Unitech Electronics PA970 PDA W/ GSM/GPRS, WLAN AND BLUETOOTH User Manual USERS MANUAL 3

Download:
Mirror Download [FCC.gov]
Document ID	523558
Application ID	FlhgrnU038qqoETR0HaPhQ==
Document Description	USERS MANUAL 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	229.02kB (2862769 bits)
Date Submitted	2005-03-11 00:00:00
Date Available	2005-03-11 00:00:00
Creation Date	2005-03-07 17:35:36
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2005-03-14 11:33:04
Document Title	Microsoft Word - PA970 prelimiary operation manual-01.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	jennifer

PA970 Operation Manual
2.
Tick “Enable character repeat”.
3.
Adjust the repeat delay and repeat rate.
4. Place the cursor in the field of “Tap here and hold down a key to test”.
5. Press and hold a key on the keypad.
6. You should see the character is repeated until you release the key.
4.7
Mouse
Path: Start/Settings/Control Panel/Mouse
This setting allows you to adjust the tapping sensitivity.
1. Double tap “Mouse”.
Unitech Confidential
PA970 Operation Manual
2. Double tap the grid. Then, double tap the icon to test.
4.8
Network and Dial-up Connection
Path: Start/Settings/Control Panels/Network and Dial-up connection
This setting is to configure the network setting and Dial-up connection.
1. Double tap “Network and Dial-up connection”.
Unitech Confidential
PA970 Operation Manual
2. Follow the steps of 2 onwards in chapter 3.6.
4.9
Owner
Path: /Start/Settings/Control Panel/Owner
This settings is to define the owner of this terminal, set the network ID etc.
1. Double tap “Owner”.
Unitech Confidential
PA970 Operation Manual
2. Key in the name of the owner, company and the address of the company.
Check “Display owner identification”.Tap “OK”. The system will display the
owner identification after suspend.
Unitech Confidential
PA970 Operation Manual
3. Under “Notes”, Key any message and check “Display Owner Notes”.Tap
“OK”. System will display the notes after suspend.
4. Under “Network ID”, specify the user name and password that allow you to
access the network.
Unitech Confidential
PA970 Operation Manual
4.10
Password
Path: Start/Settings/Control Panel/Password
This setting is to protect the terminal from other users to access the windows
by setting a unique password.
1. Double tap “Password”.
2. Key in your password twice. Check “Enable password protection at power
on” and “Enable password protection for screen saver”.
Unitech Confidential
PA970 Operation Manual
3. Warm start your terminal. Enter your password to login.
4.11
PC Connection
Path: /Start/Settings/Control Panel/PC Connection
This setting allows you to set the device name and specify which type of
communications you want to set for the device to communicate with the host.
1. Double tap “PC Connection”.
2. Check “Enable direct connection”. Tap “Change Connection”. Select the
type of communication that you connect the terminal to your host.
Example:
Unitech Confidential
PA970 Operation Manual
If you use RS232 cable, you may select “Desktop@57600” or
“Desktop@38400” .
If you use USB cable, please select “USB to PC”.
4.12
Power
Path: /Start/Settings/Control Panel/Power
This setting is to show the power voltage of the batteries, besides allow you to
suspend the terminal after a time interval to save the power.
1. Double tap “Power”.
Unitech Confidential
PA970 Operation Manual
2. Under “Battery” tab, the screen shows you the status and voltage of main
battery and backup battery.
3. Under “Schemes”, For Power Scheme, select “Battery Power”. Then, define
the idle time for user, system and suspend.
Unitech Confidential
PA970 Operation Manual
4. Change power scheme to “AC Power”. Define the idle time for user, system
and suspend.
5. Tap“Device Status”, the power levels are shown.
Unitech Confidential
PA970 Operation Manual
4.13
Regional Settings
Path: Start/Settings/Control Panel/Regional Settings
This setting is to set the regional settings, currency, date format etc.
1. Double tap “Regional Settings”.
Unitech Confidential
PA970 Operation Manual
2. Under “Region”, select the region you want to use.
3. Under “Number” tab, select the symbol and format you want.
4. Under “Currency”, select the symbol and format you want.
Unitech Confidential
PA970 Operation Manual
5.
Under “Time”, select the time format.
6.
Under “Date”, select the date format.
Unitech Confidential
PA970 Operation Manual
4.14
Remove Program
Path: /Start/Settings/Control Panel/Remove Program
This setting is to allow you to remove unwanted program.
1. Double tap “Remove Program”.
2. Select the program you want to remove. Tap “Remove”.
Unitech Confidential
PA970 Operation Manual
4.15
Stylus
Path: Start/Settings/Control Panel/Stylus
This setting is to set the sensitivity of the tapping and to do the calibration.
1. Double tap “Stylus”.
2. Under “Double Tap”, repeat step 2 in chapter 4.7.
Unitech Confidential
PA970 Operation Manual
3. Under “Calibration”, tap “Recalibrate”. Calibrate the screen using the stylus.
(Please refer to chapter 3.3)
4.16
System
Path : Start/Settings/Control Panel/System
This setting is to show you the general information of the system and allow you
to adjust the size of storage memory and program memory.
1. Double tap “System”.
Unitech Confidential
PA970 Operation Manual
2. System shows the version of the Win CE and the hardware information of
the terminal.
3. Under “Memory”, adjust the size of the memory by using the slider.
Unitech Confidential
PA970 Operation Manual
4. Under “Device Name”, specify the name of the device.
Unitech Confidential
PA970 Operation Manual
4.17
Volume & Sounds
Path: Start/Settings/Control Panel/Volume & Sounds
This setting allows you adjust the volume of the tapping , key clicks, events,
notifications etc. Also, it allows the user to specify the type of sounds for a
special event and set a scheme for the sounds.
1. Double tap “Volume&Sounds”.
2. Adjust the volume and tick the options that you want the sound to apply on.
Unitech Confidential
PA970 Operation Manual
3. To build a new scheme, tap “Save As”.
4. Enter a name for the scheme.
5. Under “Events”, click any events. Select the sounds. Tap the Preview button
to listen to the sounds.
6. To delete an event from the scheme, tap “Delete”.
7. Tap “Save As” to overwrite when you make new change.
Unitech Confidential
PA970 Operation Manual
8. You have a new scheme for sounds. You may select any scheme you want
at anytime.
4.18
Storage Manager
Path: Start/Settings/Control Panel/Storage Manager
Storage manager allows the users to check the information of the CF storage
and format, dismount or make new partition on CF card.
1. Insert CF card into the terminal.
2. Double tap “Storage Manager”.
3. Select the storage disk you want to view. Capacity and sector size are
shown.
Unitech Confidential
PA970 Operation Manual
4. Tap “Format” if you want to format your CF card. Tap “Yes” to confirm to
erase data.
5. Tap “Dismount” to dismount disk.
6. To make a new partition, tap “New” and type in the name of the partition.
Unitech Confidential
PA970 Operation Manual
7. Select a partition, tap “Properties”.
8. Tap “Mount” to mount this partition. Or tap “Dismount” to dismount the
partition.
9. Tap “Format” to format this partition.
Unitech Confidential
PA970 Operation Manual
10. Tap “Scan” to scan this partition. Tap “Start”. After scan completed, tap
“OK”.
11. Tap “Defrag” to defrag this partition. Tap “Start”.
12. Select a partition you want to delete. Tap “Delete”. Tap “Yes”.
(Note: You must “Dismount” the partition before you delete it)
Unitech Confidential
PA970 Operation Manual
Unitech Confidential
PA970 Operation Manual
Chapter 5 Available Function Keys
1. Func + Esc (Calibration)
2. Func + Up Arrow (Screen Backlight)
3. Func + Down Arrow (Keypad Backlight)
4. Func + TAB (Keypad Backlight)
5. Func + 6 (Task Manager)
6. Func + 7 (Scanner Setting)
7. Func + 8 (Power Management)
8. Func + 9 (Device Information)
5.1
Func + Esc
Press Func key and Esc key. Calibration is ready to be executed. Calibrate the
screen by stylus. (Please refer to chapter 3.3)
Unitech Confidential
PA970 Operation Manual
5.2
Func + Up Arrow
Pressing Func key + Up Arrow key will toggle the screen backlight.
5.3
Func + Down Arrow
Pressing Func key and Down Arrow key will toggle keypad backlight.
5.4
Func + TAB
Pressing Func key and TAB key will toggle the keypad backlight.
Unitech Confidential
PA970 Operation Manual
5.5
Func + 6
Pressing Func key and numeric key “6” will execute Task Manager. (Please
refer to chapter 3.20)
Unitech Confidential
PA970 Operation Manual
5.6
Func + 7
Pressing Func key + numeric key “7” will execute scanner settings. (Please
refer to Chapter 2.10)
5.7
Func + 8
Pressing Func key and numeric key “8” will execute power management.
(Please refer to Chapter 4.9)
Unitech Confidential
PA970 Operation Manual
5.8
Func + 9
Pressing Func key and numeric key “9” will show the device information.
(Please refer to chapter 2.3)
Unitech Confidential
PA970 Operation Manual
Chapter 6
6.1
GPRS, WLAN, Bluetooth
GPRS Setup
Execute processes in PA970
1. Start Programs GPRS DialUpGPRS
2. Select `GPRS @ 115200 and Click OK
Unitech Confidential
PA970 Operation Manual
3. GPRS Connected
APN Default is “Internet”, If your network provider don’t use “Internet” as
their APN and you can execute Start Programs GPRS APN Setting to
set APN, then execute process 1~3
Unitech Confidential
PA970 Operation Manual
6.2
WLAN Setup
Execute processes in PA970
1. Start Programs Communication RFPowerON
Unitech Confidential
PA970 Operation Manual
2. Select RF Wireless Card Power ON and Click OK
3. In Wireless Information select AP then setting Wireless Properties
4. Click OK
6.3
BT Setup
Execute processes in PC
1. Click BT Icon in Taskbar and execute Setup Configuration
Unitech Confidential
PA970 Operation Manual
2. In Local Services page, find Bluetooth Serial Port’s COM Port name
Open ActiveSync, Select COM Port that as the same as process 2
Ready for Sync through Bluetooth with PA970
Unitech Confidential
PA970 Operation Manual
Execute processes in PA970
1. Start Programs Bluetooth BTPowerON
Unitech Confidential
PA970 Operation Manual
2. Select Bluetooth Module Power ON and Click OK
3. Start Programs Bluetooth BTActiveSync
Unitech Confidential
PA970 Operation Manual
4. Click BT Icon in Taskbar and Click More
5. Click Inquiry (Inquiry process will spend a few seconds)
6. Select Device then Click OK
Unitech Confidential
PA970 Operation Manual
7. Click BT Icon in Taskbar again
8. Click Sync
Unitech Confidential
PA970 Operation Manual
Chapter 7 FCC Regulation
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This device has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiated radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user‘s authority to operate the equipment.
Unitech Confidential
FCC RF Exposure requirements:
This device is approved as a handheld and hand-operated device only with respect to
RF exposure compliance. This device must operate with a separation distance of at
least 20 cm from a person’s body and must not be co-located or operating in
conjunction with any other antenna or transmitter, expect as evaluated in the grant of
equipment authorization.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2005:03:14 11:33:04+08:00
Create Date                     : 2005:03:07 17:35:36+08:00
Title                           : Microsoft Word - PA970 prelimiary operation manual-01.doc
Author                          : jennifer
Creator                         : PScript5.dll Version 5.2
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Page Count                      : 41
Mod Date                        : 2005:03:14 11:33:04+08:00
Creation Date                   : 2005:03:07 17:35:36+08:00
Metadata Date                   : 2005:03:14 11:33:04+08:00
Has XFA                         : No

EXIF Metadata provided by EXIF.tools