Unitron Hearing UWNB0 Hearing aid instruments User Manual UserGuide

Unitron Hearing, Inc. Hearing aid instruments UserGuide

Contents

UserGuide.pdf

Download: Unitron Hearing UWNB0 Hearing aid instruments User Manual UserGuide
Mirror Download [FCC.gov]Unitron Hearing UWNB0 Hearing aid instruments User Manual UserGuide
Document ID2596628
Application ID6s3wVk70/wpHaGLCurupkg==
Document DescriptionUserGuide.pdf
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize180.36kB (2254452 bits)
Date Submitted2015-04-26 00:00:00
Date Available2015-04-26 00:00:00
Creation Date2014-11-27 11:27:52
Producing SoftwareAdobe PDF Library 10.0.1
Document Lastmod2015-03-17 13:54:24
Document TitleUserGuide.pdf
Document CreatorAdobe InDesign CS6 (Macintosh)

Moxi Kiss
behind-the-ear (BTE)
hearing aid guide
Thank you
Thank you for choosing Unitron hearing aids.
At Unitron, we care deeply about people with
hearing loss. We work closely with hearing
healthcare professionals to make advanced,
purpose-driven solutions available to everyone.
Because hearing matters.
This user guide applies to the following models:
N Moxi™ Kiss Pro
N Moxi™ Kiss 800
N Moxi™ Kiss 700
N Moxi™ Kiss 600
N Moxi™ Kiss 500
Your hearing aids
Hearing healthcare professional:________________
___________________________________________
Telephone:__________________________________
Model:_____________________________________
Serial number:_______________________________
Replacement batteries:
Size 312
Warranty:___________________________________
Program 1 is for: _____________________________
Program 2 is for: _____________________________
Program 3 is for: _____________________________
Program 4 is for: _____________________________
Date of purchase:_____________________________
Quick reference
Changing batteries
Table of contents
Low battery warning
2 beeps every
30 minutes
Plus
(+) signs
Your hearing aids at a glance...................................................... 2
Warnings..................................................................................... 4
Putting your hearing aids on your ears....................................... 9
Turning your hearing aids on and off ......................................... 11
Battery information....................................................................12
Battery size
Tips for wearing hearing aids for the first time...........................15
312
Tinnitus masker .........................................................................17
Operating instructions..............................................................20
On/Off
Using the telephone.................................................................. 23
Protecting your hearing aids..................................................... 26
Cleaning your hearing aids........................................................ 27
Signature features of your hearing aids.................................... 29
Troubleshooting guide...............................................................31
Warning to hearing aid dispensers (to comply with the U.S.
Food and Drug Administration (FDA) regulations) .................. 36
On
Off
Open
Information and explanation of symbols..................................38
Compliance information............................................................40
Patient feedback....................................................................... 42
Additional notes........................................................................ 43
Your hearing aids at a glance
1 W
 ire - connects the speaker unit to your
hearing aids
2 Microphone - sound enters your hearing aids
through the microphones
3 	Battery door (on & off) - close the door to turn on
your hearing aids, partly open the door to turn off
your hearing aids. Opening the door all the way
gives you access to change the battery
4 Dome - holds the wire in place in your ear canal
5 	Retention piece - helps prevent the dome and
wire from moving out of the ear canal
6	
Speaker unit - amplifies the sound and sends it
directly into the ear canal
7	
Custom mold - holds the hearing aids in place
and contains the speaker unit
Warnings
	The intended use of hearing aids is to
amplify and transmit sound to the ears and
hereby compensate for impaired hearing.
The hearing aids (specially programmed for
each hearing loss) must only be used by the
intended person. They should not be used
by any other person as they could damage
hearing.
	Hearing aids should only be used as directed
by your physician or hearing healthcare
professional.
	Hearing aids will not restore normal
hearing and will not prevent or improve a
hearing impairment resulting from organic
conditions.
	Do not use your hearing aids in explosion
hazard areas.
	Allergic reactions to hearing aids are unlikely.
However, if you experience itching, redness,
soreness, inflammation or a burning
sensation in or around your ears, inform your
hearing healthcare professional and contact
your physician.
	In the unlikely case that any parts remain
in the ear canal after the removal of the
hearing aid, contact a physician immediately.
	Remove your hearing aids for CT and
MRI scans or for other electromagnetic
procedures.
	Special care should be exercised in wearing
hearing aids when maximum sound
pressure levels exceed 132 decibels. There
may be a risk of impairing your remaining
hearing. Speak with your hearing healthcare
professional to ensure the maximum output
of your hearing aids is suitable for your
particular hearing loss.
Magnet warnings
	Be sure the magnet is securely affixed to the
telephone.
	Keep loose magnets out of reach of children
and pets.
	If the magnet falls into your ear, contact your
hearing healthcare professional.
	If the magnet is swallowed, contact your
physician immediately.
	The magnet may affect some medical
devices or electronic systems. Always keep
the magnet (or the telephone equipped with
the magnet) at least 30 cm (12”) away from
pacemakers, credit cards, floppy disks or
other magnetically sensitive devices.
	Too high distortion during dialing or
phoning may mean that the phone handset
is stressed by the magnet. To avoid any
damage, please move the magnet to another
place on the telephone receiver.
Battery warnings
	Never leave hearing aids or batteries where
small children and pets can reach them.
	Never put hearing aids or batteries in
your mouth. If a hearing aid or battery is
swallowed, call a physician immediately.
Precautions
	The use of hearing aids is only part of
hearing rehabilitation; auditory training and
lip reading instruction may be required as
well.
	In most cases, infrequent use of hearing
aids does not provide full benefit. Once you
have become accustomed to your hearing
aids, wear your hearing aids everyday all
day.
	Your hearing aids use the most modern
components to provide the best possible
sound quality in every listening situation.
However, communication devices such as
digital cell phones can create interference
(a buzzing sound) in hearing aids. If you
experience interference from a cell phone
being used close by, you can minimize this
interference in a number of ways. Switch
your hearing aids to another program, turn
your head in a different direction or locate
the cell phone and move away from it.
Note to hearing healthcare professional
	Domes should never be fitted on patients
with perforated eardrums, exposed middle
ear cavities, or surgically altered ear
canals. In the case of such a condition, we
recommend to use a customized ear mold.
Labeling
The serial number and year of manufacture are
located inside the battery door.
Putting your hearing aids on your ears
Your hearing aids may be color-coded with an
indicator that is visible when the battery door is
open: red = right ear; blue = left ear.
Hearing aids with domes
1.
1.	Hold the wire where it
attaches to the dome and
gently push the dome into
your ear canal. The wire
should lie flush against your
head and not stick out.
2.
2.	Place the hearing aid over
the top of your ear.
3.	Place the retention piece
in your ear so it rests at the
bottom of the opening of
your ear canal.
3.
Hearing aids with custom shells
1.	Hold the custom shell
between your thumb and
index finger. The opening
should be pointing in
towards your ear canal
with the hearing aid
resting upwards above
your ear.
2.	Carefully insert the
custom shell into your
ear. The shell should fit
into your ear snugly and
comfortably.
3.	Place the hearing aid over
the top of your ear.
1.
2.
3.
Turning your hearing aids on and off
Your hearing aids have a three-position battery
door that acts as an on/off switch and that
allows access to the battery compartment.
1.	
On: Close the battery door
1.
1.
fully.
	Note: It may take five seconds
before the hearing aid turns
on. Your hearing healthcare
professional can increase the
start up delay if required.
2.
2. O
 ff: Partially open the battery
door.
3.	
Open: Fully open the battery
door to access and change
the battery.
3.
	Note: When turning your hearing
aid on and off while it is on the
ear, grasp the top and bottom of
the hearing aid with your index
finger and thumb. Use the index
finger of your opposite hand to
open and close the battery door.
10
11
Battery information
To replace the battery, fully open the battery
door for access to the battery compartment.
Low battery warning
Two long beeps indicate the hearing aid battery
is low. After the low battery warning, sounds
may not be as clear. This is normal and can be
fixed by changing the batteries in the hearing
aids.
If you are not able to hear the low battery
warning, your hearing healthcare professional
can change its pitch or loudness. If you prefer, it
can be turned off entirely.
	Your hearing aids are designed to generate a
low battery warning every 30 minutes until you
change the batteries, but depending on the
condition of the batteries, they may die before
another low battery warning occurs. Therefore,
it is recommended that the batteries are
replaced as soon as possible once you hear the
low battery warning.
12
Replacing the battery
1.
1.	Gently swing out the battery
door with your fingernail.
2.	Push the battery with your
thumb and index finger
towards the open side, and
2.
remove.
3.	Insert the new battery into the
battery compartment with the
plus (+) sign on the battery
facing the same way as the
3.
plus (+) sign on the edge of
the battery door. This will
ensure that the battery door
closes properly.
	Note: If the battery is inserted
incorrectly, the hearing aid will
not turn on.
4.
4. Close the battery door.
13
Caring for batteries
Always discard batteries in a safe and
environmentally friendly way.
To prolong battery life, remember to turn your
hearing aids off when not in use, especially
when asleep.
Remove the batteries and keep the battery door
open while hearing aids are not being worn,
especially when asleep. This will allow internal
moisture to evaporate.
Tips for wearing hearing aids for the
first time
• Start in a quiet room at home first to get
•
•
•
•
14
used to the new sound quality. Sounds like
the ticking of a clock, the humming of the
computer, the beep of the microwave or the
rustling of clothes or paper may seem loud
to you at first, because you have not been
hearing them properly for a long time.
Read aloud to yourself and learn to adjust
the volume of your own voice when you are
wearing the hearing aids.
Talk to different people and learn how
to distinguish between different sound
patterns again.
It will take some time before you are
completely used to your hearing aids and
can fully enjoy the benefits.
Wear your hearing aids for as many hours a
day as you can, and for a little longer each
day.
15
• Make notes at the back of this booklet,
write down difficult situations and describe
what any unpleasant noises were like. This
information will help your hearing healthcare
professional to fine-tune the hearing aids
better for your needs.
• Involve your family and friends in this
familiarization period. For example,
ask someone to set the television to a
comfortable volume.
• When you are beginning to get used to
wearing the hearing aids, wear them in more
difficult listening environments such as the
office, at parties or in restaurants. This can
be difficult even for people who can hear
normally. Give yourself time to regain your
ability to hear in these difficult situations.
• Make your hearing aids part of your
everyday life and be patient with yourself
while you are learning to hear sounds
correctly.
16
Tinnitus masker
Unitron’s tinnitus masker is a broadband
sound generator available on the Unitron North
hearing aid platform. It provides a means of
sound enrichment therapy that can be used as
part of a personalized tinnitus management
program to provide temporary relief from
tinnitus.
The underlying principle of sound enrichment
is to provide supplementary noise stimulation
which can help defocus your attention from
your tinnitus and avoid negative reactions.
Sound enrichment, coupled with instructional
counseling, is an established approach to
managing tinnitus.
Tinnitus masker warnings
	Air conduction hearing aids with Unitron’s
tinnitus masker are to be fitted by a hearing
healthcare professional familiar with the
diagnosis and management of tinnitus.
17
	Should you develop any side effects while
using Unitron’s tinnitus masker, you should
discontinue use of the device and seek a
medical evaluation. Side effects include
headaches, nausea, dizziness, heart
palpitations or decrease in auditory function
(such as decreased tolerance to loudness,
speech not as clear or worsening of tinnitus).
	The volume of Unitron’s tinnitus masker
can be set to a level which could lead to
permanent hearing damage when used
for a prolonged period of time. Should the
tinnitus masker be set to such a level in
your hearing aid, your hearing healthcare
professional will advise you of the maximum
amount of time per day you should use the
tinnitus masker. The tinnitus masker should
never be used at uncomfortable levels.
18
Important information
	Unitron’s tinnitus masker generates sounds that
are used as part of your personalized tinnitus
management program to provide temporary
relief from tinnitus. It should always be used as
prescribed by a hearing healthcare professional
who is familiar with the diagnosis and treatment
of tinnitus.
	Good health practice requires that a person
reporting tinnitus have a medical evaluation by
a licensed ear physician before using a sound
generator. The purpose of such an evaluation
is to ensure that medically treatable conditions,
which may be causing tinnitus, are identified
and treated prior to using a sound generator.
	Unitron’s tinnitus masker is intended for adults
18 years of age or older who have both hearing
loss and tinnitus.
19
Operating instructions
Volume control
Your hearing aids can be adjusted with the use
of an optional Unitron remote.
Remote control
The optional remote control allows you to
switch between different listening programs
and change your volume settings.
Program control
Each time you push the button, you will move to
a new program.
Program 1
(e.g. automatic program)
Program 2
(e.g. speech in noise)
Program 3
(e.g. easy-t/telephone)
Program 4 (e.g. music)
1 beep
4 beeps
Easy-t/telephone (see pg 24)
short melody
If your remote control has been configured to
adjust volume, you can adjust the volume level
by pushing the + or – button.
As you change the volume, your hearing aids
will beep.
Volume setting
Recommended volume level
Beeps
1 beep
Turning volume up
short beep
Turning volume down
short beep
Maximum volume level
2 beeps
Minimum volume level
2 beeps
2 beeps
3 beeps
Your hearing aids beep to indicate which
program you are in.
Please see the front of this booklet for a listing
of your personalized programs.
20
21
Tinnitus masker
If your remote control has been configured to
adjust the tinnitus masker, you can adjust the
level of the noise when your hearing aids are
in the tinnitus masker program. To adjust the
noise level:
• Push the + button on your remote control to
increase the tinnitus masker in both hearing
aids
• Push the – button on your remote control
to decrease the tinnitus masker in both
hearing aids
As you change the level, your hearing aids will
beep.
For more information or details, please see
page 17.
22
Using the telephone
As telephones do not all work the same, you
may experience different results from different
phones. You can use many phones by simply
holding the receiver to your ear, without the
need to change to a dedicated telephone
program on your hearing aid. You may need to
move the handset slightly up or back to find the
position that sounds best to you.
Depending on the phone type you use, your
hearing healthcare professional might have
selected a dedicated phone program on your
hearing aids. Your hearing aids may have an
automatic telephone program (easy-t feature),
which automatically switches to a dedicated
telephone program when a telephone receiver
is brought close to one of your hearing aids. You
will hear a short melody to indicate you are in
the telephone (easy-t) program.
When the receiver is moved away from the
hearing aid, it will automatically return to the
previous listening program. If the hearing aid
does not switch to the telephone program
23
automatically when the telephone receiver is
held to the ear, the magnet for easy-t hearing
aids should be attached to the telephone
receiver. The magnet is designed to strengthen
the magnetic field at the ear piece of hearing
aid compatible telephones.
To affix the optional magnet:
1. 	Clean the telephone receiver.
1.
Hold the magnet near
the “listening end” of your
telephone receiver and release
it. The magnet will flip to the
2.
appropriate side and seek
the optimal position on the
telephone receiver.
2. 	Place the double-sided tape
in this optimal position on the 3.
telephone receiver.
3. Attach the magnet to the tape.
24
	Your hearing healthcare professional may also
have set up a phone program that you can
access through the push button on your hearing
aids, or through your optional remote control.
If your hearing aids are configured to work with
the wireless uDirect™ 3 or uStream streamers,
you might benefit from a Bluetooth® hands free
option. Refer to the uDirect or uStream user
guide for more information.
The Binaural Phone feature enables you to hold
a phone to one ear and hear the sound clearly
in both. No accessories are required.
25
Protecting your hearing aids
Cleaning your hearing aids
• Open the battery door when not in use.
Use a soft cloth to clean your hearing aid at the
end of each day, and place it in its case with
the battery door open to allow moisture to
evaporate.
Regular cleaning of the microphone ports with
the supplied cleaning brush will ensure that
your hearing instrument will maintain its sound
quality. Your hearing healthcare professional
can demonstrate this for you.
• Always remove your hearing aids when using
•
•
•
•
•
•
26
hair care products. The hearing aids can
become clogged and cease to function properly.
Do not wear your hearing aids in the bath or
shower or immerse them in water.
If your hearing aids do become wet, do not
attempt to dry them in an oven or microwave.
Do not adjust any controls. Open the battery
doors immediately, and allow your hearing
aids to dry naturally for 24 hours.
Protect your hearing aids from excessive heat
(hair dryer, vehicle glove box or dashboard).
Ensure you do not twist or squeeze the wire
when your hearing aids are placed in their
case.
Regular use of a dehumidifier, such as a
Dri-Aid kit, can help prevent corrosion and
prolong the life of your hearing aids.
Do not drop your hearing aids or knock them
against hard surfaces.
	Ear wax is natural and common. Ensuring your
hearing aids are free of ear wax is an important
step in your daily cleaning and maintenance
routine.
	Never use alcohol to clean your hearing aids,
custom molds or domes.
	Do not use sharp tools to dislodge ear wax.
Sticking household items into your hearing aids
or custom molds can seriously damage them.
27
Cleaning your custom shells and domes
Clean the domes and shells on
the outside daily with a damp
cloth. Avoid getting any water
in and around the speaker units
(microphone shields) and custom shells.
	Note: The wires, speakers, domes or custom
shells should never be rinsed or submerged
in water as water drops may block sound or
damage the electrical components of the
hearing aids.
Domes should be replaced by your hearing
healthcare professional every 3-6 months or
when they become stiff, brittle, or discolored.
If your shells require further cleaning, the
speaker waxguard may be plugged and
require replacing. See your hearing healthcare
professional.
28
Signature features of your
hearing aids
Binaural Phone
The Binaural Phone feature enables you to hold
a phone to one ear and hear the sound clearly
in both ears. No accessories are required.
uDirect 3, uStream and uTV 3
The uDirect, uStream and uTV™ are optional
accessories for your hearing aids.
• uDirect and uStream are streamers
that provide easy, hands-free access to
Bluetooth enabled devices, such as mobile
phones. They can provide remote control
functions to adjust your hearing aids for
increased listening comfort. uDirect also
has a wired audio jack to plug in devices like
MP3 players.
29
• uTV is used with a streamer to send sound
from your TV directly to your hearing aids.
The uTV can also transmit sound from
stereo systems, computers and other audio
sources.
For more information on using the uDirect 3,
uStream or uTV, please see the user guide for
that accessory. For information on how to get a
streamer or uTV accessory, please contact your
hearing healthcare professional.
30
Troubleshooting guide
Cause
Possible remedy
No sound
Not turned on
Turn on
Low/dead battery
Replace battery
Poor battery contact
Consult your hearing
healthcare professional
Battery upside down
Insert battery plus (+) side
up
Custom shells/domes
blocked with ear wax
Clean custom shells/
domes. See “Cleaning
your hearing aids.” Consult
your hearing healthcare
professional
Plugged microphone
opening
Consult your hearing
healthcare professional
31
Cause
Possible remedy
Not loud enough
Low volume
Cause
Possible remedy
Intermittent
Turn up volume; see
hearing healthcare
professional for models
without a volume control or
if problem persists
Low battery
Replace battery
Dirty battery contact
Consult your hearing
healthcare professional
Two long beeps
Low battery
Replace battery
Custom shells/domes
not inserted properly
See “Putting your hearing
aids on your ears.” Remove
and reinsert carefully
Whistling
Change in hearing
Consult your hearing
healthcare professional
Custom shells/domes
not inserted properly
Custom shells/domes
blocked with ear wax
Clean custom shells/
domes. See “Cleaning
your hearing aids.” Consult
your hearing healthcare
professional
See “Putting your hearing
aids on your ears.” Remove
and reinsert carefully
Hand/clothing near ear
Move hand/clothing away
from your ear
Poorly fitting custom
shells/domes
Consult your hearing
healthcare professional
Plugged microphone
opening
32
Low battery
Replace battery
Consult your hearing
healthcare professional
33
Cause
Possible remedy
Cause
Possible remedy
Weak on the telephone
Not clear, distorted
Poorly fitting custom
shells/domes
Consult your hearing
healthcare professional
Custom shells/domes
blocked with ear wax
Clean custom shells/
domes. See “Cleaning
your hearing aids.” Consult
your hearing healthcare
professional
Low battery
Replace battery
Plugged microphone
opening
Consult your hearing
healthcare professional
Telephone not positioned
properly
Move telephone receiver
around ear for clearer
signal. See “Using the
telephone”
Hearing aid requires
adjustment
Consult your hearing
healthcare professional
For any problems not listed in the guide, contact your
hearing healthcare professional.
Custom shells/domes falling out of ear
Poorly fitting custom
shells/domes
Consult your hearing
healthcare professional
Custom shells/domes
not inserted properly
See “Putting your hearing
aids on your ears.” Remove
and reinsert carefully
34
35
Warning to hearing aid dispensers
(to comply with the U.S. Food and Drug
Administration (FDA) regulations)
A hearing aid dispenser should advise a prospective hearing aid
user to consult promptly with a licensed physician (preferably
an ear specialist) before dispensing a hearing aid if the hearing
aid dispenser determines through inquiry, actual observation,
or review of any other available information concerning the
prospective user, that the prospective user has any of the
following conditions: (i) Visible congenital or traumatic deformity
of the ear. (ii) History of active drainage from the ear within the
previous 90 days. (iii) History of sudden or rapidly progressive
hearing loss within the previous 90 days. (iv) Acute or chronic
dizziness. (v) Unilateral hearing loss of sudden or recent onset
within the previous 90 days. (vi) Audiometric air-bone gap equal to
or greater than 15 decibels at 500 hertz (Hz), 1,000 Hz, and 2,000
Hz. (vii) Visible evidence of significant cerumen accumulation or
a foreign body in the ear canal. (viii) Pain or discomfort in the ear.
Special care should be exercised in selecting and fitting a hearing
aid whose maximum sound pressure level exceeds 132 decibels
because there may be risk of impairing the remaining hearing
of the hearing aid user. [This provision is required only for those
hearing aids with a maximum sound pressure capability greater
than 132 decibels (dB).]
Important notice for prospective hearing aid users
Good health practice requires that a person with a hearing loss
have a medical evaluation by a licensed physician (preferably
a physician who specializes in diseases of the ear) before
purchasing a hearing aid.
Licensed physicians who specialize in diseases of the ear
are often referred to as otolaryngologists, otologists or
36
otorhinolaryngologists. The purpose of medical evaluation is
to assure that all medically treatable conditions that may affect
hearing are identified and treated before the hearing aid is
purchased. Following the medical evaluation, the physician will
give you a written statement that states that your hearing loss
has been medically evaluated and that you may be considered
a candidate for a hearing aid. The physician will refer you to an
audiologist or a hearing aid dispenser, as appropriate, for a
hearing aid evaluation. The audiologist or hearing aid dispenser
will conduct a hearing aid evaluation to assess your ability to hear
with and without a hearing aid. The hearing aid evaluation will
enable the audiologist or dispenser to select and fit a hearing aid
to your individual needs. If you have reservations about your ability
to adapt to amplification, you should inquire about the availability
of a trial-rental or purchase-option program. Many hearing aid
dispensers now offer programs that permit you to wear a hearing
aid for a period of time for a nominal fee after which you may
decide if you want to purchase the hearing aid. Federal law restricts
the sale of hearing aids to those individuals who have obtained a
medical evaluation from a licensed physician. Federal law permits
a fully informed adult to sign a waiver statement declining the
medical evaluation for religious or personal beliefs that preclude
consultation with a physician. The exercise of such a waiver is not
in your best health interest and its use is strongly discouraged.
Children with hearing loss
In addition to seeing a physician for a medical evaluation, a
child with a hearing loss should be directed to an audiologist
for evaluation and rehabilitation since hearing loss may cause
problems in language development and the educational and social
growth of a child. An audiologist who is qualified by training and
experience to assist in the evaluation and rehabilitation of a child
with hearing loss is recommended.
37
Information and explanation of
symbols
xxxx
The CE symbol is a confirmation by Unitron that this
Unitron product meets the requirements of the R&TTE
Directive 1999/5/EC on Radio and Telecommunication
Terminal Equipment. The numbers after the CE symbol
are the numbers of the consulted certified bodies
under the above mentioned directives.
This symbol indicates that it is important for the user to
read and take into account the relevant information in
this user guide.
This symbol shall be accompanied by the name and
the address of the manufacturer (who are placing this
device on the market).
Operating conditions:
This device is designed such that it functions without problems or
restrictions if used as intended, unless otherwise noted in these
user guides.
Transport and storage conditions:
Temperature: –20° to +60° Celsius (–4° to +140° Fahrenheit).
Humidity: Up to 90% (non condensing).
The symbol with the crossed-out garbage bin is to make
you aware that this device may not be thrown away
as normal household waste. Please dispose of old or
unused devices, at waste disposal sites intended for
electronic waste, or give your device to your hearing
healthcare professional for disposal. Proper disposal
protects the environment and health.
This symbol indicates that it is important for the user
to pay attention to the relevant warning notices in this
user guide.
Important information for handling and product safety.
Australian EMC and Radiocommunications compliance
label.
This symbol indicates that the products described in
these user instructions adhere to the requirements for
an application part of Type B of EN 60601-1. The surface
of the hearing aid is specified as applicated part of
Type B.
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any
use of such marks by Unitron is under license. Other
trademarks and trade names are those of their
respective owners.
Moxi
Moxi is a trademark of Unitron.
This symbol shall be accompanied by the name and
the address of the authorised representative in the
European Community.
38
39
Compliance information
Declaration of conformity
Unitron hereby declares that this Unitron product meets the
requirements of the Medical Devices Directive 93/42/EEC as
well as the Radio and Telecommunications Terminal Equipment
Directive 1999/5/EC. The full text of the Declaration of Conformity
can be obtained from the manufacturer.
The hearing aid described in this user guide is certified under:
Standard hearing system
USA
FCC ID: VMY-UWNB0
Canada
IC: 2756A-UWNB0
Notice 1
This device complies with Part 15 of the FCC Rules and with RSS210 of Industry Canada. Operation is subject to the following two
conditions:
1) 	this device may not cause harmful interference, and
2) 	this device must accept any interference received, including
interference that may cause undesired operation.
Notice 2
Changes or modifications made to this device not expressly
approved by Unitron may void the FCC authorization to operate
this device.
40
Notice 3
This device has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules
and ICES-003 of Industry Canada. These limits are designed to
provide reasonable protection against harmful interference in
a residential installation. This device generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
device does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• 	Connect the device into an outlet on a circuit different from
that to which the receiver is connected
• 	Consult the dealer or an experienced radio/TV technician for
help
Australia: Supplier Code Number
N15398
New Zealand: Supplier Code Number Z1285
41
Patient feedback
Additional notes
Record your specific needs or concerns and bring to
your first office visit after getting your hearing aids.
___________________________________________
This will help your hearing healthcare professional to
address your needs.
___________________________________________
_________________________________________
___________________________________________
_________________________________________
___________________________________________
_________________________________________
___________________________________________
_________________________________________
_________________________________________
_________________________________________
_________________________________________
42
___________________________________________
___________________________________________
___________________________________________
_________________________________________
___________________________________________
_________________________________________
___________________________________________
_________________________________________
___________________________________________
43
Unitron Hearing
20 Beasley Drive, P.O. Box 9017,
Kitchener, ON N2G 4X1 Canada
Unitron Hearing GmbH
Max-Eyth-Straße 20, 70736
Fellbach-Oeffingen, Germany
For a listing of Unitron group
companies, please visit
www.unitron.com
14-061 029-6012-02
Distributor
unitron.com
630034 302226

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Create Date                     : 2014:11:27 11:27:52-05:00
Creator                         : Adobe InDesign CS6 (Macintosh)
Modify Date                     : 2015:03:17 13:54:24+01:00
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2015:03:17 13:54:24+01:00
Creator Tool                    : Adobe InDesign CS6 (Macintosh)
Instance ID                     : uuid:6f6eac3d-8b1b-4d3a-9465-f055e4ab1981
Original Document ID            : xmp.did:F77F1174072068118083BFA7B79EF3D0
Document ID                     : xmp.id:BE2B621208206811822AFB21053746FF
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:5682487407206811822AFB21053746FF
Derived From Document ID        : xmp.did:670BAB9C0720681192B095957CF336FB
Derived From Original Document ID: xmp.did:F77F1174072068118083BFA7B79EF3D0
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Macintosh)
History Changed                 : /
History When                    : 2014:11:27 11:27:52-05:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 27
EXIF Metadata provided by EXIF.tools
FCC ID Filing: VMY-UWNB0

Navigation menu