Unitech Enterprise Pa500 Users Manual User's

ENTERPRISE PA500 PA500 Users Manual

PA500 to the manual 24523903-74f3-43f5-9950-a407aca192be

2015-02-02

: Unitech Unitech-Enterprise-Pa500-Users-Manual-452522 unitech-enterprise-pa500-users-manual-452522 unitech pdf

Open the PDF directly: View PDF .
Page Count: 84

Download
Open PDF In Browser	View PDF

unitech

PA500 Enterprise PDA

User’s Manual
400544G

Rev. C

Preface

About This Manual
This manual explains how to install, operate and maintain the PA500 Enterprise PDA.
No part of this publication may be reproduced or used in any form, or by any electrical or
mechanical means, without permission in writing from the manufacturer. This includes
electronic or mechanical means, such as photocopying, recording, or information storage and
retrieval systems. The material in this manual is subject to change without notice.
© Copyright 2007 unitech Electronics Co., Ltd. All rights reserved.
unitech global website address: http:\\www.unitech-adc.com.tw
Bluetooth is a registered trademark of Bluetooth SIG.
Microsoft, Windows and ActiveSync are either registered trademarks or
trademarks of Microsoft Corporation. Other product names mentioned
in this manual may be trademarks or registered trademarks of their
respective companies and are hereby acknowledged.

Battery Notices
This unit is equipped with a battery pack and backup battery. Both batteries will discharge after an extended period
of not being used.

This unit is equipped with a battery pack and backup battery. It is possible that the unitech
PA500
may
not power-on
due recharge
to battery
as ainresult
of fully
storage.
When
both
batteries
are discharged,
thedischarge
unit for 16 hours
order to
charge the main battery and
backup
battery.
There
are
two
ways
to
recharge
PA500:
In the above situation, plug the PA500 to the USB charging cable which is with DC in port or
put the unit into the unitech PA500 USB Docking Station (with 5V/3A AC-DC adapter), and
1. Plug the USB charging cable to the PA500 and plug the 5V/2A AC-DC adapter to the power jack of the USB
recharge the unit for 16 hours in order to fully charge its backup battery.
charging cable.
2.
Place
the PA500
into the
plug the
5V/2Aor
AC-DC
adapter
to the power
of the
docking
The
backup
battery
willdocking
chargestation
from and
external
power
the main
battery
(if thejack
main
battery
still
station.
has enough power to turn on). In the event the main battery is fully charged, refrain from using
the PA500 for 16 hours in order for the main battery to fully charge the backup battery.
For more details, refer to page 6, Charging the PA500.
Backing-up data by backup battery only withut the main battery installed in battery
Ifcompartment
the main battery
is removed,
backup
the data
on SDRAM
is safe for
up protection
to 1 hour. Tofailure
prevent
may
take asthe
long
as 1battery
hour. ensures
Therefore,
in order
to prevent
data
data
do not leave
the PA500
with the
main
batterywithout
removedthe
for rechargeable
an extended period.
due loss,
to backup
battery
failure,uncharged
do not leave
the
PA500
battery pack
installed, or without connection to AC power for an extended period of time.

Battery Charge Notice
It is important to consider the environment temperature whenever you are charging the
Lithium-Ion battery pack. The process is most efficient at normal room temperature or slightly
cooler. It is essential that you charge batteries within the stated range of 0°C to 50°C.
Charging batteries out of the specified range could damage the batteries and shorten their
charging life cycle.

iii

Storage and Safety Notice
Although charged Lithium-Ion batteries may be left unused for several months, their capacity
may be depleted due to build up of internal resistance. If this happens, they will require
recharging before they are used. Lithium-Ion batteries may be stored at temperatures between
-20°C to 60°C, however they may be depleted more rapidly at the high end of this range. It is
recommended to store batteries within the normal room temperature.

RoHS Statement
This device conforms to RoHS (Reduction Of Hazardous
Substances) European Union regulations that set maximum
concentration limits on hazardous materials used in electrical and
electronic equipment.

Table of Contents

Table of Contents
Preface
About This Manual

iii

BatteryNotices ...................................................................................................................... iii
Battery Charge Notice ............................................................................................................ iii
Storage and Safety Notice...................................................................................................... iv
RoHS Statement..................................................................................................................... iv

Chapter 1
Getting Started

Introducing the PA500 ....................................................................................................... 1
Features ................................................................................................................................. 1

Package Contents ............................................................................................................... 2
A Tour of the PA500............................................................................................................ 3
Front View............................................................................................................................... 3
Back View ............................................................................................................................... 4

Setting up the PA500.......................................................................................................... 5
Installing the Battery ............................................................................................................... 5
Charging the PA500 ............................................................................................................... 6
Powering on the PA500 .......................................................................................................... 8

Chapter 2
Using the Hardware

Using the Keypad ................................................................................................................ 9
Using the Stylus ................................................................................................................. 10
Using the SDIO/MMC Slot............................................................................................... 11
Using the Laser Scanner ................................................................................................ 12
Command Interface .......................................................................................................... 14
Today Screen .......................................................................................................................
Start Menu ............................................................................................................................
Navigation Bar ......................................................................................................................
Command Bar.......................................................................................................................
Pop-up Menus ......................................................................................................................
Notifications ..........................................................................................................................

Chapter 3
Getting Connected

14
17
17
18
19
19

Establishing Device-PC Connection .......................................................................... 21
Installing Microsoft ActiveSync ............................................................................................. 21
Connecting the Device to Your Computer ............................................................................ 22

Using ActiveSync .............................................................................................................. 24
Synchronizing Information with Your Computer ................................................................... 24
Using ActiveSync to Exchange Files .................................................................................... 26
Synchronization Options....................................................................................................... 27

Chapter 4
Wireless Communications

Managing Wireless Connections ................................................................................ 28
Using the Wireless Manager................................................................................................. 28

Connectivity Features ...................................................................................................... 29
Beam Function......................................................................................................................
Infrared Connection ..............................................................................................................
Bluetooth Connection ...........................................................................................................
Wi-Fi Connection ..................................................................................................................

29
30
30
34

Connecting to the Internet ............................................................................................. 35

Chapter 5
Managing Programs

Accessing Programs ........................................................................................................ 36
Using the Barcode Scanner Programs ..................................................................... 37
Scan2Key ............................................................................................................................. 37
Scanner Settings .................................................................................................................. 38

Chapter 6
Customizing Your PA500
Adjusting Settings .............................................................................................................
Checking Main and Backup Battery Status ............................................................
Extending Battery Life .....................................................................................................
Adjusting the Backlight Setting ...................................................................................
Resetting the Device ........................................................................................................

41
41
42
43
44
45

Warm Boot............................................................................................................................ 45
Clean Boot ............................................................................................................................ 45
Cold Boot .............................................................................................................................. 46

Viewing Flash ROM Files ................................................................................................
Adding Programs to Your Device ...............................................................................
Adding a Program to the Start Menu .........................................................................
Removing Programs.........................................................................................................

46
46
47
50

Appendix A
System Specifications

Appendix B
Regulatory Compliance Statements

Chapter 1
Getting Started

Introducing the PA500
Thank you for purchasing the PA500 Enterprise PDA. Your PA500 was designed for users who need a
compact and durable portable computer for data collection and real time transactions.

Ultra-rugged Design
The unitech PA500 Enterprise PDA is a compact mobile computing device designed for maximum
durability.

Easy to Use
The unit is equipped with a color display with touch screen, a five-way directional key, and six
application keys. The PA500 supports integrated long range scanners for fast and accurate data
collection.The device also supports infrared interface, bluetooth, and wireless communication
capability for exchanging information in a computing communication system.

Features
Powerful system
•
•

Microsoft Windows Mobile 5.0 operating
system
Intel PXA270 processor with speed of up
to 520 MHz

System memory
•
•

64 MB SDRAM
64 MB Flash ROM

Display
•
•

3.5-inch QVGA LCD touch-sensitive
screen
320 x 240 resolution

Barcode scanner
•
•

Symbol SE950
Hitachi HD6433657W barcode decoder

Wireless connectivity
•
•
•

Communication
•
•
•
•

SDIO/MMC slot

802.11b/g
Bluetooth
Infrared
USB Host & Client

Battery life
•
•
•

RF enabled usage with 50% backlight: 4 hours
Charging time: 3.5 hours
Embedded backup battery cell

User-friendly interface
•

Expansion slot
•

802.11b/g with diversity antenna
Bluetooth
Infrared port

•

Special keys to launch particular
applications and display the on-screen
keyboard
Keys for barcode scanning

Package Contents
After opening the box, ensure the following accessories for the PA500 are present:

PA500 Terminal

Power Adapter*

Stylus

USB charging cable

Stylus with bungee lanyard
(optional)

USB docking station
(optional)

CD-ROM

Quick Reference Guide

Battery Pack

Earphone

Leather case (optional)

* The adapter’s replaceable clip plugs is available, depends on the region.
If anything is missing or appears damaged, contact your dealer.

Chapter 1 Getting Started

A Tour of the PA500
The following sections describe the main components and features of the PA500.

Front View

No.

Component

Description

Barcode laser scanner
(optional)

Reads and captures information on a barcode label.

Status indicator

Indicates
Indicates the
the battery
battery charging
charging and
and barcode
barcode scanning
scanning status.
status.
Green
Battery
is
fully
charged
or
barcode
scanning
• Green - Battery is fully charged, the device is running on
process
completed
withoutscanning
error.
batteryis power,
or barcode
process is completed
Red
Battery
is
charging,
barcode
scanner is
without error.
•fired/activated.
Red - Battery is charging, barcode scanner is activated and
processing.

SDIO/MMC slot

Accepts an SD (Secure Digital), MMC (Multimedia Card) or SDIO
(Secure Digital Input Output) cards, allowing you to add more
memory.
Install add-on applications or use audio text files stored in it for
use with internal applications. You can also use it to backup data
from your device.

Power button

If the device is off, press this button to turn it on.
Alternatively, when the unit is on, this key must be pressed and
held down for about two seconds in order to turn the device off.

LCD touch screen

Displays the applications and data stored on your device. It is
touch-sensitive and responds to the stylus or finger.

Keypad

Includes a software keyboard button, navigation key and
application buttons to launch Microsoft Outlook Mobile programs.

Microphone

Inputs audio into your device when recording the voice notes.

Left scanner trigger
key

Press to activate the barcode laser scanner.

Cord holder

Eyelet for holding the elastic bungee lanyard.

Back View

No.

Component

Description

10.

Speaker

When speaker phone is active,
sounds are emitted here.

11.

Battery release latch

Slide toward the right side of the device and hold firmly,
then detach the battery from its bay.

12.

Reset button

Press the end of the stylus into the button to reset your
device.

13.

Main battery

Removable and rechargeable 3.7 V, 2200 mAh battery
pack.

14.

Universal connector

Connects
your
device
to a USB
cable.
This in
Connects
your
device
to acharging/communication
USB charging cable,
which
USB
connects
thecomputer’s
computer's USB
portport
and accepts
the 5V AC
turncable
connects
to tothe
USB
and through
adapter to provide power to the PA500.
the AC adapter to an electrical outlet. This allows you to
The unit can simultaneously recharge and perform an ActiveSync
rechargeYou
your
perform
an ActiveSync
operation.
candevice
also useand
it to connect
peripheral
hardware, such as
aoperation.
docking station, to your device.
This port can also support USB and RS232 hosting for devices such as
You can also use it to connect a peripheral hardware,
a USB or RS232 scanner, keyboard, or USB memory key.

such as a docking station, to your device.

15.

Earphone jack

Lift the rubber cover from the earphone jack and connect
an audio line-out device (earphone or headphone).

16.

Right scanner trigger key

Press to activate the barcode laser scanner.

17.

Infrared (IR) port

Uses infrared technology to transmit and receive data
from other IR-enabled devices.

18.

Stylus

To use the stylus, remove it from its holder and hold it the
same way as you hold a pen or pencil.

Chapter 1 Getting Started

Setting up the PA500
Perform the following set up tasks to begin using your device:
•
•
•

Install the battery pack
Charge your device
Power on the PA500

Installing the Battery
WARNING! There is a risk of fire and burns if the battery pack is handled
improperly. DO NOT disassemble, crush, puncture, short external
contacts, or dispose the battery pack in fire or water. DO NOT attempt
to open or service the battery pack. Dispose of used batteries
according to the local recycling guidelines in your area.
A backup battery cell is embedded into your device to prevent data loss when the removable battery
pack is removed or completely discharged. The backup battery will keep the data and system settings up
to 1 hour if the main battery is removed.

NOTE:
1.
2.

To enable the internal battery cell to provide backup power supply, charge your device
with the main battery pack for at least three and a half hours.

Position the battery pack, making sure the battery pack fits the shape of the battery
compartment.
Slide the battery pack into the battery bay. The battery pack locks to the chassis with an audible
click.

3. If you remove the main battery and plug it back before the backup battery lost
power, PA500 will be warm start.
4. If you remove the main battery and plug it back after the backup battery lost power,
PA500 will be clean booted.

Charging the PA500
For initial use, you need to charge your device for about 16 hours. After that, you can charge it
everyday to recharge the battery to full capacity. You can charge your device using the USB charging
cable or the docking station.

CAUTION! Operating the PA500 for the first time without the AC adapter, and
without fully charging the backup battery may result in loss of data
stored in RAM memory.
NOTE:

Data you entered may not be properly stored until the internal backup battery has been
fully charged.

To charge the device using the USB charging cable:
1.
2.
3.
4.

Attach the clip plug to the AC adapter, if necessary. Slide the replaceable clip plug into the AC
adapter until it locks into place with an audible click.
Press and hold the connector button on the USB charging cable and connect it to the PA500
(1).
Plug the AC adapter cable into the power jack on the USB charging cable (2).
Connect the AC adapter into an electrical outlet (3).

Chapter 1 Getting Started
To charge the device using the docking station:
1.
2.
3.

Plug the AC adapter cable into the power jack on the docking station.
Plug the AC adapter into an electrical outlet.
Slide the device into the docking station until it clicks into place.

The connection is secure when the bottom edge of the device is aligned smoothly with the
docking station, and the LED indicator on the docking station and device lights up red.
LED status during charging:
– Solid red: Charging
– Solid green: Charging complete
If the battery level becomes low , a status icon appears on the
status. In both cases, perform an
device screen indicating low
or very low battery
ActiveSync operation to back up your data, then recharge your device as soon as possible.
IfIf the
status,
thethe
device
willwill
enter
sleep
mode;
if the
battery
level
the battery
battery level
level reaches
reaches low
a low
status,
device
enter
a sleep
mode
and
cannot
be
reaches
low the
status,
the device
will enter
deepMobile
sleep mode.
In thiswill
case,
youinstalled
have about
poweredvery
up until
battery
is charged.
Windows
5.0 devices
retain
72
hours to recharge
afterbattery
which is
you
risk losingdrained
all datafor
onextended
your device’s
internal
applications
and datayour
whendevice
the main
completely
periods
of
memory.
time.

Powering On the PA500
After you have initially charged your device for about 16 hours, the device is ready to be used. You can
now start up your device where you can calibrate the screen, set up the system time zone, and learn some
basic stylus usage.
1.

Turn on your device by pressing the Power button

NOTE:

on the front panel.

The PA500 screen ships with a protective plastic film. You may remove it by peeling
from one corner. The screen will be more susceptible to scratching without
the film, but will be more readable.

The unitech PA500 welcome screen appears. The Windows Mobile screen will appear shortly.
2.

3.
4.

Calibrate the PA500
The calibrate screen will automatically appear when the unit is powered-on for the first time or
after the system is reset. This screen can also be accessed at any time by tapping Start →
Settings → System tab → Screen.
The PA500 will prompt you to calibrate the unit by tapping a sequence of screen locations. Tap
gently but firmly. When you have completed the series of taps, press the Enter button to confirm
it.
Set the Time Zone, Date, and Time
Select your current time zone from the Time zone drop-down menu, then tap Next.
Follow all onscreen instructions to complete the set up. The setup wizard provides tips for using
the pop-up menus and assign a lock password to access your device.
After the device setup, you can create an ActiveSync partnership to synchronize information
between your computer and your device. See Establishing Device-PC Connection on page 21
for detailed instructions.

Chapter 2
Using the Hardware
Using the Keypad
The PA500 keypad has a navigation key and six special keys to launch particular applications and
display the on-screen keyboard.

No.

Component

Icon

Description

Software keyboard
button

Press to launch the on-screen keyboard.

Notes button

Press to open Notes. Notes allows you to quickly record
information, reminders, ideas, drawings, and phone numbers.
You can create a written note or include a recording in a note.

Enter button

Press the Enter button, center of the navigation key, to
access the menu options and confirm your selection.

Navigation key

Use the up, down, left, and right arrow keys to navigate
through the menu options.

Email button

Launch Microsoft Outlook Express.

Today button

Customize the layout and information that is displayed on the
Today screen.

Calendar button

Press to bring up Calendar. Calendar enables you to
conveniently manage your schedules and appointments or
any other activities associated with date and time.

Tasks button

Keep track of what you have to do and prioritize them based
on their severity and urgency.

Using the Stylus
CAUTION! Never use anything other than PA500 stylus on the screen, otherwise
this could cause a permanent damage.
1. Push the stylus in the direction of the arrow, then pull out to remove the stylus from its holder.

2.
3.
4.

Hold the stylus like holding a pencil.
To make a choice from a menu, lightly tap the tip of the stylus on that choice.
To write data into a field on a form, use the stylus to print the letters or numbers(of on-screen keyboard).
Use very light pressure.

Chapter 2 Using the Hardware

Using the SDIO/MMC Slot
Your device has an expansion slot compatible with a range of SD, SDIO, and MMC storage cards,
which are primarily used to back up or transfer files and data.

To insert a storage card:
1.

Hold the device securely, then lift the rubber cover from the SDIO/MMC slot

Push the card into the slot until you feel the SD card click into place, this will signal that the card
is already properly seated in the slot.

The card is secure when it is not protruding from the slot.

To remove a storage card:
1.

Hold the device securely. Push the card in and release. The card pops out.

Remove the card from the slot.

Using the Laser Scanner
PA500 has an integrated laser scanner which reads all major barcode labels with excellent
performance.

NOTE:

The reading software must be enabled in order to operate the scanner. This can be a
user-loaded application or a pre-loaded utility such as Scanner Settings or Scan2Key.

To scan a barcode:
1.

Launch the Scanner Settings application.
a. Tap Start → Settings.
b. On the System tab, tap Scanner Settings.
In the Scanner Control Panel screen, you can configure barcode scanner parameters such
as enabling or disabling barcode symbologies, setting data transmission options,
configuring magnetic and proximity reading options, and setting power management
options.

c. On the Settings tab, tap Barcode IDs.

Chapter 2 Using the Hardware
d. Tap the Test tab.

2.
3.

Press either one of the scanner trigger keys on the device.
Aim the laser scanner at the selected barcode and press both trigger keys to scan. The
scanned barcode data appears on the screen.

On the Scanner Control Panel screen, tap ok to exit

Command Interface
The following section explains the PA500 command interface.

Today Screen
When you turn on your device for the first time each day or after a preset period of inactivity, you’ll see
the Today screen.It provides an at-a-glance view of the important reminders and details.

To display the Today screen:
When viewing another screen, you can do either of the following:
•
•

Tap Start → Today.
Press the Today button on the device’s front panel.

Chapter 2 Using the Hardware
To define a preset period of inactivity after which the Today screen is displayed:
1.

Tap Start → Settings.

On the Personal tab, tap Today.

On the Items tab, select the “Today timeout” check box.

4. Select the timeout period beside the check box to set the period of inactivity.

Tap ok.

Chapter 2 Using the Hardware
Start Menu
The Start menu displays a list of active programs, as well as options to view the Programs, Settings and
Help screens etc.

Navigation Bar
The navigation bar is located at the top of the screen. It displays the notification icons for system alarms and
reminders, status icons for the data connectivity, battery charge, and volume control.

Status Icons
The table below describes some of the status icons you may see on your device.
Status Icon

Description
Turns all sounds on and off.
Indicates Bluetooth wireless technology is on.
Indicates that the main battery is charging. The PA500 is either plugged-in via the
AC adapter or docking station.
Indicates the main battery is fully charged.
Indicates the main battery is low and needs to be charged.
Indicates the main battery is very low. Stop device operation and charge the
device immediately.
Indicates the backup battery is very low. Stop device operation and charge the
device immediately.
Indicates device is synchronized with a computer.
Wireless and Bluetooth connection is activated.

For more detailed description of the status icons, tap Start → Help.

Command Bar
Use the command bar at the bottom of the screen to perform tasks in programs.

The command bar includes menu names, buttons, and the Input Selector button.

•

To create a new item in the current program, tap New.

•

To view a notification or an image file received on your device, tap View.

•

To see the name of a button, tap and hold the stylus on the button. Drag the stylus off the button so that the
command is not carried out.

•

To view the soft keyboard, tap the Input Selector button

or you can press the Software keyboard button.

Chapter 2 Using the Hardware
Pop-up Menus
With pop-up menus, you can quickly choose an action for an item. The actions in the pop-up menus
vary from program to program.

To display a pop-up menu:
1.
2.

Tap and hold the stylus on the item that you want to perform the action on.
When the menu appears, lift the stylus, then do either of the following:
– Tap the action you want to perform.
– Tap anywhere outside the menu to close the menu without performing an action.

Notifications
Your device will remind you when you have something to do or receive a message.
For example, if you’ve set up an appointment in Calendar, a task with a due date in Tasks, data or
message received, or an alarm in Clock; you’ll be notified in any of the following ways:
•

A message box appears on the screen.

•

A sound(which you can specify) is played.

To choose reminder types and sounds for your device:
1.

Tap Start → Settings.

2.
3.
4.

On the Personal tab, tap Sounds & Notifications.
On the Sounds tab, select the kind of events you want to be notified of.
On the Notifications tab, select the manner of notification you prefer. The options you choose
here are applied globally in your device.
Tap ok.

Chapter 3
Getting Connected

Establishing Device-PC Connection
Installing Microsoft ActiveSync
In order to exchange data between your computer and the PA500, Microsoft ActiveSync must be
installed on your computer. Use the USB charging cable that comes with your device or cradle to
connect the device to your computer.

NOTE:

The PA500 Enterprise PDA requires ActiveSync version 4.2 or higher.

System installation requirements
•

•

•
•
•
•
•

Microsoft Windows 2000 SP4, Server® 2003 SP1, Server 2003 SP1 for titanium-based
systems, Server 2003 Standard x64 Edition, XP® Media Center Edition, XP Professional x64
Edition, XP SP1, XP SP2, XP Tablet Edition
Microsoft Outlook® 2000, Microsoft Outlook XP, or Microsoft Outlook® 2003 (recommended)
messaging and collaboration clients required for Microsoft Outlook Office Mobile
synchronization
Microsoft Office 2000, Microsoft Office XP or Microsoft Office 2003 for Microsoft Office Mobile®
synchronization
Microsoft Internet Explorer 6.0 or later for Internet Explorer Mobile favorites synchronization
Microsoft Systems Management Server 2.0
Hard disk drive with 7 MB of available hard disk space (actual requirements may vary based on
selected features and user’s current system configuration)
USB port, Bluetooth, or infrared connection

To install Microsoft ActiveSync on your computer:
1.
2.
3.
4.

Close any open programs, including those that run at startup, and disable any virus-scanning
software.
Download the ActiveSync software from the Microsoft ActiveSync Download page at
http://www.microsoft.com.
Browse to the location of the downloaded file, and double-click it.
The installation wizard begins.
Follow the instructions on the screen to install Microsoft ActiveSync.
After you have installed ActiveSync and restarted your computer, the ActiveSync icon will
appear on your computer’s system tray (on the lower right-hand corner of the screen) and the
ActiveSync wizard appears.
For detailed information on how to use ActiveSync on your computer, start ActiveSync, then
click Help → Microsoft ActiveSync Help.

Connecting the Device to Your Computer
1.
2.

3.
4.

After ActiveSync has been installed, connect the USB charging cable to your device. If
necessary, connect an adapter.
Plug the other end of the USB charging cable into a USB port on your computer.

Turn the device on.
ActiveSync should start automatically and recognize your PA500 and configure the USB port.
The New Partnership setup wizard will automatically start.

NOTE:

If ActiveSync doesn’t start automatically, click Start → Programs → Microsoft
ActiveSync.
If a message appears indicating that it is unable to detect a connection, click the
Cancel button and manually configure the communication settings.

Follow the onscreen instructions.

Chapter 3 Getting Connected
6.

When the configuration process is complete, the ActiveSync window appears on your
computer, while the Data connectivity icon

appears on your device’s navigation bar.

Synchronization will be initialized and will take place if you have chosen to synchronize
periodically or upon connection via several options — via USB charging cable, infraRed, or
Bluetooth connections.

NOTE:

Your computer can create a partnership with multiple Enterprise PDA. Also, the PA500
can create a partnership with up to two computers.

Using ActiveSync
You can use ActiveSync to synchronize information between your PA500 and your computer so you
always have the most up-to-date information wherever your are.

Synchronizing Information with Your Computer
ActiveSync supports the following connection options between your device and your computer:
•
•
•

USB connection - using the USB charging cable. This connection is established when you have
created an ActiveSync partnership with your computer.
Infrared connection - ideal for quickly switching between multiple devices since cables or
adapters are not required.
Bluetooth connection - applicable only if your computer is equipped with a Bluetooth adapter or
access point.

To setup a USB ActiveSync connection:
1.
2.
3.
4.
5.
6.

Open ActiveSync on your computer.
Click File → Connection Settings.
Select the “Allow USB connections” check box.
Click OK.
Open ActiveSync on your device.
Tap Menu → Connections.

7.
8.
9.
10.

Select the “Synchronize all PCs using this connection” check box.
Select USB.
Tap ok.
Connect your device to your computer using the USB charging cable. Synchronization is
automatically initiated.

To setup an Infrared ActiveSync connection:
1.
2.
3.
4.
5.

Configure the infrared port on your computer. Refer to the computer’s documentation for
instructions.
Once your computer’s IR port is ready, open ActiveSync on your computer.
Click File → Connection Settings.
On the “Allow connections to one of the following” list, select Infrared Port (IR).
Click OK.

Chapter 3 Getting Connected
6.
7.
8.

Align the IR port of your device with the IR port on your computer.
Open ActiveSync on your device.
Tap Menu → Connect via IR.

To setup a Bluetooth ActiveSync connection:
Your device is equipped with Bluetooth wireless technology that you can use to synchronize information
with a computer equipped with a Bluetooth adapter or access point. Bluetooth wireless technology
allows you to communicate with the computer whenever it is within the range.
1.
2.
3.
4.

5.
6.
7.

Configure the Bluetooth connection on your computer. Refer to the Windows Online Help for
instructions.
Ensure Bluetooth is turned on your computer and detectable and within a close range.
Make your device detectable to your PC by tapping Start → Settings → Connections tab →
Bluetooth.
On the Mode tab, select the check boxes for the “Turn on Bluetooth” and “Make this device
discoverable to other devices” check box.

Tap ok.
On your device, tap Start → Programs → ActiveSync.
Tap Menu → Connect via Bluetooth.
If authentication is required, the Enter Passcode screen appears, type an alphanumeric
passkey (PIN code), then tap Next; enter the same passkey on the computer.
If you do not want to use a passkey, tap Next.

8. Select service. Check “Activesync”. Tap “Finish”.
9. To preserve battery power, be sure to end the bluetooth activesync connection when
synchronizing is complete. Tap “OK”.
10. From /start/Program, double tap “Activesync”.
11. Tap “Menu” at bottom right corner. Select “Connect via Bluetooth”.
Terminal connects to the PC via Bluetooth Activesync.

Using ActiveSync to Exchange Files
You can use ActiveSync to exchange information from your device to your computer and vice versa.
Changes you made to the information on one location will not affect the information on the other one. If
you want to automatically update information on both your device and computer, synchronize the
information instead.
You can copy two types of information to your device: files and Pocket Access Windows CE Store
information.
The procedure below only applies to copying files. Refer to the ActiveSync Help on your computer for
instructions on how to copy Pocket Access Windows CE Store information.

NOTE:

Files created on your computer may need to be converted by ActiveSync so that they
can be viewed and edited on your device and vice versa.

To copy files:
1.
2.

Connect your device to your computer.
In ActiveSync on your computer, click Explore.

Windows Explorer opens the Mobile Device window for your device.

3.
4.

Locate the file that you want to copy on your device or computer.
Do either one of the following:
– To copy the file to your device, right-click the file and click Copy. Place the cursor in the
desired folder for your device, right-click, then click Paste.
– To copy the file to your computer, right-click the file and click Copy. Place the cursor in the
desired folder for your computer, right click, then click Paste.

Chapter 3 Getting Connected
Synchronization Options
By default, ActiveSync only synchronize information for Contacts, Calendar, Messaging (Outlook
E-Mail), Tasks, and Favorites (for Internet Explorer Mobile). You can select which information types are
synchronized. You can also control how much information is synchronized. To illustrate, when
synchronizing Calendar, you can set ActiveSync to synchronize appointments within a certain date
range and for specific categories only. For example business appointments from the past two weeks
only.

NOTE:

ActiveSync does not support synchronizing subfolders in Calendar and Contacts.

To select the type of information to synchronize:
NOTE:
1.
2.
3.
4.
5.

If you decide to synchonize files, for example, Word documents, ActiveSync need to
convert these files. Converted files may not contain all information found in the original file.

Connect your device to your computer.
Click Tools → Options.
Select the information type that you want to synchronize.
If available, click Settings, then select the options you want.
Repeat steps 2 and 3 for each information type.

Chapter 4
Wireless Communications

Managing Wireless Connections
Using the Wireless Manager
The Wireless Manager provides easy management to the wireless features on your device. This
program complements your device’s integrated wireless card and enabling you to turn the wireless features
on and off and allows for centralized management of the Wi-Fi and Bluetooth settings.

To open Wireless Manager:
Do any of the following:
•

On the Today screen, tap Wireless Manager.

Tap to launch
Wireless Manager.

•
•

On the navigation bar, tap the Data connectivity icon
, then tap Wireless Manager from the
Connectivity drop-down box.
Tap Start → Settings → Connections tab → Wireless Manager.

To activate wireless features
You can use Wireless Manager to turn the Wi-Fi and Bluetooth features on and off — one at a time or
all at the same time.
•
•
•

To turn multiple wireless features on, open Wireless Manager, then tap All → Done.
To activate Bluetooth via the Wireless Manager, tap Bluetooth → Done.
To activate Wi-Fi via the Wireless Manager, tap Wi-Fi → Done.

Chapter 4 Wireless Communications

Connectivity Features
You can use your device to exchange information with other mobile devices and connect to your
computer, a network, or the Internet. You have the following options:
•
•

Use the infrared sensor or Bluetooth function to exchange files from another IR- or Bluetoothenabled device.
Use Wi-Fi connection to send and receive email messages by using Messaging and view Web
pages by using Internet Explorer Mobile.

Beam Function
In a Microsoft Windows Mobile program (except Messaging) and Picture & Videos, you can exchange
files using either infrared or Bluetooth.

NOTE:

You can also beam files (not folders) from the File Explorer screen. To do so, tap and
hold the item you want to send, then tap Beam File from the pop-up menu.

You need to first activate the beam function before you can begin exchanging files with another IR- or
Bluetooth-enabled device.

To activate the Beam function:
1.
2.
3.

Tap Start → Settings.
On the Connections tab, tap Beam.
Tap “Receive all incoming beams” check box.

Tap ok.

Infrared Connection
Using infrared, you can enable short-range file exchange between your device and another IR-enabled
device.

To exchange files using IR connection:
1.
2.
3.
4.
5.

Ensure that the IR function on both your PA500 and on other device(which you want to exchange files
with) are turned on.
Locate the item you want to send.
Align the IR port of your device with the IR port of the IR-enabled device, so that they are unobstructed
and within a close range.
Tap and hold the item, then tap Beam [type of item] on the pop-up menu.
Tap the device that you want to send the file to.

To receive files via IR connection:
1.
2.
3.

Align the IR port of your device with the IR port of the IR-enabled device, so that they are unobstructed
and within a close range.
Send the file from the other IR-enabled device.
On the Receiving Data callout, tap Yes.

Bluetooth Connection
Your device allows you to connect to any Bluetooth-enabled device in your personal area network
(PAN). Once connected, you can send and receive files to another Bluetooth-enabled device, locate and
use any of the services available on the Bluetooth-enabled device you are connected to.

To setup a Bluetooth connection:
1.

Activate the Bluetooth function.
You have two options to activate your device’s Bluetooth connection using the Wireless
Manager or the Bluetooth option under the Settings → Connections preferences. Once
activated, Bluetooth connection is indicated as "On" in the Wireless Manager section of the Today
screen.
– To activate Bluetooth via the Wireless Manager, see “Using the Wireless Manager” on page
28.
– To activate Bluetooth using the Settings option:
a. Tap Start → Settings.
b. On the Connections tab, tap Bluetooth.

Chapter 4 Wireless Communications
c. On the Mode tab, select all check boxes.

Tap ok.

NOTE:
3.

Deactivate the Bluetooth function when you do not plan to use it for an extended time.

Create a Bluetooth partnership.
You need to create a Bluetooth partnership with another Bluetooth-enabled device in order to
exchange the information.
a. On the Bluetooth settings screen, tap the Devices tab.

b. Tap New Partnership. Your device search for Bluetooth-enabled devices on your PAN
and displays them in the device's list.

c. Tap the name of the device in the list, then tap Next.
If you want to use a passcode, type an alphanumeric passkey, then tap Next; enter
the same passkey on the other device.
The passkey is recommended for enhanced security. Your passkey must be between 1 to
16 alphanumeric characters.
If you do not want to use a passkey, tap Next.

Chapter 4 Wireless Communications
d. On the Partnership Settings screen, type in a device name and select the type of services
you want to enable for the Bluetooth partnership.

e. Tap Finish.
f. On the Bluetooth screen, tap the COM Ports tab.
g. To connect to a device, tap New Outgoing Port.
h. To allow other devices to connect to your device, tap New Incoming Port.
i. Select the device you want to add, then tap Next.
j. Select a numbered COM port from the list.
k. Select “Secure Connection” check box to designate the COM port for Bluetooth partnership.
l. Tap Finish.
m. Tap ok.

To send files via Bluetooth:
1.
2.

Locate the item you want to send.
Do any one of the following:
– Tap and hold the item, and then tap Beam Task on the pop-up menu.
– Using Pictures & Videos, tap and hold a thumbnail to display a pop-up menu of available
actions, then tap Beam.
– Using File Explorer, tap and hold an item (but not folders), select Beam File on the pop-up
menu.

3.
4.

Select the Bluetooth device, then tap Tap to send.
Tap ok.

To receive files via Bluetooth:
1.
2.
3.

Turn on the Bluetooth function.
Send the file from the other bluetooth device.
On the Bluetooth callout, tap Yes.
For detailed information on how to use Bluetooth, tap Start → Help.

Wi-Fi Connection
Windows Mobile can support TCP/IP protocol, so the user can easily connect to the Internet by modem
or high-frequency wireless LAN technology. Wi-Fi networks look and operate similarly to Ethernet
networks. The only difference is that a radio transmission replaces the hard-wire connection between
the various nodes. This means all of your existing applications that currently operate over Ethernet will
also function utilizing WLAN without any special wireless network software.
With PA500 integrated Wi-Fi, you can scan for existing wireless network access point or hot spot.
Wireless network access point or hot spot can be found in homes and offices or public areas such as
inside the airport, restaurant, coffee shops, hotels, subway stations, or campus. Using Wi-Fi
networking, you can connect to a computer, access the Internet, send and receive email and files.
A wireless network can be added either when the network is detected or by manually entering settings
information. Wi-Fi access in some areas may require a separate purchase of a service contract with a
wireless service provider. You can check with a Wi-Fi service provider for detailed information.

NOTE:

Before doing these steps, you must do the following:

• Make sure your computer have TCP/IP installed.
• Make sure the network system and remote access server in your workplace
supports TCP/IP.

• Make sure you have remote access account. Ask your network administrator for
assistance on setting up a wireless connection.
• at the bottom of the screen.
1. Tap the RF icon

To set up a wireless network connection:
NOTE:
1.

Before doing these steps, determine if authentication information is needed.

Activate wireless connection.
You have two options to activate your device’s wireless connection using the Wireless Manager
or the Network Cards option under the Settings → Connections preferences. Once activated,
Wi-Fi connection is indicated as On in the Wireless Manager section of the Today screen.
– To activate Wi-Fi connection via the Wireless Manager, see “Using the Wireless Manager” on
page 28.

– To activate Wi-Fi connection using the Settings option:
2. A selection menu pop up.
a. Tap Start → Settings.
Select “Enable Wireless”.
b. On the Connections tab, tap Network Cards.
c. Tap the Wireless tab.

3. Once the RF card is detected, a dialog pop up.
4. Select a network SSID to connect to.
Select one of the network. Tap “OK”

Chapter 4 Wireless Communications
d.“The
If there
are networks
already detected, tap and hold network name, then select Connect.
5. Select
internet”.
Tap “Connect”.
If none, tap Add New and follow all onscreen instructions.
e. Under the Network to access drop-down menu, select from the following network
connection options:
— All available
— Only access points
Only computer-to-computer
6. Enter the—
network
key. Tap “Connect”.
f. When finished, tap OK.
To configure the wireless network connection settings, tap Start → Settings →
Connections tab → Network Cards. For more information on how to configure the
wireless network settings, tap Start → Help.

7. Icon
turn to double
arrow, indicate
that the
To
connect
to a wireless
network:

RF connection is running.
1. Tap Start → Settings.
tapconnection,
Network Cards.
8. If2.youOn
dothe
notConnections
need to use tab,
the RF
the Wireless
you3.canTap
repeat
step 1 ~2 tab.
and select “Disable Wireless”.
4. On the command bar, tap Connect.
5. If a wireless network is connected, a “New Network Detected” callout appears.
6. Tap Connect.

For more information on how to connect to a wireless network, tap Start → Help.

Connecting to the Internet
After configuring your device’s wireless setting, you can now define the network settings you will be using
to access the Internet, connect to your office network and view intranet URLs.
Once you have established these network settings, use Internet Explorer Mobile to view Internet and
intranet sites.

Chapter 5
Managing Programs

Accessing Programs
Your PA500 supports a variety of PDA and wireless communication programs to help you manage both
personal and work-related information.

To open a Program:

•

Tap a program name from the Start menu.

•

Tap Start → Programs, then tap a program icon.
You can select which programs are displayed on the Start menu. For instructions, see “Adding a
Program to the Start Menu” on page 47.

Chapter 5 Managing Programs

Using the Barcode Scanner Programs
Scan2Key
The Scan2Key application routes input from a scanner port to a keypad buffer.
Using Scan2Key, scanned data can be directly input into scanner port aware application,
like Word Mobile.

To open Scan2Key:
1.

Tap Start → Programs.

Tap Scan2Key. Scan2Key appears as an icon on lower right corner of the Today screen.

To exit Scan2Key:
1.

On the Today screen, tap and hold the Scan2Key icon, then tap Exit on the pop-up menu. The
Quit Scan2Key dialog box appears.

Tap Yes.

Scanner Settings
When it is necessary to change the default barcode symbology for a different application, the Scanner
Control Panel provides the ability to change default symbology. The Scanner Control Panel also lets
you place delimiter characters behind scanned data and save the settings.

To view the default barcode symbologies:
1.
2.

Tap Start → Settings.
On the System tab, tap Scanner Settings.

Chapter 5 Managing Programs
To view the default barcode symbologies:
1.
2.
3.

Tap Start → Settings.
On the System tab, tap Scanner Settings.
On the Settings tab, tap the plus sign in front of Barcode Symbologies to expand and display
the list of barcode symbologies.

Below table lists the standard protocol for a particular type of barcode symbology.
Symbology

Enable/ Check
Transmit Transmit
Disable Char/Digit Check
Leading
verification Char/
Char/
Digit
Digit
Bookland EAN YES
—
—
—
Codabar
YES
YES
YES
YES

Transmit Other
Leading
Digit
—
—

Code 11

YES

—

YES

—

Code 128
Code 32
(Pharmacy
Code)
Code 39

YES
YES

—
—

—
YES

YES

Code 93
Delta Code
EAN 128

YES
YES
YES

—
YES
—

—
—
—

EAN 13
EAN 8

YES
YES

—
—

YES
YES

—
—

YES
YES

—
CLSI format,
3 to 48 data length
2 check digits,
1 to 48 data length
1 to 64 data length
Transmit tailing digit

Full ASCII,
Function Code,
0 to 48 data length,
Double labels
decoding,
Double labels
separator
1 to 48 data length
—
Transmit Code ID,
Field separator
—
—

Symbology

Enable/ Check
Transmit Transmit
Disable Char/Digit Check
Leading
verification Char/
Digit
Digit
YES
YES
YES
—

Transmit Other
Leading
Digit

YES

—

YES

—

YES

—

YES

—

Standard 2
of 5/Toshiba
(China Postal
Code) Group
Telepen

YES

—

YES

—

UPC A
UPC E

YES
YES

—
—

YES
YES

—
—

YES
YES

UPC/EAN
Group

—

Interleaved
2 of 5

Label Code
IV&V
MSI/Plessey

—

Fixed Length,
Not suppress start or
stop digit,
10 to 64 data length
—
Check digit double
module 10,
1 to 16 data length
Fixed Length,
4 to 48 data length

Standard
character set
Zero Expansion,
NSC
Supplement 2,
Supplement 5,
Insert Space before
supplement,
Must have
supplement,
Add-on code try level

Chapter 6
Customizing Your PA500

Adjusting Settings
You can adjust the settings of your device to fit the way you work. Certain settings, such as
backlight, auto power off timer, system volume and processor speed can be adjusted.

To access Settings:
Tap Start → Settings.

Checking Main and Backup Battery Status
View power level for both the main and backup battery. To minimize power consumption, you can define
settings for the auto-off function and the processor’s operation speed.

To check the main and backup battery status:
1.
2.

Tap Start → Settings.
On the System tab, tap Power.

Do either of the following:
– If the Plug
or Battery
Power settings screen.

icon appears on your device, double-tap the icon to bring the

– Tap Start > Settings > System tab > Power.
4.

The battery tab will show the status of the main and backup batteries. There are four kinds of
status icons, Good , Low , and Very Low
or , that may appear on the top of the Today
screen to indicate main battery or backup battery status. For more information on the battery
status icons, see page 17.

NOTE:

It is necessary to charge the main battery when the Low

is displayed. To prevent

data loss, replace or recharge the device when the Very Low
or
status icons are
displayed. If both icons are still displayed after charging, please contact unitech
Technical Support.

Chapter 6 Customizing Your PA500

Extending Battery Life
You can save your device’s battery life by doing either of the following:
•
•

Change the automatic power settings
Minimize the use of backlight

To change the Automatic Power Settings:
The PA500 will enter idle mode when there is no task, or all tasks are waiting for input. In default
setting, the PA500 will automatically turn itself off if it remains idle for 3 minutes and when there is no
external charging power applied. Pressing the power button will return the PA500 to the same point at
the time of automatic shutdown.
1.
2.
3.
4.

Tap Start → Settings.
On the System tab, tap Power.
Tap the Advanced tab.
Tap the “On battery power turn off device if not used for” check box and change the amount of
time before the unit turns off the backlight while running in battery power mode.

This function can also be activated when the PA500 is plugged into the power adapter or placed
in its docking station. On the Advanced tab, tap the “On external power turn off device if not
used for” check box and change the amount of time before the unit turns off the backlight while
running in external power mode.

Adjusting the Backlight Setting
The power consumption of the LCD backlight is high, turn off the backlight function if it is not necessary.

To adjust the Backlight setting:
1.
2.
3.

Tap Start → Settings.
On the System tab, tap Backlight.
On the Battery Power tab, do either of the following:
– Tap the “Turn off backlight if device is not used for” check box and change the amount of
time before the unit turns off the backlight while running in battery power mode.
– Tap “Turn on backlight when button is pressed or the screen is tapped” check box.

On the External Power tab, do either of the following:
– Tap the “Turn off backlight if device is not used” check box and change the amount of time
before the unit turns off the backlight while running in external power mode.
– Tap the “Turn on backlight when a button is pressed or the screen is tapped” check box.

Tap ok.

Chapter 6 Customizing Your PA500

Resetting the Device
There are three kinds of reset that you can perform on your device when the device’s operating system
stops responding or the system becomes corrupted. Depending on the situation, a warm boot, clean
boot, or cold boot can be performed.

Warm Boot
You may have to perform a warm boot if the device freezes (i.e., device no longer responds to the
tapping on the screen).

To perform a warm boot:
A warm boot or soft reset allows your device to get a fresh start, similar to rebooting a computer. This
will restart your device and adjust memory allocation. All records and entries are retained after a warm
boot. Unsaved data in open programs may in some cases be lost.
1.
2.

Remove the stylus from its holder.
Lightly press the tip of the stylus to the Reset button located on the rear of the device.

Clean Boot
A clean boot allows your device will do a registry cleanup and reset all the system to the factory default.

To perform a clean boot:
1.
2.

Hold down the right and left scanner trigger buttons.
While holding down the scanner trigger buttons, gently press the tip of the stylus to the reset
button located on the rear of the device.

Cold Boot
A cold boot will cut off power to your device. This will erase all records and entries, delete all programs
you have added, and restore the device default factory settings. Never perform a cold boot unless a
warm or clean boot does not correct your problem. When you perform your next ActiveSync operation,
you can restore any data that you previously synchronized to your computer or you can restore data
that you backed up to a storage card.

NOTE:

When you perform a cold boot, the date and time settings are not retained. Formats,
preferences, and other settings are restored to their default factory settings.

To perform a cold boot:
1.
2.

Hold down the power button.
While holding down the power button, gently press the tip of the stylus to the reset button
located on the rear of the device.

Viewing Flash ROM Files
Flash ROM (read-only memory) is a rewritable storage for programs and data files. The benefit of this
feature is that files and programs saved in Flash ROM are unaffected by the PA500 power status.
To access the Flash Memory files:

To
access
the>Flash
Memory files:
1. Click
My Device
Flash Storage
1.
2.

Connect the device to your computer. See page 22.
On your computer, click My Computer → Mobile Device → Flash Storage.

To transfer the files to the device's flash memory:

1. Connect the device to your computer by ActiveSync.

To transfer files to Device’s Flash Memory:

2. On your computer's Activesync, click Mobile Device > Flash Storage.

Connect the device to your computer. See page 22.

3. Select
theyour
file that
you wantclick
to transfer.
2. On
computer,
My Computer → Mobile Device → Flash Storage.

Select the file that you want to save.

4. Drag the file from your terminal's flash storage folder to your computer's folder or drag the file from your
4. Click
Fileto→
To and
select
Flash
Storage.
computer's
folder
theSave
terminal's
flash
storage
folder.

Adding Programs to Your Device
Programs bundled with your device at the factory are stored in Flash ROM. You cannot remove these
programs, and you’ll never accidentally lose Flash ROM contents. Software programs and data files
added to your PA500 after factory installation can be stored in RAM (random access memory).

To add programs using ActiveSync:
Before installing a program on your device, you must first install the appropriate software to your device
on your computer.
1.

Determine your device and processor type so that you know which version of the software to
install.
a. Tap Start → Settings.
b. On the System tab, tap About.
c. On the Version tab, make a note of the processor information.

Download the program to your computer (or insert the CD or disk that contains the program into
your computer).
You may see a single *.xip, *.exe or *.zip file, a Setup.exe file, or several versions of files for
different device types and processors. Be sure to select the program designed for Pocket PC
and your device’s processor type.

NOTE:
3.

Read any installation instructions. Read Me files or documentation that come with the
program. Many programs provide special installation instructions.

Connect your device to your computer.

Chapter 6 Customizing Your PA500
4.

Double-click the *.exe file.
– If the file is an installer, the installation wizard will begin. Follow the directions on the screen.
Once the software has been installed on your computer, the installer will automatically transfer the software to your device.
– If the file is not an installer, you will see an error message stating the program is valid but is
designed for a different type of computer. You will need to move this file to your device. If you
cannot find any installation instructions for the program in the Read Me file or documentation,
use ActiveSync Explore button to copy the program file to the Program Files folder on your
device. For more information on copying files using ActiveSync, see page 24.

Once installation is complete, tap Start → Programs, then the program icon to launch it.
If you are installing a *.cab file on your device, open ActiveSync on your desktop, then click the
Explore button. The application will install on your device.

To add a program from the Internet:
1.
2.

Determine your device and processor type so that you know which version of the software to
install. Refer to previous section for instructions.
Download the program to your device straight from the Internet using Internet Explorer Mobile.

NOTE:
3.
4.

Read any installation instructions. Read Me files or documentation that come with the
program. Many programs provide special installation instructions.

Tap the file, such as *.xip or *.exe file. The installation wizard will begin.
Follow the onscreen instructions.

Adding a Program to the Start Menu
You can choose what program icons should appear on the menu based on which ones you use most
often.

To add a program to the Start menu program using Settings:
1.
2.

Tap Start → Settings.
On the Personal tab, tap Menus.

Select the check box for the programs you wish to add.
If you do not see the program you want, you can either use File Explorer on your device to
move the program to the Start Menu folder, or use ActiveSync on your computer to create a
shortcut to the program and place the shortcut in the Start Menu folder.
Tap ok.

To add a program to the Start menu program using File Explorer on your device:

1.
2.

Tap Start → Programs → File Explorer.
Tap the My Device icon (tap the folder list, labeled My Documents by default, and then My
Device to see a list of all folders on your device).

Open the path: Windows | Start | Programs.

Chapter 6 Customizing Your PA500
4.

Tap and hold the program you want to add to the menu, then tap Cut on the pop-up menu.

5.
6.

Open the path: Windows | Start Menu.
Tap and hold a blank area of the screen, then tap Paste on the pop-up menu.

A Confirm File Move dialog box appears, tap Yes.

The program will now appear on the Start menu.

To add a Start menu program using ActiveSync on your computer:
1.
2.
3.
4.

In the ActiveSync on your computer, click Explore to explore your device’s files and locate the
program.
Right-click the program, and then click Create Shortcut.
Open the path: Mobile Devices | Windows | Start Menu.
Move the shortcut to the Start Menu folder. The shortcut now appears on the Start menu.
For more information on using ActiveSync, see ActiveSync Help on your computer.

Removing Programs
You can only remove programs that you have installed. Programs that come with your device cannot be
removed.

To remove a program using Settings:
1.
2.
3.
4.

Tap Start → Settings.
On the System tab, tap Remove Programs.
Tap the program you wish to remove.
Tap Remove.

To remove a program using File Explorer on your device:
If the program does not appear in the list of installed programs, use File Explorer on your device to
locate the program:
1.
2.
3.
4.

Tap Start → Programs → File Explorer.
Tap the My Device icon (tap the folder list, labeled My Documents by default, and then My
Device to see a list of all folders on your device).
Open the path: Windows | Start | Programs.
Tap and hold the program you want to remove, then tap Delete on the pop-up menu.

Appendix A
System Specifications
Processing/Memory

Input/Output

CPU

Intel PXA270 processor with speed of up to 520 MHz

Memory

• SDRAM: 64 MB
• Flash ROM: 64 MB Built-in (Flash Memory
Manager included)

Input Devices

•
•
•
•
•
•

Touch screen
Stylus
Control buttons
Full alphanumeric software keyboard
Mag stripe reader
Barcode scanner

Control and Quick
launch hot keys

•
•
•
•
•
•
•

Navigation key
Software keyboard button
Email button
Today button
Calendar button
Tasks button
Notes button

Audio

• Built-in speaker
• 3.5 mm stereo earphone jack
• Microphone

Display

• 3.5" QVGA LCD touch-sensitive screen and
Electroluminescent backlight
• 320 x 240 resolution

LED Indicator

Dual colors (green/red) for barcode read indication

Scan Engine

• Light Source: Visible Laser Diode (VLD) 650 nm
• Min. print contrast: 25% absolute dark/light
reflectance at 650 nm
• Power Consumption: 65 mA typical@5 V

Connectivity

• USB port
• SDIO/MMC slot

Wireless connectivity

• Bluetooth
Version: 1.1 and 1.2 with class 2 specification
Peak output power: 2 ±2 dBm
Frequency band: 2400-2483.5 MHz
Operating channels: 79 Channels
Modulation Type: GFSK

Input/Output

Wireless connectivity

• WLAN (802.11b)
802.11b low power (3.96 mW deep sleep mode)
Peak output power: 18 ±2 dBm
Frequency band: 2400-2483.5 MHz
Operating channels: 11 Channels
Modulation Type:
CCK (1Mbps)
DBPSK (2Mbps)
DQPSK (5.5/11Mbps)
• WLAN (802.11g)
802.11g low power (3.96 mW deep sleep mode)
Peak output power: 15 ±2 dBm
Frequency band: 2400-2483.5 MHz
Operating channels: 11 Channels
Modulation Type: OFDM (6~54Mbps)
• Serial infrared port

Power

Main battery

Standard battery: 3.7 V, 2200 mAh

Battery life

4 hours

Battery charge

• 3.5 hours with external AC adapter
• 3.5 hours with docking station

Backup battery

One hour data retaining time when main battery is
removed

Power management

• Provide all voltage outputs required in this device
• Retain memory content more than 72 hours after
automatic low battery shutdown
• Provide 4 hours operating time with a standard
battery. The activities in operating period are:
a. Scan one barcode.
b. Send this barcode data to the host via wireless
LAN.
c. Repeat items 1 and 2 every 5 seconds.
• Provide 3-level battery status to show main
battery capacity
• Provide 3-level battery status to show back-up
battery capacity
• 3.5 hours charging time
• 16 hours backup battery charging time

Appendix A System Specifications
Barcode/Symbology

Barcode Scanner

Symbol SE950

Symbology

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Bookland EAN
Codabar
Code 11
Code 128
Code 32 (Pharmacy Code)
Code 39
Code 93
Delta Code
EAN 128
EAN 13
EAN 8
Interleaved 2 of 5
Label Code IV & V
MSI/Plessy
Standard 2 of 5/Toshiba (China Postal Code)
group
Telpen
UPC A
UPC E
UPC/EAN group

OS and Software
Programming Tools

Microsoft Windows Mobile 5.0

Language Support

•
•
•
•

Mechanical and
Environmental

Dimensions

Length: 126 mm
Width: 76 mm
Depth: 23 mm

Weight

220 g

Temperature

Operating: 0° to 50°C
Non-operating: -20° to 60°C

Humidity

Operating/Non-operating: 5% to 95% RH

Vibration

Operating/Non-operating: 2g, 10 - 500 Hz

Shock

Operating: 10 g
Non-operating: 15 g

Drop

120 cm, without major damage

International English
Japanese
Simplified Chinese
Traditional Chinese

Technische Daten des Systems
CPU/Speicher

Eingang/Ausgang

CPU

Intel PXA270-Prozessor mit Frequenzen bis zu 520
MHz

Speicher

• SDRAM: 64 MB
• Flash ROM: 64 MB integriert (inklusive FlashSpeicher-Manager)

Eingangsgerate

•
•
•
•
•
•

Touchscreen
Stift
Kontrolltasten
Vollalphanumerische Software-Tastatur
Magnetstreifenleser
Barcode-Scanner

Kontroll- und
Schnellstart-Hotkeys

•
•
•
•
•
•
•

Navigationstaste
Tasks-Taste
Software keyboard-Taste
Today-Taste
E-Mail-Taste
Calendar-Taste
Notes-Taste

Audio

• Eingebauter Lautsprecher
• Mikrofon
• 3,5 mm Stereo-Ohrhorerbuchse

Display

• Beruhrungsempfindlicher 3,5-Zoll-QVGA-LCDBildschirm und elektroluminiszierende
Beleuchtung
• 320 x 240 Auflosung

LED-Anzeige

Zwei Farben (grun/rot) fur Barcode-Leseanzeige

Scanmaschine

• Lichtquelle: Sichtbare Laser-Diode (VLD) 650 nm
• Min. Druckkontrast: 25% absolute Dunkelheit/
Lichtreflektion bei 650 nm
• Leistungsaufnahme: 65 mA typisch@5 V

Anschlussfahigkeit

• SB-Anschluss
• SDIO/MMC-Steckplatz

Drahtlosanschluss

• Bluetooth
Version: 1.1 und 1.2 mit Spezifikation Klasse 2
Ausgangsleistung (Spitze): -1 ±2 dBm
Frequenzband: 2400-2483,5 MHz
Betriebskanale: 79 Kanale
Modulationstyp: GFSK

Appendix A System Specifications
Eingang/Ausgang

Drahtlosanschluss

• WLAN (802.11b)
802.11b niedrige Leistung (3,96 mW
Tiefschlafmodus)
Ausgangsleistung (Spitze): 18 ±2 dBm
Frequenzband: 2400-2483,5 MHz
Betriebskanale: 11 Kanale
Modulationstyp:
CCK (1Mbps)
DBPSK (2Mbps)
DQPSK (5.5/11Mbps)
• WLAN (802.11g)
802.11g niedrige Leistung (3,96 mW
Tiefschlafmodus)
Ausgangsleistung (Spitze): 15 ±2 dBm
Frequenzband: 2400-2483,5 MHz
Betriebskanale: 11 Kanale
Modulationstyp: OFDM (6~54 Mbit/s)
• Serieller Infrarotanschluss

Strom

Hauptakku

Standardakku: 3.7 V, 2200 mAh

Akkunutzungszeit

4 Stunden

Akkuladung

• 3,5 Stunden mit externem Netzteil
• 3,5 Stunden mit Dockingstation

Backup-Akku

Daten werden bei Entfernung des Hauptakkus eine
Stunde lang beibehalten

Energieverwaltung

• Gibt alle Spannungen aus, die in diesem
Terminal benotigt werden
• Bewahrt den Speicherinhalt fur mindestens 72
Stunden nach automatischem Ausschalten
wegen schwachem Akku
• 4 Stunden Betriebszeit mit einem Standardakku.
Die Aktivitaten in der Betriebszeit sind:
a. Einen Barcode scannnen.
b. Diese Barcode-Daten uber drahtloses LAN an
den Host senden.
c. Punkte 1 und 2 alle 5 Sekunden wiederholen.
• Zeigt die Kapazitat des Hauptakkus anhand
eines 3-Stufen-Akkustatus
• Zeigt die Kapazitat des Backup-Akkus anhand
eines 3-Stufen-Akkustatus
• 3,5 Stunden Ladezeit
• 16 Stunden Ladezeit fur Backup-Akku

Barcode/
Symbologie

Barcode- Scanner

Symbol SE950

Symbologie

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Bookland EAN
Codabar
Code 11
Code 128
Code 32 (Pharmazie-Code)
Code 39
Code 93
Delta Code
EAN 128
EAN 13
EAN 8
Interleaved 2 von 5
Label Code IV & V
MSI/Plessy
Standard 2 von 5/ Toshiba-Gruppe (ChinaPostcode)
Telpen
UPC A
UPC E
UPC/EAN-Gruppe

Betriebssystem und
SoftwareProgrammierwerkze
uge

Betriebssystem

Microsoft Windows Mobile 5.0

Unterstutzte
Sprachen

•
•
•
•

Mechanik und
Umgebung

Abmessungen

Lange: 126 mm
Breite: 76 mm
Tiefe: 23 mm

Gewicht

220 g

Temperatur

Eingeschaltet: 0° to 50°C
Ausgeschaltet: -20° to 60°C

Luftfeuchte

Ein-/Ausgeschaltet: 5% to 95% RH

Erschutterung

Ein-/Ausgeschaltet: 2g, 10 - 500 Hz

Stoß

Eingeschaltet: 10 g
Ausgeschaltet: 15 g

Fall

120 cm, ohne wesentliche Beschadigungen

Englisch (international)
Japanisch
Vereinfachtes Chinesisch
Traditionelles Chinesisch

Appendix A System Specifications

Especificaciones del sistema
CPU/memoria

Entrada/salida

CPU

Procesador Intel PXA270 con velocidad hasta
520 MHz

Memoria

• SDRAM: 64 MB
• Flash ROM: 64 MB integrado (Administrador
de memoria flash incluido)

Dispositivos de entrada

•
•
•
•
•
•

Pantalla sensible al toque
Stylus
Botones de control
Teclado software alfanumerico completo
Lector de cinta mag
Escaner de codigos de barras

Teclas especiales de
control y de lanzamiento
rapido

•
•
•
•
•
•
•

Tecla de navegacion
Boton de Tasks
Boton de teclado software
Bouton Today
Boton de Email
Boton de Calendar
Boton de Notes

Sonido

• Bocina integrada
• Conector de audifono estereo de 3.5 mm
• Microfono

Pantalla

• 3.5" QVGA LCD touch-sensitive screen and
Electro luminescent backlight
• Resolucion 320 x 240

Indicador LED

Dos colores (verde/rojo) para indicar la lectura de
codigos de barras

Maquina escaner

• Fuente de luz: diodo laser visible (VLD) 650
nm
• Contraste de impresion min.: 25% oscuro
absoluto/reflejo claro a 650 nm
• Consumo de energia: 65 mA typical@5 V

Conectividad

• Puerto USB
• Ranura SDIO/MMC

Conectividad
inalambrica

• Bluetooth
Version: 1.1 y 1.2 con especificacion clase 2
Maxima produccion de corriente: 2 ±2 dBm
Banda de frecuencia: 2400-2483.5 MHz
Canales operativos: 79 canales
Tipo de modulacion: GFSK

Entrada/salida

Conectividad
inalambrica

• WLAN (802.11b)
802.11b de baja corriente (3.96 mW en modo
dormir profundo)
Maxima produccion de corriente: 18 ±2 dBm
Banda de frecuencia: 2400-2483.5 MHz
Canales operativos: 11 Channels
Tipo de modulacion:
CCK (1Mbps)
DBPSK (2Mbps)
DQPSK (5.5/11Mbps)
• WLAN (802.11g)
802.11g de baja corriente (3.96 mW en modo
dormir profundo)
Maxima produccion de corriente: 15 ±2 dBm
Banda de frecuencia: 2400-2483.5 MHz
Canales operativos: 11 canales
Tipo de modulacion: OFDM (6~54Mbps)
• Puerto serial infrarrojo

Energia

Bateria principal

Bateria estandar: 3.7 V, 2200 mAh

Duracion de carga de la
bateria

4 horas

Carga de bateria

• 3.5 horas con adaptador de corriente AC
externo
• 3.5 horas con estacion de acoplamiento

Bateria de respaldo

Una hora de uso despues de retirar la bateria
principal

Administracion de
energia

• Proporciona todas las salidas de voltaje
requeridas en esta terminal
• Retiene el contenido de memoria por mas de
72 horas luego del apagado automatico por
bajo nivel de bateria
• Proporciona 4 horas de operacion usando un
paquete de bateria estandar. Las actividades
en el periodo de operacion son:
a. Escanea un codigo de barras.
b. Envia el dato del codigo de barras al
anfitrion atraves del LAN inalambrico.
c. Repite articulos 1 y 2 cada 5 segundos.
• Proporciona 3 niveles de estado de bateria
para mostrar la capacidad de la bateria
principal
• Proporciona 3 niveles de estado de bateria
para mostrar la capacidad de la bateria de
respaldo
• 3.5 horas para recargar la bateria
• 16 horas para recargar la bateria de respaldo

Appendix A System Specifications
Codigo de barras/
simbologia

Escaner de codigos de
barras

Simbolo SE950

Simbologia

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Bookland EAN
Codabar
Codigo 11
Codigo 128
Codigo 32 (Codigo de farmacia)
Codigo 39
Codigo 93
Codigo Delta
EAN 128
EAN 13
EAN 8
Entrelazado 2 de 5
Codigo de etiqueta IV & V
MSI/Plessy
Grupo estandar 2 de 5/ Toshiba (codigo postal
chino)
Telpen
UPC A
UPC E
GroupeUPC/EAN

Sistema operativo y
herramientas de
programacion
software

Sistema operativo

Microsoft Windows Mobile 5.0

Idioma soportado

•
•
•
•

Mecanicas y del
ambiente

Dimensiones

Largo: 126 mm
Ancho: 76 mm
Grosor: 23 mm

Peso

220 g

Temperatura

Operativa: 0° to 50°C
No operativa: -20° to 60°C

Humedad

Operativa/no operativa: 5% to 95% RH

Vibracion

Operativa/no operativa: 2g, 10 - 500 Hz

Choque

Operativa: 10 g
No operativa: 15 g

Caida

120 cm, sin mayor dano

Ingles internacional
Japones
Chino simplificado
Chino tradicional

Specifications du systeme
Processeur/
Memoire

Entree/Sortie

Processeur

Processeur Intel PXA270 avec frequence jusqu'a
520 MHz

Memoire

• SDRAM: 64 MB
• ROM Flash: 64 Mo integre (gestionnaire de
memoire Flash inclus)

Peripheriques d'entree

•
•
•
•
•
•

Ecran tactile
Stylet
Boutons de controle
Clavier logiciel alphanumerique complet
Lecteur de carte magnetique
Scanner de code barres

Touches speciales de
lancement rapide et de
controle

•
•
•
•
•
•
•

Touche de Navigation
Bouton Tasks
Bouton Software keyboard
Bouton Today
Bouton Email
Bouton Calendar
Bouton Notes

Audio

• Haut-parleur integre
• Prise ecouteur stereo 3,5 mm
• Microphone

Affichage

• Ecran tactile LCD QVGA de 3,5 pouces et
retroeclairage electroluminescent
• Resolution de 320 x 240

Voyant diode

Bicolore (vert/rouge) pour l'indication de lecture
de code barres

Moteur de numerisation

• Source lumineuse : Diode a laser visible (VLD)
650 nm
• Contraste d'impression mini : Reflectivite
sombre/claire absolue 25% a 650 nm
• Consommation : 65 mA typique a 5 V

Connectivite

• Port USB
• Emplacement SDIO/MMC

Connectivite sans fil

• Bluetooth
Version : 1.1 et 1.2 avec specification
classe 2
Sortie d'alimentation de pointe : 2 ±2 dBm
Bande de frequence : 2400-2483.5 MHz
Canaux de fonctionnement : 79 Channels
Type de modulation : GFSK

Appendix A System Specifications
Entree/Sortie

Connectivite sans fil

• Reseau sans fil (802.11b)
802.11b basse puissance (3,96 mW mode de
sommeil profond)
Sortie d'alimentation de pointe : 18 ±2 dBm
Bande de frequence : 2400-2483.5 MHz
Canaux de fonctionnement : 11 canaux
Type de modulation :
CCK (1Mbps)
DBPSK (2Mbps)
DQPSK (5.5/11Mbps)
• Reseau sans fil (802.11g)
802.11g basse puissance (3,96 mW mode de
sommeil profond)
Sortie d'alimentation de pointe : 15 ±2 dBm
Bande de frequence : 2400-2483.5 MHz
Canaux de fonctionnement : 11 canaux
Type de modulation : OFDM (6~54Mbps)
• Port infrarouge serie

Alimentation

Batterie principale

Batterie standard : 3,7 V, 2200 mAh

Autonomie de la batterie

4 heures

Charge de la batterie

• 3,5 heures avec adaptateur secteur externe
• 3,5 heures avec station d'accueil

Batterie de secours

Temps de retention des donnees d'une heure lors
du retrait de la batterie principale

Gestion de l'alimentation

• Fournir toutes les tensions necessaires dans
cet appareil
• Retenir le contenu de la memoire plus de 72
heures apres l'arret automatique pour batterie
basse
• Fournir 4 heures de temps de fonctionnement
avec une batterie standard. Les activites en
periode de fonctionnement sont :
a. Numeriser un code barres.
b. Envoyer ces donnees de code barres au
hote via le reseau sans fil.
c. Repeter les etapes 1 et 2 toutes les 5 secondes.
• Fournir l'etat a 3 niveaux de la batterie pour
afficher la capacite de la batterie principale
• Fournir l'etat a 3 niveaux de la batterie pour
afficher la capacite de la batterie de secours
• Temps de charge de 3,5 heures
• Temps de charge de 16 heures de la batterie
de secourse

Code barres/
Symboles

Scanner de code barres

Symbol SE950

Symboles

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Bookland EAN
Codabar
Code 11
Code 128
Code 32 (Code Pharmacie)
Code 39
Code 93
Delta Code
EAN 128
EAN 13
EAN 8
2 parmi 5 entrelaces
Code etiquette IV & V
MSI/Plessy
2 parmi 5 standard/ groupe Toshiba (Code
postal chinois)
Telpen
UPC A
UPC E
GroupeUPC/EAN

Systeme
d'exploitation et
outils de
programmation
logicielle

Systeme d'exploitation

Microsoft Windows Mobile 5.0

Prise en charge
linguistique

•
•
•
•

Mecanique et
environnement

Dimensions

Longueur : 126 mm
Largeur : 76 mm
Profondeur : 23 mm

Poids

220 g

Temperature

En marche : 0° to 50°C
A l'arret : -20° to 60°C

Humidite

En marche/A l'arret : 5% to 95% RH

Vibration

En marche/A l'arret : 2g, 10 - 500 Hz

Choc

En marche : 10 g
A l'arret : 15 g

Chute

120 cm, sans degat majeur

Anglais international
Japonais
Chinois simplifie
Chinois traditionnel

Appendix A System Specifications

系统规格
CPU/ 内存

输入 / 输出

CPU

520MHz Intel.PXA270 处理器

内存

•

输入设备

控制键与快捷键

音频

显示屏

•

SDRAM: 64 MB
Flash ROM: 6 闪存 ROM 64MB 内置闪存 （含闪存管理器）

•

触屏

•

记录笔

•

控制按钮

•

全字母数字软件键盘

•

磁条阅读器

•

条码扫描器

•

导航键

•

任务键

•

软件键盘键

•

日志键

•

Email 键

•

日历键

•

记录键

•

内置扬声器

•

3.5mm 立体声耳机插孔

•

麦克风

•

3.5” QVGA LCD 触摸屏及背光灯

•

分辨率：320 × 240

LED 指示

双色 （绿 / 红）条码阅读指示

Scan Engine

•

扫描引擎光源：650nm 可视激光二极管 （VLD）

•

最低印刷反差：650mm 时， 25% 绝对暗 / 光折射

•

功耗：5V 时标准量为 65mA

•

USB 端口

•

SDIO/MMC 插槽

•

蓝牙

连接性
无线连接性

型号：1.1 和 1.2，符合 2 级规范
峰值输出功率：2 ±2 dBm
频带：2400-2483.5 MHz
工作频道：79 个频道
调制类型：GFSK

输入 / 输出

无线连接性

•

无线局域网 WLAN (802.11b)
802.11b 低功率 (3.96 mW 深度睡眠模式 )
峰值输出功率：18 ± 2 dBm
频带：2400-2483.5 MHz
工作频道：11 个频道
调制类型：
CCK (1Mbps)
DBPSK (2Mbps)
DQPSK (5.5/11Mbps)

•

无线局域网 WLAN (802.11g)
802.11g 低功率 (3.96 mW 深度睡眠模式 )
峰值输出功率：15 ± 2 dBm
频带：2400-2483.5 MHz
工作频道：11 个频道
调制类型：OFDM (6~54Mbps)

•

电源

串行红外端口

主电池

标准电池：3.7 V, 2200 mAh

电池寿命

4 小时

电池充电

•

用外接 AC 适配器， 3.5 小时

•

使用座充时， 3.5 小时

后备电池

当电池被取出时，资料可保留一个小时

电源管理

•

提供该终端所需的所有电压输出

在电池无电而自动关闭之后，储存器的内容可保留 72 小
时以上。
• 采用标准电池，可提供 4 小时操作时间。操作期间的活动
包括以下各项：
a. 扫描一个条码。
b. 通过无线 LAN 将该条码资料传送到主机。
•

c. 每 5 秒重复步骤 1 和步骤 2。

•

提供 3 级电池状态，以显示主电池电量。

•

提供 3 级电池状态，以显示后备电池电量。

•

3.5 小时充电时间。

•

16 小时后备电池充电时间。

Appendix A System Specifications
条码 / 符号

操作系统与软件编
程工具

机械与环境条件

条码扫描器

Symbol SE950

符号

•

Bookland EAN 码

•

Codabar 码

•

11 码

•

128 码

•

32 码 (Pharmacy 码 )

•

39 码

•

93 码

•

Delta 码

•

EAN 128 码

•

EAN 13 码

•

EAN 8 码

•

隔行扫描 2/5

•

IV & V 标号码

•

MSI/Plessy 码

•

标准 2/5/ 东芝 ( 中国邮政区号 ) 组码

•

Telpen 码

•

UPC A 码

•

UPC E 码

•

UPC/EAN 组码

操作系统

Microsoft Windows Mobile 5.0

语言支持

•

全球通用英文

•

日文

•

简体中文

•

繁体中文

尺寸

长：126 mm
宽： 76 mm
高： 23 mm

重量

220 g

温度

工作： 0° to 50°C
非工作： -20° to 60°C

湿度

工作 / 非工作： 5% to 95% RH

振动

工作 / 非工作：2g, 10 - 500 Hz

冲击

工作： 10 g
非工作： 15 g

跌落

120 cm，无严重损坏

系統規格
CPU/ 記憶體

輸入 / 輸出

CPU

Intel PXA270 處理器，處理速度 520 MHz

記憶體

•

SDRAM: 64 MB

•

快閃記憶體 ROM: 64 MB，內建式 （含快閃記憶
體管理程式）

•

觸控螢幕

•

手寫筆

•

控制鍵

•

文字軟體鍵盤

•

磁條閱讀器

•

條碼掃描器

•

導航按鍵

•

工作按鍵

•

軟體鍵盤按鍵

•

日誌按鍵

•

Email 按鍵

•

日曆按鍵

•

筆記按鍵

•

內建式喇叭

•

3.5 mm 立體聲耳機插孔

•

麥克風

•

3.5” QVGA LCD 觸控螢幕及電致發光背光燈

•

320 x 240 解析度

輸入裝置

控制鍵與快捷鍵

音頻

顯示幕
LED 指示器

雙色 （綠 / 紅）條碼閱讀指示

掃描引擎

•

光源：可視鐳射二極體 （VLD） 650nm

•

最低印刷反差：650 nm 時，25% 絕對暗 / 光折射

•

功耗： 5V 時標準量為 65 mA

•

USB 埠

•

SDIO/MMC 插槽

•

藍芽

連接裝置
無線連接裝置

版本：等級 2 規規 1.1 及 1.2
峰值輸出電源： 2 ± 2 dBm
頻寬： 2400-2483.5 MHz
作業頻道： 79 頻道
調變型態： GFSK

Appendix A System Specifications
輸入 / 輸出

無線連接裝置

•

WLAN (802.11b)
802.11b 低電源 (3.96 mW 深度睡眠模式 )
峰值輸出電源： 18 ± 2 dBm
頻寬： 2400-2483.5 MHz
作業頻道： 11 頻道

調變型態：
CCK (1Mbps)
DBPSK (2Mbps)
DQPSK (5.5/11Mbps)
• WLAN (802.11g)
802.11g 低電源 (3.96 mW 深度睡眠模式 )
峰值輸出電源： 15 ± 2 dBm
頻寬： 2400-2483.5 MHz
作業頻道： 11 頻道
調變型態： OFDM (6~54Mbps)
•

電源

串列紅外線埠

主電池

標準電池： 3.7 V， 2200 mAh

電池使用時間

4 小時

電池充電

•

用外接 AC 配接器時，3.5 小時

•

使用座充時，3.5 小時

後備電池

當主電池被取出時，資料可保留一個小時。

電源管理

•

提供該終端所需的所有電壓輸出。

•

在電池無電而自動關機之後，可將記憶內容保留
72 小時。

•

採用標準電池，可提供 4 小時操作時間。操作期
間的活動包括以下各項：
a. 掃描一個條碼。
b. 通過無線 LAN 將該條碼資料傳送到主機。
c. 每 5 秒重複步驟 1 和步驟 2。

•

提供 3 級電池狀態，以顯示主電池容量。

•

提供 3 級電池狀態，以顯示後備電池容量。

•

3.5 小時充電時間。

•

16 小時後備電池充電時間。

條碼 / 符號體系

作業系統與軟體編程
工具

機械條件與環境條件

條碼掃描器

Symbol SE950

符號體系

•

Bookland EAN 碼

•

Codabar 碼

•

11 碼

•

128 碼

•

32 碼 （藥局碼 )

•

39 碼

•

93 碼

•

Delta 碼

•

EAN 128 碼

•

EAN 13 碼

•

EAN 8 碼

•

交叉 2 5 碼

•

IV & V 標號碼

•

MSI/Plessy 碼

•

交叉 2 5 碼 / 東芝 （中國郵遞區號）組碼

•

Telpen 碼

•

UPC A 碼

•

UPC E 碼

•

UPC/EAN 組碼

作業系統

Microsoft Windows Mobile 5.0

語言支援

•

全球通用英文

•

日文

•

簡體中文

•

繁體中文

尺寸

長： 126 mm
寬： 76 mm
高： 23 mm

重量

220 g

溫度

工作： 0° to 50°C
非工作：-20° to 60°C

濕度

工作 / 非工作： 5% to 95% RH

振動

工作 / 非工作： 2g, 10 - 500 Hz

衝擊

工作： 10 g
非工作：15 g

跌落

120 cm 無嚴重損壞

Appendix A System Specifications

システム・スペック
CPU/ メモリー

インプット / アウト
プット

CPU

Intel PXA270 プロセッサー（520MHz）

メモリー

•

SDRAM： 64 MB

•

フラッシュ ROM： 64MB 内蔵（フラッシュメモリー
マネージャー）

•

ッチスクリーン

•

スタイラス

•

コントロールボタン

•

英数字ソ ' トキーボード

•
•

マグストライプリーダー
バーコードスキャナー

•

ナビゲーションキ ー

•

ソ ' トウェア・キーボードボタン

•

メールボタン

•

ノートボタン

•

タスクボタン

•

Today ボタン

•

カレンダーボタン

•

ビルトインスピーカ ー

•

3.5mm ステレオヘッドホンジャック

•

マイク

インプットデバ
イス

コントロール・
クイックキー

オーディオ

3.5”QVGA LCD タッチスクリーン、エレクトロルミ
ネセントバックライト
• 解像度 320*240

ディスプレイ

•

LED インジケー
ター

バーコード読取デュアル表 '（緑・赤）

スキャンエンジ
ン

•

光源：可視レーザーダイオード（VLD）650 nm

•

最小プリントコントラスト：25％アブソ 'ートダーク
/ ライト（650 nm 時）

•

消費電力：65 mA typical@5 V

•

USB ポート

•

SDIO/MMC スロット

•

ブルートゥース

接続
ワイヤレス接続

バージョン：1.1 および 1.2、クラス 2 仕様
ピーク出力： 2 ±2 dBm
周波数帯：2400-2483.5 MHz
作動チャンネル：79 チャンネル
変調タイプ：GFSK

インプット / アウト
プット

ワイヤレス接続

•

WLAN (802.11b)
802.11b 低電力 (3.96 mW ディープスリープモード )
ピーク出力：18 ± 2 dBm
周波数帯：2400-2483.5 MHz
作動チャンネル：11 チャンネル

変調タイプ：
CCK (1Mbps)
DBPSK (2Mbps)
DQPSK (5.5/11Mbps)
• WLAN (802.11g)
802.11g 低電力 (3.96 mW ディープスリープモード )
ピーク出力：15 ± 2 dBm
周波数帯：2400-2483.5 MHz
作動チャンネル：11 チャンネル
変調タイプ：OFDM (6~54Mbps)
•

電源

連続赤外線ポート

メインバッテ
リー

標準バッテリー 3.7 V, 2200 mAh

バッテリー持続
時間

4 時間

バッテリー充電

•

外部 ＡＣ アダプター（3.5 時間）

•

ドッキングステーション（3.5 時間）

バックアップ
バッテリー

メインバッテリー取外しの場合、1 時間以内のデータ
を保持

パワーマネジメ
ント

•

この端末で必要なすべての電圧出力を供給

•

メモリー内容を、自動シャットダウン後 72 時間保存

•

標準バッテリーで 4 時間作動
操作時の動作：
a. バーコードスキャン
b. バーコードデータをワイヤレス ＬＡＮ でホスト
機に送信
c. 5 秒ごとに 1 と 2 を繰返し

•

メインバッテリー残量を 3 段階で表

•

バックアップバッテリー残量を 3 段階で表

•

充電 3.5 時間

•

バックアップバッテリー充電 16 時間

Appendix A System Specifications
バーコード / コード

バーコード
スキャナー

Symbol SE950

コード

•

コーダバー

•

コード 11

•

コード 128

•

コード 32

• （薬学コード）
•

コード 39

•

コード 93

デルタコード
EAN 128
• EAN 13
• EAN 8
•
•

•

インターリーブ 2、5
Label Code IV & V
MSI/Plessy
Standard 2 of 5/ Toshiba (China Postal Code) group
Telpen
UPC A
UPC E

•

UPC/EAN グループ

•
•
•
•
•
•

OS、ソ ' トプログ
ラミングツール

機構 ' 使用環境

OS: Microsoft Windows Mobile 5.0

言語サポート

•

国際英語

•

日本語

•

簡体字中国 語

•

繁体字中国語

寸法

長さ：126ｍｍ
幅：76mm
高さ：23 ㎜

重量
温度

220 g
作動時：0 － 50 ℃
非作動時：-20 － 60 ℃

湿度

作動時 / 非作動時：相対湿度 5％－ 95％

振動

作動時 / 非作動時：2g, 10 － 500 Hz

衝撃

作動時：10g
非作動時：15g

落下

120cm 以下、大きなダメージ無き場合

Appendix B
Regulatory Compliance Statements
FCC Statement
This is a FCC Part 15 Class B product. In a domestic environment this product may cause radio
interference, in which case the user may be required to take adequate measures.

Canadian Compliance Statement
This Class B Digital apparatus meets all requirements of the Canadian Interferance-Causing
Equipment Regulations.
The device is certified to the requirements of RSS-139-1 for 2.4 GHz spread spectrum devices.

European Conformity Statement
Declaration of Conformity with Regard to the R&TTE 1999/5/EC and EMC89/336/ EEC directives.

Laser Information
The unitech PA500 series is certified in the U.S. to conform to the requirements of DHHS/CDRH 21CFR
Subchapter J and to the requirements of IEC 825-1. Class II and Class 2products are not considered to
be hazardous. The PA500 series contains internally a Visible Laser Diode (VLD) whose emissions do
not exceed the maximum limits as set forth in the above regulations. The scanner is designed so that
there is no human access to harmful laser light during normal operation, user maintenance or during
prescribed service operations.The laser safety warning label required by the DHHS/IEC for the PA500
series’s optional laser scanner module is located on the memory compartment cover, on the back of the
unit.
CAUTION! Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous laser light. Use of optical instruments with the scanner will increase eye
hazard. Optical instruments include binolulars, microscopes, and magnifying glasses. This does not
include eye glasses worn by the user.

Appendix B Regulatory Compliance Statements

Erklarung zur Ubereinstimmung mit
FCC-Erklärung
Die ist ein mit FCC, Teil 15, übereinstimmendes Produkt der Klasse B. In einer Wohnumgebung könnte
dieses Produkt den Funkverkehr stören, wobei der Benutzer dann entsprechende Gegenmaßnahmen
treffen muss.

Erklärung zur Übereinstimmung mit Vorschriften Kanadas
Dieses Digitalgerät der Klasse B entspricht sämtlichen Anforderungen der kanadischen Bestimmungen
für störfelder-erzeugende Geräte.
Das Gerät besitzt die Zertifizierung für RSS-139-1-Anforderungen für 2,4 GHz Spread-SpectrumGeräte.

Erklärung zur Übereinstimmung mit Vorschriften Europas
Erklärung zur Übereinstimmung mit den Richtlinien R&TTE 1999/5/EG und EMV 89/336/EWG.

Laser-Information
Die unitech PA500-Serie ist in den USA für Übereinstimmung mit den Anforderungen von DHHS/CDRH
21CFR, Unterkapitel J, und den Anforderungen von IEC 825-1 zertifiziert. Produkte der Klasse II und
Klasse 2 werden nicht als gefährlich angesehen. Die PA500-Serie besitzt intern eine sichtbare
Laserdiode (VLD), deren Strahlung nicht die maximalen Grenzwerte, die in den obigen Bestimmungen
festgelegt sind, überschreitet. Der Scanner ist so ausgelegt, dass bei normalem Betrieb, während
Wartungsarbeiten seitens des Benutzers oder bei festgesetzten Reparaturen kein menschlicher
Zugang zum gefährlichen Laserlicht erforderlich ist. Das von der DHHS/IEC für das optionale
Laserscannermodul der PA500-Serie geforderte Warnschild für Lasersicherheit befindet sich auf der
Abdeckung des Speicherfachs auf der Rückseite des Geräts.
ACHTUNG – Die Bedienung von Kontrolltasten oder Einstellungen oder Ausführung von Vorgängen,
die von den hier beschriebenen abweichen, können eine gefährliche Laserbestrahlung zur Folge
haben. Die Verwendung optischer Instrumente mit dem Scanner erhöht die Gefar für Ihr Augenlicht.
Optische Instrumente beziehen sich auf Ferngläser, Mikroskope und Lupen. Vom Benutzer getragene
Brillen sind hiervon nicht betroffen.

Declaracion regulatoria
Declaracion de la FCC
Este es un producto de la clase B de la parte 15 de la Comision Federal de Comunicaciones (FCC).
Este producto puede causar interferencias radiales en un entorno domestico. En tal caso el usuario
debera tomar medidas correctivas adecuadas.

Declaracion de conformidad con regulaciones canadienses
Este aparato digital de la clase B satisface todos los requisitos de las regulaciones canadienses acerca
de las interferencias causadas por equipos.
Este dispositivo esta certificado de acuerdo a los requisitos RSS-139-1 para dispositivos con un rango
espectral de 2.4 GHz.

Declaracion de conformidad con regulaciones europeas
Declaracion de conformidad con respecto a las directivas R&TTE 1999/5/EC y EMC 89/336/ EEC.

Informacion laser
La computadora unitech de la serie PA500 esta certificada en los Estados Unidos por los requisitos del
subcapitulo J de DHHS/CDRH 21CFR y IEC 825-1. Los productos de la Clase II y Clase 2 no son
considerados peligrosos. La serie PA500 contiene un diodo laser visible (VLD) con emisiones que no
exceden los limites establecidos por las regulaciones citadas. El escaner esta disenado para impedir el
acceso humano a la luz laser danina durante su operacion normal, mantenimiento o reparacion. La
etiqueta de advertencia de seguridad laser DHHS/IEC para el modulo escaner laser opcional de la
serie PA500 se encuentra en el compartimiento de memoria del panel trasero de la computadora.
ADVERTENCIA: El uso de controles, ajustes o procedimientos de rendimiento que no hayan sido
especificados en este documento pueden resultar en una luz laser danina. El uso de instrumentos
opticos con el escaner incrementaran el riesgo de posibles danos oculares. Tales instrumentos opticos
pueden ser binoculares, microscopios, y lupas. No se incluyen las gafas portadas por los usuarios.

Appendix B Regulatory Compliance Statements

Déclaration de conformité réglementaire
Déclaration FCC
Ceci est un produit FCC article 15 classe B Dans un environnement domestique ce produit peut être à
l’origine d’interférence radio, auquel cas l’utilisateur peut avoir l’obligation de prendre des mesures
adéquates.

Déclaration de conformité du Canada
Cet appareil numerique de la classe B respecte les exigences du Reglement sur le material broilleur du
Canada.
L’appareil est certifié aux exigences de RSS-139-1 pour les appareils de l’étalement de spectre 2,4
GHz.

Déclaration de conformité pour l’Europe
Déclaration de conformité en ce qui concerne les directives R&TTE 1999/5/EC et EMC 89/336/ EEC.

Informations sur le laser
La gamme unitech PA500 est certifiée aux États-unis comme étant conforme aux exigences de DHHS/
CDRH 21CFR sous-chapitre J et aux exigences de IEC 825-1. Les produits de classe II et de classe 2
ne sont pas considéré comme dangereux. La gamme PA500 contient en interne une diode à laser
visible (VLD) dont les émissions n’excèdent pas les limites maximales définies dans les
réglementations ci-dessous. Le scanner est conçu pour qu’il n’y ait pas d’accès humain à une lumière
laser nuisible pendant l’utilisation normale, l’entretien par l’utilisateur ou les opérations de service
prescrites. L’étiquette d’avertissement de sécurité du laser exigée par DHHS/IEC pour le module
scanner laser en option de la gamme PA500 est située sur le couvercle du compartiment de la
mémoire, sur l’arrière de l’unité.
ATTENTION – L’utilisation de contrôles, d’ajustements ou des procédures autres que ceux décrits dans
ce document peut résulter en une lumière laser dangereuse. L’utilisation d’instruments optiques avec le
scanner augmentera le danger pour les yeux. Les instruments optiques comprennent les jumelles, les
microscopes et les loupes. Ceci ne comprend pas les lunettes portées par l’utilisateur.

符合性声明
FCC 声明
该款产品符合 《FCC 规则》第 15 部分 B 级产品规定。在家用环境下，该产品可能造成无线电干扰，用
户应采取有效的防范措施。

加拿大符合性声明
该款产品属于 B 级数字设备，符合 《加拿大干扰性设备规范》的所有要求。
兹证明该产品符合 RSS-139-1 标准中对 2.4GHz 扩频规定的各项要求。

欧洲符合性声明
根据 R&TTE 1999/5/EC 与 EMC 89/336/ EEC 指令，特此声明该款产品符合相关要求。

激光信息
unitech PA500 系列产品，已在美国认证，符合 《DHHS/CDRH 21CFR 准则》中 “J 节”所规定的各
项要求，同时符合 IEC 825-1 标准所规定的各项要求。据认证， II 级与 2 级产品不存在危险。 PA500 系
列产品内置可视激光二极管 （VLD），其辐射不超过前述规定的最大限值。扫描器设计合理，正常操
作、用户维护或在规定的维修操作期间，有害激光不会对人造成影响或损害。根据 DHHS/IEC 准则或标
准规定， PA500 系列产品可选激光扫描器模组所要求的激光安全警告标签加贴于内存盒外盖上。详见机
身背面。
注意：如果采用本指南规定之外的控制器或操作步骤或不依此处指示而进行调整，则可能会产生有害激
光。如果在使用扫描器的同时使用光学仪器，则会对眼睛造成更大的影响或损害。所谓的光学仪器包括
双筒望远镜、显微镜与放大镜，不包括使用者所配戴的眼镜。

Appendix B Regulatory Compliance Statements

認證聲明
歐洲符合性聲明
該款產品符合 《FCC 規則》第 15 部分所規定的 B 級產品。在家用環境下，該產品可能造成無線電干
擾。若此，用戶則應採取相應的防範措施。

加拿大符合性聲明
該款產品屬於 B 級數位設備，符合 《加拿大干擾性設備規範》的所有要求。
茲證明該產品符合 RSS-139-1 標準中對 2.4 GHz 擴頻設備所規定的各項要求。

歐洲符合性聲明
根據 R&TTE 1999/5/EC 與 EMC 89/336/ EEC 指令，特此聲明該款產品符合相關要求。

鐳射資訊
unitech PA500 系列產品，經在美國認證，符合 《DHHS/CDRH 21CFR 準則》中 “J 節” 所規定的各
項要求，同時符合 IEC 825-1 標準所規定的各項要求。據認為，II 級與 2 級產品存在危險。PA500 系列
產品內建可視鐳射二極體 （VLD），其輻射不超過前述規範所規定的最大限值。掃描器設計合理，正常
操作、用戶維護或在規定的維修操作期間，有害鐳射不會對人造成影響或損害。根據 DHHS/IEC 準則或
標準規定，PA500 系列產品可選鐳射掃描器模組所要求的鐳射安全警告標籤加貼於記憶體盒外蓋上。詳
見機身背面。
注釋：如果採用本指南規定之外的控制器或操作步驟或不依此處指示而進行調整，則可能會形成有害鐳
射。如果在使用掃描器的同時使用光學儀器，則會對眼睛造成更大的影響或損害。所謂的光學儀器包括
雙筒望遠鏡、顯微鏡與放大鏡，其中不包括使用者所戴用的眼鏡。

各規格との適合
連邦通信委員会声明
これは連邦通信委員会 第 15、クラス B 製品である。国内環境において、この製品は無線妨害を引き
起こす可能 ' があり、その場合使用者は適切な対策の実施が必要になる可能 ' がある。

カナダの準拠声明
本クラス B デジタル装置はカナダの環境規制に関するすべての必要条件を満たしている。
本機は 2.4 ギガヘルツスペクトルデバイスとして、RSS-139-1 の要件に公認される。

欧州統一声明
EC R&TTE 1999/5 および 89/336/EEC 指示に関する統一宣言。

レーザー情報
unitech PA500 シリーズは、米国内において DHHS/CDRH21CFR J 節の要件、および IEC825-1 の要
件を満たすと公認されています。クラス II とクラス 2 の製品が危険であるとは考えられていません。
PA500 シリーズは製品内部に、放出が上記規則で説明される最大限度を超えない範囲の可視レーザー
ダイオード（VLD）を含んでいます。スキャナは、通常操作やメインテナンス等において、有害レー
ザーが人体に触れないよう設計されています。PA500 シリーズの光学レーザースキャナーに対する、
DHHS/IEC によるレーザー安全警戒基準は、本体後部のメモリー部カバーに記載されています。
警告：使用者がここに示す以外の操作・使用法を行った場合、有害なレーザー光線被害をもたらす可
能 ' があります。スキャナに光学機器を使用すると目に対する危険を増加させます。ここでいう光学機
器とは、双眼鏡、顕微鏡、および拡大鏡等を言います。使用者が着用しているメガネは含みません。

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Page Mode                       : UseOutlines
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2007:03:19 15:06:59Z
Creator Tool                    : FrameMaker 7.0
Modify Date                     : 2008:01:04 17:51:29+08:00
Metadata Date                   : 2008:01:04 17:51:29+08:00
Format                          : application/pdf
Title                           : PA500 User's Manual
Creator                         : 8904872
Document ID                     : uuid:e24d978a-88d9-4f8b-8e80-d3f896885b37
Instance ID                     : uuid:fc4c7033-a11a-4534-b978-3a38aac7395a
Has XFA                         : No
Page Count                      : 84
Author                          : 8904872

EXIF Metadata provided by EXIF.tools

Unitech Enterprise Pa500 Users Manual User's

ENTERPRISE PA500 PA500 Users Manual

PA500 to the manual 24523903-74f3-43f5-9950-a407aca192be

Navigation menu

Versions of this User Manual:

Views

Navigation