Universal Electronics 2004 EchoStar Sling TV BLE Remote 2016 User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3178861
Application ID	QfD9cmrtIEQfnJ8MPaU5Dw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	5.62kB (70194 bits)
Date Submitted	2016-10-28 00:00:00
Date Available	2017-04-10 00:00:00
Creation Date	2016-10-03 13:09:25
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2016-10-20 17:15:18
Document Title	User Manual
Document Creator	Adobe InDesign CC 2015 (Windows)

FEDERAL COMMUNICATIONS COMMISSION and
INDUSTRY CANADA NOTICES
This device complies with FCC Rules Part 15 and Industry Canada RSS-210.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
CAN ICES-3(B)/NMB-3(B).
CAUTION: The user is cautioned that changes and modifications made to the
equipment without the approval of the party responsible for compliance could
void the user’s authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by following one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
AirTV Player UIW4010ECH
IMPORTANT PRODUCT INFORMATION
FCC and IC NOTICES (continued)
RF Exposure information: The AirTV Player device complies with FCC RF radiation
exposure limits set forth for general population. This device must be installed to
provide a separation distance of at least 20cm from all persons and must not be
co-located or operating in conjunction with any other antenna or transmitter.
This device complies with Industry Canada RF radiation exposure limits set forth
for general population (uncontrolled exposure). This device must be installed to
provide a separation distance of at least 20cm from all persons and must not be
co-located or operating in conjunction with any other antenna or transmitter.
Le présent appareil est conforme aux niveaux limites d’exigences d’exposition RF aux
personnes définies par Industrie Canada. Cet appareil doit être installé afin d’offrir
une distance de séparation d’au moins 20cm avec l’utilisateur, et ne doit pas être
installé à proximité ou êtreutilisé en conjonction avec une autre antenne ou un autre
émetteur.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes: (1) il ne doit pas produire de brouillage, et (2) l’utilisateur du dispositif doit
être prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est
susceptible de compromettre le fonctionnement du dispositif.
IMPORTANT SAFETY INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long
periods of time.
Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
SOFTWARE LICENSES
SOFTWARE LICENSES (continued)
TRADEMARK and COPYRIGHT NOTICES
Subject to the terms and conditions of this Agreement and your applicable
Promotion Agreement(s), you are licensed to use the software provided in your
receiver(s), as updated by EchoStar Technologies, L.L.C., its licensors and/or its
suppliers without notice at any time and from time to time, solely in executable
code form, solely in conjunction with lawful operation of the receiver(s) that you
purchased or leased, and solely for the purposes permitted under this Agreement and your applicable Promotion Agreement(s). You may not copy, modify
or transfer any software provided in your receiver(s), or any copy of such software, in whole or in part. You may not reverse-engineer, disassemble, decompile or translate such software, or otherwise attempt to derive its source code,
except to the extent allowed under any applicable laws. You may not rent, lease,
load, resell for profit or distribute any software provided in your receiver(s), or
any part thereof. Such software is licensed, not sold, to you for use only under
the terms and conditions of this license, and EchoStar Technologies, L.L.C., its
licensors and its suppliers reserve all rights not expressly granted to you. Except
as stated above, this license does not grant to you any intellectual property
rights in the software provided in your receiver(s). Any attempt to transfer any
of the rights, duties or obligations of this license is null and void. In the event
that you breach any term or condition of this license, this license will automatically terminate.
The software of this product may contain certain open-source software modules
that are subject to Open Source Software license terms. Such Open Source
Software may change in the future versions of the software.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing, LLC in
the United States and other countries.
A list of the Open Source Software used or provided as embedded into the
current software of the product and their corresponding licenses and version
number are available on Technicolor’s website at the following address:
technicolor.com/en/hi/minisites/open-software—or at another address that
Technicolor may provide from time to time.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and
the double-D symbol are trademarks of Dolby Laboratories.
If and where applicable, depending on the terms of the applicable Open Source
Software licenses, the source code of the Open Source Software is available for
free on Technicolor’s website at the following address:
technicolor.com/en/hi/minisites/open-software.
Copyright 2016 EchoStar Technologies, L.L.C. All rights reserved. AirTV Player
and the AirTV Player logo are trademarks of EchoStar Technologies, L.L.C.
Other products and companies mentioned are the trademarks of their
respective owners and not of EchoStar Technologies, L.L.C.
Warranty, safety, regulatory, and legal information can be found at:
AirTV.net/Warranty.
For avoidance of doubt, Open Source Software is licensed only by the original
owner of the Open Source Software under the terms set forth in the designated
Open Source License.
212367

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Create Date                     : 2016:10:03 13:09:25-06:00
Creator                         : Adobe InDesign CC 2015 (Windows)
Modify Date                     : 2016:10:20 17:15:18-07:00
Language                        : en-US
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2016:10:20 17:15:18-07:00
Creator Tool                    : Adobe InDesign CC 2015 (Windows)
Instance ID                     : uuid:176630fe-1ec2-4b63-8287-760b46fbad14
Original Document ID            : xmp.did:57b3b53c-d6e4-d74f-bb40-5f9237da1339
Document ID                     : xmp.id:02c86136-2d18-a54a-93d8-2476c9f0dc8f
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:68986368-db88-5745-bd89-6922a7f06083
Derived From Document ID        : xmp.did:b4833621-e188-8446-b9e8-c9c29fa94abb
Derived From Original Document ID: xmp.did:57b3b53c-d6e4-d74f-bb40-5f9237da1339
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2015 (Windows)
History Changed                 : /
History When                    : 2016:10:03 13:09:25-06:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 2

EXIF Metadata provided by EXIF.tools