Unitech Electronics MT700NHF Multi-functional T&A; Terminal User Manual MT700UM V1 0 2014 3 19

Unitech Electronics Co., Ltd. Multi-functional T&A; Terminal MT700UM V1 0 2014 3 19

Users Manual

$i About This Manual Preface This manual explains how to install, operate and maintain the MT700 Multi-Function Versatile Controller. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from the manufacturer, which includes photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice. © Copyright 2013 unitech Electronics Co., Ltd. All rights reserved. Unitech global website address: http:\\www.unitech-adc.com Microsoft, Windows and ActiveSync are either registered trademarks or trademarks of Microsoft Corporation. Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. Regulatory Compliance Statements FCC Warning Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following:  Relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit that is different from the receiver.  Consult the distributor or an experienced radio/television technician for help. 1. This Transmitter must not cohabitate or operate in conjunction with any other antenna(s) or transmitter(s). 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with FCC RF exposure compliance requirements, avoid direct contact to the transmitting antenna during transmission. 3. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.$

ii This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and consider removing the no-collocation statement. Canadian Compliance Statement This Class A Digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe A respecte les exigences du Règlement sur le matériel broilleur du Canada. European Conformity Statement Declaration of Conformity with Regard to the R&TTE 1999/5/EC and EMC 89/336/ EEC directives. RoHS Statement This device conforms to RoHS (Restriction of Hazardous Substances) European Union regulations that set maximum concentration limits on hazardous materials used in electrical and electronic equipment. Taiwan NCC Warning Statement 交通部電信總局低功率電波輻射性電機管理辦法 (930322) 根據交通部低功率管理辦法規定：第十二條經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。第十四條低功率射頻電機之使用不得影響飛航安全及幹擾合法通信；經發現有干擾現象時，應立即停用，並改善至無幹擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 Warranty The following items are covered under Unitech Limited Warranty:  MT700 Multi-Function Versatile Controller – 1-year limited warranty.  Cables – three-month limited warranty.

iii Table of Contents PREFACE ................................................................................................................................... I Regulatory Compliance Statements......................................................................................... i ABOUT THIS MANUAL.............................................................................................................. I Warranty ..................................................................................................................................ii CHAPTER 1............................................................................................................................... 1 Introducing the MT700............................................................................................................ 1 Tour of the MT700................................................................................................................... 1 GETTING STARTED.................................................................................................................. 1 Front View........................................................................................................................... 2 Side View ............................................................................................................................ 2 Bottom View........................................................................................................................ 3 Front Main Board ................................................................................................................ 3 Back Terminal Board........................................................................................................... 4 Setting up the MT700 ............................................................................................................. 4 Connecting Power............................................................................................................... 4 Powering On the MT700 ..................................................................................................... 4 Using the MT700 for the First Time......................................................................................... 4 Using the Touch-screen ...................................................................................................... 4 Setting the Date and Time................................................................................................... 5 CHAPTER 2............................................................................................................................... 6 On-screen virtual Keyboard ................................................................................................ 6 BASIC OPERATION .................................................................................................................. 1 RFID Reader (Optional).......................................................................................................... 7 RFID Card Verification ........................................................................................................ 7 Audio Input/Output.................................................................................................................. 8 Built-in Camera....................................................................................................................... 9 Tools/Utilities/Applications..................................................................................................... 10 Warm Boot ........................................................................................................................ 10 Cold Boot .......................................................................................................................... 11 I/O Card Control................................................................................................................ 11 Registry Backup................................................................................................................ 12

iv Func 9 ............................................................................................................................... 13 Server Manager ................................................................................................................ 13 MifareDemo ...................................................................................................................... 19 CameraDemo.................................................................................................................... 20 WavTest ............................................................................................................................ 22 Screen Rotation ................................................................................................................ 23 Calibration......................................................................................................................... 24 Net .................................................................................................................................... 25 Windows CE Remote Management .................................................................................. 26 CHAPTER 3............................................................................................................................. 29 USB Port............................................................................................................................... 29 DATA COMMUNICATION .......................................................................................................... 1 Establishing a Wi-Fi Connection ........................................................................................... 30 IP Address Setup .................................................................................................................. 30 Obtaining an IP Address via DHCP Server........................................................................ 30 Specifying an IP Address .................................................................................................. 31 CHAPTER 4............................................................................................................................. 32 Adjusting the Backlight ......................................................................................................... 32 POWER AND HARDWARE ....................................................................................................... 1 Hardware Reset.................................................................................................................... 33 Performing a Software Reset................................................................................................ 33 Performing a Warm Boot................................................................................................... 33 Performing a Cold Boot..................................................................................................... 34 Terminal Block ...................................................................................................................... 35 APPENDIX A ........................................................................................................................... 36 SYSTEM SPECIFICATION ........................................................................................................ 1 APPENDIX B ........................................................................................................................... 37 WORLDWIDE SUPPORT .......................................................................................................... 1

1 Getting Started Chapter 1 Introducing the MT700 The MT700 is a versatile fixed-mount TASHI (Time & Attendance, Access Control, Surveillance, Home Automation and Intercom) Controller. This multi-functional device offers a RFID reader (optional), a microphone, and an audio speaker. It runs on a Windows CE 6.0 operating system, which provides a variety of applications that benefit numerous industries. Features Internal System  TI OMAP DM3730 with DSP 1GHz Processor  Microsoft Windows CE 6.0 Memory  512M bytes DDR SDRAM  512M bytes NAND Flash Display  7 inches color TFT-LCD touch screen  1024 x 600 resolution Multimedia  Speaker Audio Output  Microphone Audio Input RFID Reader (Optional)  EM + HID  13.56MHz (ISO14443A or 14443A/B & 15693, or 14443A/4B+15693+NFC)  Finger print 1:N high performance Communication  RS485  USB 2.0 Host  Ethernet 10/100Base-T Wireless Connectivity  Supports 802.11b/g/n Wireless LAN (Optional) User Interface  12 programmable numeric keys  Touch-screen Software Programming Tools  C#, VB.NET, C++ Programming SDK  SIP and IP-CAM server/client SDK supporting  ModBus SDK supporting  Video Streaming, VoIP and V2oIP  Elfin utility Camera  1.3 megapixel CMOS camera Tour of the MT700 Please make sure the following contents are in the MT700 box. If anything appears missing or damaged, please contact a Unitech representative. MT700 Power Adapter / Cable QRG paper note 10 & 12 pin Terminal Block Plug Key * 2pcs Rubber Cap Cable tie

3 Bottom View Front Main Board The Main board can be access via unlocking the right side lock of the MT700 and removing the back steel plate. Cable hole

4 Back Terminal Board The terminal board can be access via unlocking the right side lock of the MT700 and removing the back steel plate. Setting up the MT700 Connecting Power Connect power to the MT700 through the following instruction: Plug the Power Adapter Cable into the MT700’s DC input jack and then connect the other end of the Power Adapter into an electrical outlet. Powering On the MT700 The MT700 automatically powers on when the Power Adapter plugs into an external power source. The MT700 welcome screen appears. Using the MT700 for the First Time Using the Touch-screen 1. Tap the screen to choose a menu option. 2. Double tap to open programs. 3. Use the Windows CE Keyboard to type letters or numbers into a data field or on a form. Magnetic Hall sensor

5 Setting the Date and Time In the Date/Time Properties window, touch the screen to select the current date/time, time zone and daylight saving time option.  Tap the Left or Right arrows to scroll through the desired year and month, or directly tap the year or month to change the setting.  Tap on the Hr/Min/Sec AM/PM to input the Hr/Min/Sec to set the time.  Tap the arrow and set the correct time zone from the drop-down menu.  Check the box to enable Windows to automatically adjust for day-light saving time.  Tap Apply to save the settings and exit the Date/Time Properties dialog, or tap to exit without saving. Date Setting Time Setting Time Zone Setting Daylight Saving

6 Basic Operation Chapter 2 On-screen virtual Keyboard Windows CE features on-screen virtual keyboard that simulates all functions and behaviors of physical PC keyboard. To launch the on-screen virtual keyboard, please tap  LargeKB. Entering Characters Entering alphabetic and numeric characters on the MT700 is the same as character input on a standard PC keyboard. Tap the onscreen button corresponding to the desired character. Keyboard Icon

8 6. Tap Auto and bring the RFID card close to the sensor. The code will display on the field below. 7. Tap Stop to end the reading. Audio Input/Output An audio demo program will test the audio input (recording) and output (playback). 1. Double tap My Device on the Windows CE desktop. 2. Double-tap Windows. 3. Double-tap wavtest to open the demo program. 4. Do one of the following: -- Tap Rec to record the voice. -- Tap Stop to finish recording. -- Tap Play to listen to the recording.

9 Built-in Camera The MT700 has a built-in 2.0 megapixel camera which provides the following extra functionality:  Enables users to capture still pictures when a card is being read  Checks attendant time with a photo image  Records video continuously  Functions as an audio/video intercom Additionally, facial recognition can be incorporated using third party software. The MT700 has a demo program that enables users to capture a still picture with a card number and time stamp when a card is read. To start the camera demo: 1. Double-tap the My Device icon on the Windows CE desktop. 2. Double-tap the Windows folder. 3. Double-tap CameraDemo to open the program. The testing program is displayed. 4. Tap Preview → Start. A continuous image is displayed enabling users to capture and playback video.

10 Tools/Utilities/Applications BootMode Path: Start Menu/Programs/Utilities/Boot Mode This tool allows you to perform warm boot or cold boot. Warm Boot 1. Select Start Menu -> Programs -> Utilities -> Bootmode 2. Tap “Warm Boot”. The system will be warm started.

11 Cold Boot Caution: Backup your data first! 1. Tap “BootMode”, and Tap “Cold Boot”. Then confirm the choice by selecting YES when program asked to reconfirm the command. 2. The terminal will be cold started. 3. Calibrate the screen according to the instruction displayed, and tap the screen anywhere again once the calibration is completed to continue. 4. Set the date and time, press OK. I/O Card Control Path: Start Menu/Programs/Utilities/IO Card This tool allows you enable or disable CF slot whenever it is necessary. Once you disable the slot, the card in that slot will not work until you enable the slot again. 1. Select Start Menu ->Programs -> Utilities -> IO Card 2. You may choose to enable or disable the card from this tool. Once you selected

12 disable, the card will no longer be detected unless it is enabled again. Tap “Enable” to enable the card. 3. Tap “Hide” to hide I/O Card Control window. 4. Tap “Exit” to exit I/O card control. The setting is kept after suspend and power on, however, after warm start/cold start, the setting will be resumed to default value (which is “Enable”) Registry Backup Path: Start Menu/Programs/Utilities/RegBackup This tool allows you to save the current registry or reset to factory default. 1. Select Start Menu -> Programs -> Utilities -> RegBackup. 2. Tap “Save” to save current registry settings. 3. Or tap “Restore” to reset registry to factory default. Terminal will be warm started. (Note that “Restore” button is grey out if the registry setting was not saved before)

13 Func 9 Path: Start Menu/Programs/Utilities/Func9 This tool displays the general information of the terminal such as platform, firmware version, device ID etc. 1. Select Start Menu -> Programs -> Utilities -> Func9 2. Device information is shown as below: Server Manager Path: Start Menu/Programs/Utilities/ServerManager Server Manager is a tool for the user to manager the NTLM (Windows NT LAN Manager) users, FTP users and telnet users. 1. Select Start Menu -> Programs -> Utilities -> Server Manager. 2. On “NTLM” tab, tap “Add” to add a new user.

14 3. Key in the user name and password. Tap OK. Add Success. Tap OK. 4. To modify a user’s password, select the user and tap “Modify”. 5. Enter the new password and confirm password. Tap OK. Change password success. Tap OK.

$15 6. To delete a user, select the user you want to delete, tap “Delete”. 7. Tap “Export”. The user can backup SSID, WEP, all server users and this server’s settings to \Flash Storage. 8. Tap “Import” to restore all settings.$

16 9. Under “Telnet” tab, tap “Add”. Add the telnet user from NTLM. Select the user and tap “Add”. 10. Do you want to add user X to the telnet server? Tap “Yes”. 11. To delete telnet user, select the user and tap “Delete”. Do you want to delete the user X? Tap “Yes”

17 12. Under “FTP” tab, tap “Add” to add ftp user. 13. Select the user and tap “Add”. Do you want to add user “X” to FTP server User? Tap “Yes”.

18 14. To delete ftp user, select the user and tap “Delete”. Do you want to delete the user X? Tap “Yes”. 15. Under “Server setting”tab, for telnet server setting, enable/disable server.

19 16. For FTP server setting, enable/disable server and define anonymous login. 17. Tap “Set Login Directory”. Define the login directory (Default is /Temp), tap “Set. MifareDemo This feature allows you to make Mifare card verification. Path: /My Device/Windows/MifareDemo.exe 1. Double tap “MifareDemo”.

20 2. Under “Key”, select “Connect” to activate the program. 3. Tap “Start Read” and bring the Mifare card close to the sensor. The code will be read and displayed on the following field. 4. Tap “Stop Read” to end reading. CameraDemo This utility allows image capture and video streaming. Path: /My Device/Windows/CameraDemo.exe 1. Double tap “CameraDemo”. 2. Under “Capture”, select “Capture Settings”. Define image and video dimension and storage folder, then tap “OK”.

21 3. Under “Capture”, select “Camera Settings”. Define the pixel integration time. 4. Under “Capture”, select “Flicker Detection”. Select the frequency. 5. Under “Preview”, select “Start”. Your image will be focused. Under “Capture”, select “image”. 6. Under “Preview”, select “Stop”. Under “Playback”, select “Open”. Select the image file that was captured. 7. Tap “Preview/Exit” to close.

22 WavTest Path: /My Device/WavTest This tool is to test the audio recording and display. 1. Double tap “WavTest”. 2. Change to “Stereo”. Tap “Rec”. Talk near to the microphone port of MR650. 3. Tap “Stop” to stop recording. Tap “Play” to play the audio you just recorded. 4. Tap “Save” to save this audio as a wav file.

23 Screen Rotation Path: /My Device/Windows/ScrRotation.exe Screen Rotation allows the users to rotate the screen of terminal to the right, to the left or upside down. 1. Double tap “ScrRotation.exe”. 2. The screen rotation icon will appear on the taskbar. Tap the icon to select the option from the menu. 3. Tap “Rotate Right”. The screen is rotated to the right. 4. Tap “Rotate Left”. The screen is rotated to the left. 5. Tap “Upside Down”. The screen is flipped 180° vertically. 6. Tap “About”. The version of screen rotation is shown. 7. Tap “Exit”. Screen rotation icon is disappeared.

24 Calibration This tool allows you to do calibration while the original screen calibration is no longer accurate. Path:/My Device/Windows/Calibration.exe 1. Double tap “Calibration”. 2. Use the stylus to touch the “+” (Center, Top left, Bottom left, Bottom right, Top right), then press “Enter” key.

25 Net Path: My Device/Windows/Net.exe This is a MS Dos command that allows you to share data/files with any computer in the network. (Your terminal must connect to network) 1. On your PC/notebook, share a folder to the network. 2. Execute MS DOS prompt command. 3. On the DOS prompt, type the command: Net Use //<PC’s Name>/<Shared Folder Name> <Terminal folder’s name> For Terminal folder’s name, you can specify any name you like. 4. In “My Device”, tap “Network”. You will see a terminal folder.

26 5. Open the folder. You will see the files in the folder. The content is the same as the shared folder in your PC/notebook. Windows CE Remote Management 1. Connect LAN cable to MR650. 2. Check IP address of MR650. 3. Input IP address of MR650 in the browser’s address bar. 4.Enter “admin” as default password and verify the password again.

27 5.Please input Device Name you want and press “Apply”. 6. The Windows CE Remote Management Tool interface. Device Management – Configure Network

$28 7. Click “Add/Del Users” to Add/Delete users. You can add or delete any user, except Admin. After enter “Add New”, you can see your new user under “Delete Users” 8. Click“Add/Del Network Adapter”. Select the adapter and click “Submit Query”. 9. Click “Add/Del Shares”, define a name for the folder of terminal that you want to share. 10. Click “Permission”. Select “Allow” or “Deny” for the user’s access right. Click “Update”. Click “Done”. 11. On the browser’s URL, enter \\<Device Name>\<folder name>. All the data of the shared folder of the device are shown and they are ready to be shared. 12. To remove any shared folder, click “Remove”.$

Unitech Electronics MT700NHF Multi-functional T&A; Terminal User Manual MT700UM V1 0 2014 3 19

Unitech Electronics Co., Ltd. Multi-functional T&A; Terminal MT700UM V1 0 2014 3 19

Users Manual

Navigation menu

Namespaces

Views

Navigation