Universal Electronics 2023 BT4D01 (Bluetooth Dongle) User Manual
Universal Electronics Inc BT4D01 (Bluetooth Dongle) Users Manual
Users Manual
User Manual Bluetooth 4.0 Dongle(BT4D01) FCC ID:MG3-2023 1. Description Product Type: BT4D01 This documentation describes the engineering requirements specification of BCM20705 BT Module. This module is designed with Standard USB2.0 interface . 2. Characteristics 2.1 Features: --Bluetooth 4.0 compliant. --Programmable output power control meets Class1,Class2,or Class3 requirements. --Use supply voltages up to 5V. --Supports Broadcom SmartAudioTM,wide-band speech,SBC codec,and packet lose concealment. --Ultra-low power consumption. --ARMTDMI-STM-based microprocessor with integrated ROM and RAM. --Supports mobile and PC applications without external memory. 2.2 Block : 3.1 Technical 1)(Supply voltage): DC5V(Standard USB2.0 ). 2)Receive current(1Mbps): 31mA(Average current). 3) Transmit current(1Mbps): 44mA(Average current). 4)Receive current(EDR): 32mA(Average current). 5) Transmit current(EDR): 41mA(Average current). 6)(Frequency range): 2402~2480MHz 7) Space : 1MHz/2MHz 8) Channel: 79(0 ~78)/40 9) (Sensitivity): ≤-80dBm. 10) (Carrier Frequency Stablility ):±24kHz. (RF input impedance): 50 ohm. 11) 12)(Baseband crystal OSC): 20MHz. 3.2 Environment 1)(Operation temperature range): -10℃~50℃ 2) (Storage temperature range): -20℃~+60℃ 4.1 Size 4.2 Photos Top Bottom 5. BT4D01 5.1 CON BT4D01 Use USB2.0 5.2 Definition PIN NO. Pin Description +5V USB5V Data- USB D- Data+ USB D + GND Ground NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Create Date : 2014:08:29 20:17:39+08:00 Creator Tool : WPS 文字 - [BT4D01规格书.doc] (未响应) Modify Date : 2014:10:24 17:48:47+08:00 Metadata Date : 2014:10:24 17:48:47+08:00 Format : application/pdf Creator : Administrator Title : E:\Work\vin\TVremote\20705 DONGLE\歌华\规格书\BT4D01规格书.doc Document ID : uuid:9598e4b1-dd37-4c71-9ac0-b1d1d24d1a60 Instance ID : uuid:e7866183-7bc5-4557-b581-7aa7299625a6 Page Count : 4 Author : AdministratorEXIF Metadata provided by EXIF.tools