Universal Electronics 184400 BV LGI RF4CE NextGen Remote Controller User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3424584
Application ID	9lQmZ7tYqWXt620u/TIeWQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	58.12kB (726448 bits)
Date Submitted	2017-06-13 00:00:00
Date Available	2017-12-05 00:00:00
Creation Date	2017-06-12 11:00:24
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2017-06-13 11:28:48
Document Title	Users Manual
Document Creator	Microsoft® Office Word 2007
Document Author:	cmysore

BV LGI RF4CE NextGen
Quick Reference Guide
FCC ID: MG3-184400
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired operation.
ACTIVATING RF
Description:
The RF4CE pairing will initiate IR assisted pairing. This is in case a user wants to manually start the pairing
process of an already paired RCU.
Programming Sequence:
<> → Press and hold together for more than 5 seconds
Pairing in process: (Continuous short blinking of STB Power LED)
If successful pair:
(wait 500ms and 3 short blinks of STB Power LED)
If failed pair:
(long blink of STB Power LED to indicate error)
Results/Conditions:
• If pairing is successful, the remote will overwrite the previous pairing entry.
If the pairing is unsuccessful, the remote will revert back to previous pairing.
RESTORING FACTORY DEFAULT SETTINGS and RESET RF PAIRING
Reset remote control to factory defaults,
• If already paired, send un-pair request to STB, and clear pairing information
• all Quickset settings are cleared,
• Universal TV settings are cleared back to the default IR codes
• Backlight and remote finder settings are returned to the default values and behaviour.
Programming Sequence:
<> ( Press and hold together for more than 5 seconds
If successful:
(STB Power key LED will blink 4 times to indicate success)
If failed:
(STB Power key LED will display an Error blink)
Activación RF
Descripción:
El emparejamiento de RF4CE iniciará IR asistido por emparejamiento. Esto es en caso de que un usuario
quiere iniciar manualmente el proceso de sincronización de un mando ya emparejado.
Secuencia de programación:
<> -> Mantener presionadas estas teclas por más de 5 segundos.
Proceso de Emparejamiento: (Parpadeo corto continuo de STB LED de alimentación).
Si emparejamiento fue un éxito:
(Espere 500ms y luego 3 cortos parpadeos de la led de
alimentación en STB LED).
Si emparejamiento ha fallado
Un largo parpadeo en la led de alimentación STB, el cual
indica error)
Resultados/Condiciones:
-Si emparejamiento ha sido un éxito, el mando sobrescribirá la entrada del emparejamiento anterior.
Si el emparejamiento ha fallado, el mando volverá al enlace anterior.
RESTAURAR VALORES PREDETERMINADOS DE FÁBRICA Y RESTABLECER EMPAREJAMIENTO RF.
Restablecer el mando a los valores predeterminados de fábrica,
- Si ya están emparejados, enviar una solicitud de desemparejar de STB, y borrar la información de
emparejamiento.
- Todos los ajustes de Quickset han sido borrados.
- Configuración de TV universal ha sido borrado, para regresar a los códigos de IR por defecto.
- Los ajustes de retroiluminación y encontrar mando vuelven a los valores predeterminados y
comportamiento.
Secuencia de Programación:
<> -> Mantener presionadas estas teclas por más de 5 segundos
Si emparejamiento fue un éxito:
(La tecla de encendido en STB parpadeará 4 veces el cual
indica éxito)
Si emparejamiento ha fallado:
(La tecla de encencido de STB, mostrará un parpadeo de
error)
COMPLIANCE WITH FCC RULES AND REGULATIONS
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and if not used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase or decrease the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
 Consult the dealer or an experienced remote control/ TV technician for help.
The user is cautioned that changes and modifications made to the equipment without the
approval of manufacturer could void the user's authority to operate this equipment.
FCC Authorization Label
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2 This device must accept any interference received, including interference that may cause
undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Format                          : application/pdf
Creator                         : cmysore
Title                           : 
Create Date                     : 2017:06:12 11:00:24-07:00
Creator Tool                    : Microsoft® Office Word 2007
Modify Date                     : 2017:06:13 11:28:48-07:00
Metadata Date                   : 2017:06:13 11:28:48-07:00
Producer                        : Microsoft® Office Word 2007
Document ID                     : uuid:1553a1dc-85d1-4ea9-a9f1-979e0d2d49ab
Instance ID                     : uuid:e5e60a61-2e36-4ab7-88aa-56e277090c91
Page Count                      : 4
Author                          : cmysore

EXIF Metadata provided by EXIF.tools