Universal Electronics 3009 DirecTV RC73 with SMT Crystal 2016 User Manual

Universal Electronics Inc DirecTV RC73 with SMT Crystal 2016 Users Manual

Users Manual

Download: Universal Electronics 3009 DirecTV RC73 with SMT Crystal 2016 User Manual
Mirror Download [FCC.gov]Universal Electronics 3009 DirecTV RC73 with SMT Crystal 2016 User Manual
Document ID3441685
Application IDjXSRHu1dRQHRQxO86hpltg==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize12.44kB (155483 bits)
Date Submitted2017-06-27 00:00:00
Date Available2017-06-27 00:00:00
Creation Date2017-05-19 11:23:06
Producing SoftwareAcrobat Distiller 9.0.0 (Windows)
Document Lastmod2017-05-19 11:23:06
Document TitleMicrosoft Word - RC73 Quick Reference Guide Rev1.0.doc
Document CreatorPScript5.dll Version 5.2.2
Document Author: jmendez

DIRECTV®
Universal Remote Control
Quick Reference Guide
CONTROLLING YOUR TV
1. Turn on the TV.
2. Locate the 5‐ digit code for your TV.
3. Turn on the TV.
4. Press and hold MUTE and SELECT at the same time until the green light flashes twice.
5. Using the number keys enter the 5‐digit code for your brand of TV. If performed correctly,
the green light under the TV flashes twice.
6. Aim the remote at your TV and press VOL or MUTE key once. Your TV should ramp up or
down or MUTE. If Volume does not change, repeat steps 3 and 5, trying each code for
your brand until you find the correct code.
Activating RF
To pair the DIRECTV remote control to the STB, perform the following steps:
1.
2.
3.
4.
Press and HOLD MUTE and SELECT at the same time until the green light flashes twice.
Enter digits 961 follow by CH up key.
Using the number keys enter the last six digits of the RID number located behind the STB.
Press and release ENTER key (the green light flashes twice).
Deactivating RF
To deactivate the RF Transmitter on the DIRECTV remote control, perform the following steps:
1. Press and hold MUTE and SELECT at the same time until the green light flashes twice.
2. Using the number keys enter 961
3. Press and Release CH Down. (Green LED flashes four times)
RESTORING FACTORY DEFAULT SETTINGS
To reset all the functions of the remote control to the factory default settings following these
steps:
4. Press and hold MUTE and SELECT at the same time until the green light flashes twice.
5. Using the number keys, enter 9‐8‐1. (The green light flashes 4 times).
COMPLIANCE WITH FCC RULES AND REGULATIONS
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and if not used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase or decrease the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
 Consult the dealer or an experienced remote control/ TV technician for help.
This equipment has been verified to comply with the limits for a Class B computing device,
pursuant to FCC Rules. The user is cautioned that changes and modifications made to the
equipment without the approval of manufacturer could void the user's authority to operate this
equipment.
FCC Authorization Label
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2 This device must accept any interference received, including interference that may cause
undesired operation.
SETUP CODES FOR TV’s
To reset all the functions of the remote control to the factory default settings following these
steps
AOC
Apex Digital
Audiovox
Aventura
Coby
Commercial Solutions
Curtis
Durabrand
Dynex
Element
Emerson
Envision
ESA
Funai
GE
GFM
GoldStar
Haier
Hallmark
Hitachi
iLo
Insignia
LG
LXI
Magnavox
Marantz
Matsushita
Megatron
Memorex
MGA
Mitsubishi
NAD
NEC
Nikko
Norcent
Optimus
Panasonic
Penney
Philco
Philips
Pioneer
Proscan
Proton
Quasar
RadioShack
RCA
Realistic
Samsung
Sansui
Sanyo
Scotch
Scott
Sears
Seiki
Sharp
Sony
Soundesign
1365,
2397
1564
0171
2306,
1447
2397
0178,
2049
1886
1394,
1365
0171
0171
1447,
1886,
0178
2293
0178
1643
1394
2049,
1423,
0156,
1867,
1454
0250
0178
0178,
0178,
1250,
0156,
1797
0178
1365
0250
1480,
0156,
1394,
1867,
1457
1447
0178
0250,
0178
1447,
0178
2051,
0171
1142
0178
0178
0156,
0178
0818,
0810
0178
2402
2314, 2315, 2344, 2348, 3478
0171
1886, 0178, 0171
0178
0171
1423, 1564, 0171, 1517, 2751
1447, 0178
0178
1454, 2372, 0171, 1365
0150
0150
0178, 0150, 1797
0178
0250, 1291
0178
0171
1454, 2372, 1394, 0171, 0690
1291
2434, 2746
0178
0178, 0171
2402
Squareview
Sylvania
Symphonic
TCL
Technics
Teknika
TMK
Toshiba
Vidtech
Viewsonic
Vizio
Wards
Waycon
Westinghouse
Wyse
Zenith
0171
1394,
1394,
2434
0250
0150
0178
1524,
0178
2049,
1758,
0156,
0156
0885,
1365
1423,
1886, 0171
0171
0156
1564, 0885, 1365
2757, 0885
0178
2195, 2293, 2499
0178, 1365

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : jmendez
Create Date                     : 2017:05:19 11:23:06-07:00
Modify Date                     : 2017:05:19 11:23:06-07:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Format                          : application/pdf
Title                           : Microsoft Word - RC73 Quick Reference Guide Rev1.0.doc
Creator                         : jmendez
Document ID                     : uuid:838ef437-2e2b-4b1d-beaa-8e9a0a582e9b
Instance ID                     : uuid:aa62bbd9-cb43-4334-bada-3eea8de120c2
Page Count                      : 5
EXIF Metadata provided by EXIF.tools
FCC ID Filing: MG3-3009

Navigation menu