Unitech Electronics PA720BTNFL Rugged Handheld Computer User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3163406
Application ID	1yo44vGY6Jc+yusv27si+w==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	203.14kB (2539308 bits)
Date Submitted	2016-10-14 00:00:00
Date Available	2017-04-20 00:00:00
Creation Date	2016-08-31 09:51:26
Producing Software	Acrobat Distiller 10.1.1 (Windows)
Document Lastmod	2016-08-31 10:04:16
Document Title	Users Manual
Document Creator	Acrobat PDFMaker 10.1 Word 版
Document Author:	USER

Rugged Handheld Computer
- PA720 -
User's Manual
Version 1.2
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
Revision History
Date
Change Description
Version
20160726
first published version
1.0
20160817
Modified 2.3, 2.4
1.1
20160829
Modified power source
1.2
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
Preface
About This Manual
Thank you for purchasing the unitech product.
This manual explains how to install, operate and maintain our product.
No part of this publication may be reproduced or used in any form, or by any
electrical or mechanical means, such as photocopying, recording, or
information storage and retrieval systems, without permission in writing from
the manufacturer. The material in this manual is subject to change without
notice.
Regulatory Compliance Statements
FCC Warning Statement
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference with radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference with radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
1.
This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
2.
This device complies with FCC RF radiation exposure limits set forth for
an uncontrolled environment. To maintain compliance with FCC RF
exposure requirements, avoid direct contact to the transmitting antenna
during transmitting.
3. Any changes or modifications (including the antennas) made to this device
that are not expressly approved by the manufacturer may void the user’s
authority to operate the equipment.
Operation on the 5.15 - 5.25GHz frequency band is restricted to indoor use
only. The FCC requires indoor use for the 5.15-5.25GHz band to reduce the
potential for harmful interference to co-channel Mobile Satellite Systems.
Therefore, it will only transmit on the 5.25-5.35 GHz, 5.47-5.725 GHz and
5.725–5.850 GHz band when associated with an access point (AP).
FCC Label Statement
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference
that may cause undesired operation.
RF Radiation Exposure Statement
For body contact during operation, this device has been tested and meets FCC
RF exposure guidelines when used with an accessory that contains no metal
and that positions the handset a minimum of 1.5 cm from the body.
Use of other accessories may not ensure compliance with FCC RF exposure
guidelines.
Canadian Compliance Statement
This Class B Digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet appareil numerique de la classe B respecte les exigences du Reglement
sur le material broilleur du Canada.
ii
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
European Conformity Statement
unitech Electronics co., Ltd herewith declares that the unitech product is in
compliance with the essential requirements and all other provisions of the
R&TTE 1999/5/EC directive, the EMC 2004/108/EC directive and the Low
Voltage 2006/95/EC directive.
The declaration of conformity is available for download at :
https://portal.unitech.eu/public/Safetyregulatorystatement
RoHS Statement
This device conforms to RoHS (Restriction Of
Hazardous Substances) European Union regulations
that set maximum concentration limits on hazardous
materials used in electrical and electronic equipment.
Waste electrical and electronic equipment (WEEE)
unitech has set up a policy and process to meet the EU
directive 2002/96/EC and update 2003/108/EC
concerning electronic waste disposal.
For more detailed information of the electronic waste
disposal of the products you have purchased from
unitech directly or via unitech’s resellers, you shall either
contact your local supplier or visit us at :
https://portal.unitech.eu/public/WEEE
iii
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
Taiwan NCC Warning Statement
交通部電信總局低功率電波輻射性電機管理辦法
第十二條：經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者
均不得擅自變更頻率、加大功率或變更原設計之特性及功能。
第十四條：低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有
干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。
低功率射頻電機需忍受合法通信或工業、科學及醫療用電波輻射性電機設備
之干擾。
注意事項:
1. 使用過度恐傷害視力。
2. 使用30分鐘請休息10分鐘；2歲以下幼兒不看螢幕，2歲以上每天看螢幕不要超過
1小時。
3.
減少電磁波影響，請妥適使用。
SAR 標準值 2.0W/Kg，送測產品實測值為 0.217 W/kg@10g
iv
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
Laser Information
The unitech product is certified in the U.S. to conform to the requirements of
DHHS/CDRH 21CFR Subchapter J and to the requirements of IEC 825-1.
Class II and Class 2 products are not considered to be hazardous. The unitech
product contains internally a Visible Laser Diode (VLD) whose emissions do
not exceed the maximum limits as set forth in the above regulations. The
scanner is designed so that there is no human access to harmful laser light
during normal operation, user maintenance or prescribed service operations.
The laser safety warning label required by the DHHS/IEC for the unitech
product’s optional laser scanner module is located on the memory
compartment cover, on the back of the unit.
* Laser information only applies to the products with laser components.
CAUTION! Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous laser
light. Use of optical instruments with the scanner, including
binoculars, microscopes, and magnifying glasses, with will
increase eye damage. This does not include eyeglasses worn by
the user.
LED Information
The unitech product contains LED indicator(s) or LED ring whose luminance is
not harmful to human eyes during normal operation, user maintenance or
prescribed service operations.
*LED information only applies to the products with LED components.
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
Battery Notice
1.
To guarantee optimal performance, it is recommended that rechargeable
batteries be replaced every year, or after 500 charging cycles are
completed. It is normal for the battery to balloon or expand after one year
or 500 cycles. Although it does not cause damage, it cannot be used again
and must be disposed of according to the location's safe battery disposal
procedures.
2.
If a battery performance decreases more than 20%, the battery is at the
end of its life cycle. Stop use and ensure the battery is disposed of
properly.
3.
The length of time that a battery lasts depends on the battery type and
how the device is used. Conserve the battery life by doing the following:
 Avoid fully uncharging the battery because this places additional
4.
5.
6.
7.
strain on it. Several partial uncharges with frequent charges are better
than a fully uncharged battery. Charging a partially charged battery
does not cause harm to the unit.
 Keep the battery cool. Avoid hot vehicles. For prolonged
storage, keep the battery at a 40% charge level.
 Do not leave the battery uncharged and unused for an extended
period of time, the battery will wear out and the longevity of the
battery will be at least half of one with frequent charges.
Protect battery life by not over or under charging the battery.
Please do not leave battery unused for long time without charging it.
Despite unitech’s safety precautions, the battery pack may begin to
change shape. If so, stop using it immediately. Please check to see if you
are using a proper power adapter to charge the battery or contact your
service provider for service.
If you cannot charge the battery after it has been idle for an extended
period of time and it begins to heat up, please do not try to charge it. It
may not be functional anymore.
Please only use the original battery from unitech. Using a third party
battery can damage our products. Please note that when such damage
occurs, it is not covered by unitech’s warranty policy.
vi
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
CAUTION!



RISK OF EXPLOSION IF BATTERY IS
REPLACED INCORRECTLY.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS.
如果更換不正確之電池行事會有爆炸的風險
請依製造商說明書處理用過之電池
如果更换不正确之电池行事会有爆炸的风险
请依制造商说明书处理用过之电池
Battery charge notice
It is important to consider temperature when the battery pack is charging.
Charging is most efficient at normal room temperature or in a slightly cooler
environment. It is essential that batteries are charged within the stated range of
0°C to 40°C. Charging batteries outside of the specified range could damage
the batteries and shorten their life cycle.
CAUTION! Do not charge batteries at a temperature lower than 0°C. This will
and make the batteries unstable and dangerous. Please use a
battery temperature detecting device for a charger to ensure a
safe charging temperature range.
Storage and safety notice
Although charged batteries may be left unused for several months, their
capacity may be depleted due to build up of internal resistance. If this happens,
they will require recharging prior to use. Batteries may be stored at
temperatures between -20°C to 60°C, however they may deplete more rapidly
at higher temperatures. It is recommended to store batteries at room
temperature.
* The message above only applies to the usage of the removable batteries.
For the products with non-removable batteries / without batteries, please refer to
the specification of each product.
vii
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
Product Operation and Storage Notice
The unitech product has applicable operation and storage temperature
conditions. Please follow the limitation of suggested temperature conditions to
avoid failure, damage or malfunction.
*For applicable temperature conditions, please refer to the specification of each
product.
Adapter Notice
1.
2.
3.
4.
Please do not leave the power adapter in the socket when it is not
connected to your unitech product for charging.
Please remove the power adapter when the battery is fully recharged.
The bundled power adapter that comes with your unitech product is not
meant to be used outdoors. An adapter exposed to water or rain, or a very
humid environment can cause damage to both the adapter and the
product.
Please only use the bundled power adapter or same specification of
adapter to charge your unitech product. Using the wrong power adapter
can damage your unitech product.
* The message above only applies to the product connected to the adapter.
For the products without using the adapters, please refer to the specification of
each product.
viii
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
Hearing Damage Warning
Zx.3 Warning
The warning shall be placed on the equipment, or on the packaging, or in the instruction
manual and shall consist of the following:
- the symbol of Figure 1 with a minimum height of 5 mm; and
- the following wording, or similar :
To prevent possible hearing damage, do not listen at high volume levels for long periods.
Alternatively, the entire warning may be given through the equipment display during use, when
the user is asked to acknowledge activation of the higher level.
ix
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
Worldwide Support
unitech’s professional support team is available to quickly answer questions or
assist with technical-related issues. Should an equipment problem occur,
please contact the nearest unitech regional service representative.
For complete contact information please visit the Web sites listed below:
Taipei, Taiwan – Headquarters
Europe
Tel:
+886-2-89121122
Tel:
+31-13-4609292
E-mail:
info@hq.ute.com
E-mail:
info@eu.ute.com
Address:
5F, No. 136, Lane 235, Baoqiao Road, Xindian
Address:
Tilburg, the Netherlands
District, New Taipei City 231, Taiwan (R.O.C.)
Website:
Kapitein Hatterasstraat 19, 5015 BB,
Website:
http://www.ute.com
China
http://eu.ute.com
Japan
Tel:
E-mail:
Address:
Website:
+86-59-2310-9966
info@cn.ute.com
Room401C, 4F, RIHUA International Mansion,
E-mail:
+81-3-35232766
E-mail:
info@jp.ute.com
Address:
Shinkawa, Chuo-Ku,
Xiamen, Fujan , China
Tokyo, 104-0033, Japan
http://cn.ute.com
Website:
http://jp.ute.com
Latin America
+886-2-27911556
Tel:
+52-55-5171-0528
info@apac.ute.com
E-mail:
info@latin.ute.com
info@india.ute.com
Address:
info@mideast.ute.com
Address:
Kayabacho Nagaoka Building 8F.,1-5-19
Xinfeng 3nd Road, Huoju Hi-tech District,
Asia & Pacific / Middle East
Tel:
Tel:
17171 Park Row, Suite 210
Houston, TX 77084USA (Rep.)
4F., No. 236, ShinHu 2nd Rd.,
Website:
http://latin.ute.com
NeiHu Chiu, 114, Taipei,Taiwan
Website:
http://apac.ute.com / http://mideast.ute.com
North America
Tel:
E-mail:
Please scan QR Code to visit us :
+1-714-8916400
info@us.ute.com / info@can.ute.com
Address:
6182 Katella Ave, Cypress, CA 90630, USA
Website:
http://us.ute.com
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
Warranty Policy
The following items covered under the unitech Limited Warranty are free from
defects during normal use:
The warranty period is varied from each country. Please consult with your
supplier or unitech local office for actual length of warranty period to your
purchased product.
Warranty becomes void if equipment is modified, improperly installed or used,
damaged by accident or neglect, or if any parts are improperly installed or
replaced by the user.
xi
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
Table of Contents
Preface............................................................................................................. i
Regulatory Compliance Statements .............................................................. i
Laser Information ......................................................................................... v
LED Information ........................................................................................... v
Battery Notice.............................................................................................. vi
Adapter Notice............................................................................................viii
Hearing Damage Warning ........................................................................... ix
Worldwide Support ....................................................................................... x
Warranty Policy ........................................................................................... xi
Chapter 1 - Overview................................................................................1
1.1 Package .................................................................................................1
1.2 Product Detail.........................................................................................2
1.3 Specifications .........................................................................................5
1.4 Getting Started .......................................................................................8
Chapter 2 – Installation & Operation.................................................14
2.1 Barcode Setting.................................................................................... 14
2.2 HF Setting ............................................................................................ 21
2.3 UHF Setting.......................................................................................... 22
2.4 MSR Setting ......................................................................................... 22
2.5 WWAN Setting...................................................................................... 23
2.6 WLAN Setting....................................................................................... 25
2.7 PAN Setting .......................................................................................... 27
2.8 GPS Setting.......................................................................................... 28
2.9 PC Setting ............................................................................................ 30
2.10 Camera Setting .................................................................................. 31
2.11 Performing a Hardware Reset ............................................................ 34
2.12 Performing Factory data reset ............................................................ 35
2.13 Programmable Keys ........................................................................... 37
2.14 Battery Swap ...................................................................................... 44
xii
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
Chapter 3 – Introduction to Applications.........................................45
3.1 Scan Service ........................................................................................ 45
3.2 File Manager ........................................................................................ 49
3.3 Update Center ...................................................................................... 51
3.4 Sound Recorder ................................................................................... 52
3.5 Push to Talk.......................................................................................... 55
xiii
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
Chapter 1 - Overview
1.1 Package
Please make sure the following contents are in the PA720 gift box.
If something is missing or damaged, please contact your unitech
representative.
The standard package contents




PA720 Terminal
Battery
Hand Strap
Regulatory Compliance Statements
Optional accessories








Single Slot USB Cradle
Single Slot Ethernet Cradle
4 slot Ethernet Cradle
4 slot Terminal Charger
4 slot battery Charger
USB charging and communication cable cap
Plugs + Power Adapter
Stylus
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
1.2 Product Detail
PA720 Front View
Receiver
5 megapixel camera
Back button
Camera button
Microphone
Home screen button
Menu button
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
PA720 Rear View
Barcode scanner window
8 megapixel / Autofocus
camera
Flash LED
Reset button
Knobs
Battery cover
Speaker
Cable / Cradle connector
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
PA720 Left and Right View
Earphone
Jack
Power key
Volume
up/down
Push to talk
Scanner
trigger
button
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
1.3 Specifications
System Features
CPU
MT8735 1.3GHz Qual Core ARM A53 64bit
Memory
3GB Mobile SDRAM
16GB eMMC / MLC Flash
OS
Android 5.1 Lollipop
Languages support
English, Simplified Chinese, Traditional Chinese, Japanese,
Spanish, German, French and multiple languages
Display
Gorilla GlassⅢ with 5-point capacitive touch panel
4.67" Color 450 cd/m2 Brightness 720x1280 dots Color Transmissive type’s TFT
Keypad
4 x Function key
1 x Power key
2 x Scan trigger button
2 x Volume key
1 x Push To Talk key
Indicator
1 x LED Indicator
Vibrator
Symbologies
1D
All major codes
2D
PDF417
(2D is only available when the 2D imager MicroPDF417
is on your device )
Code 128 Emulation
Data Matrix
Data Matrix Inverse
Decode Mirror Images (Data Matrix Only)
Maxicode
QR Code
QR Inverse
MicroQR
Aztec
Aztec Inverse
Han Xin
Han Xin Inverse
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
Engines
1D
SE655 :
Illumination/AIMER : LED 630 ± 30 nm
Optical Resolution : 5 mil (minimum readable bar code
module size)
Scan Repetition Rate : Nominally 50 scans/second
Print Contrast : 20% (minimum print contrast)
Ambient Light Immunity Light Source: 4845(lux) ± 5%
2D
SE4750SR ( LASER AIMER ) :
Sensor Resolution: 1280 x 960 pixels
Field of View: Horizontal: 48°, Vertical: 36.7°
Aiming : 655 nm Laser
Illumination Element: 2 x Warm white LED
Minimum Bar Code Print Contrast : 20%
Ambient Light: Max 107,639 lux (direct sunlight)
Audio
Speaker , 3.5mm Audio Jack, Receiver, Microphone
Regulatory Approvals
CE, RoHS compliance, FCC, NCC, VCCI, TELEC, CCC, SRRC
Communication
USB
USB 2.0
WLAN
IEEE 802.11 a/b/g/n
PAN
Bluetooth 4.1
WWAN
GSM/GPRS/EDGE 850/900/1800/1900 MHz
UMTS 850/900/1900/2100 MHz
LTE FDD Band 1/2/3/5/7/8/20 TDD Band 38/39/40/41
DL: 150Mbps/ UL: 50Mbps
RFID/HF
Frequency: 13.56MHz
Tag Support: ISO15693, ISO14443A , ISO14443B
Support NFC
GPS (Optional, available on WWAN
version)
12 x 12 mm patch antenna
Camera and Flash Light
8MP CMOS sensor rear autofocus camera with LED flash light
5MP front camera
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
External Storage
Support MicroSD memory card up to 32GB
Other Sensors
G-sensor , Light + Proximity sensor , E-Compass
Power Source
Standard Battery
3120mAh / 3.6V, full charge should over 95% capacity
Enclosure
Weight
No Engine Standard Battery: 277g；Double Battery: 307g
1D Engine Standard Battery: 297g；Double Battery: 327g
2D Engine Standard Battery: 307g；Double Battery: 337g
Dimension
1D: Approximately 171.3mm (L) x 25.6mm (H) x 80mm (W)
(Antenna length included)
2D: Approximately 171.3mm (L) x 29.3mm (H) x 80mm (W)
(Antenna length included)
Environmental
Operating temperature
-4°F to 131°F (-20°C to 55°C)
Storage temperature
-22°F to 140°F (-30°C to 60°C)
Charging Temperature
32°F to 113°F (0°C to 45°C)
Relative Humidity
95% ( non-condensing )
Drop test to Concrete
1.2 meter
Environmental Sealing
IP65
Vibration and Shock test
MIL-STD-810G, 514.4 process II
Software
Android 5.1 API level 22
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
1.4 Getting Started
1.4.1 Installing the Battery
1.
2.
3.
4.
To loosen the two knobs on the
battery cover by turning
counterclockwise.
And pull the two knobs up to
remove the battery cover.
knobs
Slide and position the battery
pack, making sure the battery
contacts are aligned with the
contacts in the compartment.
Battery
Compartment
Contacts
Use your thumb to snap the
battery in place.
Plastic Tab
Put back the battery cover.
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
5. To tighten the two knobs on the
battery cover by turning clockwise.
NOTE: After installing the battery, make sure the battery cover is securely closed, or you may
be unable to turn ON the terminal.
WARNING! There is a risk of fire and burns if the battery pack is handled improperly. DO
NOT disassemble, crush, puncture, short external contacts, or dispose the
battery pack in fire or water. DO NOT attempt to open or service the battery pack.
Dispose of used batteries according to local recycling guidelines in your area.
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
1.4.2 Charging the Battery
Before using the terminal for the first time, you need to charge it for about 24
hours. After that, you can charge the terminal for 4 hours to recharge the
battery to full capacity. Charge the terminal using the USB charging cable or
the docking station.
1.
After PA720 is connected to the charging cable, push up the release
buttons on the both sides of the USB charging cable to lock PA720.
2.
Use USB charging cable to connect the AC adapter.
3.
Plug the AC adapter cord into an electrical outlet.
Release Buttons
Push up : Lock
Push down: Unlock
10
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
1.4.3 Turning on the terminal for the first time
After you have initially charged your device for about 24 hours, the device is
ready to be used. You can now start up your device. You can then set up the
languages, WiFi setting, and date and time.
Power-On Button
Turn ON your device by pressing the power button
on the right side of
the terminal.
1.4.4 Checking the LED status
Status
Scan
Terminal Message
Power
LED
Description
Green light blinks once
Successful reading
Blue light blinks
Message received
Solid Red light
Being charged
Solid Green light
Fully charged
Checking the Battery Status
If the battery level becomes low in the course of normal use, a status icon
appears on the device screen indicating low or very low battery status. In both
cases, connect PC with USB to back up your data, and then recharge your
device as soon as possible.
11
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
1.4.5 Using the SD/SIM Card
The PA720 has SD/SIM card slots inside the battery compartment.
Inserting a SD/SIM Card
1.
To loosen the two knobs on the
battery cover by turning
counterclockwise.
And pull the two knobs up to
remove the battery cover.
2.
Remove the battery cover and the
main battery.
3.
Now you can access the SD card
slot and SIM card slot.
Put the battery back into the
battery cover.
12
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
4.
Replace the battery cover.
To tighten the two knobs on the
battery cover by turning clockwise.
Removing the SD/SIM Card
1.
2.
3.
4.
5.
6.
7.
To loosen the two knobs on the battery cover by turning counterclockwise.
Remove the battery cover and the main battery.
Press the card in and release. The card pops out.
Remove the card from the slot.
Put the battery back into the battery cover.
Replace the battery cover.
To tighten the two knobs on the battery cover by turning clockwise.
CAUTION! Before installing the SIM card, please backup your data to prevent data loss
because of a low battery.
13
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
Chapter 2 – Installation &
Operation
2.1 Barcode Setting
1.
Tap
go to APPS, and tap
ScanService.
© 2016 unitech Electronics Co., Ltd. All rights reserved.
14
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
2.
You are now enter the ScanService application:
There are three items appear on the screen : Settings, Test and Version.
￭ Settings
Tap the default barcode
symbologies for a
different application
Tap On / Off to enable / disable to
work in background
Tap Exit to leave ScanService
© 2016 unitech Electronics Co., Ltd. All rights reserved.
15
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
 For Save / Load Settings, and Factory Default section,
Please tap
and then tap Save / Load Settings.
To save settings, please tap Save Settings -- OK
© 2016 unitech Electronics Co., Ltd. All rights reserved.
16
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
The save setting data is stored in File Manager. (Please see 3.2 File Manager )
© 2016 unitech Electronics Co., Ltd. All rights reserved.
17
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
￭ Test
Scanned data
information
Tap Clear :
Clear all
scanned data
① Tap Save to file.
② Choose the path and filename to
save the scanned data.
18
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
￭ Version
Touch and hold anywhere
inside the yellow line area
until the pop up screen
shows up.
To update ScanService,
please tap Update to get
the latest version.
The recent version
of ScanService
© 2016 unitech Electronics Co., Ltd. All rights reserved.
19
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
￭ More Options
For more options and settings, please tap
© 2016 unitech Electronics Co., Ltd. All rights reserved.
20
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
2.2 HF Setting
1.
Tap
go to APPS, and tap
Settings.
2.
Tap More and you will find NFC, and tap to enable / disable NFC.
© 2016 unitech Electronics Co., Ltd. All rights reserved.
21
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
2.3 UHF Setting
Current model is not available.
2.4 MSR Setting
Current model is not available.
22
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
2.5 WWAN Setting
1. Turn off the terminal to insert the SIM card.
Note :  For the instruction, please refer to 1.4.5 Using the Micro SD/SIM Card.
 It only applies to the device which supports WWAN.
2. Turn on the terminal, 4G signal will show at the top of the screen.
2.5.1 Mobile network settings
1.
Tap
go to APPS, and tap
Settings.
© 2016 unitech Electronics Co., Ltd. All rights reserved.
23
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
2.
Go to Wireless & networks, Tap More, and tap Cellular networks.
3.
You can have more Cellular network settings in this section.
For network type, please tap Preferred network type.
© 2016 unitech Electronics Co., Ltd. All rights reserved.
24
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
2.6 WLAN Setting
1.
Tap
go to APPS, and tap
2.
Go to Wireless & networks, Tap Wi-Fi
Settings.
© 2016 unitech Electronics Co., Ltd. All rights reserved.
25
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
3.
To see available networks, turn Wi-Fi ON.
And tap to choose the available networks.
4.
Choose the available networks, and enter the Password and tap Connect.
26
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
2.7 PAN Setting
1.
Tap
go to APPS, and tap
Settings.
2.
Go to Wireless & networks, Tap Bluetooth (PAN)
Tap ON / OFF to enable / disable Bluetooth (PAN).
To pair the available device, turn Bluetooth ON to
choose the available device.
© 2016 unitech Electronics Co., Ltd. All rights reserved.
27
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
2.8 GPS Setting
1.
Tap
go to APPS, and tap
2.
Go to PERSONAL , Tap Location.
Settings.
© 2016 unitech Electronics Co., Ltd. All rights reserved.
28
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
3.
Tap ON/OFF for the permission to use your location information.
4.
Tap Mode for more location mode settings.
￭ High accuracy :
Use GPS, Wi-Fi and cellular networks to
determine location
￭ Battery saving :
Use Wi-Fi and cellular networks to determine
location
￭ Device only :
Use GPS to determine your location
© 2016 unitech Electronics Co., Ltd. All rights reserved.
29
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
2.9 PC Setting
1.
Connect the USB charging cable to the USB port of the PC device.
Release Buttons
Push up : Lock
Push down: Unlock
2.
After connecting the terminal to PC with USB, you can find a removable
storage on my computer.
© 2016 unitech Electronics Co., Ltd. All rights reserved.
30
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
2.10 Camera Setting
1.
Tap
go to APPS, and tap
Camera.
Or use the camera button as below :
31
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
2.
The following are the introduction of the camera interface.
Swipe left / right
Multi angle view mode
for other options
Panorama mode
Motion Track mode
Live photo mode
Normal mode
Slow motion
HDR
Flash Mode
Camera switch
Record / Camera
Settings
© 2016 unitech Electronics Co., Ltd. All rights reserved.
32
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
3.
More options / settings
￭ camera filter effects ( for normal mode only )
Swipe left / right for
other filter effects
￭ Tab
for More settings as below.
Main settings
Camera settings
Video Setting
© 2016 unitech Electronics Co., Ltd. All rights reserved.
33
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
2.11 Performing a Hardware Reset
You may have to perform a reset if the device freezes (i.e., the terminal no
longer responds to the buttons or tapping on the screen).
1.
2.
Use a pin, a paper clip, or tip of a pen.
Lightly press the reset button located on the back side of PA720.
Reset button
3. The terminal will restart the system after you press the reset button.
© 2016 unitech Electronics Co., Ltd. All rights reserved.
34
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
2.12 Performing Factory data reset
1.
Tap
go to APPS, and tap
Settings.
2.
3.
Go to PERSONAL , tap Backup & reset
Go to PERSONAL DATA, tap Factory data reset
© 2016 unitech Electronics Co., Ltd. All rights reserved.
35
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
4.
Tap Reset phone and then tap ERASE EVERYTHING
© 2016 unitech Electronics Co., Ltd. All rights reserved.
36
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
2.13 Programmable Keys
The PA720’s keys can be programmed for users to be able to perform different
functions or applications.
2.13.1 Programming a key
1.
Tap
go to APPS, and tap
Settings.
© 2016 unitech Electronics Co., Ltd. All rights reserved.
37
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
2.
Go to SYSTEM, Tap Programmable keys, and select the keys to remap.
(ex. tab Push toTalk )
3. Tab one of KEYCODES or APPS that lists the available functions or
applications and select one shortcut to map to the key.
(ex. tab VOLUME_UP )
© 2016 unitech Electronics Co., Ltd. All rights reserved.
38
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
4. The key is successfully mapped to a key code.
2.13.2 Enable/ Disable wakeup
After the key is mapped to a key code, check the Enable wakeup checkbox
to wake PA720 by pressing the programmable keys when PA720 is in sleep
mode.
Note: This function only applies to KEYCODES.
© 2016 unitech Electronics Co., Ltd. All rights reserved.
39
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
2.13.3 Export / Import a Programmable Key
Configuration file
￭ Export file
1. Tab
2. Select Export
3. Tab OK
Programmable keys exported successfully
© 2016 unitech Electronics Co., Ltd. All rights reserved.
40
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
The Programmable Key configuration can be exported to a text file or imported
into PA720.
Note: The configuration file (keys_config.txt) is saved in File Manger.
(For File Manager setting, please refer to 3.2 File Manager )
© 2016 unitech Electronics Co., Ltd. All rights reserved.
41
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
￭ Import file
Before importing the file, please make sure the configuration file
(keys_config.txt) is in File Manager.
1. Tab
2. Select Import
3. Tab Ok
Programmable keys imported successfully
The new configuration will be applied immediately after import.
© 2016 unitech Electronics Co., Ltd. All rights reserved.
42
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
Reset default
1. Tab
2. Select Reset to default
43
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
2.14 Battery Swap
Please follow the steps for the battery swap.
1. Long press power botton until you see the pop up window and tap Batt
swap.
2. The LED indicator will start showing solid red light. Please swap the battery
after the LED red light goes off. Make sure do not turn on PA720 during the
battery swap.
3. When the battery swap is done, you can press the power button to restart
PA720.
Note :Please see 1.4.1 Installing the Battery for more information.
© 2016 unitech Electronics Co., Ltd. All rights reserved.
44
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
Chapter 3 – Introduction to
Applications
3.1 Scan Service
1.
Tap
go to APPS, and tap
ScanService.
Note : For more Scan Service settings, please refer to 2.1 Barcode Setting.
© 2016 unitech Electronics Co., Ltd. All rights reserved.
45
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
2.
You are now enter the ScanService application. Tap Test to start
scanning barcodes.
3.
Aim the Barcode Scan Engine to the barcode and press one of two scan
trigger buttons.
Barcode Scan Engine
Scanner
trigger button
© 2016 unitech Electronics Co., Ltd. All rights reserved.
46
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
4.
After scanning the barcodes, the screen will show the barcode
information.
Scanned data
information
Tap Clear :
Clear all
scanned data
①Tap Save to file.
②Choose the path and filename to
save the scanned data.
47
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
￭ More Options
For more options and settings, please tap
￭ Auto Scan
￭ Scan2Key
Setting
￭ Device Option
￭ Save/ Load
Settings
© 2016 unitech Electronics Co., Ltd. All rights reserved.
48
unitech is a registered trademark of unitech Electronics Co., Ltd.
￭ Update
PA720 User’s Manual
3.2 File Manager
1.
2.
Tap
go to APPS, and tap
File Manager.
: File categories
: Search
: Refresh
: View as grid /
Add folder /
Add to bookmark /
Settings /
Manage bookmark
© 2016 unitech Electronics Co., Ltd. All rights reserved.
49
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
3.2.1 Solutions Folder
Tap Internal Storage; tap Solutions on the drop down menu.
Note: The solutions folder is subject to change on different sub-release of OS.
© 2016 unitech Electronics Co., Ltd. All rights reserved.
50
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
3.3 Update Center
1.
Tap
go to APPS, and tap
Update Center.
2.
To update or check the latest version of software and applications, you will
need to do it manually.
Refresh
© 2016 unitech Electronics Co., Ltd. All rights reserved.
51
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
3.4 Sound Recorder
1.
Tap
2.
Recording : Tap red dot to start the sound recording.
Record Button
go to APPS, and tap
Sound Recorder.
Pause
Stop
© 2016 unitech Electronics Co., Ltd. All rights reserved.
52
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
3.
Save files : Tap stop button during the sound recording and choose save.
Tap
to the recording file list.
Save Button
Recording file list
4.
Delete files : Tap
to the recording file list and long press the file you
choose to remove. Tap
file.
and press OK to delete the
53
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
5.
More settings : Tap
￭ Voice quality
for Voice quality / Recording mode.
￭ Recording mode
© 2016 unitech Electronics Co., Ltd. All rights reserved.
54
unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual
3.5 Push to Talk
To operate push to talk, please go to Google Play store
to download
the walkie talkie apps which can support any android device.
For example, Zello PTT Walkie Talkie is the most recommended walkie talkie
app.
Push to Talk
55
© 2016 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : USER
Create Date                     : 2016:08:31 09:51:26+08:00
Modify Date                     : 2016:08:31 10:04:16+08:00
Subject                         : 
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : Acrobat PDFMaker 10.1 Word 版
Metadata Date                   : 2016:08:31 10:04:16+08:00
Producer                        : Acrobat Distiller 10.1.1 (Windows)
Keywords                        : 
Format                          : application/pdf
Creator                         : USER
Title                           : 
Description                     : 
Document ID                     : uuid:24bc6763-f2dd-40f9-a1f9-c9fc53df9a38
Instance ID                     : uuid:87570b0b-ec42-4c60-bd48-f1710ae1eec3
Company                         : 
Comments                        : 
Source Modified                 : D:20160831015021
Page Layout                     : OneColumn
Page Count                      : 70

EXIF Metadata provided by EXIF.tools