Universal Electronics 2001A EchoStar Sage ZHA Remote 2014 User Manual

Universal Electronics Inc EchoStar Sage ZHA Remote 2014

User Manual

REMOTE USER GUIDE
Safety InstructionsYou must keep safety in mind while using this device. Keep these and any other instructions for future reference.Observe Warnings: Carefully follow all warnings on the device and in the operating instructions.Heat: Do NOT place the device near heat sources such as radiators, stoves, heat registers, or other appliances that produce heat.Care and UseCleaning: Do NOT use liquid, abrasive, solvent, or aerosol cleaners. Use a damp cloth for cleaning.When Not in Use: Remove the batteries if this device is to be le unattended or unused for a long period of time.Refer servicing to qualied personnel when a solid object or liquid has fallen onto or into the device.Do NOT attempt to service this device. Refer all servicing to qualied personnel. Opening covers other than the battery cover will void the warranty.Publishing InformationCopyright © 2015. EchoStar Technologies L.L.C., Englewood, Colorado 80112. All rights reserved.The information in this User Guide may change without notice. Revisions may be issued to tell you about such changes.Send comments or questions about this User Guide to techpubs@echostar.com orTechnical Publications, EchoStar Technologies L.L.C, 90 Inverness Circle East, Englewood, Colorado 80112.Document Number: 204884Printed inAll product names, trade names, or corporate names mentioned in this User Guide are acknowledged to be the proprietary property of the registered owners.
1Slide the remote battery cover o.Insert two (2) AA batteries, making sure to match the plus (+) ends with the plus markings on the battery case (opposite each other).Replace the remote battery cover.INSERT THE BATTERIES123
2PAIRING AND UNPAIRING THE REMOTE To Pair the RemoteFor the remote to work with the SAGE receiver, it must be paired. Use the following procedure to pair the remote.Press the RESET button on SAGE’s back panel.On SAGE’s remote, press the CAMERA and LIGHTS buttons simultaneously.SAGE conrms pairing is successful.21To Unpair the RemoteTo unpair a remote from the SAGE receiver, press and hold the THERMOSTAT and BACK buttons simultaneously for 13 seconds. SAGE conrms unpairing is successful.Sec.
3SAGE REMOTEYour SAGE remote provides you the following features to control and manage your home automation and security system.HomeAccess receiver features and settingsLive TVExits out of any menu or the guide and returns to viewing live TVCameraDisplays the Camera menu/settingsThermostatDisplays the temperature settingsLightsDisplays the Lights menu and settingsPiPWatch a program and security video(s) simultaneouslyBackReverses the program or videoPlayPlays a live or recorded programPausePauses a live or recorded programSkip ForwardSkips ahead in a program or videoRecordRecords a programNumber PadEnter a channel number or navigate through menus and program guideSettingsDisplays the Settings menuRulesDisplays the Rules menuArrow Buttons/OKChannel up/down, navigate through menus, and select a desired optionStopStops a program or videoSWAPChanges which video is displayed in which windowSkip BackSkips back in a program or video
4AVOIDING RF INTERFERENCE Because your remote control uses 2.4 GHz ISM band radio frequencies (RF), you might experience interference from other devices transmitting nearby. The instructions in this section describe how to avoid such conicts.Adjusting the AntennaSAGE communicates with its remote control(s) through an antenna that is located within SAGE.Move the SAGE receiver to a dierent location. Place it on as high a surface as possible, above all other equipment if in an entertainment center.Move any nearby antenna or radio equipment away from the SAGE receiver. Do not place an over-the-air antenna, WiFi, Bluetooth®, or ZigBee® devices on or near the SAGE receiver.21
5TROUBLESHOOTINGWhen I press a button on the remote control, the equipment does not do what I expect.What to do: Point the remote control directly at the SAGE receiver, with no objects blocking the signal path. The remote control uses IR signals to control the devices. IR signals travel less than 40 feet and cannot go through walls or other solid objects.If the batteries are missing or dead, replace them with new AA-size batteries.My remote control does not work well when controlling the SAGE receiver.What to do: Move your receiver to dierent locations. For best results, place the receiver as high as possible, above all other equipment in your entertainment center.My remote control seems to have stopped working.What to do: Press one or more buttons on the remote to wake the remote control. The remote control may have gone to sleep to reduce battery drain. If your remote is still unresponsive, take out the batteries and press any button for three seconds, then reinsert the batteries.Use this information if you have a problem using the remote. To solve a particular problem do the following:• Find the information that relates to the problem you are experiencing. Try the suggested solution for that problem.• Make sure your remote control has fresh batteries. If you see the Remote Battery Low warning on your TV screen, it is time to change the batteries. Follow the instructions on page 1.• Make sure you have a direct line of sight between the remote and the receiver.• Visit www.SAGEbyHughes.com.
6TROUBLESHOOTING, CONTINUEDMy SAGE receiver does things even though I have not pressed any remote control buttons.What to do: Check the System Info screen to view a list of remotes paired to your SAGE receiver. Unpair the unwanted remote controls from this screen (see Pairing and Unpairing the Remote on page 2). See Avoiding RF Interference on page 4 for more information.My remote control is not working.What to do: Change the batteries as described on page 1.My SAGE remote control does not work well from far away.What to do: Move the SAGE receiver to dierent locations. For best results, place the receiver as high as possible, above all other equipment in your entertainment center.Move any nearby o-air antenna away from the remote antenna. Do not place an o-air antenna on your SAGE receiver.
7LIMITED WARRANTY
8EXCHANGE PROGRAM
9IF YOU NEED HELPReview this User Guide.See Troubleshooting on page 5.Visit www.SAGEbyHughes.com.312Remote useR Guide7TROUBLESHOOTINGWhen I press a button on the remote control, the equipment does not do what I expect.What to do: Point the remote control directly at the SAGE receiver, with no objects blocking the signal path. The remote control uses IR signals to control the devices. IR signals travel less than 40 feet and cannot go through walls or other solid objects.If the batteries are missing or dead, replace them with new AA-size batteries.My remote control does not work well when controlling the SAGE receiver.What to do: Move your receiver to dierent locations. For best results, place the receiver as high as possible, above all other equipment in your entertainment center.My remote control seems to have stopped working.What to do: Press one or more buttons on the remote to wake the remote control. The remote contorl may have gone to sleep to reduce battery drain. If your remote is still unresponsive, take out the batteries and press any button for three seconds, then reinsert the batteries.Use this information if you have a problem using the remote. To solve a particular problem do the following:• Find the information that relates to the problem you are experiencing. Try the suggested solution for that problem.• Make sure your remote contorl has fresh batteries. If you see the Remote Battery Low warning on your TV screen, it is time to change the batteries. Follow the instructions on page 1.• Make sure you have a direct line of sight between the remote and the receiver.• Visit www.SAGEbyHughes.com.
10This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:1. This device may not cause harmful interference, and2. This device must accept any interference received, including interference that may cause undesired operation.Changes or modications to this device may void your authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by following one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.REGULATORY FACTORS
SAGEbyHughes.comFor all your customer needs visit SAGEbyHughes.com

Navigation menu