United Integrated Services ZBM-221 ZigBee Module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1987747
Application ID	wfa9UO2GPqZLHlNu/GX5lw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	27.17kB (339582 bits)
Date Submitted	2013-06-11 00:00:00
Date Available	2013-06-11 00:00:00
Creation Date	2013-05-21 17:06:10
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2013-05-21 17:06:10
Document Title	User Manual
Document Creator	Microsoft® Office Word 2007
Document Author:	steve

UIS
ZigBee Module
User Manual
ZBM-221
1|Pa ge
UIS
Contents
Certification Notices
1.
Overview
2.
Specification
3. Pin Assignment
2|Pa ge
UIS
Certification Notices
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment of f and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Labeling requirements
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
FCC RF Radiation Exposure Statement:
This equipment must be installed and operated in accordance with provided instructions and the
antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20
cm from all persons and must not be co-located or operating in conjunction with any other antenna
or transmitter. End-users and installers must be provided with antenna installation instructions and
transmitter operating conditions for satisfying RF exposure compliance.
3|Pa ge
UIS
Information for the OEMs and Integrators
The following statement must be included with all versions of this document supplied to an OEM or
integrator, but should not be distributed to the end user.
This device is intended for OEM integrators only. Please see the full Grant of Equipment document
for other restrictions. This device must be operated and used with a locally approved access point.
Information To Be Supplied to the End User by the OEM or Integrator
The following regulatory and safety notices must be published in documentation supplied to the end
user of the product or system incorporating an adapter in compliance with local regulations.
Host system must be labeled with "Contains FCC ID:XBTZBM-221, FCC ID displayed on the label.
The label text should be updated according to the table shown in Ordering Guide section of this
document.
4|Pa ge
UIS
1. Overview
ZMB-221 is a wireless communication modem based on IEEE802.15.4, which can be
widely used in home automation and security, automatic meter reading, factory automation,
toys and so on.
2. SPECIFICATION
General Specification
Specification
Transmit Frequency
Modulation
Programmable Output Power
Operation Voltage
Environmental
Operating Temperature
Storage Temperature
Humidity
Mechanical Specification
Dimension (WxHxD, mm)
2.4-GHz IEEE 802.15.4 Compliant RF
Transceiver
2405MHz to 2480MHz
OQPSK
Up to 20 dBm
2.0V~3.6V
-10°C to 70°C
-40°C to 85°C
90% RH Max., Non-Condensing
30.2 x 2.6 x 22.2
5|Pa ge
UIS
3. Pin Assignment
6|Pa ge
Pin
Name
GND
P1_5
P1_4
P1_1
30
VDD
GND
P1_0
10
11
12
13
14
15
16
17
18
19
20
21
31
32
33
22
23
24
25
26
27
28
29
Description
Power Ground
Port 1.5
Port 1.4
Port 1.1 – 20-mA drive
capability
DC input(+2.0 ~3.6V)
Power Ground
Port 1.0 – 20-mA drive
capability
Port 0.6
Port 0.5
Port 0.4
Port 0.3
Port 0.2
Port 0.1
Port 0.0
Reset, active-low
DC input(+2.0 ~3.6V)
Power Ground
DC input(+2.0 ~3.6V)
Power Ground
Power Ground
RF Output
Power Ground
Power Ground
Power Ground
Power Ground
DC input(+2.0 ~3.6V)
P0_6
P0_5
P0_4
P0_3
P0_2
P0_1
P0_0
RESET_N
VDD
GND
VDD
GND
GND
RF
GND
GND
GND
GND
VDD
P2_4/XOSC3
Port 2.4/32.768 kHz XOSC
2K_Q1
P2_3/XOSC3
Port 2.3/32.768 kHz XOSC
2K_Q2
P2_2
Port 2.2
P2_1
Port 2.1
P2_0
Port 2.0
P1_7
Port 1.7
P1_6
Port 1.6
Direction
I/O
I/O
UIS
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
I/O
7|Pa ge

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 7
Language                        : en-US
Tagged PDF                      : Yes
Author                          : steve
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2013:05:21 17:06:10
Modify Date                     : 2013:05:21 17:06:10
Producer                        : Microsoft® Office Word 2007

EXIF Metadata provided by EXIF.tools