Universal Electronics 0602331 Touch Pad Controller User Manual

Universal Electronics Inc Touch Pad Controller

Users Manual

Download: Universal Electronics 0602331 Touch Pad Controller User Manual
Mirror Download [FCC.gov]Universal Electronics 0602331 Touch Pad Controller User Manual
Document ID2440751
Application IDBLGAcK0etp2NgSi+uad59A==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize69.46kB (868298 bits)
Date Submitted2014-11-11 00:00:00
Date Available2014-11-11 00:00:00
Creation Date2014-10-24 18:55:14
Producing SoftwareAcrobat Distiller 7.0.5 (Windows)
Document Lastmod2014-10-24 18:55:14
Document Titleuntitled

Panasonic
Remote Control
Quick Reference Guide
Model: 060‐2331
Setup
1. Insert 2 AAA battery (Heavy duty is supplied with remote or Alkaline, not lithium battery)
CONTROLLING YOUR TV
1. Press Power key to turn on the TV
2. Set TV for pairing mode via menu
3. Press and hold  and  key on the remote to pairing remote with
TV
Touchpad
1. Allow 360 degrees control for menu navigation
Caution
Please read these safety instructions to ensure our personal safety and prevent property damage
Warning
‐ Do not put remote in a fire
‐ Do not disassemble the remote control
‐ Disposal of the remote control
A warning that batteries shall not be exposed to excessive heat such as sunshine, fire or the
like.
Important Safety Instruction
1. Read these instruction
2. Keep these instruction
3. Head all warning
4. Follow all instructions
5. Do not use this apparatus near water
6. Clean only with dry cloth
7. Do not install near any heat source such as radiators, heat registers, stoves or other
apparatus (including amplifiers) that produce heat.
8. Only use attachment/accessories specified by manufacture
9. Refer all servicing to qualified service personnel. Service is required when apparatus has
been damaged in any way, such as liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, dose not operate
normally, or has been dropped.
Specification
Operating Temperature: 0 degree ‐ 45 degree
Battery Type: 2 AAA batteries
COMPLIANCE WITH FCC RULES AND REGULATIONS
15.21
You are cautioned that changes or modifications not expressly approved by the part responsible for
compliance could void the user’s authority to operate the equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
‐Reorient or relocate the receiving antenna.
‐Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
‐Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) this device may not cause interference and
2) this device must accept any interference, including interference that may cause undesired operation of
the device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a
type and maximum (or lesser) gain approved for the transmitter by Industry Canada.
To reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary
for successful communication.
This Class B digital apparatus complies with Canadian ICES‐003
This device complies with Industry Canada licence‐exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the
device.
To comply with the FCC RF exposure compliance requirements, this device and its antenna must
not be co‐located or operating in conjunction with any other antenna or transmitter
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour
l'émetteur par Industrie Canada.
Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres
utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope
rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une
communication satisfaisante.
Cet appareil numérique de classe B est conforme à la norme NMB‐003.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Pour se conformer aux exigences de conformité RF canadienne l'exposition, cet appareil et son
antenne ne doivent pas être co‐localisés ou fonctionnant en conjonction avec une autre antenne
ou transmetteur.
安裝/移除電池
VIERA 觸控板控制器
本觸控板控制器設計用於方便操作,尤其是 VIERA Connect 或網際網路內容的操作。可以用此控制器直觀地操作電視。
● 通過用藍牙無線技術將觸控板控制器註冊到本電視便可以進行使用。初次使用電視時,會在“自動搜尋"中出現註冊 用設定畫面。
● 進行註冊後,無需將此控制器對準電視就可以操作電視(待機開啟/關閉開關除外)。
● 若想使用待機開啟/關閉開關,由於該開關由紅外線控制,請將控制器直接對準電視的遙控訊號接收器
(無需註冊就可以操作該開關。)
1 待機開啟/關閉開關
● 與遙控器按鍵 1 功能相同
2 確定
3 觸控板(參見以下)
4 跳出
5 VIERA 工具/螢幕顯示遙控
● 螢幕顯示遙控:按下並按住可顯示遙控 GUI(圖形用戶界面)。再
次按下可移動圖形用戶界面的位置。(若想改變圖形用戶界面的頁面,
在觸控板上向左/右滑動手指。)
6 音量調高/降低
7 [ 副目錄設定]
8 返回
9 選台調上/調下
10 網際網路([VIERA Connect])
* The drawing is for reference only
將VIERA 觸控板控制器註冊到本電視 (Bluetooth Setup Instruction)
1. 將電視連接電源插座,並開啟電源
● 需要數秒時間才能顯示。
● 若電視上顯示紅色指示燈,請按下遙控器上的待機開啟/關閉開
2. 選擇語言
3. 選擇 [配對]
依照螢幕上的指示說明使用觸控板控制器(隨附)。
4. 按下並按住可首頁+Option
安全注意事項
根據 NCC 低功率電波輻射性電機管理辦法 規定:
第十二條
經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大功率或
變更原設計之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改善
至無干擾時方得繼續使用。
前項合法通信,指依電信法規定作業之無線電通信。
低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

“La operación de este equipo está sujeta a las siguientes dos condiciones”
1.
Es posible que este equipo o dispositivo no cause interferencia perjudicial y
2.
Este equipo debe aceptar cualquier interferencia, incluyendo la que pueda causar
su operación no deseada.
("The operation of this equipment is subject to the following two conditions"
a. This computer or device does not cause harmful interference
b. This device must accept any interference, including interference that may cause an
undesired effect.)

‘Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra
interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência
a sistemas operando em caráter primário.’

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Modify Date                     : 2014:10:24 18:55:14+08:00
Create Date                     : 2014:10:24 18:55:14+08:00
Format                          : application/pdf
Title                           : untitled
Document ID                     : uuid:91697b59-dbf9-410f-b4e8-2831cce41c4d
Instance ID                     : uuid:e2262591-d530-4d91-b6a0-c7a28aba3c2e
Page Count                      : 10
EXIF Metadata provided by EXIF.tools
FCC ID Filing: MG3-0602331

Navigation menu