetooth devices.
b. You will see a message under that [Pair with this device].
c. Select this device on your host and begin to pair.
Your Host device will ask you to type in a pin code.
a. Use your host device keypad to enter this pin code.
b. The pin code can be any set of numbers.
Unitech electronics co., ltd.
5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
 Tel: + 886 2 89121122  Fax: +886 2 89121810  website: www.ute.com
9.
c. We suggest using 4 numbers.
Once you have entered the pin code on the Host device, you need to set up the pin code
on the MS912 to match.
a. With the MS912, scan the Pincode Start barcode below.
Pincode Start
b. Refer to the barcode table below, and scan the same numbers that you used as the pin
code on your Host device. For example, if your pin code is “241657”,
scan [2] – [4] – [1] – [6] – [5] – [7] in sequential order:
c. Scan the [Enter] barcode below:
Enter
d. Scan the [Pincode-Stop] barcode:
Pincode-Stop
10. On your Host device you will see the message under [Wireless Scanner] saying
[connecting...].
11. Once that message turns to [Paired and Connected], the scanner will beep twice to verify
a successful connection, and you are ready to start scanning bar code date into your Host
device.
a. To do a test, open up Word or Note Pad or even a new E-mail [anything that will allow
Unitech electronics co., ltd.
5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
 Tel: + 886 2 89121122  Fax: +886 2 89121810  website: www.ute.com
you to type in data].
b. Scan a number bar code from this manual.
c. That number should appear on your Host device in the application you opened.
d. If not, please scan [Disconnect] barcode below and repeat steps 1 to 9 above.
Note. To disconnect the scanner from the host or to switch the wireless profile from one to another, please scan
the [Disconnect] barcode:
Disconnect
After scanning the [Disconnect] barcode, the MS912 will emit 3 beeps.
Unitech electronics co., ltd.
5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
 Tel: + 886 2 89121122  Fax: +886 2 89121810  website: www.ute.com
Connecting via Human Interface Device (HID) Mode (Non-Pincode)
1. Press the trigger for 1 second to activate the scanner.
2. Scan [DISCONNECT]
Disconnect
3. Scan [BT mode - HID non-pincode]; the scanner will emit 8 beeps.
BT mode - HID non-pincode
.E040$
4. Search for the scanner nearby around by
using the Bluetooth module of your host
PC.
5. Click Add a device to search for a wireless
scanner nearby around.
Unitech electronics co., ltd.
5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
 Tel: + 886 2 89121122  Fax: +886 2 89121810  website: www.ute.com
6. Click Wireless Scanner to add to the
computer. Then, click Next.
7. In this step, the computer is connecting the
wireless scanner. When it connects, click
Next.
8. Click Pair without using a code. Then,
click Next.
Unitech electronics co., ltd.
5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
 Tel: + 886 2 89121122  Fax: +886 2 89121810  website: www.ute.com
9. Then, click Close.
10. You will see a message telling that the
device driver software is installed
successfully.
11. The scanner will beep twice to verify the connection.
*Note:
In this mode, the scanner is recognized by the host as a mouse (pointing device). If your host
fails to find it, please try [Connecting via Human Interface Device (HID) Mode] instead.
Connecting via Serial Port Profile (SPP) Mode
1.
2.
3.
Turn on the wireless device on your host (PC, Smartphone, or Tablet).
Press the scanner trigger for 1 second to activate the scanner.
Scan [Disconnect] barcode.
Disconnect
4.
Scan the [SPP] barcode below:
5.
6.
The scanner will emit several beeps.
Conduct a search for the MS912 on your host. Select “Wireless Scanner” from discovered
device list and the scanner will beep twice.
Enter pincode, which is “1234” by default.
Open serial communication software with a COM port (see Device Manager) properly set
up.
The scanner will beep twice and the indicator LED will turn off to verify the successful
connection.
7.
8.
9.
SPP
Smartphone Connection (Android)
1. Pair with the scanner via [SPP]; see the topic: Connecting via Serial Port Profile (SPP)
Unitech electronics co., ltd.
5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
 Tel: + 886 2 89121122  Fax: +886 2 89121810  website: www.ute.com
Mode.
2. Install Bluetooth Connect.apk, which is available on CD.
Note: Before installation, enable ‘Unknown Sources” in Android
Authority.
3. Enable [BluetoothConnect] in the Language & Keyboard
setting window and choose [BluetoothConnect] as Input
Method.
4. Click [Connect] and you will be able to connect the scanner.
Note: BluetoothConnect needs to be installed only when you have
NO wireless input application on your Android device. Android 2.x
devices can work with MS912 in the SPP mode ONLY. The SPP
mode or/and the HID mode are not definitely compatible with each
version of Android OS, and thus depends on the Android-based
hardware specifications defined by the Android device
manufacturers.
To get the detailed example of SPP setting, refer to Appendix 2.
Smartphone/ Tablet PC Connection (iOS)
1.
2.
3.
Pair with the scanner via [HID]; see topic
“Connecting via Human Interface Device (HID)
Mode”.
Scan the numeric barcode according to the
pincode generated by the Bluetooth
application.
The scanner will beep twice to verify the
successful connection.
Note: No special application needs to be installed
when the scanner is connected to iOS smartphone/
tablet PC via HID mode.
To get the detailed example of HID setting, refer to Appendix 2.
Set Bluetooth Device ID
To customize your own Bluetooth device (MS912) name for the wireless scanner, please follow
below steps:
STEP 1
Unitech electronics co., ltd.
5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
 Tel: + 886 2 89121122  Fax: +886 2 89121810  website: www.ute.com
Scan the Default Wireless ID barcode. .B022$
STEP 2
Scan the Set Wireless ID barcode.
.B023$
STEP 3
Scan 7 alphanumeric characters from Full ASCII Chart of Appendix A.
STEP 4
Scan the Set Wireless ID barcode.
.B023$
STEP 5
Scan a desired BT mode barcode (SPP or HID) to connect.
*Note:
1. If you have connected the scanner with the host BEFORE customizing your Bluetooth device name, please
remove the device and create a new connection to make sure device name is refreshed. For PC, it is
recommended to restart the Bluetooth adaptor in order to refresh device name.
2. At Step 3, the scanner will beep three times as an alert that more than 7 characters are entered.
Power Management
When not being used, the scanner will enter idle mode to conserve battery power. Scan the
appropriate barcode below to set the time it takes the scanner to enter idle mode after any
scanning activity.
3 Minute (Default)
1 Minute
Idle Mode Disable
10 Minute
5 Minute
Scanner LED & Beeper Indication
Scanner LED & Beeper Indication
10
Unitech electronics co., ltd.
5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
 Tel: + 886 2 89121122  Fax: +886 2 89121810  website: www.ute.com
Green LED
Red LED
Beeper
Power Off or
Standby
Charging
Solid
Disconnected
or
Discoverable
Flash
Initializing
Flash
Flash
1 long beep
Power Up
1 long beep
Flash
1 beep
1 Flash
1 beep
Successful
Connection
2 beeps
Unsuccessful
Pincode
Setup
Flash
3 short beeps
Low Power
Flash
1 Flash
Scanner Barcode
scanning w/o
proper
connection
Successful
barcode scan
Out of range
Remark
See Power Off Timeout
Scan [Pincode Stop] and retry
5 beeps
4 beeps
Move closer to the host.
(high-low-high-low)
Charging the Battery
1.
2.
3.
Flip open the mini USB port on the scanner.
Insert the mini USB connector into the port on the scanner and USB A connector into a
USB port on the host PC.
Please charge the scanner for at least 2 hours (until the LED indicator turns off).
11
Unitech electronics co., ltd.
5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
 Tel: + 886 2 89121122  Fax: +886 2 89121810  website: www.ute.com
12
Unitech electronics co., ltd.
5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
 Tel: + 886 2 89121122  Fax: +886 2 89121810  website: www.ute.com
Chapter 3
Specification
MS912
Performance/Optical
Image Sensor
Linear CMOS sensor
Light Source
625nm Visible Red LED
Max. Resolution
5 mil (0.127mm)
Scan Rate
240 scans/second
Printing Contrast Scale
30% Minimum
Depth of Field
Reading Distance
(DOF PCS=90%)
Code 39, 5mil: 15mm (near) / 60mm (far)
Code 39, 13mil: 30mm (near) / 140mm (far)
Code 39, 20mil: 35mm (near) / 185mm (far)
Functionality
Symbologies
UPC-A/UPC-E, EAN-8/EAN-13, Industrial
2of 5, Codabar, Matrix 2 of 5, Code 11,
Code93, Code 32, Code 128, Standard
Code 39,Full ASCII Code 39, Interleaved 2
of 5, ChinaPostal Code, MSI Plessy Code,
UK PlessyCode, EAN/UCC 128, Telepen
Code, IATACode, GS1 Databar.
Configuration Method
Configuration barcodes
Electrical
Operation Voltage
3.7VDC ± 5%
Battery Type
Lithium-Ion
Current Consumption
Operation mode:<150mA;
Standby mode:<65mA
Battery Duration
5000 reads/charge
Environmental
ESD Protection
Functional after 4KV Contact and 8KV Air
13
Unitech electronics co., ltd.
5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
 Tel: + 886 2 89121122  Fax: +886 2 89121810  website: www.ute.com
Operating Temperature
0°C to 40°C
Storage Temperature
-20°C to 60°C
Relative Humidity
20% to 85% non-condensing
Drop Test
1.5M
Communication
Range
10M (line of sight)
Host Interface supported
Mini USB
Interface/Profile
SPP, HID
Wireless Class
Wireless Class 2
Mechanical
Housing Material
ABS
Dimensions
L65 x W24 x H18mm / 2.6 x 0.9 x 0.7in
Weight
24.6g / 0.9oz
Regulation Approvals
FCC Class B, CE
Accessories
Mini USB cable, Hand Strap, Tools CD
14
Unitech electronics co., ltd.
5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
 Tel: + 886 2 89121122  Fax: +886 2 89121810  website: www.ute.com
Chapter 4
User Preferences
Setup Procedures
This chapter describes the user-configurable settings for the MS912 and provides the
programming bar codes for selecting these features for the scanner. To configure your MS912
scanner:
1.
Locate the appropriate feature setting listed in the following pages.
2.
Set feature values by scanning single barcodes or short barcode sequences.
3.
The MS912 will beep to confirm a successful scan and will store the new setting in the
scanner’s memory.
40B
Min. Length / Max. Length
Step 1: Scan MIN LENGTH or MAX LENGTH.
Step 2: Scan two digits from Full ASCII Chart of Appendix A.
Step 3: Scan MIN LENGTH or MAX LENGTH.
NOTES:
1.
If the scanner beeps three times, it is an alert that a setting update is incomplete.
2.
If you make a mistake in attempting to update a scanner setting, such as accidentally
scanning the wrong barcode or forgetting a step, scan the [Reset] barcode below to start
the process over.
Reset
3.
If you want to restore the scanner back to factory settings, please scan the [Default]
barcode below.
Default
Bar Code Length Setting
The following examples illustrate how to set up Code 39 with a minimum length of 5 and a
maximum length of 20, respectively.
 Minimum length of 5
1. Go To "Group 4".
2. Scan "MIN LENGTH" to enter minimum length setting.
3. Scan "0 " and "5" to select length S. (Full ASCII Chart of Appendix A)
4. Scan "MIN LENGTH" to end minimum length setting.
15
Unitech electronics co., ltd.
5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
 Tel: + 886 2 89121122  Fax: +886 2 89121810  website: www.ute.com

1.
2.
3.
4.
Maximum length of 20
Go To "Group 4"
Scan "MAX LENGTH" to enter maximum length setting.
Scan "2" and "0" to select length 20. (Full ASCII Chart of Appendix A)
Scan "MAX LENGTH" to end maximum Length Setting.
Code ID Setting
Each bar code symbology supported by the scanner has a default ID character defined as
below:
Disable Code ID
Factory ID ON
CODE ID IDENTIFIER
SYMBOLOGES
MSI
EAN 8
UPC -E
Factory ID
UPC -A
EAN 13
Code 93
Code 11
TELEPEN
EAN 128
Code 128
SYMBOLOGES ID
CODABAR
UKPLESSY
FULL ASCII Code 39
STANDARD Code
39
IATA 2of5
INTERLEAVED 2 of
INDUSTRIAL 2 of S
(Code 2 of 5)
China Post Code
Code 32
Factory ID
Preamble (prefix) and Postamble (Surffix):
PREAMBLE & POSTAMBLE (PREFIX AND SUFFIX)
Clear Preamble_Postamble
Preamble(16)
EXAMPLE:
Set PREAMBLE String as "##"
POSTAMBLE String as " $$ "
SETTING PROCEDURE:
STEP 1: Scan: PREAMBLE.
STEP 2: Scan: " # " twice from Full ASCII Chart of Appendix A.
STEP 3: Scan: PREAMBLE.
STEP 4: Scan: POSTAMBLE.
STEP 5: Scan: " $" twice from Full ASCII Chart of Appendix A.
STEP 6: Scan: POSTAMBLE.
16
Unitech electronics co., ltd.
5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
 Tel: + 886 2 89121122  Fax: +886 2 89121810  website: www.ute.com
Postamble(16)
ACCURACY ADJUSTMENT
ACCURACY ADJUSTMENT
Accuracy Adjustment assures a more reliable decoded output. Enabling the feature and setting
a number from 1 to 9 subjects the decoded output a higher standard of accuracy. The higher
the number, the greater the accuracy.
17
Unitech electronics co., ltd.
5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
 Tel: + 886 2 89121122  Fax: +886 2 89121810  website: www.ute.com
SETTING PROCEDURE:
1. Scan ACCURACY ADJUSTMENT.
2. Scan one digit (1~9) from barcode menu above.
3. Scan ACCURACY ADJUSTMENT.
RESET
NOTES:
1. The scanner will beep three times as reminder that a setting is not yet complete.
2. If you make a mistake, forget a step, etc., scan RESET to start again.
FORMAT:
{Preamble} {Code ID}{Bar Code }{Postamble}
NOTES:
1.
2.
3.
A PREAMBLE is a string of up to 16 characters added to the beginning of a scanned barcode.
A POSTAMBLE is a string of up to 16 characters added to the end of a scanned bar code.
Default value for either: None.
Quick Setup
Appendix A has a quick setup chart, which gives you one label or one function for quick
customization of the scanner. To set up the scanner, locate the label with the function you want
and scan that label.
43B
Batch Setup
If you need to configure more than one scanner, you can duplicate the settings of one scanner
(master) and quickly deploy these settings to the others. You can do this by producing a set of
custom setup labels derived from the master scanner. Then simply scan these labels to
configure the other scanners.
44B
The following label is called the “Dump Settings” label. Before you scan the label, please open
a text editor application (such as Notepad or Microsoft Word) on the host PC. When you scan
the [Dump Settings] barcode, the settings of the scanner will appear within the text editor
application as one or several ASCII string(s). Use any barcode printing software, select the
Code 39 symbology, and use the string(s) to generate bar code labels. Use the batch setup
labels to duplicate these settings to the other scanners.
Dump Settings
EXAMPLE:
1. PROJECT ASSIGNMENTS:
18
Unitech electronics co., ltd.
5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
 Tel: + 886 2 89121122  Fax: +886 2 89121810  website: www.ute.com
1.1
1.2
1.3
Beep tune: BEEP LOW -- HIGH
Caps Lock Mode: CAPSLOCK ON (FIXED).
Reading Mode: CONTINUOUS AUTO OFF.
2. SETTING PROCEDURE:
1.1
Scan BEEP LOW – HIGH. (GROUP 3).
1.2
Scan CAPSLOCK ON (FIXED). (GROUP 3)
1.3
Scan CONTINUOUS AUTO OFF. (GROUP 2)
3.
All parameters will be converted to alphanumeric characters and shown on the monitor.
19
Unitech electronics co., ltd.
5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
 Tel: + 886 2 89121122  Fax: +886 2 89121810  website: www.ute.com
4.
Print the results shown on the monitor as bar codes with a bar code printer. The bar codes
should be in the Code 39 symbology.
5.
Scan these labels with any of the scanners you wish to configure similarly to the master.
Be sure to scan from the first row to the second row and so on sequentially, top to bottom.
CORRECT SETTING
41B
WRONG SETTING
Wrong Setting: The string “…" consists of 4
Dots, located at the beginning of second
rows. Do not break the "…" into multiple
strings.
Wrong Setting: The string lengths in the
second and third rows do not match the
length requirements because rows should
be in lengths that are multiples of 4.
Wrong Setting because you added "…" after .A017$.
The .A017$ is a FIXED parameter required for setup.
It is an uneditable parameter. Do not add, delete, or
rearrange data from the FIRST row.
Only the settings that are different from the default values will be dumped.
The settings can be dumped to either a PC or terminal, if the Device Types of the PC or
terminal match that of the scanner. The previous example of “Keyboardless Wedge” as
Device Type is equivalent to a PC/AT interface, so you cannot dump the scanner settings
to a system that does not support a PC/AT keyboard interface.
The following label dumps the settings to a PC/AT regardless of the type of device that
has been chosen on the scanner.
Dump Settings on PC_AT
20
Unitech electronics co., ltd.
5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
 Tel: + 886 2 89121122  Fax: +886 2 89121810  website: www.ute.com

You can adjust the length of the dumped strings by combining multiple strings into one or
breaking one string into multiple strings. The following strings have the same effect as the
dumped string listed above:
You cannot delete any character from or add any character to the strings and the first
three characters ("...") must be present in the first string.
All characters in dumped strings are uppercase. If you see lowercase characters in
dumped strings, change them to uppercase.
21
Unitech electronics co., ltd.
5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
 Tel: + 886 2 89121122  Fax: +886 2 89121810  website: www.ute.com
22
Unitech electronics co., ltd.
5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
 Tel: + 886 2 89121122  Fax: +886 2 89121810  website: www.ute.com
Chapter 5
Features of Memory Version
. A007$
CHECK VERSION
BATCH MODE
Being out of range, the scanner will temporarily keep scanned data in its memory buffer (2K
RAM) until the buffer is full. The scanner will send all stored data back to the host after getting
in range.
*Note: Batch Mode will not function when Memory Mode is enabled, or no connection is made
beforehand.
The following pages only apply to the memory version mini wireless scanner, MS912M (P/N:
MS912-5UBB00-SG), which can be easily distinguished by an “M” mark on the rear of the
scanner.
23
Unitech electronics co., ltd.
5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
 Tel: + 886 2 89121122  Fax: +886 2 89121810  website: www.ute.com
MEMORY MODE
. R001$
ENABLE MEMORY
. R002$
DISABLE MEMORY
Once enabled, the scanner will stop sending data via Bluetooth and start storing data into the
internal flash disk. (2MB)
Delete Last Record/Clear All Record
. R005$
DELETE LAST RECORD
. R004$
CLEAR ALL RECORD
OUTPUT DATA
. R003$
OUTPUT DATA
Data Output Method
. R014$
WIRELESS
24
Unitech electronics co., ltd.
5F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
 Tel: + 886 2 89121122  Fax: +886 2 89121810  website: www.ute.com
. R013$
USB-VCP
To output stored data via Wireless, please do the following:
1. Scan [WIRELESS]
2. Scan [OUTPUT DATA]
To output stored data via USB-VCP, please do the following:
1. Install VCP driver (available on CD)
2. Connect the scanner & host with USB cable
3. Scan [USB-VCP]
4. Save data as * .csv by “Covert to CSV.exe” (available on CD)
DATA FORMAT
. R011$
DATA FORMAT
The default Data Format is , ,
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 71
Producer                        : GPL Ghostscript 8.15
Create Date                     : 2013:10:21 18:09:54
Modify Date                     : 2013:10:21 18:09:54
Title                           : Microsoft Word - MS912_UM_V1 0 20131021.DOC
Creator                         : PScript5.dll Version 5.2.2
Author                          : User
EXIF Metadata provided by EXIF.tools
FCC ID Filing: HLEMS912BT

Navigation menu